Electrochemical Synthesis of 2-Aryl-3-(2-aminoaryl)quinoxalines via Oxidative Dearomatization/Ring-Opening/Cyclization Cascade Sequence of 2-Arylindoles with 1,2-Diaminoarenes.

A straightforward method has been developed to synthesize 2-aryl-3-(2-aminoaryl) quinoxalines from 2-arylindoles and 1,2-diaminoarenes under mild electrochemical conditions. The reaction proceeds through in situ generations of 2-arylindole-3-ones under electrochemical oxidative dearomatization of 2-arylindoles, followed by a ring opening-cyclization sequence with 1,2-diaminoarenes. A series of 2-aryl-3-(2-aminoaryl) quinoxalines have been prepared with moderate to good yields (up to 75%).

Fabrication of polyaniline/graphene oxide composites for implementation in humidity sensing.

This work reports the measurement of impedance variations under various humidity conditions at frequency ranges between 100 Hz and 5 MHz. An electrochemical polymerization process has been used in the synthesis including varying the mass ratios of graphene oxide (GO) in polyaniline. An electrochemical deposition method has been used to produce a sample film on an indium tin oxide glass slide. The percentage relative humidity (RH%) of the samples has been estimated to be 20-90%. Impedance and humidity had an inverse relationship, i.e. the impedance value decreased with an increase in humidity. In contrast with platinum capacitive humidity sensors (HS), the GO-based HS had a sensitivity of 75-99%, which was ~10-fold more than that of traditional sensors. With three different parameter weight % of GO, the frequency range have been 100 Hz to 5 MHz and RH% has been found to 20-90%. The HS showed a fast response and recovery time. Therefore, GO appears to be a useful material for building HS with high sensitivity for a comprehensive approach.

Investigation of efficient photoconduction and enhanced luminescence characteristics of Ce-doped ZnO nanophosphors for UV sensors.

This study involves the single-step, mass-scale productive synthesis, photoconduction, and luminescence characteristics of pure and cerium rare-earth-ion-doped ZnO (CZO) nanophosphors with different Ce concentrations (Ce: 0, 2, 4, 6, and 8 wt.%) synthesized using the solid-state reaction method. The synthesized nanophosphors were characterized for their structural, morphological, optical, and photoconductivity (PC) properties using X-ray diffraction (XRD), field-effect scanning electron microscopy (FE-SEM), energy dispersive spectroscopy, Fourier-transform infrared (FT-IR), photoluminescence (PL), and PC measurements. The sharp diffraction peaks of XRD results exhibit the formation of crystalline hexagonal wurtzite ZnO nanostructures. The decrease in diffraction peak intensities of CZO with an increase in Ce concentrations signifies the deterioration of the ZnO crystal. FE-SEM images exhibit the good crystalline quality of nanophosphors composed of spherical- and elongated-shaped nanoparticles that are distributed consistently on the surface. The energy dispersive X-ray pattern of the 4 wt.% Ce-doped ZnO (CZO4 ) sample confirms the doping of Ce in ZnO. The presence of chemical bonds and functional groups corresponds to transmittance peaks established using FT-IR spectroscopy. Deconvoluted PL spectra show two major emission peaks, one in the UV region, which is near-band-edge, and the other in the visible region ranging from ~456 to 561 nm. In PC studies, current-voltage (I-V) and current-time (I-T) characteristics, that is, rise/decayin current under dark as well as UV light conditions, are also investigated. Efficient photoconduction is observed in CZO samples. The obtained results indicate the suitability to luminescent and photosensor applications.

Electrochemical Oxidative Addition of Nucleophiles on 2-Arylindoles: Synthesis of C2-Heteroquaternary Indolin-3-ones.

An electrochemical method has been developed to synthesize 2,2-disubstituted indolin-3-ones under mild conditions. A series of nucleophiles have been added to the 2-arylindole-3-ones, generated in situ under metal-free electrochemical oxidative dearomatization of 2-arylindoles, to afford 2,2-disubstituted 3-carbonyl indoles with heteroquaternary centers in 57-79% yields.

Catalyst-free direct regiospecific multicomponent synthesis of C3-functionalized pyrroles.

