Heteroallene Insertions into Tin(II) Alkoxide Bonds.

A series of iso-carbamate complexes have been synthesized by the reaction of [SnII(OiPr)2] or [SnII(OtBu)2] with either aryl or alkyl isocyanates, ONC-R (R = 2,4,6-trimethylphenyl (Mes), 2,6-diisopropylphenyl (Dipp), isopropyl (iPr), cyclohexyl (Cy) and tert-butyl (tBu)). In the case of aryl isocyanates, mono-insertion occurs to form structurally characterized complexes [Sn{κ2-N,O-R-NC(OiPr)O}(µ-OiPr)]2 (1: R = Mes, 2: R = Dipp) and [Sn{κ2-N,O-R-NC(OtBu)O}(µ-OtBu)]2 (3: R = Mes, 4: R = Dipp). The complicated solution-state chemistry of these species has been explored using 1H DOSY experiments. In contrast, reactions of tin(II) alkoxides with alkyl isocyanates result in the formation of bis-insertion products [Sn{κ2-N,O-R-NC(OiPr)O}2] (5: R = iPr, and 6: R = Cy) and [Sn{κ2-N,O-R-NC(OtBu)O}2] (7: R = iPr, 8: R = Cy), of which complexes 6-8 have also been structurally characterized. 1H NMR studies show that the reaction of tBu-NCO with either [Sn(OiPr)2] or [Sn(OtBu)2] results in a reversible mono-insertion. Variable-temperature 2D 1H-1H exchange spectroscopy (VT-2D-EXSY) was used to determine the rate of exchange between free tBu-NCO and the coordinated tBu-iso-carbamate ligand for the {OiPr} alkoxide complex, as well as the activation energy (Ea = 92.2 ± 0.8 kJ mol-1), enthalpy (ΔH‡ = 89.4 ± 0.8 kJ mol-1), and entropy (ΔS‡ = 12.6 ± 2.9 J mol-1 K-1) for the process [Sn(OiPr)2] + tBu-NCO ↔ [Sn{κ2-N,O-tBu-NC(OiPr)O}(OiPr)]. Attempts to form Sn(II) alkyl carbonates by the insertion of CO2 into either [Sn(OiPr)2] or [Sn(OtBu)2] proved unsuccessful. However, 119Sn{1H} NMR spectroscopy of the reaction of excess CO2 with [Sn(OiPr)2] reveals the presence of a new Sn(II) species, i.e., [(iPrO)Sn(O2COiPr)], VT-2D-EXSY (1H) of which confirms the reversible alkyl carbonate formation (Ea = 70.3 ± 13.0 kJ mol-1; ΔH‡ = 68.0 ± 1.3 kJ mol-1 and ΔS‡ = -8.07 ± 2.8 J mol-1 K-1).

Exploration of Solid-State vs Solution-State Structure in Contact Ion Pair Systems: Synthesis, Characterization, and Solution-State Dynamics of Zinc Diphenyl Phosphate, [Zn{O2P(OPh)2}2], Donor-Base-Supported Complexes.

