RESUMO
Materials with multiple principal elements (middle- and high-entropy materials), are used in emerging applications in various fields due to their unique properties, driven by configuration entropy. Improved understanding and experimental investigations of the impact of the entropy of mixing on the properties of these materials are of large practical interest. Here we show a simplified limited area calculation approach for assessing the entropy of mixing using a CoCuFeNi model nanoalloy. Based on our calculations we propose a new parametric entropy-based criterion, which defines critical scale parameter transition from the maximal entropy state to the entropy-depleted state of the system. The criterion could be used for generalized mechanistic assessment of the effect of the entropy of mixing on the characteristics of the materials with multiple principal elements and for the development and characterization of existing and new middle- and high-entropy materials with both simple single-, and more complex, multiple-sublattice structures.
RESUMO
Graphene (G) and metal-decorated G nanocomposites are among the most promising materials for a wide variety of practical applications, and, therefore, the development of fast and reliable methods for nanocomposite synthesis is an important task. Herein we report the new fast approach for solution combustion synthesis (SCS) of large-area G-metallic nanocomposites in an air atmosphere. The G-based nanocomposites were obtained by a SCS using copper and nickel nitrates, as well as their stoichiometric mixture as the metal source and citric acid as a fuel and carbon source. The G structures started on the catalytic surface of freshly synthesized metallic nanograins during the combustion process and formed large-area free-standing films due to the high-energy and fast synthesis process. We proposed a mechanism of formation of the G-based nanocomposites. The phase compositions, structural features, and magnetization behavior of G@Cu, G@Ni, and G@CuNi nanocomposites are carefully studied and described. G@metal nanocomposites were studied as a material for the creation of a highly effective sensing element of semiconductor gas sensors.
RESUMO
In this paper, we report a new modified solution combustion synthesis technique for one-step production of metallic Co nanoparticles. The main unique feature of our approach is the use of microwave-assisted foam preparation. Also, the effect of different types of fuels (urea, citric acid, glycine, and hexamethylenetetramine) on the combustion process and characteristics of resultant solid products were investigated. It was shown that the combination of microwave-assisted foam and hexamethylenetetramine as a fuel allows us to produce metallic Co nanoparticles with the broad size distribution (â¼5-40 nm), high coercivity (370 Oe), and high value of saturation magnetization (137 emu/g) by the one-step solution combustion synthesis under normal air atmosphere without any post reduction.
RESUMO
The use of metal and metal oxide nanomaterials (NMs) is experiencing a significant surge in popularity due to their distinctive structures and properties, making them highly attractive for a wide range of applications. This increases the risks of their potential negative impact on organisms if dispersed into the environment. Information about their behavior and transformation upon environmental interactions in aquatic settings is limited. In this study, the influence of naturally excreted biomolecules from the zooplankton Daphnia magna on nanosized Y2O3 of different concentrations was systematically examined in synthetic freshwater in terms of adsorption and eco-corona formation, colloidal stability, transformation, dissolution, and ecotoxicity towards D. magna. The formation of an eco-corona on the surface of the Y2O3 NMs leads to improved colloidal stability and a reduced extent of dissolution. Exposure to the Y2O3 NMs lowered the survival probability of D. magna considerably. The ecotoxic potency was slightly reduced by the formation of the eco-corona, though shown to be particle concentration-specific. Overall, the results highlight the importance of systematic mechanistic and fundamental studies of factors that can affect the environmental fate and ecotoxic potency of NMs.
Assuntos
Daphnia , Nanoestruturas , Animais , Nanoestruturas/toxicidade , Água Doce , Daphnia magnaRESUMO
Aluminum matrix composites (AMCs), incorporating Zirconium Nitride (ZrN) as reinforcing additives, demonstrate immense promise for applications in aerospace, automotive, and power generation due to their unique combination of low density, superior mechanical properties, and excellent thermal/electrical conductivity. This study explores the influence of ZrN reinforcement on the microstructure and mechanical properties of AlSi10Mg metal-matrix composites. Utilizing high-energy ball milling (HEBM) and spark-plasma sintering (SPS), ZrN/AlSi10Mg composites were synthesized, achieving nearly full density with uniform ZrN distribution, while phase and chemical transformations were not observed in the bulk composites. The addition of ZrN resulted in a notable increase in hardness of 237% (182 ± 8 HV2), elastic modulus of 56% (114 ± 3 GPa), compressive and tensile strength of 183% (565 ± 15 GPa), and 125% (387 ± 9 GPa), respectively, for composites containing 30% ZrN, compared to the non-reinforced alloy. Experimentally determined coefficients of thermal expansion (CTEs) for composites with 10%, 20%, and 30% ZrN content were 19.8 × 10-6 °C-1, 19.1 × 10-6 °C-1, and 18 × 10-6 °C-1, respectively, which well relates to Schapery's model. These findings contribute to understanding the synthesis, mechanical behavior, and thermal properties of ZrN/AlSi10Mg composites, demonstrating their potential for diverse engineering applications.
