Zn-based batteries for sustainable energy storage: strategies and mechanisms.

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

Recent advances in rational design for high-performance potassium-ion batteries.

The growing global energy demand necessitates the development of renewable energy solutions to mitigate greenhouse gas emissions and air pollution. To efficiently utilize renewable yet intermittent energy sources such as solar and wind power, there is a critical need for large-scale energy storage systems (EES) with high electrochemical performance. While lithium-ion batteries (LIBs) have been successfully used for EES, the surging demand and price, coupled with limited supply of crucial metals like lithium and cobalt, raised concerns about future sustainability. In this context, potassium-ion batteries (PIBs) have emerged as promising alternatives to commercial LIBs. Leveraging the low cost of potassium resources, abundant natural reserves, and the similar chemical properties of lithium and potassium, PIBs exhibit excellent potassium ion transport kinetics in electrolytes. This review starts from the fundamental principles and structural regulation of PIBs, offering a comprehensive overview of their current research status. It covers cathode materials, anode materials, electrolytes, binders, and separators, combining insights from full battery performance, degradation mechanisms, in situ/ex situ characterization, and theoretical calculations. We anticipate that this review will inspire greater interest in the development of high-efficiency PIBs and pave the way for their future commercial applications.

Strategies Toward High Selectivity, Activity, and Stability of Single-Atom Catalysts.

Single-atom catalysts (SACs) hold immense promise in facilitating the rational use of metal resources and achieving atomic economy due to their exceptional atom-utilization efficiency and distinct characteristics. Despite the growing interest in SACs, only limited reviews have holistically summarized their advancements centering on performance metrics. In this review, first, a thorough overview on the research progress in SACs is presented from a performance perspective and the strategies, advancements, and intriguing approaches employed to enhance the critical attributes in SACs are discussed. Subsequently, a comprehensive summary and critical analysis of the electrochemical applications of SACs are provided, with a particular focus on their efficacy in the oxygen reduction reaction , oxygen evolution reaction, hydrogen evolution reaction , CO2 reduction reaction, and N2 reduction reaction . Finally, the outline future research directions on SACs by concentrating on performance-driven investigation, where potential areas for improvement are identified and promising avenues for further study are highlighted, addressing challenges to unlock the full potential of SACs as high-performance catalysts.

Public Support for Tobacco Endgame Policies: A Systematic Review and Meta-analysis.

INTRODUCTIONS: An increasing number of countries are adopting the tobacco endgame goal. High levels of public support can accelerate momentum towards implementing tobacco endgame policies. We aimed to conduct a systematic review of public support for tobacco endgame policies and to examine the geographical distribution of studies, support among key populations (adolescents and young adults, people who smoke), and the association between survey design and support. METHODS: We searched Embase, PubMed, Scopus, Web of Science, and Google Scholar for studies published from 2013 onwards. Google was used to search the grey literature. The reference lists of included articles were hand-searched. Studies were included if they reported the proportions of people supporting one or more endgame policies. Risk of bias was assessed using the JBI checklist for prevalence studies. RESULTS: Forty-seven articles were included. Aotearoa/New Zealand and the United States were the countries with the most studies (n=11, respectively). Three-level meta-analyses showed the highest support for mandating a very low nicotine content in tobacco products (76%, 95% CI 61-87%). Meta-regressions were performed to assess the associations of population subgroup and survey design with support levels. The level of support was lower among people who smoke compared to the general population (ß range: -1.59 to -0.51). Support for some policies was lower when neutral or don't know response options were included. CONCLUSIONS: Public support for most tobacco endgame policies was high. IMPLICATIONS: Assessing public support can assist with progressing tobacco endgame policies. Policies that are widely supported by the public may be more politically feasible to implement. Qualitative studies and trial studies can further inform communication and implementation strategies for tobacco endgame policies.

Integrated CO2 capture and electrochemical upgradation: the underpinning mechanism and techno-chemical analysis.