A family of zinc phosphate complexes supported by nitrogen donor-base ligands have been synthesized, and their molecular structures were identified in both the solid (X-ray crystallography) and solution state (DOSY NMR spectroscopy). [Zn{O2P(OPh)2}2]∞ (1), formed from the reaction of Zn[N(SiMe3)2]2 with HO(O)P(OPh)2 coordinates to donor-base ligands, i.e., pyridine (Py), 4-methylpyridine (4-MePy), 2,2-bipyridine (bipy), tetramethylethylenediamine (TMEDA), pentamethyldiethylenetriamine (PMDETA), and 1,3,5-trimethyl-1,3,5-triazacyclohexane (Me3-TAC), to produce polymeric 1D structures, [(Py)2Zn{O2P(OPh)2}2]∞ (2) and [(4-MePy)2Zn{O2P(OPh)2}2]∞ (3), the bimetalic systems, [(Bipy)Zn{O2P(OPh)2}2]2 (4), [(TMEDA)Zn{O2P(OPh)2}2]2 (5), and [(Me3-TAC)Zn{O2P(OPh)2}2]2 (7), as well as a mono-nuclear zinc bis-diphenylphosphate complex, [(PMDETA)Zn{O2P(OPh)2}2] (6). 1H NMR DOSY has been used to calculate averaged molecular weights of the species. Studies are consistent with the disassembly of polymeric 3 into the bimetallic species [(Me-Py)2·Zn2{O2P(OPh)2}4], where the Me-Py ligand is in rapid exchange with free Me-Py in solution. Further 1H DOSY NMR studies of 4 and 5 reveal that dissolution of the complex results in a monomer dimer equilibrium, i.e., [(Bipy)Zn{O2P(OPh)2}2]2 ⇆ 2[(Bipy)Zn{O2P(OPh)2}2] and [(TMEDA)Zn{O2P(OPh)2}2]2 ⇆ 2[(TMEDA)Zn{O2P(OPh)2}2], respectively, in which the equilibria lie toward formation of the monomer. As part of our studies, variable temperature 1H DOSY experiments (223 to 313 K) were performed upon 5 in d8-tol, which allowed us to approximate the enthalpy [ΔH = -43.2 kJ mol-1 (±3.79)], entropy [ΔS = 109 J mol-1 K-1 (±13.9)], and approximate Gibbs free energy [ΔG = 75.6 kJ mol-1 (±5.62) at 293 K)] of monomer-dimer equilibria. While complex 6 is shown to maintain its monomeric solid-state structure, 1H DOSY experiments of 7 at 298 K reveal two separate normalized diffusion coefficients consistent with the presence of the bimetallic species [(TAC)2-xZn2{O2P(OPh)2}4], (x = 1 or 0) and free TAC ligand.

Lithium, Tin(II), and Zinc Amino-Boryloxy Complexes: Synthesis and Characterization.

Analogous to the ubiquitous alkoxide ligand, metal boroxide and boryloxy complexes are an underexplored class of hard anionic O- ligand. A new series of amine-stabilized Li, Sn(II), and Zn boryloxy complexes, comprising electron-rich tetrahedral boron centers have been synthesized and characterized. All complexes have been characterized by one-dimensional (1D), two-dimensional (2D), and DOSY NMR, which are consistent with the solid-state structures unambiguously determined via single-crystal X-ray diffraction. Electron-rich µ2- (Sn and Zn) and µ3- (Li) boryloxy binding modes are observed. Compounds 6-9 are the first complexes of this class, with the chelating bis- and tris-phenol ligands providing a scaffold that can be easily functionalized and provides access to the boronic acid pro-ligand, hence allowing facile direct synthesis of the resulting compounds. Computational quantum chemical studies suggest a significant enhancement of the π-donor ability of the amine-stabilized boryloxy ligand because of electron donation from the amine functionality into the p-orbital of the boron atom.

Tin(II) Ureide Complexes: Synthesis, Structural Chemistry, and Evaluation as SnO Precursors.

