Iron-catalyzed synthesis of substituted 3-arylquinolin-2(1H)-ones via an intramolecular dehydrogenative coupling of amido-alcohols.

Here we report an iron-complex-catalyzed synthesis of various mono- and di-substituted quinolin-2(1H)-ones achieved via the intramolecular acceptorless dehydrogenative cyclization of amido-alcohols. This approach for the synthesis of N-heterocycles has provided access to underdescribed disubstituted quinolinones and represents an alternative to the well-known palladium-catalyzed coupling reactions.

Latest Trends in Lipase-Catalyzed Synthesis of Ester Carbohydrate Surfactants: From Key Parameters to Opportunities and Future Development.

Carbohydrate-based surfactants are amphiphilic compounds containing hydrophilic moieties linked to hydrophobic aglycones. More specifically, carbohydrate esters are biosourced and biocompatible surfactants derived from inexpensive renewable raw materials (sugars and fatty acids). Their unique properties allow them to be used in various areas, such as the cosmetic, food, and medicine industries. These multi-applications have created a worldwide market for biobased surfactants and consequently expectations for their production. Biobased surfactants can be obtained from various processes, such as chemical synthesis or microorganism culture and surfactant purification. In accordance with the need for more sustainable and greener processes, the synthesis of these molecules by enzymatic pathways is an opportunity. This work presents a state-of-the-art lipase action mode, with a focus on the active sites of these proteins, and then on four essential parameters for optimizing the reaction: type of lipase, reaction medium, temperature, and ratio of substrates. Finally, this review discusses the latest trends and recent developments, showing the unlimited potential for optimization of such enzymatic syntheses.

Measurement of Minute Liquid Volumes of Chiral Molecules Using In-Fiber Polarimetry.

We report an optofluidic method that enables to efficiently measure the enantiomeric excess of chiral molecules at low concentrations. The approach is to monitor the optical activity induced by a Kagome-lattice hollow-core photonic crystal fiber filled with a sub-µL volume of chiral compounds. The technique also allows monitoring the enzymatic racemization of R-mandelic acid.

Low-noise supercontinuum generation in chiral all-normal dispersion photonic crystal fibers.

We present the advantages of supercontinuum generation in chiral, therefore circularly birefringent, all-normal dispersion fibers. Due to the absence of nonlinear power transfer between the polarization eigenstates of the fiber, chiral all-normal dispersion fibers do not exhibit any polarization instabilities and thus are an ideal platform for a low-noise supercontinuum generation. By pumping a chiral all-normal dispersion fiber at 802 nm, we obtained an octave-spanning, robustly circularly polarized supercontinuum with a low noise.

Tunable fiber source of entangled UV-C and infrared photons.

Pairs of entangled photons-biphotons-are indispensable in quantum applications. However, some important spectral ranges, like the ultraviolet, have been inaccessible to them so far. Here, we use four-wave mixing in a xenon-filled single-ring photonic crystal fiber to generate biphotons with one of the photons in the ultraviolet and its entangled partner in the infrared spectral range. We tune the biphotons in frequency by varying the gas pressure inside the fiber and thus tailoring the fiber dispersion landscape. The ultraviolet photons are tunable from 271 nm to 231 nm and their entangled partners, from 764 nm to 1500 nm, respectively. Tunability up to 192 THz is achieved by adjusting the gas pressure by only 0.68 bar. At 1.43 bar, the photons of a pair are separated by more than 2 octaves. The access to ultraviolet wavelengths opens the possibility for spectroscopy and sensing with undetected photons in this spectral range.

Optimization of Alkali Treatment for Production of Fermentable Sugars and Phenolic Compounds from Potato Peel Waste Using Topographical Characterization and FTIR Spectroscopy.

Potato peel waste (PPW) was utilized as a bio-template for the production of valuable compounds such as reducing sugars (RS), total sugar (TS) and total phenolic compounds (TPC). Two methods of alkali treatments, i.e., chemical (NaOH) and thermochemical (NaOH assisted with autoclaving) processes, were employed for the deconstruction of PPW. Response surface methodology (RSM) was used to study the effects of alkali concentration (0.6-1.0 w/v), substrate concentration (5-15 g) and time (4-8 h) on the extraction of RS, TS and TP from PPW. The application of alkali plus steam treatment in Box-Behnken design (BBD) with three levels yielded the optimum releases of RS, TS and TP as 7.163, 28.971 and 4.064 mg/mL, respectively, corresponding to 10% substrate loading, in 0.6% NaOH for 8 h. However, the alkali treatment reported optimum extractions of RS, TS and TP as 4.061, 17.432 and 2.993 mg/mL, respectively. The thermochemical pretreatment was proven a beneficial process as it led to higher productions of TP. FTIR and SEM were used to analyze the deterioration levels of the substrate. The present work was used to explore the sustainable management of PPW, which is a highly neglected substrate bioresource but is excessively dumped in open environment, raising environmental concerns. The cost-effective methods for the breakdown of PPW starch into fermentable sugars might be utilized to extract valuable compounds.