Coupling post-combustion CO2 capture with electrochemical utilization (CCU) is a quantum leap in renewable energy science since it eliminates the cost and energy involved in the transport and storage of CO2. However, the major challenges involved in industrial scale implementation are selecting an appropriate solvent/electrolyte for CO2 capture, modeling an appropriate infrastructure by coupling an electrolyser with a CO2 point source and a separator to isolate CO2 reduction reaction (CO2RR) products, and finally selection of an appropriate electrocatalyst. In this review, we highlight the major difficulties with detailed mechanistic interpretation in each step, to find out the underpinning mechanism involved in the integration of electrochemical CCU to achieve higher-value products. In the past decades, most of the studies dealt with individual parts of the integration process, i.e., either selecting a solvent for CO2 capture, designing an electrocatalyst, or choosing an ideal electrolyte. In this context, it is important to note that solvents such as monoethanolamine, bicarbonate, and ionic liquids are often used as electrolytes in CO2 capture media. Therefore, it is essential to fabricate a cost-effective electrolyser that should function as a reversible binder with CO2 and an electron pool capable of recovering the solvent to electrolyte reversibly. For example, reversible ionic liquids, which are non-ionic in their normal forms, but produce ionic forms after CO2 capture, can be further reverted back to their original non-ionic forms after CO2 release with almost 100% efficiency through the chemical or thermal modulations. This review also sheds light on a focused techno-economic evolution for converting the electrochemically integrated CCU process from a pilot-scale project to industrial-scale implementation. In brief, this review article will summarize a state-of-the-art argumentation of challenges and outcomes over the different segments involved in electrochemically integrated CCU to stimulate urgent progress in the field.

Locally Ordered Single-Atom Catalysts for Electrocatalysis.

Single-atom catalysts manifest nearly 100 % atom utilization efficiency, well-defined active sites, and high selectivity. However, their practical applications are hindered by a low atom loading density, uncontrollable location, and ambiguous interaction with the support, thereby posing challenges to maximizing their electrocatalytic performance. To address these limitations, the ability to arrange randomly dispersed single atoms into locally ordered single-atom catalysts (LO-SACs) substantially influences the electronic effect between reactive sites and the support, the synergistic interaction among neighboring single atoms, the bonding energy of intermediates with reactive sites and the complexity of the mechanism. As such, it dramatically promotes reaction kinetics, reduces the energy barrier of the reaction, improves the performance of the catalyst and simplifies the reaction mechanism. In this review, firstly, we introduce a variety of compelling characteristics of LO-SACs as electrocatalysts. Subsequently, the synthetic strategies, characterization methods and applications of LO-SACs in electrocatalysis are discussed. Finally, the future opportunities and challenges are elaborated to encourage further exploration in this rapidly evolving field.

Recent Advances in Environmentally Friendly Dual-crosslinking Polymer Networks.

Environmentally friendly crosslinked polymer networks feature degradable covalent or non-covalent bonds, with many of them manifesting dynamic characteristics. These attributes enable convenient degradation, facile reprocessibility, and self-healing capabilities. However, the inherent instability of these crosslinking bonds often compromises the mechanical properties of polymer networks, limiting their practical applications. In this context, environmentally friendly dual-crosslinking polymer networks (denoted EF-DCPNs) have emerged as promising alternatives to address this challenge. These materials effectively balance the need for high mechanical properties with the ability to degrade, recycle, and/or self-heal. Despite their promising potential, investigations into EF-DCPNs remain in their nascent stages, and several gaps and limitations persist. This Review provides a comprehensive overview of the synthesis, properties, and applications of recent progress in EF-DCPNs. Firstly, synthetic routes to a rich variety of EF-DCPNs possessing two distinct types of dynamic bonds (i.e., imine, disulfide, ester, hydrogen bond, coordination bond, and other bonds) are introduced. Subsequently, complex structure- and dynamic nature-dependent mechanical, thermal, and electrical properties of EF-DCPNs are discussed, followed by their exemplary applications in electronics and biotechnology. Finally, future research directions in this rapidly evolving field are outlined.

AXL receptor tyrosine kinase inhibition improves the anti-tumor effects of CD8+ T cells by inducing CD103+ dendritic cell-mediated T cell priming.