An operationally simple catalyst-free protocol for the direct regiospecific synthesis of ß-(C3)-substituted pyrroles has been developed. The enamine intermediate, in situ generated from succinaldehyde and a primary amine, was trapped with activated carbonyls before the Paal-Knorr reaction in a direct multicomponent "just-mix" fashion to furnish pyrroles with overall good yields. Several C3-substituted N-alkyl/aryl/H pyrroles have been produced under open-flask conditions with high atom economy and avoiding protection-deprotection chemistry.

Asymmetric Synthesis of Bridged N-Heterocycles with Tertiary Carbon Center through Barbas Dienamine-Catalysis: Scope and Applications.

A direct aza-Diels-Alder reaction between 2-aryl-3H-indolin-3-ones and cyclic-enones has been developed to access chiral indolin-3-one fused polycyclic bridged compounds. This method proceeds via proline-catalyzed Barbas-dienamine intermediate formation from various cyclic-enones such as 2-cyclopenten-1-one, 2-cyclohexene-1-one, and 2-cycloheptene-1-one, followed by a reaction with 2-aryl-3H-indol-3-ones. Several indolin-3-ones fusing [2.2.2], [2.2.1], and [3.2.1] skeletons decorated with a tertiary carbon chiral center have been prepared. Computational studies (DFT) supported the observed stereoselectivity in the method. The synthesized compounds have shown exciting photophysical activities and selective sensing of Pd2+ and Fe3+ ions through the fluorescence quenching "switch-off" mode.

Electrochemical Oxidative Coupling Between Benzylic C(sp3)-H and N-H of Secondary Amines: Rapid Synthesis of α-Amino α-Aryl Esters.

An intermolecular electrochemical coupling between the benzylic C(sp3)-H bond and various secondary amines is reported. The electronic behavior of two electronically rich units viz the α-position of α-aryl acetates and amines was engineered electrochemically, thus facilitating their reactivity for the direct access of α-amino esters. A series of acyclic/cyclic secondary amines and α-aryl acetates were tested to furnish the corresponding α-amino esters with high yields (up to 92%) under mild conditions.

Two-pot synthesis and photophysical studies of 1,6-disubstituted 5-aza-indoles from succinaldehyde and N-aryl propargylic-imines.

A two-pot synthesis of 5-aza-indoles has been developed from aqueous succinaldehyde and N-aryl propargylic-imines. This overall protocol involves: (i) the metal-free [3 + 2] annulation of aqueous succinaldehyde and N-aryl propargylic-imines to access 2-alkynyl-pyrrole-3-aldehydes and (ii) Ag-catalyzed 6-endo-dig-cyclization to obtain substituted 5-aza-indoles in the second pot. The 5-aza-indoles showed engaging photophysical activities, and the practicality of this pot-economic gram-scale synthesis has been demonstrated.

Direct Amine-Catalyzed Enantioselective Synthesis of Pentacyclic Dibenzo[b,f][1,4]oxazepine/Thiazepine-Fused Isoquinuclidines along with DFT Calculations.

A direct protocol for the asymmetric synthesis of dibenzoxazepine/thiazepine-fused [2.2.2] isoquinuclidines is developed. The reaction proceeds through a proline-catalyzed direct Mannich reaction followed by an intramolecular aza-Michael cascade sequence between 2-cyclohexene-1-one and various tricyclic imines, like dibenzoxazepines/thiazepines, as an overall [4 + 2] aza-Diels-Alder reaction. A series of pentacyclic isoquinuclidines have been prepared, with complete endo-selectivity, in good to high yields and excellent enantioselectivity (>99:1). Density functional theory (DFT) calculations further support the observed high stereochemical outcome of the reaction.

Sequential multicomponent site-selective synthesis of 4-iodo and 5-iodopyrrole-3-carboxaldehydes from a common set of starting materials by tuning the conditions.

A simple and straightforward method for the synthesis of 4-iodo and 5-iodopyrrole-3-carboxaldehydes is developed from a common set of starting materials by tuning the reaction conditions. This sequential multicomponent protocol involves I2-mediated regioselective C4-iodination and aromatization of intermediate dihydropyrrole, generated through proline-catalyzed direct Mannich reaction-cyclization sequence between succinaldehyde and imines, to access 4-iodopyrroles. While aerobic oxidative aromatization of dihydropyrrole to pyrrole followed by NIS-mediated regioselective iodination furnished 5-iodopyrroles in a two-pot fashion. A series of site-selective C4/C5-iodopyrroles have been synthesized in good to high yields (up to 78%) and DFT calculations of these compounds were also performed.

