RESUMO
Two-dimensional (2D) materials and their heterostructures show a promising path for next-generation electronics1-3. Nevertheless, 2D-based electronics have not been commercialized, owing mainly to three critical challenges: i) precise kinetic control of layer-by-layer 2D material growth, ii) maintaining a single domain during the growth, and iii) wafer-scale controllability of layer numbers and crystallinity. Here we introduce a deterministic, confined-growth technique that can tackle these three issues simultaneously, thus obtaining wafer-scale single-domain 2D monolayer arrays and their heterostructures on arbitrary substrates. We geometrically confine the growth of the first set of nuclei by defining a selective growth area via patterning SiO2 masks on two-inch substrates. Owing to substantial reduction of the growth duration at the micrometre-scale SiO2 trenches, we obtain wafer-scale single-domain monolayer WSe2 arrays on the arbitrary substrates by filling the trenches via short growth of the first set of nuclei, before the second set of nuclei is introduced, thus without requiring epitaxial seeding. Further growth of transition metal dichalcogenides with the same principle yields the formation of single-domain MoS2/WSe2 heterostructures. Our achievement will lay a strong foundation for 2D materials to fit into industrial settings.
RESUMO
Micro-LEDs (µLEDs) have been explored for augmented and virtual reality display applications that require extremely high pixels per inch and luminance1,2. However, conventional manufacturing processes based on the lateral assembly of red, green and blue (RGB) µLEDs have limitations in enhancing pixel density3-6. Recent demonstrations of vertical µLED displays have attempted to address this issue by stacking freestanding RGB LED membranes and fabricating top-down7-14, but minimization of the lateral dimensions of stacked µLEDs has been difficult. Here we report full-colour, vertically stacked µLEDs that achieve, to our knowledge, the highest array density (5,100 pixels per inch) and the smallest size (4 µm) reported to date. This is enabled by a two-dimensional materials-based layer transfer technique15-18 that allows the growth of RGB LEDs of near-submicron thickness on two-dimensional material-coated substrates via remote or van der Waals epitaxy, mechanical release and stacking of LEDs, followed by top-down fabrication. The smallest-ever stack height of around 9 µm is the key enabler for record high µLED array density. We also demonstrate vertical integration of blue µLEDs with silicon membrane transistors for active matrix operation. These results establish routes to creating full-colour µLED displays for augmented and virtual reality, while also offering a generalizable platform for broader classes of three-dimensional integrated devices.
RESUMO
Three-dimensional (3D) hetero-integration technology is poised to revolutionize the field of electronics by stacking functional layers vertically, thereby creating novel 3D circuity architectures with high integration density and unparalleled multifunctionality. However, the conventional 3D integration technique involves complex wafer processing and intricate interlayer wiring. Here we demonstrate monolithic 3D integration of two-dimensional, material-based artificial intelligence (AI)-processing hardware with ultimate integrability and multifunctionality. A total of six layers of transistor and memristor arrays were vertically integrated into a 3D nanosystem to perform AI tasks, by peeling and stacking of AI processing layers made from bottom-up synthesized two-dimensional materials. This fully monolithic-3D-integrated AI system substantially reduces processing time, voltage drops, latency and footprint due to its densely packed AI processing layers with dense interlayer connectivity. The successful demonstration of this monolithic-3D-integrated AI system will not only provide a material-level solution for hetero-integration of electronics, but also pave the way for unprecedented multifunctional computing hardware with ultimate parallelism.
RESUMO
BACKGROUND: Nephrin is a protein in the glomerular podocyte slit diaphragm; therefore, its presence in urine implies damage to podocytes. This study aimed to determine the usefulness of nephrin as a biomarker in maternal urine to predict preeclampsia (PE). METHODS: This prospective study included pregnant women admitted for delivery at Seoul National University Bundang Hospital from March 2019 to May 2020. Patients who had been diagnosed with PE were included, and patients without a history of underlying diseases were recruited for the control group. Pertinent clinical data were collected. Urine samples were obtained, and nephrin signaling was detected through test strips using a lateral flow assay. The point-of-care test results were compared between patients with PE and without (control group), using the exact concentration of nephrin by enzyme-linked immunosorbent assay. RESULTS: Clinical characteristics - maternal age, parity, proportion of twin pregnancies, height, weight, and cesarean delivery rate - were comparable between the PE and control groups. Nephrin signals were classified into four groups. In the PE group, signals 0, 1, 2, and 3 were found in 18.4% (9/49), 44.9% (22/49), 24.5% (12/49), and 12.2% (6/49) of participants, respectively. Results were significantly different in the control group, in which 84.3% (43/51) were found to have signal 0 (p < 0.001). CONCLUSIONS: Nephrin signaling in maternal urine could be a noninvasive and useful test for early detection of severity of PE.