In an attempt to tailor precursors for application in the deposition of phase pure SnO, we have evaluated a series of tin (1-6) ureide complexes. The complexes were successfully synthesized by employing N,N'-trialkyl-functionalized ureide ligands, in which features such as stability, volatility, and decomposition could be modified with variation of the substituents on the ureide ligand in an attempt to find the complex with the ideal electronic, steric, or coordinative properties, which determine the fate of the final products. The tin(II) ureide complexes 1-6 were synthesized by direct reaction [Sn{NMe2}2] with aryl and alkyl isocyanates in a 1:2 molar ratio. All the complexes were characterized by NMR spectroscopy as well as elemental analysis and, where applicable, thermogravimetric (TG) analysis. The single-crystal X-ray diffraction studies of 2, 3, 4, and 6 revealed that the complexes crystallize in the monoclinic space group P2(1)/n (2 and 4) or in the triclinic space group P-1 (3 and 6) as monomers. Reaction with phenyl isocyanate results in the formation of the bimetallic species 5, which crystallizes in the triclinic space group P-1, a consequence of incomplete insertion into the Sn-NMe2 bonds, versus mesityl isocyanate, which produces a monomeric double insertion product, 6, under the same conditions, indicating a difference in reactivity between phenyl isocyanate and mesityl isocyanate with respect to insertion into Sn-NMe2 bonds. The metal centers in these complexes are all four-coordinate, displaying either distorted trigonal bipyramidal or trigonal bipyramidal geometries. The steric influence of the imido-ligand substituent has a clear effect on the coordination mode of the ureide ligands, with complexes 2 and 6, which contain the cyclohexyl and mesityl ligands, displaying κ2-O,N coordination modes, whereas κ2-N,N' coordination modes are observed for the sterically bulkier tert-butyl and adamantyl derivatives, 3 and 4. The thermogravimetric analysis of the complexes 3 and 4 exhibited excellent physicochemical properties with clean single-step curves and low residual masses in their TG analyses suggesting their potential utility of these systems as MOCVD and ALD precursors.

Synthetic, Structural, and Computational Studies on Heavier Tetragen and Chalcogen Triazenide Complexes.

The syntheses of the triazenide complexes [{N(NDipp)2}2M] (Dipp = 2,6-di-isopropylphenyl; M = Ge(II) (1), Sn(II) (2), Pb(II) (3), and Te(II) (5)) are described for the first time. These compounds have been characterized by single-crystal X-ray diffraction and heteronuclear NMR spectroscopy. Density functional theory calculations were employed to confirm the presence and nature of the stereochemically active lone pairs in 1-5, alongside the Gibbs energy changes for their general synthesis, which enable the rationalization of observed reactivities.

Aerosol-Assisted Chemical Vapor Deposition of ZnS from Thioureide Single Source Precursors.

A family of 12 zinc(II) thoureide complexes, of the general form [{L}ZnMe], [{L}Zn{N(SiMe3)2}], and [{L}2Zn], have been synthesized by direct reaction of the thiourea pro-ligands iPrN(H)CS(NMe2) H[L1], CyN(H)CS(NMe2) H[L3], tBuN(H)CS(NMe2) H[L2], and MesN(H)CS(NMe2) H[L4] with either ZnMe2 (1:1) or Zn{N(SiMe3)2}2 (1:1 and 2:1) and characterized by elemental analysis, NMR spectroscopy, and thermogravimetric analysis (TGA). The molecular structures of complexes [{L1}ZnMe]2 (1), [{L2}ZnMe]2] (2), [{L3}ZnMe]∞ (3), [{L4}ZnMe]2] (4), [{L1}Zn{N(SiMe3)2}]2 (5), [{L2}Zn{N(SiMe3)2}]2 (6), [{L3}Zn{N(SiMe3)2}]2] (7), [{L4}Zn{N(SiMe3)2}]2] (8), [{L1}2Zn]2 (9), and [{L4}2Zn]2 (12) have been unambiguously determined using single crystal X-ray diffraction studies. Thermogravimetric analysis has been used to assess the viability of complexes 1-12 as single source precursors for the formation of ZnS. On the basis of TGA data compound 9 was investigated for its utility as a single source precursor to deposit ZnS films on silica-coated glass and crystalline silicon substrates at 150, 200, 250, and 300 °C using an aerosol assisted chemical vapor deposition (AACVD) method. The resultant films were confirmed to be hexagonal-ZnS by Raman spectroscopy and PXRD, and the surface morphologies were examined by SEM and AFM analysis. Thin films deposited from (9) at 250 and 300 °C were found to be comprised of more densely packed and more highly crystalline ZnS than films deposited at lower temperatures. The electronic properties of the ZnS thin films were deduced by UV-Vis spectroscopy to be very similar and displayed absorption behavior and band gap (Eg = 3.711-3.772 eV) values between those expected for bulk cubic-ZnS (Eg = 3.54 eV) and hexagonal-ZnS (Eg = 3.91 eV).

