Broadband light-absorption InGaN photoanode assisted by imprint patterning and ZnO nanowire growth for energy conversion.

In this research, an InGaN-based photoanode with a broadband light-absorption range from ultraviolet to green, patterned by imprint lithography and branched by ZnO nanowires, has been applied to water splitting. Over the solar spectrum range, the absorbance increases due to the scattering effect of the micro-structure compared to that of flat surface InGaN, which reaches a maximum of over 90% at 380 nm as ZnO nanowires are further employed in this novel photoanode. Consequently, the induced photocurrent density of the InGaN photoanode with a domelike structure and ZnO nanowires on the surface shows a remarkable enhancement of seven times that of the one with a flat surface. Further investigation indicates the wet-etching process for defect removal has an essential impact on photocurrent efficiency. This design demonstrates an innovative approach for water splitting.

Uniformly embedded silver nanomesh as highly bendable transparent conducting electrode.

Ag-nanomesh-based highly bendable conducting electrodes are developed using a combination of metal nanotransfer printing and embossing for the 6-inch wafer scale. Two Ag nanomeshes, including pitch sizes of 7.5 and 10 µm, are used to obtain highly transparent (approximately 85% transmittance at a wavelength of 550 nm) and electrically conducting properties (below 10 Ω sq(-1)). The Ag nanomeshes are also distinguished according to the fabrication process, which is called transferred or embedded Ag nanomesh on polyethylene terephthalate (PET) substrate, in order to compare their stability against bending stress. Then the enhancement of bending stability when the Ag nanomesh is embedded in the PET substrate is confirmed.

Corrigendum: Demonstration of nanoimprinted hyperlens array for high-throughput sub-diffraction imaging.

This corrects the article DOI: 10.1038/srep46314.

Demonstration of nanoimprinted hyperlens array for high-throughput sub-diffraction imaging.

Overcoming the resolution limit of conventional optics is regarded as the most important issue in optical imaging science and technology. Although hyperlenses, super-resolution imaging devices based on highly anisotropic dispersion relations that allow the access of high-wavevector components, have recently achieved far-field sub-diffraction imaging in real-time, the previously demonstrated devices have suffered from the extreme difficulties of both the fabrication process and the non-artificial objects placement. This results in restrictions on the practical applications of the hyperlens devices. While implementing large-scale hyperlens arrays in conventional microscopy is desirable to solve such issues, it has not been feasible to fabricate such large-scale hyperlens array with the previously used nanofabrication methods. Here, we suggest a scalable and reliable fabrication process of a large-scale hyperlens device based on direct pattern transfer techniques. We fabricate a 5 cm × 5 cm size hyperlenses array and experimentally demonstrate that it can resolve sub-diffraction features down to 160 nm under 410 nm wavelength visible light. The array-based hyperlens device will provide a simple solution for much more practical far-field and real-time super-resolution imaging which can be widely used in optics, biology, medical science, nanotechnology and other closely related interdisciplinary fields.

InGaN-based photoanode with ZnO nanowires for water splitting.

The water splitting properties of InGaN photoanodes equipped with ZnO nanowires were examined in this study. Over the solar spectrum range, the absorbance exhibited a remarkable increase due to the enhanced light absorption caused by the ZnO nanowires. By varying the ZnO nanowires length, the photo-to-current density of photoanodes was increased from 0.017 to 0.205 mA/cm2 at 1.23 V versus reversible hydrogen electrode. Consequently, the incident-photon-to-current efficiency was increased by a factor of 5.5 as the ZnO nanowires growth time increased from 2 to 4 h. The results of this research demonstrate the importance of light absorbance and the surface reaction sites of photoanodes on energy harvesting.