Towards the Hydrophobization of Thermoplastic Starch Using Fatty Acid Starch Ester as Additive.

To bring surface hydrophobicity to thermoplastic starch (TPS) materials for food packaging, fatty acid starch esters (FASE), specifically starch tri-laurate, were incorporated into TPS formulations. A total of three different ratios of FASE (2%, 5% and 10%) were added to the TPS formulation to evaluate the influence of FASE onto physico-chemical properties of TPS/FASE blends, i.e., surface hydrophobicity, dynamic vapor sorption (DVS), and tensile behaviors. Blending TPS with FASE leads to more hydrophobic materials, whatever the FASE ratio, with initially measured contact angles ranging from 90° for the 2%-FASE blend to 99° for the 10%-blend. FT-IR study of the material surface and inner core shows that FASE is mainly located at the material surface, justifying the increase of material surface hydrophobicity. Despite this surface hydrophobicity, blending TPS with FASE seems not to affect blend vapor sorption behavior. From a mechanical behavior perspective, the variability of tensile properties of starch-based materials with humidity rate is slightly reduced with increasing FASE ratio (a decrease of maximal stress of 10-30% was observed for FASE ratio 2% and 10%), leading to more ductile materials.

Flower-like Highly Open-Structured Binder-Free Zn-Co-Oxide Nanosheet for High-Performance Supercapacitor Electrodes.

Scientific research is being compelled to develop highly efficient and cost-effective energy-storing devices such as supercapacitors (SCs). The practical use of SC devices is hindered by their low energy density and poor rate capability due to the binding agents in fabricating electrodes. Herein, we proposed flower-like highly open-structured binder-free ZnCo2O4 micro-flowers composed of nanosheets supported in nickel foam (ZnCoO@NF) with improved rate capability up to 91.8% when current varied from 2 to 20 A·g-1. The ZnCoO@NF electrode exhibited a superior specific capacitance of 1132 F·g-1 at 2 A·g-1 and revealed 99% cycling stability after 7000 cycles at a high current density of 20 A·g-1. The improved performance of the ZnCoO@NF electrode is attributed to the highly stable structure of the micro/nano-multiscale architecture, which provides both the high conduction of electrons and fast ionic transportation paths simultaneously.

Doppler optical frequency domain reflectometry for remote fiber sensing.

Coherent optical frequency domain reflectometry has been widely used to locate static reflectors with high spatial resolution. Here, we present a new type of Doppler optical frequency domain reflectometry that offers simultaneous measurement of the position and speed of moving objects. The system is exploited to track optically levitated "flying" particles inside a hollow-core photonic crystal fiber. As an example, we demonstrate distributed temperature sensing with sub-mm-scale spatial resolution and a standard deviation of ∼10°C up to 200°C.

Doppler optical frequency domain reflectometry for remote fiber sensing: erratum.

This erratum corrects a typographical error in Eq. (10) of our paper [Opt. Express29, 14615 (2021)10.1364/OE.421842].

Fiber-based biphoton source with ultrabroad frequency tunability.

Tunable biphotons are highly important for a wide range of quantum applications. For some applications, especially interesting are cases where two photons of a pair are far apart in frequency. Here, we report a tunable biphoton source based on a xenon-filled hollow-core photonic crystal fiber. Tunability is achieved by adjusting the pressure of the gas inside the fiber. This allows us to tailor the dispersion landscape of the fiber, overcoming the principal limitations of solid-core fiber-based biphoton sources. We report a maximum tunability of 120 THz for a pressure range of 4 bar with a continuous shift of 30 THz/bar. At 21 bar, the photons of a pair are separated by more than one octave. Despite the large separation, both photons have large bandwidths. At 17 bar, they form a very broad (110 THz) band around the frequency of the pump.

Deep-UV-enhanced supercontinuum generated in a tapered gas-filled photonic crystal fiber.