Assuntos
Podócitos , Pré-Eclâmpsia , Humanos , Gravidez , Feminino , Pré-Eclâmpsia/diagnóstico , Estudos Prospectivos , Proteínas de Membrana/metabolismo , Podócitos/metabolismoRESUMO
The metallic 1T phase of WS2 (1T-WS2 ), which boosts the charge transfer between the electron source and active edge sites, can be used as an efficient electrocatalyst for the hydrogen evolution reaction (HER). As the semiconductor 2H phase of WS2 (2H-WS2 ) is inherently stable, methods for synthesizing 1T-WS2 are limited and complicated. Herein, a uniform wafer-scale 1T-WS2 film is prepared using a plasma-enhanced chemical vapor deposition (PE-CVD) system. The growth temperature is maintained at 150 °C enabling the direct synthesis of 1T-WS2 films on both rigid dielectric and flexible polymer substrates. Both the crystallinity and number of layers of the as-grown 1T-WS2 are verified by various spectroscopic and microscopic analyses. A distorted 1T structure with a 2a0 × a0 superlattice is observed using scanning transmission electron microscopy. An electrochemical analysis of the 1T-WS2 film demonstrates its similar catalytic activity and high durability as compared to those of previously reported untreated and planar 1T-WS2 films synthesized with CVD and hydrothermal methods. The 1T-WS2 does not transform to stable 2H-WS2 , even after a 700 h exposure to harsh catalytic conditions and 1000 cycles of HERs. This synthetic strategy can provide a facile method to synthesize uniform 1T-phase 2D materials for electrocatalysis applications.
RESUMO
Emergent phenomena driven by electronic reconstructions in oxide heterostructures have been intensively discussed. However, the role of these phenomena in shaping the electronic properties in van der Waals heterointerfaces has hitherto not been established. By reducing the material thickness and forming a heterointerface, we find two types of charge-ordering transitions in monolayer VSe2 on graphene substrates. Angle-resolved photoemission spectroscopy (ARPES) uncovers that Fermi-surface nesting becomes perfect in ML VSe2. Renormalization-group analysis confirms that imperfect nesting in three dimensions universally flows into perfect nesting in two dimensions. As a result, the charge-density wave-transition temperature is dramatically enhanced to a value of 350 K compared to the 105 K in bulk VSe2. More interestingly, ARPES and scanning tunneling microscopy measurements confirm an unexpected metal-insulator transition at 135 K that is driven by lattice distortions. The heterointerface plays an important role in driving this novel metal-insulator transition in the family of monolayer transition-metal dichalcogenides.
RESUMO
Ohm's law is a fundamental paradigm in the electrical transport of metals. Any transport signatures violating Ohm's law would give an indisputable fingerprint for a novel metallic state. Here, we uncover the breakdown of Ohm's law owing to a topological structure of the chiral anomaly in the Weyl metal phase. We observe nonlinear I-V characteristics in Bi0.96Sb0.04 single crystals in the diffusive limit, which occurs only for a magnetic-field-aligned electric field (Eâ¥B). The Boltzmann transport theory with the charge pumping effect reveals the topological-in-origin nonlinear conductivity, and it leads to a universal scaling function of the longitudinal magnetoconductivity, which completely describes our experimental results. As a hallmark of Weyl metals, the nonlinear conductivity provides a venue for nonlinear electronics, optical applications, and the development of a topological Fermi-liquid theory beyond the Landau Fermi-liquid theory.
RESUMO
Molybdenum oxide (MoO3) has gained immense attention because of its high electron mobility, wide band gap, and excellent optical and catalytic properties. However, the synthesis of uniform and large-area MoO3 is challenging. Here, we report the synthesis of wafer-scale α-MoO3 by plasma oxidation of Mo deposited on Si/SiO2. Mo was oxidized by O2 plasma in a plasma enhanced chemical vapor deposition (PECVD) system at 150 °C. It was found that the synthesized α-MoO3 had a highly uniform crystalline structure. For the as-synthesized α-MoO3 sensor, we observed a current change when the relative humidity was increased from 11% to 95%. The sensor was exposed to different humidity levels with fast recovery time of about 8 s. Hence this feasibility study shows that MoO3 synthesized at low temperature can be utilized for gas sensing applications by adopting flexible device technology.