RESUMO
The control of atmosphere content and concentration of specific gases are important tasks in many industrial processes, agriculture, environmental and medical applications. Thus there is a high demand to develop new advanced materials with enhanced gas sensing characteristics including high gas selectivity. Herein we report the result of a study on the synthesis, characterization, and investigation of gas sensing properties of In2O3-graphene-Cu composite nanomaterials for sensing elements of single-electrode semiconductor gas sensors. The nanocomposite has a closely interconnected and highly defective structure, which is characterized by high sensitivity to various oxidizing and reducing gases and selectivity to NO2. The In2O3-based materials were obtained by sol-gel method, by adding 0-6 wt% of pre-synthesized graphene-Cu powder into In-containing gel before xerogel formation. The graphene-Cu flakes played the role of centers for In2O3 nucleation and then crystal growth terminators. This led to the formation of structural defects, influencing the surface energy state and concentration of free electrons. The concentration of defects increases with the increase of graphene-Cu content from 1 to 4 wt%, which also affects the gas-sensing properties of the nanocomposites. The sensors show a high sensing response to both oxidizing (NO2) and reducing (acetone, ethanol, methane) gases at an optimal working heating current of 91-161 mA (280-510 °C). The sensor with nanocomposite with 4 wt% of graphene-Cu additive showed the highest sensitivity to NO2 (46 ppm) in comparison with other tested gases with an absolute value of sensing response of (- ) 225 mV at a heating current of 131 mA (430 °C) and linear dependence of sensing response to NO2 concentration.
RESUMO
Expanding applications and production of engineered nanoparticles lead to an increased risk for their environmental dispersion. Systematic knowledge of surface transformation and dissolution of nanoparticles is essential for risk assessment and regulation establishment. Such aspects of Co- and Ni-based nanoparticles including metals, oxides, and solution combustion synthesized metal nanoparticles (metal cores with carbon shells) were investigated upon environmental interaction with organic matter, simulated by natural organic matter (NOM) and degradation products from zooplankton and algae (eco-corona biomolecules, EC) in freshwater (FW). The presence of NOM and EC in FW results in negative surface charges of the nanoparticles reduces the extent of nanoparticles agglomeration, and increases concentration, mainly due to the surface adsorption of carboxylate groups of the organic matter. The dissolution of the Co-based nanoparticles was for all conditions (FW, FW with NOM or EC) higher than the Ni-based, except for Co3O4 being nearly non-soluble. The surface transformation and dissolution of nanoparticles are highly exposure and time-dependent, and surface- and environment specific. Therefore, no general correlation was observed between dissolution and, particle types, surface conditions, or EC/NOM adsorption. This underlines the importance of thorough investigations of nanoparticles adsorption/desorption, degradation, and exposure scenarios for developing regulatory relevant protocols and guidelines.
Assuntos
Nanopartículas Metálicas , Nanopartículas , Níquel , Cobalto , Solubilidade , Organismos Aquáticos , Água DoceRESUMO
Increased use and production of engineered nanoparticles (NPs) lead to an elevated risk of their diffuse dispersion into the aquatic environment and increased concern on unknown effects induced by their release into the aquatic ecosystem. An improved understanding of the environmental transformation processes of NPs of various surface characteristics is hence imperative for risk assessment and management. This study presents results on effects of natural organic matter (NOM) on the environmental transformation and dissolution of metal and metal oxide NPs of different surface and solubility properties in synthetic freshwater (FW) with and without NOM. Adsorption of NOM was evident on most of the studied NPs, except Sb and Sb2O3, which resulted in the formation of negatively charged colloids of higher stability and smaller size distribution compared with the same NPs in FW only. The dissolution rate of the NPs in the presence of NOM correlated with the strength of interactions between the carboxylate group of NOM and the particle surface, and resulted in either no (Mn, Sb, ZnO NPs), increased (Co, Sn NPs) and decreased (Ni, NiO, Sb2O3, Y2O3 NPs) levels of dissolution. One type of metal NP from each group (Mn, Ni, Sn) were investigated to assess whether observed differences in adsorption of NOM and dissolution would influence their ecotoxic potency. The results showed Mn, Ni, and Sn NPs to generate intracellular reactive oxygen species (ROS) in a time and dose-dependent manner. The extent of ROS generation in FW was similar for both Mn and Ni NPs but higher for Sn NPs. These findings are possibly related to interactions and infiltration of the NPs with the cells, which lead to redox imbalances which could induce oxidative stress and cell damage. At the same time, the presence of NOM generally reduced the intracellular ROS generation by 20-40% for the investigated NPs and also reduced cytotoxicity of Sn NPs, which can be attributed to the stronger interaction of carboxylate groups of NOM with the surface of the NPs.