We present the use of a linearly down-tapered gas-filled hollow-core photonic crystal fiber in a single stage, pumped with pulses from a compact infrared (IR) laser source, to generate a supercontinuum (SC) carrying significant spectral power in the deep ultraviolet (UV) [200-300 nm]. The generated SC extends from the near IR down to ∼213nm with 0.58 mW/nm and down to ∼220nm with 0.83 mW/nm in the deep UV.

Phosphine-Free Ruthenium Complex-Catalyzed Synthesis of Mono- or Dialkylated Acyl Hydrazides via the Borrowing Hydrogen Strategy.

Herein, we report a diaminocyclopentadienone ruthenium tricarbonyl complex-catalyzed synthesis of mono- or dialkylated acyl hydrazide compounds using the borrowing hydrogen strategy in the presence of various substituted primary and secondary alcohols as alkylating reagents. Deuterium labeling experiments confirm that the alcohols were the hydride source in this cascade process. Density functional theory (DFT) calculations unveil the origin and the threshold between the mono- and dialkylation.

Effects of Geomaterial-Originated Fillers on Microstructure and Mechanical/Physical Properties of α- and ß-Chitosan-Based Films.

Edible films and coatings with good mechanical/physical properties are highly required for carrying medical substances and food packaging. So, solvent-cast films of α- or ß-chitosan filled with palygorskite, montmorillonite or geopolymer-containing material (GCM), were prepared, and the effects of their clay contents (up to 50 wt.%) on the mechanical/physical properties were assessed. The microstructure of the films was investigated using FT-IR spectroscopy, SEM and thermal analysis. The results showed that, except for the films composed of GCM and ß-chitosan, the mechanical properties of the films with limited (up to 5 wt.%) to moderate (5-25 wt.%) amounts of fillers increased as a result of the attractive electrostatic forces formed between the fillers and chitosan functional groups (-NH3+, CH2OH and NHCOCH3). However, due to the occurrence of coarse aggregates, the strength of filler-rich films declined. The addition of fillers led to an increase in porosity and water absorption of the films, but it had irregular effects on their wettability and water vapor transmission rate. These observations as well as the thermal stability of the films were discussed in relation to the characterization results.

Ionotropic Gelation of Chitosan Flat Structures and Potential Applications.

The capability of some polymers, such as chitosan, to form low cost gels under mild conditions is of great application interest. Ionotropic gelation of chitosan has been used predominantly for the preparation of gel beads for biomedical application. Only in the last few years has the use of this method been extended to the fabrication of chitosan-based flat structures. Herein, after an initial analysis of the major applications of chitosan flat membranes and films and their usual methods of synthesis, the process of ionotropic gelation of chitosan and some recently proposed novel procedures for the synthesis of flat structures are presented.

All normal dispersion nonlinear fibre supercontinuum source characterization and application in hyperspectral stimulated Raman scattering microscopy.

Hyperspectral stimulated Raman scattering (SRS) microscopy is a powerful label-free, chemical-specific technique for biomedical and mineralogical imaging. Usually, broad and rapid spectral scanning across Raman bands is required for species identification. In many implementations, however, the Raman spectral scan speed is limited by the need to tune source laser wavelengths. Alternatively, a broadband supercontinuum source can be considered. In SRS microscopy, however, source noise is critically important, precluding many spectral broadening schemes. Here we show that a supercontinuum light source based on all normal dispersion (ANDi) fibres provides a stable broadband output with very low incremental source noise. We characterized the noise power spectral density of the ANDi fibre output and demonstrated its use in hyperspectral SRS microscopy applications. This confirms the viability and ease of implementation of ANDi fibre sources for broadband SRS imaging.

ATPase site architecture is required for self-assembly and remodeling activity of a hexameric AAA+ transcriptional activator.

AAA+ proteins (ATPases associated with various cellular activities) are oligomeric ATPases that use ATP hydrolysis to remodel their substrates. By similarity with GTPases, a dynamic organization of the nucleotide-binding pockets between ATPase protomers is proposed to regulate functionality. Using the transcription activator PspF as an AAA+ model, we investigated contributions of conserved residues for roles in ATP hydrolysis and intersubunit communication. We determined the R-finger residue and revealed that it resides in a conserved "R-hand" motif (R(x)D(xxx)R) needed for its "trans-acting" activity. Further, a divergent Walker A glutamic acid residue acts synergistically with a tyrosine residue to function in ADP-dependent subunit-subunit coordination, forming the "ADP-switch" motif. Another glutamic acid controls hexamer formation in the presence of nucleotides. Together, these results lead to a "residue-nucleotide" interaction map upon which to base AAA+ core regulation.

