Antiferroelectricity-Induced Negative Thermal Expansion in Double Perovskite Pb2 CoMoO6.

Materials with negative thermal expansion (NTE) attract significant research attention owing to their unique physical properties and promising applications. Although ferroelectric phase transitions leading to NTE are widely investigated, information on antiferroelectricity-induced NTE remains limited. In this study, single-crystal and polycrystalline Pb2 CoMoO6 samples are prepared at high pressure and temperature conditions. The compound crystallizes into an antiferroelectric Pnma orthorhombic double perovskite structure at room temperature owing to the opposite displacements dominated by Pb2+ ions. With increasing temperature to 400 K, a structural phase transition to cubic Fm-3m paraelectric phase occurs, accompanied by a sharp volume contraction of 0.41%. This is the first report of an antiferroelectric-to-paraelectric transition-induced NTE in Pb2 CoMoO6 . Moreover, the compound also exhibits remarkable NTE with an average volumetric coefficient of thermal expansion αV = -1.33 × 10-5 K-1 in a wide temperature range of 30-420 K. The as-prepared Pb2 CoMoO6 thus serves as a prototype material system for studying antiferroelectricity-induced NTE.

High-Pressure Synthesis of Quadruple Perovskite Oxide CaCu3Cr2Re2O12 with a High Ferrimagnetic Curie Temperature.

An AA'3B2B'2O12-type quadruple perovskite oxide of CaCu3Cr2Re2O12 was synthesized at 18 GPa and 1373 K. Both an A- and B-site ordered quadruple perovskite crystal structure was observed, with the space group Pn-3. The valence states are verified to be CaCu32+Cr23+Re25+O12 by bond valence sum calculations and synchrotron X-ray absorption spectroscopy. The spin interaction among Cu2+, Cr3+, and Re5+ generates a ferrimagnetic transition with the Curie temperature (TC) at about 360 K. Moreover, electric transport properties and specific heat data suggest the presence of a half-metallic feature for this compound. The present study provides a promising quadruple perovskite oxide with above-room-temperature ferrimagnetism and possible half-metallic properties, which shows potential in the usage of spintronic devices.

Enhancing Reversibility and Kinetics of Anionic Redox in O3-NaLi1/3Mn2/3O2 through Controlled P2 Intergrowth.

Anionic redox chemistry can surpass theoretical limits of conventional layered oxide cathodes in energy density. A recent model system of sodium-ion batteries, O3-NaLi1/3Mn2/3O2, demonstrated full anionic redox capacity but is limited in reversibility and kinetics due to irreversible structural rearrangement and oxygen loss. Solutions to these issues are missing due to the challenging synthesis. Here, we harness the unique structural richness of sodium layered oxides and realize a controlled ratio of P2 structural intergrowth in this model compound with the overall composition maintained. The resulted O3 with 27% P2 intergrowth structure delivers an excellent initial Coulombic efficiency of 87%, comparable to the state-of-the-art Li-rich NMCs. This improvement is attributed to the effective suppression of irreversible oxygen release and structural changes, evidenced by operando Differential Electrochemical Mass Spectroscopy and X-ray Diffraction. The as-prepared intergrowth material, based on the environmentally benign Mn, exhibits a reversible capacity of 226 mAh g-1 at C/20 rate with excellent cycling stability stemming from the redox reactions of oxygen and manganese. Our work isolates the role of P2 structural intergrowth and thereby introduces a novel strategy to enhance the reversibility and kinetics of anionic redox reactions in sodium layered cathodes without compromising capacity.

Insights into Reversible Sodium Intercalation in a Novel Sodium-Deficient NASICON-Type Structure:Na3.40 □0.60 Co0.5 Fe0.5 V(PO4 )3.

The rational design of novel high-performance cathode materials for sodium-ion batteries is a challenge for the development of the renewable energy sector. Here, a new sodium-deficient NASICON phosphate, namely Na3.40 □0.60 Co0.5 Fe0.5 V(PO4 )3 , demonstrating the excellent electrochemical performance is reported. The presence of Co allows a third Na+ to participate in the reaction thus exhibiting a high reversible capacity of ≈155 mAh g-1 in the voltage range of 2.0-4.0 V versus Na+ /Na with a reversible single-phase mechanism and a small volume shrinkage of ≈5.97% at 4.0 V. 23 Na solid-state nuclear magnetic resonance (NMR) combined with ex situ X-ray diffraction (XRD) refinements provide evidence for a preferential Na+ insertion within the Na2 site. Furthermore, the enhanced sodium kinetics ascribed to Co-substitution is also confirmed in combination with electrochemical impedance spectroscopy (EIS), galvanostatic intermittent titration technique (GITT), and theoretical calculation.

Presence of Delocalized Ti 3d Electrons in Ultrathin Single-Crystal SrTiO3.

