3D layered co-culture model enhances Trastuzumab Deruxtecan sensitivity and reveals the combined effect with G007-LK in HER2-positive non-small cell lung cancer.

Human epidermal growth factor receptor 2 (HER2) aberrations are observed in various cancers. In non-small cell lung cancer, genetic alterations activating HER2, mostly exon 20 insertion mutations, occur in approximately 2-4% of cases. Trastuzumab deruxtecan (T-DXd), a HER2-targeted antibody-drug conjugate has been approved as the first HER2-targeted drug for HER2-mutant lung cancer. However, some cases are not responsive to T-DXd and the primary resistant mechanism remains unclear. In this study, we assessed sensitivity to T-DXd in JFCR-007, a patient-derived HER2-mutant lung cancer cell line. Although JFCR-007 was sensitive to HER2 tyrosine kinase inhibitors, it showed resistance to T-DXd in attachment or spheroid conditions. Accordingly, we established a three-dimensional (3D) layered co-culture model of JFCR-007, where it exhibited a lumen-like structure and became sensitive to T-DXd. In addition, an in-house inhibitor library screening revealed that G007-LK, a tankyrase inhibitor, was effective when combined with T-DXd. G007-LK increased the cytotoxicity of topoisomerase-I inhibitor, DXd, a payload of T-DXd and SN-38. This combined effect was also observed in H2170, an HER2-amplified lung cancer cell line. These results suggest that the proposed 3D co-culture system may help in evaluating the efficacy of T-DXd and may recapitulate the tumor microenvironment.

ID3 is a novel target gene of p53 and modulates lung cancer cell metastasis.

The tumor suppressor p53 prevents cancer development by regulating dozens of target genes with diverse biological functions. Although numerous p53 target genes have been identified to date, the dynamics and function of the regulatory network centered on p53 have not yet been fully elucidated. We herein identified inhibitor of DNA-binding/differentiation-3 (ID3) as a direct p53 target gene. p53 bound the distal promoter of ID3 and positively regulated its transcription. ID3 expression was significantly decreased in clinical lung cancer tissues, and was closely associated with overall survival outcomes in these patients. Functionally, ID3 deficiency promoted the metastatic ability of lung cancer cells through its effects on the transcriptional regulation of CDH1. Furthermore, the ectopic expression of ID3 in p53-knockdown cells restored E-cadherin expression. Collectively, the present results demonstrate that ID3 plays a tumor-suppressive role as a downstream effector of p53 and impedes lung cancer cell metastasis by regulating E-cadherin expression.

BET protein-dependent E2F pathway activity confers bell-shaped type resistance to tankyrase inhibitors in APC-mutated colorectal cancer.

WNT/ß-catenin signaling is aberrantly activated in colorectal cancer (CRC) mainly by loss-of-function mutations in adenomatous polyposis coli (APC) and is involved in tumor progression. Tankyrase inhibitors, which suppress WNT/ß-catenin signaling, are currently in pre-clinical and clinical trials. However, the mechanisms of resistance to tankyrase inhibitors remain unclear. In this study, we established tankyrase inhibitor-resistant CRC cells, JC73-RK100, from APC-mutated patient-derived CRC cells. JC73-RK100 cells and several CRC cell lines were sensitive to tankyrase inhibitors at low concentrations but were resistant at high concentrations, showing an intrinsic/acquired bell-shaped dose response. Mechanistically, tankyrase inhibitors at high concentrations promoted BRD3/4-dependent E2F target gene transcription and over-activated cell cycle progression in these cells. BET inhibitors canceled the bell-shaped dose response to tankyrase inhibitors. Combination of tankyrase and BET inhibitors significantly suppressed tumor growth in a mouse xenograft model. These observations suggest that the combination of tankyrase and BET inhibitors may be a useful therapeutic approach to overcome the resistance of a subset of CRCs to tankyrase inhibitors.

Promoting biological similarity by collagen microfibers in 3D colorectal cancer-stromal tissue: Replicating mechanical properties and cancer stem cell markers.

The extracellular matrix (ECM) of cancer tissues is rich in dense collagen, contributing to the stiffening of these tissues. Increased stiffness has been reported to promote cancer cell proliferation, invasion, metastasis, and prevent drug delivery. Replicating the structure and mechanical properties of cancer tissue in vitro is essential for developing cancer treatment drugs that target these properties. In this study, we recreated specific characteristics of cancer tissue, such as collagen density and high elastic modulus, using a colorectal cancer cell line as a model. Using our original material, collagen microfibers (CMFs), and a constructed three-dimensional (3D) cancer-stromal tissue model, we successfully reproduced an ECM highly similar to in vivo conditions. Furthermore, our research demonstrated that cancer stem cell markers expressed in the 3D cancer-stromal tissue model more closely mimic in vivo conditions than traditional two-dimensional cell cultures. We also found that CMFs might affect an impact on how cancer cells express these markers. Our 3D CMF-based model holds promise for enhancing our understanding of colorectal cancer and advancing therapeutic approaches. STATEMENT OF SIGNIFICANCE: Reproducing the collagen content and stiffness of cancer tissue is crucial in comprehending the properties of cancer and advancing anticancer drug development. Nonetheless, the use of collagen as a scaffold material has posed challenges due to its poor solubility, hindering the replication of a cancer microenvironment. In this study, we have successfully recreated cancer tissue-specific characteristics such as collagen density, stiffness, and the expression of cancer stem cell markers in three-dimensional (3D) colorectal cancer stromal tissue, utilizing a proprietary material known as collagen microfiber (CMF). CMF proves to be an ideal scaffold material for replicating cancer stromal tissue, and these 3D tissues constructed with CMFs hold promise in contributing to our understanding of cancer and the development of therapeutic drugs.