Potato By-Products as a Source of Natural Chlorogenic Acids and Phenolic Compounds: Extraction, Characterization, and Antioxidant Capacity.

Total phenolic compounds (TPC) and the chlorogenic acids content of potato by-product extracts of two hydro alcoholic solvents (methanol, ethanol) and two extraction methods (maceration and heating-assisted extraction) were studied. The content of TPC in the extracts was determined spectrometrically according to the Folin-Ciocalteu procedure and calculated as chlorogenic acid equivalents. Soluble phenolic acids, especially the chlorogenic acids, were performed by HPLC. The antioxidant activity of potato by-product extracts was determined by using the total oxygen radical absorbance capacity (ORAC) method. The highest content of TPC was found in raw and lyophilized red waters when using ethanol as a solvent around 57 mg/g fresh weight. Heating-assisted extraction enhances this quantitative increasing. At the given operating conditions, unpeeled potato samples exhibit a higher TPC than peeled ones, showing that TPC are accumulated in skin tissue. The greatest amount of chlorogenic acid (Caffeoyl-Quinic Acids, 3, 4, 5 CQA), mainly the 5-CQA (870 ± 39.66 µg/g WM for wet matter versus DM dry matter), was obtained in the pellets and lyophilized fresh peels (skin vs. flesh). In addition, the greatest amounts of chlorogenic acids were found when potato peels were extracted with methanol. Heating-assisted extraction improved the chlorogenic acid concentration of the potato peel extracts. The total ORAC amounts recorded in the different potato fractions varied between 1500 and 1650 µM TE/g. They were higher than those of some fruits, vegetables, nuts, cereals, and sweet potato cultivar. The good correlation coefficient found between TPC, chlorogenic acids determination, and the ORAC capacity indicates that the TPC can be used as a good indicator of the antioxidant capacity of potato by-products.

Importance of the C12 Carbon Chain in the Biological Activity of Rhamnolipids Conferring Protection in Wheat against Zymoseptoria tritici.

The hemibiotrophic fungus Zymoseptoria tritici, responsible for Septoria tritici blotch, is currently the most devastating foliar disease on wheat crops worldwide. Here, we explored, for the first time, the ability of rhamnolipids (RLs) to control this pathogen, using a total of 19 RLs, including a natural RL mixture produced by Pseudomonas aeruginosa and 18 bioinspired RLs synthesized using green chemistry, as well as two related compounds (lauric acid and dodecanol). These compounds were assessed for in vitro antifungal effect, in planta defence elicitation (peroxidase and catalase enzyme activities), and protection efficacy on the wheat-Z. tritici pathosystem. Interestingly, a structure-activity relationship analysis revealed that synthetic RLs with a 12 carbon fatty acid tail were the most effective for all examined biological activities. This highlights the importance of the C12 chain in the bioactivity of RLs, likely by acting on the plasma membranes of both wheat and Z. tritici cells. The efficacy of the most active compound Rh-Est-C12 was 20-fold lower in planta than in vitro; an optimization of the formulation is thus required to increase its effectiveness. No Z. tritici strain-dependent activity was scored for Rh-Est-C12 that exhibited similar antifungal activity levels towards strains differing in their resistance patterns to demethylation inhibitor fungicides, including multi-drug resistance strains. This study reports new insights into the use of bio-inspired RLs to control Z. tritici.

Synthetic Mono-Rhamnolipids Display Direct Antifungal Effects and Trigger an Innate Immune Response in Tomato against Botrytis Cinerea.

Natural rhamnolipids are potential biocontrol agents for plant protection against bacterial and fungal diseases. In this work, we synthetized new synthetic mono-rhamnolipids (smRLs) consisting in a rhamnose connected to a simple acyl chain and differing by the nature of the link and the length of the lipid tail. We then investigated the effects of these ether, ester, carbamate or succinate smRL derivatives on Botrytis cinerea development, symptoms spreading on tomato leaves and immune responses in tomato plants. Our results demonstrate that synthetic smRLs are able to trigger early and late immunity-related plant defense responses in tomato and increase plant resistance against B. cinerea in controlled conditions. Structure-function analysis showed that chain length of the lipidic part and type of acyl chain were critical to smRLs immune activity and to the extent of symptoms caused by the fungus on tomato leaves.