RESUMO
BACKGROUND: We used optical coherence tomography (OCT) and intravascular ultrasound (IVUS) to assess the struts of implanted stents in patients with acute coronary syndrome (ACS). METHODS: A totle of 10,756 stent struts were analyzed with OCT in 42 patients of ACS. Of them, both of IVUS and OCT imaging were performed in 33 patients. Appearance of stent struts was classified as well apposed, buried, malapposed, and nondetectable, and the number of stent struts were counted by OCT and IVUS was compared. RESULTS: Most of stent struts were well apposed (78.1%, 8,407/10,756). However, malapposed struts were 5.6% (607/10,756), and 14.1% (1,514/10,756) of stent struts were buried by thrombus. The nondetectable struts were 2.11% (228/10,756) in ACS. 94.7% (216/228) of nondetectable stent struts were associated with red thrombus, and plaque prolapse was in 5.3% (12/228). The number of stent struts counted by OCT were larger than that of IVUS. The mean number of stent struts at the proximal and distal stent edges were 24 ± 6.57 in OCT, the stent struts IVUS counted were 20 ± 4.18 (P < 0.0001). Although the frequency of malapposed struts were similar 4.6% (376/8,248) in OCT versus 4.8% (369/7,674) in IVUS (P = 0.788). Stent struts were often buried by thrombus in ACS 15.2% (1,252/8,248) in OCT versus 9.7% (747/7,674) in IVUS; P = 0.006. The nondetectable struts were fewer in IVUS than OCT 0.2% (16/7,674) in IVUS versus 2.2% (187/8,248) in OCT; P < 0.0001. CONCLUSION: Stent struts are frequently buried and nondetectable due to thrombi burden in ACS patients. Adequate thrombus removal and proper selection of the imaging device is warranted in ACS.
Assuntos
Síndrome Coronariana Aguda/cirurgia , Intervenção Coronária Percutânea/efeitos adversos , Complicações Pós-Operatórias/diagnóstico , Stents/efeitos adversos , Tomografia de Coerência Óptica/métodos , Ultrassonografia de Intervenção/métodos , Idoso , Pesquisa Comparativa da Efetividade , Análise de Falha de Equipamento , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Intervenção Coronária Percutânea/instrumentação , Intervenção Coronária Percutânea/métodos , Reprodutibilidade dos TestesRESUMO
We derive an effective Maxwell-London equation for entangled polymer complexes under topological constraints, borrowing the theoretical framework from topological field theory. We find that the transverse current flux of a test polymer chain, surrounded by entangled chains, decays exponentially from its centerline position with a finite penetration depth, which is analogous to the magnetic-field decay in a superconductor (SC), referred to as the Meissner effect. Just as the mass acquirement of photons in a SC is the origin of the magnetic-field decay, the polymer obtains uncrossable intersections along the chain due to the preservation of the linking number, which restricts the deviation of the transverse polymer current in the normal direction. The underlying physics is as follows: less flexible polymers have stronger current-current correlations, giving rise to a heavier effective mass of the gauge fields and resulting in a shorter decay length. Interestingly, this picture is well incorporated within the most successful phenomenological theory of the, so called, tube model, the microscopic origins of which researchers have long pursued. The correspondence of our equation of motion to the tube model claims that the confining tube potential is a consequence of the topological constraint (linking number). The tube radius is attributed to the decay length. On increasing the effective mass (by strengthening the interaction at an uncrossable intersection or a number of intersections), the tube becomes narrower. Using this argument, the exponential decay of the chain leakage out of the tube is well understood.