Strontium titanate (STO), with a wide spectrum of emergent properties such as ferroelectricity and superconductivity, has received significant attention in the community of strongly correlated materials. In the strain-free STO film grown on the SrRuO3 buffer layer, the existing polar nanoregions can facilitate room-temperature ferroelectricity when the STO film thickness approaches 10 nm. Here we show that around this thickness scale, the freestanding STO films without the influence of a substrate show the tetragonal structure at room temperature, contrasting with the cubic structure seen in bulk form. The spectroscopic measurements reveal the modified Ti-O orbital hybridization that causes the Ti ion to deviate from its nominal 4+ valency (3d0 configuration) with excess delocalized 3d electrons. Additionally, the Ti ion in TiO6 octahedron exhibits an off-center displacement. The inherent symmetry lowering in ultrathin freestanding films offers an alternative way to achieve tunable electronic structures that are of paramount importance for future technological applications.

Highly Oxidative-Resistant Cyano-Functionalized Lithium Borate Salt for Enhanced Cycling Performance of Practical Lithium-Ion Batteries.

Lithium difluoro(oxalato) borate (LiDFOB) has been widely investigated in lithium-ion batteries (LIBs) owing to its advantageous thermal stability and excellent aluminum passivation property. However, LiDFOB tends to suffer from severe decomposition and generate a lot of gas species (e.g., CO2 ). Herein, a novel cyano-functionalized lithium borate salt, namely lithium difluoro(1,2-dihydroxyethane-1,1,2,2-tetracarbonitrile) borate (LiDFTCB), is innovatively synthesized as a highly oxidative-resistant salt to alleviate above dilemma. It is revealed that the LiDFTCB-based electrolyte enables LiCoO2 /graphite cells with superior capacity retention at both room and elevated temperatures (e.g., 80 % after 600 cycles) with barely any CO2 gas evolution. Systematic studies reveal that LiDFTCB tends to form thin and robust interfacial layers at both electrodes. This work emphasizes the crucial role of cyano-functionalized anions in improving cycle lifespan and safety of practical LIBs.

Mo-Incorporated Magnetite Fe3 O4 Featuring Cationic Vacancies Enabling Fast Lithium Intercalation for Batteries.

Transition metal oxides (TMOs) as high-capacity electrodes have several drawbacks owing to their inherent poor electronic conductivity and structural instability during the multi-electron conversion reaction process. In this study, the authors use an intrinsic high-valent cation substitution approach to stabilize cation-deficient magnetite (Fe3 O4 ) and overcome the abovementioned issues. Herein, 5 at% of Mo4+ -ions are incorporated into the spinel structure to substitute octahedral Fe3+ -ions, featuring ≈1.7 at% cationic vacancies in the octahedral sites. This defective Fe2.93 ▫0.017 Mo0.053 O4 electrode shows significant improvements in the mitigation of capacity fade and the promotion of rate performance as compared to the pristine Fe3 O4 . Furthermore, physical-electrochemical analyses and theoretical calculations are performed to investigate the underlying mechanisms. In Fe2.93 ▫0.017 Mo0.053 O4 , the cationic vacancies provide active sites for storing Li+ and vacancy-mediated Li+ migration paths with lower energy barriers. The enlarged lattice and improved electronic conductivity induced by larger doped-Mo4+ yield this defective oxide capable of fast lithium intercalation. This is confirmed by a combined characterization including electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), galvanostatic intermittent titration technique (GITT) and density functional theory (DFT) calculation. This study provides a valuable strategy of vacancy-mediated reaction to intrinsically modulate the defective structure in TMOs for high-performance lithium-ion batteries.

Deterministic optical control of room temperature multiferroicity in BiFeO3 thin films.

Controlling ferroic orders (ferroelectricity, ferromagnetism and ferroelasticity) by optical methods is a significant challenge due to the large mismatch in energy scales between the order parameter coupling strengths and the incident photons. Here, we demonstrate an approach to manipulate multiple ferroic orders in an epitaxial mixed-phase BiFeO3 thin film at ambient temperature via laser illumination. Phase-field simulations indicate that a light-driven flexoelectric effect allows the targeted formation of ordered domains. We also achieved precise sequential laser writing and erasure of different domain patterns, which demonstrates a deterministic optical control of multiferroicity at room temperature. As ferroic orders directly influence susceptibility and conductivity in complex materials, our results not only shed light on the optical control of multiple functionalities, but also suggest possible developments for optoelectronics and related applications.

Successive Phase Transitions in Fe2+ Ladder Compounds Sr2Fe3Ch2O3 (Ch = S, Se).