AXL is a member of TAM receptor family and has been highlighted as a potential target for cancer treatment. Accumulating evidence has uncovered the critical role of the AXL signaling pathway in tumor growth, metastasis, and resistance against anti-cancer drugs, as well as its association with cancer immune escape. However, the function of AXL as a manipulator of the immune system in the tumor microenvironment (TME) remains unclear. Therefore, in this study, we investigated the impact of AXL on immune cells in the TME of a syngeneic tumor model using AXL knockout (AXL-/-) mice. Compared to AXL wild-type (AXL+/+) mice, tumor growth was significantly suppressed in AXL-/- mice, and an induced population of tumor-infiltrated CD8+ T cells and CD103+ dendritic cells (DCs) was observed. The change of CD8+ T cells and CD103+ DCs was also confirmed in tumor-draining lymph nodes (TdLN). In addition, the clonal expansion of OVA-specific CD8+ T cells was dominant in AXL-/- mice. Finally, anti-PD-1 treatment evidenced synergistic anti-cancer effects in AXL-/- mice. Overall, our data indicate that AXL signaling may inhibit the clonal expansion of tumor-specific CD8+ T cells through the regulation of the migration of CD8+ T cells and DCs in TME. Thus, AXL may be a powerful molecular target to improve anti-cancer effects through single or combined therapy with immune checkpoint inhibitors (ICI).

Generation of genetically engineered mice for lung cancer with mutant EGFR.

Although epidermal growth factor receptor (EGFR)-tyrosine kinase inhibitors (TKIs) have shown dramatic response and improvement in treating lung cancer with mutant EGFR, the emergence of drug resistance remains a major problem. In particular, some mutations including T790 M and C797S have been recognized as mechanisms of acquired resistance because they weaken binding affinity to drugs. To date, many attempts have been made to develop a new drug for overcoming acquired resistance to EGFR-TKIs, including secondary mutations. However, an appropriate animal model to evaluate in vivo efficacy during novel drug development remains lacking. In this study, we generated a novel transgenic mouse model that conditionally expresses human EGFRL858R/T790M/C797S and firefly luciferase using Cas9-mediated homology-independent targeted integration. Using a lung-specific Sftpc-CreERT2 mouse line, we induced expression of both the human EGFRL858R/T790M/C797S transgene and firefly luciferase in the lungs of adult mice. The expression of these genes and lung cancer occurrence was monitored using an in vivo imaging system and magnetic resonance imaging, respectively. Overall, our mouse model can be utilized to develop new drugs for overcoming C797S-mediated resistance to osimertinib; further, such knock-in systems for expressing oncogenes may be applied to study tumorigenesis and the development of other targeted agents.

Environment-Stratified Age-Period-Cohort Effects on the Prevalence of Walking Among Older Adults.

Walking promotes active aging; however, walking prevalence changes among older adults by age and environmental conditions remain unclear. Age-period-cohort (APC) differences in walking trends among Korean older adults were examined. Data included adults aged ≥ 65 years (n = 592,235) from the nationally representative Korean Community Health Survey. Regional units examined were metropolitan cities, small- and medium-sized cities, and rural areas. Environment-stratified APC modeling was applied for walking prevalence (walking days/time during the past week). From 2008 to 2017, the walking prevalence gap between regional units widened. Decreasing trends were most apparent in rural areas, including by birth year. In all areas, walking decreased with increased age. No distinct period effects were found. Each effect's magnitude was larger in rural areas than cities. Differential APC effects by environmental conditions likely influence walking prevalence changes among older adults. Walking promotion for older adults should consider APC effects and environmental conditions.

Hemp-Derived Nanovesicles Protect Leaky Gut and Liver Injury in Dextran Sodium Sulfate-Induced Colitis.

Hemp (Cannabis sativa L.) is used for medicinal purposes owing to its anti-inflammatory and antioxidant activities. We evaluated the protective effect of nanovesicles isolated from hemp plant parts (root, seed, hemp sprout, and leaf) in dextran sulfate sodium (DSS)-induced colitis in mice. The particle sizes of root-derived nanovesicles (RNVs), seed-derived nanovesicles (SNVs), hemp sprout-derived nanovesicles (HSNVs), and leaf-derived nanovesicles (LNVs) were within the range of 100-200 nm as measured by nanoparticle tracking analysis. Acute colitis was induced in C57BL/N mice by 5% DSS in water provided for 7 days. RNVs were administered orally once a day, leading to the recovery of both the small intestine and colon lengths. RNVs, SNVs, and HSNVs restored the tight (ZO-1, claudin-4, occludin) and adherent junctions (E-cadherin and α-tubulin) in DSS-induced small intestine and colon injury. Additionally, RNVs markedly reduced NF-κB activation and oxidative stress proteins in DSS-induced small intestine and colon injury. Tight junction protein expression and epithelial cell permeability were elevated in RNV-, SNV-, and HSNV-treated T84 colon cells exposed to 2% DSS. Interestedly, RNVs, SNVs, HSNVs, and LNVs reduced ALT activity and liver regeneration marker proteins in DSS-induced liver injury. These results showed for the first time that hemp-derived nanovesicles (HNVs) exhibited a protective effect on DSS-induced gut leaky and liver injury through the gut-liver axis by inhibiting oxidative stress marker proteins.