RESUMO
BACKGROUND: This study analyzed PWAs in patients with high Framingham risk scores to determine whether PWA is predictive of coronary artery disease (CAD) severity and percutaneous coronary intervention (PCI) treatment. METHODS: In total, 310 patients were screened due to suspected CAD; 78 were excluded due to PCI history (32), atrial fibrillation (11), or acute myocardial infarction (35). The augmentation index (AIx) was analyzed immediately before coronary angiography. PCI was performed in 73 (31.5 %) patients. RESULTS: The mean AIx, adjusted by heart rate (AIx@75) was different for each clinical diagnosis in the PCI group (stable angina, 30.6 ± 7.7 %; silent ischemia, 30.2 ± 8.6 %; unstable angina, 38.5 ± 8.5 %; p = 0.026). The 10-year estimate of CVD risk, based on the Framingham heart score, was 25.3 ± 6.5 % and the mean AIx@75 was 31.6 ± 8.5 % in the PCI group, significantly higher than in the non-PCI group (18.8 ± 10.2 %, p < 0.001; 27.2 ± 9.0 %, p = 0.006, respectively). An inverse correlation was observed between the minimal luminal area and AIx@75 (rho = -0.559, p = 0.010, n = 20). In ROC curve analysis of multivariate logistic regression model, higher HDL, medication of hypertension, and higher body mass index were associated with non-PCI and higher AIx@75 was associated with PCI (area under the curve, 0.764; 95 % CI: 0.701 to 0.819, z = 8.005; p <0.001). CONCLUSIONS: The AIx@75 seemed to reflect the clinical severity of CAD and was associated with PCI in patients with a high Framingham risk score.
Assuntos
Doença da Artéria Coronariana/diagnóstico , Análise de Onda de Pulso , Idoso , Angiografia Coronária , Doença da Artéria Coronariana/cirurgia , Feminino , Hospitais Universitários , Humanos , Masculino , Pessoa de Meia-Idade , Intervenção Coronária Percutânea , República da Coreia , Fatores de Risco , Índice de Gravidade de DoençaRESUMO
Landau's Fermi-liquid theory is the standard model for metals, characterized by the existence of electron quasiparticles near a Fermi surface as long as Landau's interaction parameters lie below critical values for instabilities. Recently this fundamental paradigm has been challenged by the physics of strong spin-orbit coupling, although the concept of electron quasiparticles remains valid near the Fermi surface, where Landau's Fermi-liquid theory fails to describe the electromagnetic properties of this novel metallic state, referred to as Weyl metal. A novel ingredient is that such a Fermi surface encloses a Weyl point with definite chirality, referred to as a chiral Fermi surface, which can arise from breaking of either time reversal or inversion symmetry in systems with strong spin-orbit coupling, responsible for both the Berry curvature and the chiral anomaly. As a result, electromagnetic properties of the Weyl metallic state are described not by conventional Maxwell equations but by axion electrodynamics, where Maxwell equations are modified with a topological-in-origin spatially modulated [Formula: see text] term. This novel metallic state was realized recently in Bi[Formula: see text]Sb x around [Formula: see text] under magnetic fields, where the Dirac spectrum appears around the critical point between the normal semiconducting ([Formula: see text]) and topological semiconducting phases ([Formula: see text]) and the time reversal symmetry breaking perturbation causes the Dirac point to split into a pair of Weyl points along the direction of the applied magnetic field for a very strong spin-orbit coupled system. In this review article, we discuss how the topological structure of both the Berry curvature and the chiral anomaly (axion electrodynamics) gives rise to anomalous transport phenomena in [Formula: see text]Sb x around [Formula: see text] under magnetic fields, thus modifying the Drude model of Landau's Fermi liquids.
RESUMO
The primary challenge facing silicon-based electronics, crucial for modern technological progress, is difficulty in dimensional scaling. This stems from a severe deterioration of transistor performance due to carrier scattering when silicon thickness is reduced below a few nanometres. Atomically thin two-dimensional (2D) semiconductors still maintain their electrical characteristics even at sub-nanometre scales and offer the potential for monolithic three-dimensional (3D) integration. Here we explore a strategic shift aimed at addressing the scaling bottleneck of silicon by adopting 2D semiconductors as new channel materials. Examining both academic and industrial viewpoints, we delve into the latest trends in channel materials, the integration of metal contacts and gate dielectrics, and offer insights into the emerging landscape of industrializing 2D semiconductor-based transistors for monolithic 3D integration.
RESUMO
Negative-differential-resistance (NDR) devices offer a promising pathway for developing future computing technologies characterized by exceptionally low energy consumption, especially multivalued logic computing. Nevertheless, conventional approaches aimed at attaining the NDR phenomenon involve intricate junction configurations and/or external doping processes in the channel region, impeding the progress of NDR devices to the circuit and system levels. Here, an NDR device is presented that incorporates a channel without junctions. The NDR phenomenon is achieved by introducing a metal-insulator-semiconductor capacitor to a portion of the channel area. This approach establishes partial potential barrier and well that effectively restrict the movement of hole and electron carriers within specific voltage ranges. Consequently, this facilitates the implementation of both a ternary inverter and a ternary static-random-access-memory, which are essential components in the development of multivalued logic computing technology.