Small single crystals of Sr2Fe3Ch2O3 (Ch = S, Se) have been synthesized by flux methods, and bulk materials have been obtained by solid state reactions. Both compounds are isostructural to the compound Sr2Co3S2O3 (space group Pbam), which contains a novel hybrid spin ladder: a combination of a 2-leg rectangular ladder and a necklace ladder. The 2-leg ladder acts as a well-defined magnetic entity, while intimate magnetic coupling to the necklace ladder induces three successive phase transitions in the range of 40-120 K in each composition (Ch = S or Se), as revealed by Mössbauer spectroscopy, thermodynamics, and magnetometry. The complex magnetic behaviors can be explained by the unique spin-lattice topology.

Three Oxidation States of Manganese in the Barium Hexaferrite BaFe12-xMnxO19.

The coexistence of three valence states of Mn ions, namely, +2, +3, and +4, in substituted magnetoplumbite-type BaFe12-xMnxO19 was observed by soft X-ray absorption spectroscopy at the Mn-L2,3 edge. We infer that the occurrence of multiple valence states of Mn situated in the pristine purely iron(III) compound BaFe12O19 is made possible by the fact that the charge disproportionation of Mn3+ into Mn2+ and Mn4+ requires less energy than that of Fe3+ into Fe2+ and Fe4+, related to the smaller effective Coulomb interaction of Mn3+ (d4) compared to Fe3+ (d5). The different chemical environments determine the location of the differently charged ions: with Mn3+ occupying positions with (distorted) octahedral local symmetry, Mn4+ ions prefer octahedrally coordinated sites in order to optimize their covalent bonding. Larger and more ionic bonded Mn2+ ions with a spherical charge distribution accumulate at tetrahedrally coordinated sites. Simulations of the experimental Mn-L2,3 XAS spectra of two different samples with x = 1.5 and x = 1.7 led to Mn2+:Mn3+:Mn4+ atomic ratios of 0.16:0.51:0.33 and 0.19:0.57:0.24.

Canted Antiferromagnetism on Rectangular Layers of Fe2+ in Polymorphic CaFeSeO.

From stoichiometric amounts of CaO, Fe, and Se, pure powders and single crystals of quaternary [Formula: see text] can be obtained by solid-state reaction and self-flux growth, respectively. The as-synthesized compound exhibits a polymorphic crystal structure, where the two modifications have different stacking sequences of [Formula: see text] layers. The two polymorphs have similar unit cells but different crystal symmetries (Cmc21 and Pnma), of which the former is non-centrosymmetric. Fe is divalent (d6) and high-spin, as proven by X-ray spectroscopy, Mössbauer spectroscopy, and powder neutron diffraction data. The latter two, in combination with magnetic susceptibility and specific heat data, reveal a long-range antiferromagnetic spin order (TN = 160 K) with a minor spin canting. CaFeSeO is an electronic insulator, as confirmed by resistivity measurements and density functional theory calculations. The latter also suggest a relatively small energy difference between the two polymorphs, explaining their intimate intergrowth.

[Cs6 Cl][Fe24 Se26 ]: A Host-Guest Compound with Unique Fe-Se Topology.

The novel host-guest compound [Cs6Cl][Fe24Se26] (I4/mmm; a=11.0991(9), c=22.143(2) Å) was obtained by reacting Cs2Se,CsCl, Fe, and Se in closed ampoules. This is the first member of a family of compounds with unique Fe-Se topology, which consists of edge-sharing, extended fused cubane [Fe8Se6Se8/3] blocks that host a guest complex ion, [Cs6Cl](5+). Thus Fe is tetrahedrally coordinated and divalent with strong exchange couplings, which results in an ordered antiferromagnetic state below TN =221 K. At low temperatures, a distribution of hyperfine fields in the Mössbauer spectra suggests a structural distortion or a complex spin structure. With its strong Fe-Se covalency, the compound is close to electronic itinerancy and is, therefore, prone to exhibit tunable properties.

Synthesis and Characterization of Ba[CoSO]: Magnetic Complexity in the Presence of Chalcogen Ordering.

Barium thio-oxocobaltate(II), Ba[CoS2/2 O2/2 ], was synthesized by the reaction of equimolar amounts of BaO, Co, and S in closed silica ampoules. The title compound (Cmcm, a=3.98808(3), b=12.75518(9), c=6.10697(4) Å) is isostructural to Ba[ZnSO]. The use of soft X-ray absorption spectroscopy confirmed that cobalt is in the oxidation state +2 and tetrahedrally coordinated. Its coordination consists of two sulfur and two oxygen atoms in an ordered fashion. High-temperature magnetic susceptibility data indicate strong low-dimensional spin-spin interactions, which are suggested to be closely related to the layer-type crystal structure and perhaps the ordered distribution of sulfur and oxygen. Antiferromagnetic ordering below TN =222 K is observed as an anomaly in the specific heat, coinciding with a significant lowering of the magnetic susceptibility. Density functional theory calculations within a generalized-gradient approximation (GGA)+U approach identify an antiferromagnetic ground state within the square-like two-dimensional layers of Co, and antiferromagnetic correlations for nearest and next nearest neighbors along bonds mediated by oxygen or sulfur. However, this magnetic state is subject to frustration by relatively strong interlayer couplings.