Cobalt(I) Olefin Complexes: Precursors for Metal-Organic Chemical Vapor Deposition of High Purity Cobalt Metal Thin Films.

We report the synthesis and characterization of a family of organometallic cobalt(I) metal precursors based around cyclopentadienyl and diene ligands. The molecular structures of the complexes cyclopentadienyl-cobalt(I) diolefin complexes are described, as determined by single-crystal X-ray diffraction analysis. Thermogravimetric analysis and thermal stability studies of the complexes highlighted the isoprene, dimethyl butadiene, and cyclohexadiene derivatives [(C5H5)Co(η(4)-CH2CHC(Me)CH2)] (1), [(C5H5)Co(η(4)-CH2C(Me)C(Me)CH2)] (2), and [(C5H5)Co(η(4)-C6H8)] (4) as possible cobalt metal organic chemical vapor deposition (MOCVD) precursors. Atmospheric pressure MOCVD was employed using precursor 1, to synthesize thin films of metallic cobalt on silicon substrates under an atmosphere (760 torr) of hydrogen (H2). Analysis of the thin films deposited at substrate temperatures of 325, 350, 375, and 400 °C, respectively, by scanning electron microscopy and atomic force microscopy reveal temperature-dependent growth features. Films grown at these temperatures are continuous, pinhole-free, and can be seen to be composed of hexagonal particles clearly visible in the electron micrograph. Powder X-ray diffraction and X-ray photoelectron spectroscopy all show the films to be highly crystalline, high-purity metallic cobalt. Raman spectroscopy was unable to detect the presence of cobalt silicides at the substrate/thin film interface.

Attenuated Organomagnesium Activation of White Phosphorus.

Sequential reactions between a 2,6-diisopropylphenyl-substituted ß-diketiminato magnesium n-butyl derivative and P4 allow the highly discriminating synthesis of unusual [nBu2P4](2-) and [nBu2P8](2-) cluster dianions.

Solid-state interconversions: unique 100 % reversible transformations between the ground and metastable states in single-crystals of a series of nickel(II) nitro complexes.

The solid-state, low-temperature linkage isomerism in a series of five square planar group 10 phosphino nitro complexes have been investigated by a combination of photocrystallographic experiments, Raman spectroscopy and computer modelling. The factors influencing the reversible solid-state interconversion between the nitro and nitrito structural isomers have also been investigated, providing insight into the dynamics of this process. The cis-[Ni(dcpe)(NO2)2] (1) and cis-[Ni(dppe)(NO2)2] (2) complexes show reversible 100 % interconversion between the η(1)-NO2 nitro isomer and the η(1)-ONO nitrito form when single-crystals are irradiated with 400 nm light at 100 K. Variable temperature photocrystallographic studies for these complexes established that the metastable nitrito isomer reverted to the ground-state nitro isomer at temperatures above 180 K. By comparison, the related trans complex [Ni(PCy3)2(NO2)2] (3) showed 82 % conversion under the same experimental conditions at 100 K. The level of conversion to the metastable nitrito isomers is further reduced when the nickel centre is replaced by palladium or platinum. Prolonged irradiation of the trans-[Pd(PCy3)2(NO2)2] (4) and trans-[Pt(PCy3)2(NO2)2] (5) with 400 nm light gives reversible conversions of 44 and 27 %, respectively, consistent with the slower kinetics associated with the heavier members of group 10. The mechanism of the interconversion has been investigated by theoretical calculations based on the model complex [Ni(dmpe)Cl(NO2)].

Synthesis and materials chemistry of bismuth tris-(di-i-propylcarbamate): deposition of photoactive Bi2O3 thin films.