High thoracic ossification of ligamentum flavum causing partial Horner syndrome.

We report a case of high thoracic ossification of the ligamentum flavum (OLF) causing a partial Horner's syndrome. A 57-year-old man developed a walking disorder, as well as right-sided miosis and anhidrosis. Magnetic resonance imaging demonstrated a spinal cord compressing T2-T3 OLF. The patient improved after surgery.

Pore-Size-Tuned Graphene Oxide Membrane as a Selective Molecular Sieving Layer: Toward Ultraselective Chemiresistors.

Conventional graphene oxide (GO)-based gas membranes, having a narrow pore-size range of less than 0.3 nm, exhibit limited gas molecular permeability because of the kinetic diameters of most volatile organic and sulfur compound (VOCs/VSCs) molecules being larger than 0.3 nm. Here, we employ GO nanosheets (NSs) with a tunable pore-size distribution as a molecular sieving layer on two-dimensional (2D) metal oxide NSs-based gas sensors, i.e., PdO-sensitized WO3 NSs to boost selectivity toward specific gas species. The pore size, surface area, and pore density of GO NSs were simply manipulated by controlling H2O2 concentration. In addition, the pore size-tuned GO NSs were coated on cellulose filtering paper as a free-standing nanoporous membrane. Holey GO membrane showed a highly selective H2S permeability characteristic, exhibiting superior cross-selectivity to CH3COCH3 (0.46 nm), C2H5OH (0.45 nm), and C7H8 (0.59 nm) with larger kinetic diameters compared with H2S (0.36 nm). Such pore-size-tuned GO nanoporous layer is scalable and robust, highlighting a great promise for designing low cost and highly efficient gas-permeable membrane for outstanding selective gas sensing platform.

Epstein-Barr virus-encoded miR-BART5-5p upregulates PD-L1 through PIAS3/pSTAT3 modulation, worsening clinical outcomes of PD-L1-positive gastric carcinomas.

BACKGROUND: Epstein-Barr virus (EBV) is etiologically associated with ~ 10% of all gastric carcinomas. However, the molecular mechanisms and roles of EBV miRNAs in gastric carcinoma oncogenesis are yet to be elucidated. METHODS: MicroRNA microarray and TaqMan quantitative real-time RT-PCR were conducted. RT-PCR and luciferase reporter assay for PIAS3, western blotting for 20 proteins, immunofluorescence for STAT3, transfection with miRBART5-5p-plasmid, STAT3-plasmid, miRBART5-5p mimic, or PIAS3-siRNA, and in vitro assays for biological effects of PD-L1 were implemented. In situ hybridization for EBV-encoded small RNAs and immunohistochemistry were performed on gastric carcinoma tissues. RESULTS: Transfecting miR-BART5-5p into EBV(-) gastric carcinoma cell lines caused a decrease in PIAS3 3'-UTR reporter activity, PIAS3 downregulation, and subsequent STAT3 activation followed by PIAS3/pSTAT3-dependent PD-L1 upregulation. Interestingly, due to PD-L1 knockdown, apoptosis was increased, while the rate of cell proliferation, invasion capacity, and migration were decreased in miR-BART5-5p-transfected cells. In EBV(+) gastric carcinoma cells, anti-miR-BART5-5p reduced PD-L1 levels through PIAS3/pSTAT3 control. Among 103 patients with EBV-associated gastric carcinomas, overall survival was significantly shortened for those with PD-L1(+) tumors compared to those with PD-L1(-) tumors (P = 0.049). CONCLUSIONS: Our findings imply that miR-BART5-5p directly targets PIAS3 and augments PD-L1 through miR-BART5/PIAS3/pSTAT3/PD-L1 axis control. This contributes to antiapoptosis, tumor cell proliferation, invasion and migration, as well as immune escape, furthering gastric carcinoma progression and worsening the clinical outcome, especially in the PD-L1(+) group of patients with EBV-associated gastric carcinomas. miR-BART5-5p may, therefore, be amenable to PD-1/PD-L1 immune checkpoint inhibitor therapy.