Enantio- and Diastereoselective Two-Pot Synthesis of Isoquinuclidines from Glutaraldehyde and N-Aryl Imines with DFT Calculations.

A pot-economic method for the enantio- and diastereoselective synthesis of a [2.2.2] azabicyclic isoquinuclidine system is developed. This protocol involves the proline-catalyzed direct Mannich reaction-cyclization/IBX-mediated site-selective oxidation/NaBH4-reduction sequence between glutaraldehyde and imines to generate in situ chiral 1,2-DHPs, followed by the diastereoselective Diels-Alder reaction with N-aryl maleimides furnishing isoquinuclidines in overall five steps. A variety of isoquinuclidines having five-contiguous chiral centers, including an all-carbon quaternary, were prepared with high yields (up to 78%) and excellent stereoselectivity (>50:1 dr, and up to >99:1 er). DFT calculations support the observed high stereoselective reaction outcome.

One-Pot Synthesis of Chiral Tetracyclic Dibenzo[ b, f][1,4]oxazepine-Fused 1,2-Dihydropyridines (DHPs) under Metal-Free Conditions.

An efficient protocol for the catalytic asymmetric synthesis of new dibenzo[ b, f][1,4]-oxazepine-fused 1,2-dihydropyridines (DHPs) has been described under metal-free conditions. This reaction proceeds through proline-catalyzed direct Mannich/cyclization between seven-membered dibenzo[ b, f][1,4]-oxazepine-imines and aqueous glutaraldehyde, followed by IBX-mediated site-selective dehydrogenative oxidation in one-pot operation with high yields (up to 92%) and excellent enantioselectivity (up to >99:1 er).

Metal-free regioselective formation of C-N and C-O bonds with the utilization of diaryliodonium salts in water: facile synthesis of N-arylquinolones and aryloxyquinolines.

Regioselective construction of crucial C-N and C-O bonds leading to N-arylquinolones and aryloxyquinolines has been accomplished by employing easily accessible diaryliodonium salts and quinolones in water under metal- and ligand-free conditions. This operationally simple strategy is significant due to mild reaction conditions, high product yields, recyclability of released iodoarenes and scalability to the gram level. The practical utility of the developed protocol was proved by the arylation of medicinally important heterocycles like acridin-9(10H)-one, 3-methylquinoxalin-2(1H)-one and 1H-benzo[d]imidazol-2(3H)-one.

Linear dialdehydes as promising substrates for aminocatalyzed transformations.

Organocatalytic domino reactions involving amine activation of carbonyl compounds have become the latest chemical technology towards the design and development of useful synthetic methods. In this direction, linear dialdehydes such as succinaldehyde, glutaraldehyde, and other homologous compounds have attracted considerable attention as suitable substrates for amine catalyzed transformations. Due to their unique structural features, dialdehydes can easily engage in recreation of cascade/tandem transformations for the synthesis of valuable natural products and drug molecules. In this review article we discuss the current scenario and potential applications of linear dialdehydes as adequate synthetic substrates for amine catalyzed transformations to access biologically important complex scaffolds.

Asymmetric trienamine catalysis: new opportunities in amine catalysis.

Amine catalysis, through HOMO-activating enamine and LUMO-activating iminium-ion formation, is receiving increasing attention among other organocatalytic strategies, for the activation of unmodified carbonyl compounds. Particularly, the HOMO-raising activation concept has been applied to the greatest number of asymmetric transformations through enamine, dienamine, and SOMO-activation strategies. Recently, trienamine catalysis, an extension of amine catalysis, has emerged as a powerful tool for synthetic chemists with a novel activation strategy for polyenals/polyenones. In this review article, we discuss the initial developments of trienamine catalysis for highly asymmetric Diels-Alder reactions with different dienophiles and emerging opportunities for other types of cycloadditions and cascade reactions.

Sustainable smart anti-corrosion coating materials derived from vegetable oil derivatives: a review.