The bismuth carbamate Bi(O2CNPr(i)2)3, a tetramer in the solid-state, has been synthesized and used to deposit mixtures of bismuth oxides by aerosol-assisted chemical vapor deposition (AACVD). The nature of the deposited oxide is a function of both temperature and run-time. Initially, δ-Bi2O3 is deposited, over which grows a thick layer of ß-Bi2O3 nanowires, the latter having an increasing degree of preferred orientation at higher deposition temperatures. The photocatalytic activity of a thin film of δ-Bi2O3 for the degradation of methylene blue dye was found to be similar to that of a commercial TiO2 film on glass, while the film overcoated with ß-Bi2O3 nanowires was less active. Exposure of Bi(O2CNPr(i)2)3 to controlled amounts of moist air affords the novel oxo-cluster Bi8(O)6(O2CNPr(i)2)12, whose structure has also been determined.

Zinc and cadmium thioamidate complexes: rational design of single-source precursors for the AACVD of ZnS.

A series of zinc(II) thioamidate complexes [Zn{SC(iPr)NR}2]n for R = iPr (n = 2) (2), tBu (3) (n = 1), Ph (4) (n = 2) and Cy (5) (n = 2) and one cadmium(II) thioamidate complex [Cd{SC(iPr)NtBu}2]3, (6), were designed and synthesised as single-source precursors for AACVD ZnS and CdS. Solid-state structures of all four zinc(II) compounds revealed distorted tetrahedral or trigonal bipyramidal geometries, with varying tendencies for dimeric association, mediated by {Zn-S} bridging bonds. The thermogravimetric analysis identified the {tBu} derivertive, 3, as the most promising precursor based on its low decomposition onset (118 °C) and clean conversion to ZnS. This was attributed to the greater availability of ß-hydrogen atoms promoting the pyrolysis mechanism. The corresponding cadmium thioamide 6 was found to crystallise as a trimetallic molecule which lacked the thermal stability to be considered viable for AACVD. Hence, 3 was used to deposit ZnS thin films by AACVD at 200-300 °C. Powder X-ray diffraction confirmed phase-pure growth of hexagonal wurtzite ZnS, with approximate crystallite sizes of 15-20 nm. Scanning electron microscopy revealed densely packed spherical nanoclusters. The morphology and crystallinity were most consistent for depositions between 250-300 °C. Energy dispersive X-ray spectroscopy indicated slightly sulfur-deficient stoichiometries.

Optimizing Amorphous Molybdenum Sulfide Thin Film Electrocatalysts: Trade-Off between Specific Activity and Microscopic Porosity.

Amorphous molybdenum sulfide (a-MoSx) is a promising candidate to replace noble metals as electrocatalysts for the hydrogen evolution reaction (HER) in electrochemical water splitting. So far, understanding of the activity of a-MoSx in relation to its physical (e.g., porosity) and chemical (e.g., Mo/S bonding environments) properties has mostly been derived from bulk electrochemical measurements, which provide limited information about electrode materials that possess microscopic structural heterogeneities. To overcome this limitation, herein, scanning electrochemical cell microscopy (SECCM) has been deployed to characterize the microscopic electrochemical activity of a-MoSx thin films (ca. 200 nm thickness), which possess a significant three-dimensional structure (i.e., intrinsic porosity) when produced by electrodeposition. A novel two-step SECCM protocol is designed to quantitatively determine spatially resolved electrochemical activity and electrochemical surface area (ECSA) within a single, high-throughput measurement. It is shown for the first time that although the highest surface area (e.g., most porous) regions of the a-MoSx film possess the highest total activity (measured by the electrochemical current), they do not possess the highest specific activity (measured by the ECSA-normalized current density). Instead, the areas of highest specific activity are localized at/around circular structures, coined "pockmarks", which are tens to hundreds of micrometers in size and ubiquitous to a-MoSx films produced by electrodeposition. By coupling this technique with structural and elemental composition analysis techniques (scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy) and correlating ECSA with activity and specific activity across SECCM scans, this work furthers the understanding of structure-activity relations in a-MoSx and highlights the importance of local measurements for the systematic and rational design of thin film catalyst materials.

From alkaline earth to coinage metal carboranyls.