A macrocyclic kinase inhibitor overcomes triple resistant mutations in EGFR-positive lung cancer.

Brigatinib-based therapy was effective against osimertinib-resistant EGFR C797S mutants and is undergoing clinical studies. However, tumor relapse suggests additional resistance mutations might emerge. Here, we first demonstrated the binding mode of brigatinib to the EGFR-T790M/C797S mutant by crystal structure analysis and predicted brigatinib-resistant mutations through a cell-based assay including N-ethyl-N-nitrosourea (ENU) mutagenesis. We found that clinically reported L718 and G796 compound mutations appeared, consistent with their proximity to the binding site of brigatinib, and brigatinib-resistant quadruple mutants such as EGFR-activating mutation/T790M/C797S/L718M were resistant to all the clinically available EGFR-TKIs. BI-4020, a fourth-generation EGFR inhibitor with a macrocyclic structure, overcomes the quadruple and major EGFR-activating mutants but not the minor mutants, such as L747P or S768I. Molecular dynamics simulation revealed the binding mode and affinity between BI-4020 and EGFR mutants. This study identified potential therapeutic strategies using the new-generation macrocyclic EGFR inhibitor to overcome the emerging ultimate resistance mutants.

In vitro throughput screening of anticancer drugs using patient-derived cell lines cultured on vascularized three-dimensional stromal tissues.

The development of high-throughput anticancer drug screening methods using patient-derived cancer cell (PDC) lines that maintain their original characteristics in an in vitro three-dimensional (3D) culture system poses a significant challenge to achieving personalized cancer medicine. Because stromal tissue plays a critical role in the composition and maintenance of the cancer microenvironment, in vitro 3D-culture using reconstructed stromal tissues has attracted considerable attention. Here, a simple and unique in vitro 3D-culture method using heparin and collagen together with fibroblasts and endothelial cells to fabricate vascularized 3D-stromal tissues for in vitro culture of PDCs is reported. Whereas co-treatment with bevacizumab, a monoclonal antibody against vascular endothelial growth factor, and 5-fluorouracil significantly reduced the survival rate of 3D-cultured PDCs to 30%, separate addition of each drug did not induce comparable strong cytotoxicity, suggesting the possibility of evaluating the combined effect of anticancer drugs and angiogenesis inhibitors. Surprisingly, drug evaluation using eight PDC lines with the 3D-culture method resulted in a drug efficacy concordance rate of 75% with clinical outcomes. The model is expected to be applicable to in vitro throughput drug screening for the development of personalized cancer medicine. STATEMENT OF SIGNIFICANCE: To replicate the cancer microenvironment, we constructed a cancer-stromal tissue model in which cancer cells are placed above and inside stromal tissue with vascular network structures derived from vascular endothelial cells in fibroblast tissue using CAViTs method. Using this method, we were able to reproduce the invasion and metastasis processes of cancer cells observed in vivo. Using patient-derived cancer cells, we assessed the possibility of evaluating the combined effect with an angiogenesis inhibitor. Further, primary cancer cells also grew on the stromal tissues with the normal medium. These data suggest that the model may be useful for new in vitro drug screening and personalized cancer medicine.

descSPIM: an affordable and easy-to-build light-sheet microscope optimized for tissue clearing techniques.

Despite widespread adoption of tissue clearing techniques in recent years, poor access to suitable light-sheet fluorescence microscopes remains a major obstacle for biomedical end-users. Here, we present descSPIM (desktop-equipped SPIM for cleared specimens), a low-cost ($20,000-50,000), low-expertise (one-day installation by a non-expert), yet practical do-it-yourself light-sheet microscope as a solution for this bottleneck. Even the most fundamental configuration of descSPIM enables multi-color imaging of whole mouse brains and a cancer cell line-derived xenograft tumor mass for the visualization of neurocircuitry, assessment of drug distribution, and pathological examination by false-colored hematoxylin and eosin staining in a three-dimensional manner. Academically open-sourced ( https://github.com/dbsb-juntendo/descSPIM ), descSPIM allows routine three-dimensional imaging of cleared samples in minutes. Thus, the dissemination of descSPIM will accelerate biomedical discoveries driven by tissue clearing technologies.