RESUMO
Dirac metals (gapless semiconductors) are believed to turn into Weyl metals when perturbations, which break either time reversal symmetry or inversion symmetry, are employed. However, no experimental evidence has been reported for the existence of Weyl fermions in three dimensions. Applying magnetic fields near the topological phase transition from a topological insulator to a band insulator in Bi1-xSbx we observe not only the weak antilocalization phenomenon in magnetoconductivity near zero magnetic fields (B<0.4 T), but also its upturn above 0.4 T only for E//B. This "incompatible" coexistence between weak antilocalization and "negative" magnetoresistivity is attributed to the Adler-Bell-Jackiw anomaly ("topological" E·B term) in the presence of weak antilocalization corrections.
RESUMO
We propose a phase diagram for Fe(x)Bi2Te3 (0≤x≤0.1) single crystals, which belong to a class of magnetically bulk-doped topological insulators. The evolution of magnetic correlations from ferromagnetic to antiferromagnetic gives rise to topological phase transitions, where the paramagnetic topological insulator of Bi2Te3 turns into a band insulator with ferromagnetic-cluster glassy behavior around xâ¼0.025, and it further evolves to a topological insulator with valence-bond glassy behavior, which spans over the region from xâ¼0.03 up to xâ¼0.1. This phase diagram is verified by measuring magnetization, magnetotransport, and angle-resolved photoemission spectra with theoretical discussions.
RESUMO
The effect of the dual-etch surface roughening method consisting of dry etching and wet etching on the enhancement of light extraction of vertical light emitting diodes (VLEDs) is investigated. The surface of a VLED was roughened by dry etching using SiO2 spheres as the mask while a KOH solution was used for wet etching. After the surface of the VLED was roughened by the dual-etch method, the luminous efficiency of the VLED increased due to the formation of uniform, nano-scale cone shapes and the decreased flat area ratio of the total GaN surface. The VLED roughened by dual etching showed about 9.3% higher emitted luminous efficiency than the VLED roughened using wet etching.
RESUMO
The properties of Pd/Ir/Au ohmic metallization on p-type GaN have been investigated. Contacts annealed at 400 degrees C in O2 atmosphere demonstrated excellent ohmic characteristics with a specific contact resistivity of 1.5 x 10(-5) Omega-cm2. This is attributed to the formation of Ga vacancies at the contact metal-semiconductor interfacial region due to the out-diffusion of Ga atoms. The out-diffusion of Ga atoms was confirmed by X-ray photoelectron spectroscopy depth profiles, high-resolution transmission electron microscopy, and electron energy loss spectroscopy using a scanning transmission electron microscope.
RESUMO
The significant discrepancy observed between the predicted and experimental switching fields in correlated insulators under a DC electric field far-from-equilibrium necessitates a reevaluation of current microscopic understanding. Here we show that an electron avalanche can occur in the bulk limit of such insulators at arbitrarily small electric field by introducing a generic model of electrons coupled to an inelastic medium of phonons. The quantum avalanche arises by the generation of a ladder of in-gap states, created by a multi-phonon emission process. Hot-phonons in the avalanche trigger a premature and partial collapse of the correlated gap. The phonon spectrum dictates the existence of two-stage versus single-stage switching events which we associate with charge-density-wave and Mott resistive phase transitions, respectively. The behavior of electron and phonon temperatures, as well as the temperature dependence of the threshold fields, demonstrates how a crossover between the thermal and quantum switching scenarios emerges within a unified framework of the quantum avalanche.
RESUMO
The concept of remote epitaxy involves a two-dimensional van der Waals layer covering the substrate surface, which still enable adatoms to follow the atomic motif of the underlying substrate. The mode of growth must be carefully defined as defects, e.g., pinholes, in two-dimensional materials can allow direct epitaxy from the substrate, which, in combination with lateral epitaxial overgrowth, could also form an epilayer. Here, we show several unique cases that can only be observed for remote epitaxy, distinguishable from other two-dimensional material-based epitaxy mechanisms. We first grow BaTiO3 on patterned graphene to establish a condition for minimizing epitaxial lateral overgrowth. By observing entire nanometer-scale nuclei grown aligned to the substrate on pinhole-free graphene confirmed by high-resolution scanning transmission electron microscopy, we visually confirm that remote epitaxy is operative at the atomic scale. Macroscopically, we also show variations in the density of GaN microcrystal arrays that depend on the ionicity of substrates and the number of graphene layers.