The ß-diketiminato calcium and magnesium complexes, [(BDI)MgnBu] and [(BDI)CaH]2 (BDI = HC{C(Me)NDipp}2; Dipp = 2,6-di-isopropylphenyl), react with ortho-carborane (o-C2B10H12) to provide the respective [(BDI)Ae(o-C2B10H11)] (Ae = Mg or Ca) complexes. While the lighter group 2 species is a monomer with magnesium in a distorted trigonal planar environment, the heavier analogue displays a puckered geometry at calcium in the solid state due to Ca⋯H-B intermolecular interactions. These secondary contacts are, however, readily disrupted upon addition of THF to provide the 4-coordinate monomer, [(BDI)Ca(THF)(o-C2B10H11)]. [(BDI)Mg(o-C2B10H11)] was reacted with [NHCIPrMCl] (NHCIPr = 1,3-bis(isopropyl)imidazol-2-ylidene; M = Cu, Ag, Au) to provide [NHCIPrM(o-C2B10H11)], rare C-bonded examples of coinage metal derivatives of unsubstituted (o-C2B10H11)- and confirming the alkaline earth compounds as viable reagents for the transmetalation of the carboranyl anion.

Amplified seasonality in western Europe in a warmer world.

Documenting the seasonal temperature cycle constitutes an essential step toward mitigating risks associated with extreme weather events in a future warmer world. The mid-Piacenzian Warm Period (mPWP), 3.3 to 3.0 million years ago, featured global temperatures approximately 3°C above preindustrial levels. It represents an ideal period for directed paleoclimate reconstructions equivalent to model projections for 2100 under moderate Shared Socioeconomic Pathway SSP2-4.5. Here, seasonal clumped isotope analyses of fossil mollusk shells from the North Sea are presented to test Pliocene Model Intercomparison Project 2 outcomes. Joint data and model evidence reveals enhanced summer warming (+4.3° ± 1.0°C) compared to winter (+2.5° ± 1.5°C) during the mPWP, equivalent to SSP2-4.5 outcomes for future climate. We show that Arctic amplification of global warming weakens mid-latitude summer circulation while intensifying seasonal contrast in temperature and precipitation, leading to an increased risk of summer heat waves and other extreme weather events in Europe's future.

Cobalt(III) diazabutadiene precursors for metal deposition: nanoparticle and thin film growth.

We report the synthesis and characterization of a family of cobalt(III) metal precursors, based around cyclopentadienyl and diazabutadiene ligands. The molecular structure of the complexes cyclopentadienyl-Cobalt(III)(N,N'-dicyclohexyl-diazabutadiene) (2c) and cyclopentadienyl-Cobalt(III)(N,N'-dimesityl-diazabutadiene) (2d) are described, as determined by single crystal X-ray diffraction analysis. Thermogravimetric analysis of the complexes highlighted the isopropyl derivative CpCo((i)Pr2-dab) (2a) as a possible cobalt metal chemical vapor deposition (CVD) precursor. Atmospheric pressure CVD (AP-CVD) was employed using precursor 2a to synthesize thin films of metallic cobalt on silicon substrates under an atmosphere of hydrogen (H2). Analysis of the thin films deposited at substrate temperatures of 250 °C, 275 °C, 300 °C, 325 °C, and 350 °C, respectively, by scanning electron microscopy (SEM) and atomic force microscopy (AFM) reveal temperature dependent growth features: films grown at 325 and 350 °C are continuous and pinhole free, whereas those films grown at substrate temperatures of 250 °C, 275 °C, and 300 °C consist of crystalline nanoparticles. Powder X-ray diffraction (PXRD) and X-ray photoelectron spectroscopy (XPS) all show the films to be high purity metallic cobalt. Raman spectroscopy has also been used to prove the absence of cobalt silicides at the substrate/thin film interface.

Green Alternatives to Zinc Dialkyldithiophosphates: Vanadium Oxide-Based Additives.