From CO2 methanation to ambitious long-chain hydrocarbons: alternative fuels paving the path to sustainability.

The clean and sustainable CO2 reutilization toward products of higher value is of great interest in a background of established environmental concerns and reducing the use of fossil fuels. As promising alternative fuels, hydrocarbons are more valuable than CO, alcohols or formate and can be directly used in existing infrastructures with high energy densities. The prominent development of catalysts capable of selectively converting CO2 into hydrocarbons, from methane to short olefins and long carbon-chains, has been reflected in an expanding volume of exploratory works, which suitably demand interpretive and continuous revision. In the past decades, conventional studies on the thermochemical conversion of CO2 have consistently unlocked meaningful pathways toward the synthesis of hydrocarbons covering a fairly wide range of molecular weights. Conversely, both electrochemically and photochemically driven reactions have only now started to unveil encouraging results, with an extensive number of critical citations outlining the continuous emergence of very recently published reports. In a field in need of urgent development, the authors provide, in a clear form, a detailed retrospective on benchmark catalysts, pioneering approaches and competitive developments in this subject, mechanistic difficulties, emerging stability issues, and reactor design, while highlighting the latest noteworthy reports. Most importantly, this review highlights the advances toward an increase in the hydrocarbon chain-length in the synthesis of highly competitive alternative fuels. Comparisons of valuable thermochemical, electrochemical and photochemically driven strategies in the conversion of CO2 to hydrocarbons are expected to serve as guidelines to disclose promising pathways in a field where mechanistic uncertainties remain a bottleneck for determining the product selectivity. The authors summarize leading and inquisitive perspectives with a focus on the viability and practicability of each approach at a larger scale, while tentatively paving the way to stimulate progress in this field.

E3 Ubiquitin Ligase APC/CCdh1 Negatively Regulates FAH Protein Stability by Promoting Its Polyubiquitination.

Fumarylacetoacetate hydrolase (FAH) is the last enzyme in the degradation pathway of the amino acids tyrosine and phenylalanine in mammals that catalyzes the hydrolysis of 4-fumarylacetoacetate into acetoacetate and fumarate. Mutations of the FAH gene are associated with hereditary tyrosinemia type I (HT1), resulting in reduced protein stability, misfolding, accelerated degradation and deficiency in functional proteins. Identifying E3 ligases, which are necessary for FAH protein stability and degradation, is essential. In this study, we demonstrated that the FAH protein level is elevated in liver cancer tissues compared to that in normal tissues. Further, we showed that the FAH protein undergoes 26S proteasomal degradation and its protein turnover is regulated by the anaphase-promoting complex/cyclosome-Cdh1 (APC/C)Cdh1 E3 ubiquitin ligase complex. APC/CCdh1 acts as a negative stabilizer of FAH protein by promoting FAH polyubiquitination and decreases the half-life of FAH protein. Thus, we envision that Cdh1 might be a key factor in the maintenance of FAH protein level to regulate FAH-mediated physiological functions.

Factors Associated With Types of Sexual Assault Victimization and Bystander Behavior Among South Korean University Students.

The aim of the current study was to gain understanding about incidences of sexual misconduct and bystander behaviors in South Korean universities. Specifically, risk factors were examined associated with three different types of sexual assault victimization (verbal or visual sexual harassment, physically forced sexual assault, and incapacitated sexual assault) and investigated the factors related to bystander behaviors. Data were collected via an online survey tool called SurveyMonkey in 2016. The total sample of participants comprised 1,944 enrolled undergraduate and graduate students from six universities in Seoul, South Korea. One logistic regression was conducted with a sample who reported sexual assault victimization (n = 1,079) to examine the risk factors associated with the three types of sexual misconduct. The other logistic regression was conducted with the subsample of bystanders (n = 540) to examine the relationships between bystander behavior and risk factors. In the main results, each type of sexual misconduct was associated differentially with age, alcohol blackouts, depression, child abuse and neglect, being an international student, and childhood sexual victimization. Also, persons who were older, self-identified LGBT, and victimized by verbal or visual sexual harassment at university were more likely to intervene when sexual misconduct occurred. These findings have implications for policies and interventions to reduce and prevent sexual misconduct in Korean universities.