Assuntos
Nanopartículas Metálicas , Óxido de Zinco , Ecossistema , Nanopartículas Metálicas/toxicidade , Metais , Óxidos/toxicidade , Espécies Reativas de Oxigênio , Óxido de Zinco/toxicidadeRESUMO
Pure metallic Co, Ni, and their bimetallic compositions of Co3Ni, CoNi, and CoNi3 nanomaterials were prepared by solution combustion synthesis. Microstructure, phase composition, and crystalline structure of these nanoparticles (NPs) were characterized along with studies of their corrosion and dissolution properties in synthetic freshwater with and without natural organic matter (NOM). The nanomaterials consisted of aggregates of fine NPs (3-30 nm) of almost pure metallic and bimetallic crystal phases with a thin surface oxide covered by a thin carbon shell. The nanomaterials were characterized by BET surface areas ranging from ~ 1 to 8 m2/g for the Ni and Co NPs, to 22.93 m2/g, 14.86 m2/g, and 10.53 m2/g for the Co3Ni, CoNi, CoNi3 NPs, respectively. More Co and Ni were released from the bimetallic NPs compared with the pure metals although their corrosion current densities were lower. In contrast to findings for the pure metal NPs, the presence of NOM increased the release of Co and Ni from the bimetallic NPs in freshwater compared to freshwater only even though its presence reduced the corrosion rate (current density). It was shown that the properties of the bimetallic nanomaterials were influenced by multiple factors such as their composition, including carbon shell, type of surface oxides, and the entropy of mixing.
RESUMO
In this work, the multiferroic bismuth ferrite materials Bi0.9RE0.1FeO3 doped by rare-earth (RE = La, Eu, and Er) elements were obtained by the solution combustion synthesis. Structure, electrical, and magnetic properties of prepared samples were investigated by X-ray photoelectron spectroscopy, Mössbauer spectroscopy, electrical hysteresis measurement, broadband dielectric spectroscopy, and SQUID magnetometry. All obtained nanomaterials are characterized by spontaneous electrical polarization, which confirmed their ferroelectric properties. Investigation of magnetic properties at 300.0 K and 2.0 K showed that all investigated Bi0.9RE0.1FeO3 ferrites possess significantly higher magnetization in comparison to bismuth ferrites obtained by different methods. The highest saturation magnetisation of 5.161 emu/g at 300.0 K was observed for the BLaFO sample, while at 2.0 K it was 12.07 emu/g for the BErFO sample. Several possible reasons for these phenomena were proposed and discussed.
RESUMO
Graphene and its analogs in combination with metal nanopowders are among the most promising catalysts for various industry valuable processes. The newly obtained solution combustion synthesized graphene-Cu and graphene-CuNi nanocomposites were examined in heterogeneous catalysis of thermal activated CO oxidation and photoactivated degradation of acid telon blue and direct blue dyes. The nanocomposites are characterized by a closely connected solution combustion synthesized graphene-metal structure with a number of graphene layers from 1 to 3 and fine metal grains sizes of 31 nm (Cu) and 14 nm (CuNi). The experimental data showed the obtained graphene-metal nanocomposites are among the most effective catalysts for CO oxidation with a temperature of 100% conversion of 150 °C and 200 °C for Cu and CuNi containing catalysts, respectively. At the same time, both nanopowders were found inactive for dyes degradation.
RESUMO
Simultaneously hard and tough nitride ceramics open new venues for a variety of advanced applications. To produce such materials, attention is focused on the development of high-entropy ceramics, containing four or more metallic components distributed homogeneously in the metallic sublattice. While the fabrication of bulk high-entropy carbides and borides is well established, high-entropy nitrides have only been produced as thin films. Herein, we report on a newel three-step process to fabricate bulk high-entropy nitrides. The high-entropy nitride phase was obtained by exothermic combustion of mechanically-activated nanostructured metallic precursors in nitrogen and consolidated by spark plasma sintering. The fabricated bulk high-entropy nitride (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)N demonstrates outstanding hardness (up to 33 GPa) and fracture toughness (up to 5.2 MPaâm1/2), significantly surpassing expected values from mixture rules, as well as all other reported binary and high-entropy ceramics and can be used for super-hard coatings, structural materials, optics, and others. The obtained results illustrate the scalable method to produce bulk high-entropy nitrides with the new benchmark properties.