A functionalized vanadyl(IV) acetylacetonate (acac) complex has been found to be a superior and highly effective antiwear agent, affording remarkable wear protection, compared to the current industry standard, zinc dialkyldithiophosphates (ZDDPs). Analysis of vanadium speciation and the depth profile of the active tribofilms by a combination of X-ray absorption near-edge structure (XANES), X-ray photoelectron spectroscopy (XPS), and near-edge X-ray absorption fine structure (NEXAFS) analyses indicated a mixed-valence oxide composite, comprising V(III), V(IV), and V(V) species. A marked difference in composition between the bulk and the surfaces of the tribofilms was found. The vanadyl(VI) acac precursor has the potential to reduce or even replace ZDDP, which would represent a paradigm shift in the antiwear agent design. A major benefit relative to ZDDPs is the absence of S and P moieties, eliminating the potential for forming noxious and environmentally harmful byproducts of these elements.

Multinuclear copper(I) guanidinate complexes.

A series of multinuclear Copper(I) guanidinate complexes have been synthesized in a succession of reactions between CuCl and the lithium guanidinate systems Li{L} (L = Me(2)NC((i)PrN)(2) (1a), Me(2)NC(CyN)(2) (1b), Me(2)NC((t)BuN)(2)(1c), and Me(2)NC(DipN)(2) (2d) ((i)Pr = iso-propyl, Cy = cyclohexyl, (t)Bu = tert-butyl, and Dip = 2,6-disopropylphenyl) made in situ, and structurally characterized. The di-copper guanidinates systems with the general formula [Cu(2){L}(2)] (L = {Me(2)NC((i)PrN)(2)} (2a), {Me(2)NC(CyN)(2)} (2b), and {Me(2)NC(DipN)(2)} (2d) differed significantly from related amidinate complexes because of a large torsion of the dimer ring, which in turn is a result of transannular repulsion between adjacent guanidinate substituents. Attempts to synthesis the tert-butyl derivative [Cu(2){Me(2)NC((t)BuN)(2)}(2)] result in the separate formation and isolation of the tri-copper complexes [Cu(3){Me(2)NC((t)BuN)(2)}(2)(µ-NMe(2))] (3c) and [Cu(3){Me(2)NC((t)BuN)(2)}(2)(µ-Cl)] (4c), both of which have been unambiguously characterized by single crystal X-ray diffraction. Closer inspection of the solution state behavior of the lithium salt 1c reveals a previously unobserved equilibrium between 1c and its starting materials, LiNMe(2) and N,N'-di-tert-butyl-carbodiimide, for which activation enthalpy and entropy values of ΔH(‡) = 48.2 ± 18 kJ mol(-1) and ΔS(‡) = 70.6 ± 6 J/K mol have been calculated using 1D-EXSY NMR spectroscopy to establish temperature dependent rates of exchange between the species in solution. The molecular structures of the lithium complexes 1c and 1d have also been determined and shown to form tetrameric and dimeric complexes respectively held together by Li-N and agostic Li···H-C interactions. The thermal chemistry of the copper complexes have also been assessed by thermogravimetric analysis.

Synthesis and structure of 6-aminofulvene-2-aldiminate complexes.

We report here a synthetic route to bis(N,N'-aryl)-6-aminofulvene-2-aldimine (AFA) ligand systems, specifically Ph(2)-AFAH and Dip(2)-AFAH. The synthesis and structural characterization of a series of Cu(I) complexes [(Ph(2)-AFA)Cu(CNPh)(2)] (2), [(Ph(2)-AFA)Cu(CN(i)Pr)] (3), and [(Dip(2)-AFA)Cu(CN(i)Pr)] (4), from the reaction of the corresponding lithiated AFA systems with Cu-Cl derivatives are reported; notably in the case of [(Ph(2)-AFA)Cu(CNPh)(2)] studies have revealed the existence of two structural isomers (2a and 2b), both of which can be isolated and structurally characterized. Density functional theory (DFT) calculations suggest that the two crystal forms are comparatively close in energy, and geometry optimization reveals a convergence of these two forms to a geometry that more closely resembles the solid-state structure of isomer 2b, having a CH···π interaction. The reactions of the AFA compounds Ph(2)-AFAH and Dip(2)-AFAH with ZnMe(2) and AlMe(3) have also been investigated, and the results of these reactions are described here.