Sustainable development is a critical concern in this fast-paced technological world. Therefore, it is essential to employ renewable resources to move towards sustainable development goals (SDGs). The polyols attained from renewable resources, including lignin, chitosan, vegetable oils, cellulose, etc. and the polymers derived from them have attracted the attention of the majority of researchers, both in academia and industry. The development of bio-based polymers from vegetable oils start emerging with different properties to generate a value-added system. This review will give an impression to readers about how coatings generated from vegetable oils can find a way towards better protective properties against corrosion either by using fillers or by using molecular structure modifications in the system, thus covering a range of vegetable oil-based self-healing polymers and their application in anti-corrosion coatings.

Formation of hierarchical assemblies by collagen peptides derived from fish skin and bladder and their subsequent application as antiperoxide agents in lipid-rich food.

This study attempts to identify the significant role played by the secondary and tertiary structure of collagen-derived peptides that are involved in lipid peroxide quenching in food products. Fish collagen hydrolysate (CH) was extracted with an efficiency of 70%. The constituent peptides of CH (8.2-9.7 kDa) existed in a polyproline-II (PP-II) conformation and at a minimum concentration of 1 mg ml-1 and pH range 7 to 8, assembled into a stable, hierarchical, quasi-fibrillar (QF) network. The peroxide quenching activity of this QF-CH increased with increasing ionic stability of the assembly and decreased upon proteolytic dismantling. Upon being used as an additive, the QF-CH reduced peroxide formation by 84.5% to 98.9% in both plant and fish-based oil and increased the shelf life of soya oil by a factor of 5 after 6 months of storage. The addition of QF-CH to cultured cells quenched peroxide ions generated in situ and decreased stressor activity by a factor of 12.16 abundant peptides were identified from the CH. The reason behind the high efficacy displayed by CH was attributed to its unique charge distribution, prevalence of proton-donating amino acid residues and proximal charge delocalization by the QF network, making fish derived CH a suitable substitute for antiperoxide agents in lipid-rich food.

4-Meth-oxy-N-(4-nitro-benz-yl)aniline.

In the title compound, C(14)H(14)N(2)O(3), the nitro group is nearly coplanar with the benzene ring to which it is bonded [dihedral angle = 1.70 (2)°], and this ring is para-substituted by the amino-methyl-ene group. The dihedral angle between the benzene rings is 57.8 (1)°. The crystal structure is stabilized by N-H⋯O and C-H⋯O hydrogen bonds and weak C-H⋯π inter-actions are also observed.

Detailed Kinetic and Mechanistic Study for the Preparation of Silver Nanoparticles by a Chemical Reduction Method in the Presence of a Neuroleptic Agent (Gabapentin) at an Alkaline pH and its Characterization.

For the very first time, a detailed kinetic study for the preparation of silver nanoparticles (silver NPs) by neuroleptic agent gabapentin (GBP) in the absence of a stabilizer has been reported in this investigation. This paper is devoted to the preparation of silver nanoparticles by a chemical reduction method in which gabapentin acts as both a reductant and a stabilizer, and AgNO3 is used as a source of Ag+ ions and NaOH for maintaining the alkaline medium. A UV-visible spectrophotometer is used to monitor the progress of the reaction kinetics in an aqueous medium by changing the concentration of different variables such as AgNO3, NaOH, and gabapentin at 40 °C. It is found that the reaction rate follows a pseudo-first-order reaction. The thermodynamic activation parameters were also studied at five different temperatures (303, 308, 313, 318, and 323 K) and used in the support of the proposed mechanistic scheme for the formation of silver nanoparticles. The prepared silver nanoparticles were characterized using different techniques: UV-visible spectrophotometry, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and powder X-ray diffraction. The average particle size was observed in the range of 5-45 nm.

Stereoselective Oxidative Mannich Reaction of Ketones with Dihydrodibenzo-Oxazepines via a Merger of Photoredox-/Electro-Catalysis with Organocatalysis.

An enantio- and diastereoselective sp3 -sp3 coupling of acyclic/cyclic ketones with dihydrodibenzo-oxazepines has been developed by merging visible light photo-redox- or electro-catalysis with organocatalysis. This approach parallelly utilizes Eosin Y or graphite electrodes for the co-catalyst-free oxidative conversion of dihydrodibenzo-oxazepines to oxazepines, followed by L-Proline catalyzed direct Mannich-type reaction with ketones. A series of enantioenriched dihydrodibenzo-oxazepines have been prepared in high yields and enantioselectivity. This method shows substantial advantages over the existing protocols by using potentially safer starting materials and cheap commercially available catalysts.