Sub-Parts-per-Million Hydrogen Sulfide Colorimetric Sensor: Lead Acetate Anchored Nanofibers toward Halitosis Diagnosis.

Lead(II) acetate [Pb(Ac)2] reacts with hydrogen sulfide to form colored brownish precipitates of lead sulfide. Thus far, in order to detect leakage of H2S gas in industrial sectors, Pb(Ac)2 has been used as an indicator in the form of test papers with a detection limit only as low as 5 ppm. Diagnosis of halitosis by exhaled breath needs sensors able to detect down to 1 ppm of H2S gas. In this work, high surface area and porous Pb(Ac)2 anchored nanofibers (NFs) that overcome limitations of the conventional Pb(Ac)2-based H2S sensor are successfully achieved. First, lead(II) acetate, which melts at 75 °C, and polyacrylonitrile (PAN) polymer are mixed and stirred in dimethylformamide (DMF) solvent at 85 °C, enabling uniform dispersion of fine liquid droplets in the electrospinning solution. During the subsequent electrospinning, Pb(Ac)2 anchored NFs are obtained, providing an ideal nanostructure with high thermal stability against particle aggregation, numerous reactions sites, and enhanced diffusion of H2S into the three-dimensional (3D)-networked NF web. This newly obtained sensing material can detect down to 400 ppb of H2S at a relative humidity of 90%, exhibiting high potential feasibility as a high-performance colorimetric sensor platform for diagnosis of halitosis.

Glass-Fabric Reinforced Ag Nanowire/Siloxane Composite Heater Substrate: Sub-10 nm Metal@Metal Oxide Nanosheet for Sensitive Flexible Sensing Platform.

The development of flexible chemiresistors is imperative for real-time monitoring of air quality and/or human physical conditions without space constraints. However, critical challenges such as poor sensing characteristics, vulnerability under toxic chemicals, and weak reliability hinder their practical use. In this work, for the first time, an ultrasensitive flexible sensing platform is reported by assembling Pt loaded thin-layered (≈10 nm) SnO2 nanosheets (Pt-SnO2 NSs) based 2D sensing layers on Ag nanowires embedded glass-fabric reinforced vinyl-phenyl siloxane hybrid composite substrate (AgNW-GFRVPH film) as a heater. The thermally stable AgNW-GFRVPH film based heater is fabricated by free radical polymerization of vinyl groups in vinyl-phenyl oligosiloxane and phenyltris(dimethylvinylsiloxy)silane with Ag NW and glass-fabric, showing outstanding heat generation (≈200 °C), high dimensional stability (13 ppm °C-1), and good thermal stability (≈350 °C). The Pt-SnO2 NSs, which are synthesized by calcination of Sn precursor coated graphene oxide (GO) sheets and subsequent Pt functionalization, exhibit high mechanical flexibility and superior response (Rair/Rgas = 4.84) to 1 ppm level dimethyl sulfide. Taking these advantages, GO-templated oxide NSs combined with a highly stable AgNW-GFRVPH film heater exhibits the best dimethyl sulfide sensing performance compared to state-of-the-art flexible chemiresistors, enabling them as a superior flexible gas sensing platform.

Plasmonic Solar Cells: From Rational Design to Mechanism Overview.

Plasmonic effects have been proposed as a solution to overcome the limited light absorption in thin-film photovoltaic devices, and various types of plasmonic solar cells have been developed. This review provides a comprehensive overview of the state-of-the-art progress on the design and fabrication of plasmonic solar cells and their enhancement mechanism. The working principle is first addressed in terms of the combined effects of plasmon decay, scattering, near-field enhancement, and plasmonic energy transfer, including direct hot electron transfer and resonant energy transfer. Then, we summarize recent developments for various types of plasmonic solar cells based on silicon, dye-sensitized, organic photovoltaic, and other types of solar cells, including quantum dot and perovskite variants. We also address several issues regarding the limitations of plasmonic nanostructures, including their electrical, chemical, and physical stability, charge recombination, narrowband absorption, and high cost. Next, we propose a few potentially useful approaches that can improve the performance of plasmonic cells, such as the inclusion of graphene plasmonics, plasmon-upconversion coupling, and coupling between fluorescence resonance energy transfer and plasmon resonance energy transfer. This review is concluded with remarks on future prospects for plasmonic solar cell use.