Bis(tert-butyl isocyanide-κC)[4-fluoro-N-({2-[N-(4-fluorophenyl)carboximidoyl]cyclopenta-2,4-dien-1-ylidene}methyl)anilinido-κ2N,N']copper(I).

The solid-state structure of the title compound, [Cu(C(19)H(13)F(2)N(2))(C(5)H(9)N)(2)], shows that the Cu(I) centre adopts a distorted tetrahedral coordination geometry, being coordinated by two N atoms of the 6-aminofulvene-2-aldimine (AFA) chelating ligand and by the bridgehead C atoms of the two isocyanide ligands. The cyclopentadienyl and imine components of the AFA ligand are approximately coplanar, with an angle between the planes of 5.00 (3)°. The Cu atom lies 0.6460 (3) Å above the imine plane defined by the N and C atoms of the seven-membered metallocycle. There is also an uncommon C-H···Cu anagostic interaction, with an intramolecular Cu···H distance of 2.67 Å, which is less than the sum of the van der Waals radii.

Evaluation of Sn(II) aminoalkoxide precursors for atomic layer deposition of SnO thin films.

We have successfully prepared and structurally characterized a family of eight tin(II) heteroleptic complexes, [Sn(NR2)(ON)]x (NR2 = NMe2 (1a-d) or N(SiMe3)2 (2a-d); x = 1 or 2) and four homoleptic systems, [Sn(κ2-ON)2] (3a-d) from a series of aminoalcohols and fluorinated aminoalcohols (H{ON}) having a different number of methyl/trifluoromethyl substituents at the α-carbon atom, [HOC(R1)(R2)CH2NMe2] (R1 = R2 = H (H{dmae}) (a); R1 = H, R2 = Me (H{dmap}) (b); R1 = R2 = Me (H{dmamp}) (c); R1 = R2 = CF3 (H{Fdmamp}) (d)). The synthetic route used reactions of either [Sn{N(SiMe3)2}2] or [Sn(NMe2)2] with one or two equivalents of the aminoalcohols (a-d) in dry aprotic solvents leading to elimination of amines and formation of the Sn(II) species 1a-d, 2a-d and 3a-d respectively. All complexes were thoroughly characterized by NMR spectroscopy (1H, 13C, 19F, and 119Sn) as well as single-crystal X-ray diffraction studies. In all case the solid state molecular structures of the complexes have been unambiguously established: the solid state structures 1a-b and 1c are dimeric with central {Sn2N2} cores resulting from bridging {µ2-NMe2} units, in which the Sn(II) atoms are four-coordinate. In contrast, the solid state structures of complexes 1c and 2a-c possess similarly dimeric structures, with four-coordinate Sn(II) atoms, in which the oxygen atoms of the {ON} ligand bridge two Sn(II) centres to form dimers with a central {Sn2O2} core. Uniquely in this study, 2d, [Sn(κ2-O,N-OCMe2CH2NMe2){N(SiMe3)2}] is monomeric with a three coordinate Sn(II) centre. The homoleptic complexes 3a-d are all isostructural with monomeric four-coordinate structures with disphenoidal geometries. Solution state NMR studies reveal complicated ligand exchange processes in the case of the heteroleptic complexes 1a-d and 2a-d. Contrastingly, the homoleptic systems 3a-d show no such behaviour. While complexes 1a-d and 2a-d displayed either poor thermal stability or multistep thermal decomposition processes, the thermal behaviour of the homoleptic complexes, 3a-d, was investigated in order to determine the effects, if any, of the degree of fluorination and asymmetry of the aminoalkoxide ligands on the suitability of these complexes as ALD precursors for the deposition of SnO thin films.