Ba3 v2 s4 o3 : a mott insulating frustrated quasi-one-dimensional s=1 magnet.

Through a solid-state reaction, a practically phase pure powder of Ba3 V2 S4 O3 was obtained. The crystal structure was confirmed by X-ray single-crystal and synchrotron X-ray powder diffraction (P63 , a=10.1620(2), c=5.93212(1) Å). X-ray absorption spectroscopy, in conjunction with multiplet calculations, clearly describes the vanadium in charge-disproportionated V(III) S6 and V(V) SO3 coordinations. The compound is shown to be a strongly correlated Mott insulator, which contradicts previous predictions. Magnetic and specific heat measurements suggest dominant antiferromagnetic spin interactions concomitant with a weak residual ferromagnetic component, and that intrinsic geometric frustration prevents long-range order from evolving.

Enhanced polarization switching characteristics of HfO2 ultrathin films via acceptor-donor co-doping.

In the realm of ferroelectric memories, HfO2-based ferroelectrics stand out because of their exceptional CMOS compatibility and scalability. Nevertheless, their switchable polarization and switching speed are not on par with those of perovskite ferroelectrics. It is widely acknowledged that defects play a crucial role in stabilizing the metastable polar phase of HfO2. Simultaneously, defects also pin the domain walls and impede the switching process, ultimately rendering the sluggish switching of HfO2. Herein, we present an effective strategy involving acceptor-donor co-doping to effectively tackle this dilemma. Remarkably enhanced ferroelectricity and the fastest switching process ever reported among HfO2 polar devices are observed in La3+-Ta5+ co-doped HfO2 ultrathin films. Moreover, robust macro-electrical characteristics of co-doped films persist even at a thickness as low as 3 nm, expanding potential applications of HfO2 in ultrathin devices. Our systematic investigations further demonstrate that synergistic effects of uniform microstructure and smaller switching barrier introduced by co-doping ensure the enhanced ferroelectricity and shortened switching time. The co-doping strategy offers an effective avenue to control the defect state and improve the ferroelectric properties of HfO2 films.

Spin polarized Fe1-Ti pairs for highly efficient electroreduction nitrate to ammonia.

Electrochemical nitrate reduction to ammonia offers an attractive solution to environmental sustainability and clean energy production but suffers from the sluggish *NO hydrogenation with the spin-state transitions. Herein, we report that the manipulation of oxygen vacancies can contrive spin-polarized Fe1-Ti pairs on monolithic titanium electrode that exhibits an attractive NH3 yield rate of 272,000 µg h-1 mgFe-1 and a high NH3 Faradic efficiency of 95.2% at -0.4 V vs. RHE, far superior to the counterpart with spin-depressed Fe1-Ti pairs (51000 µg h-1 mgFe-1) and the mostly reported electrocatalysts. The unpaired spin electrons of Fe and Ti atoms can effectively interact with the key intermediates, facilitating the *NO hydrogenation. Coupling a flow-through electrolyzer with a membrane-based NH3 recovery unit, the simultaneous nitrate reduction and NH3 recovery was realized. This work offers a pioneering strategy for manipulating spin polarization of electrocatalysts within pair sites for nitrate wastewater treatment.

Suppressing Structure Delamination for Enhanced Electrochemical Performance of Solid Oxide Cells.

Reversible solid oxide cells (rSOCs) have significant potential as efficient energy conversion and storage systems. Nevertheless, the practical application of their conventional air electrodes, such as La0.8Sr0.2MnO3-δ (LSM), Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF), and PrBa0.8Ca0.2Co2O5+δ (PBCC), remains unsatisfactory due to interface delamination during prolonged electrochemical operation. Using micro-focusing X-ray absorption spectroscopy (µ-XAS), a decrease (increase) in the co-valence state from the electrode surface to the electrode/electrolyte interface is observed, leading to the above delamination. Utilizing the one-pot method to incorporate an oxygen-vacancy-enriched CeO2 electrode into these air electrodes, the uniform distribution of the Co valence state is observed, alleviating the structural delamination. PBCC-CeO2 electrodes exhibited a degradation rate of 0.095 mV h-1 at 650 °C during a nearly 500-h test as compared with 0.907 mV h-1 observed during the 135-h test for PBCC. Additionally, a remarkable increase in electrolysis current density from 636 to 934 mA cm-2 under 1.3 V and a maximum power density from 912 to 989 mW cm-2 upon incorporating CeO2 into PBCC is also observed. BSCF-CeO2 and LSM-CeO2 also show enhanced electrochemical performance and prolonged stability as compared to BSCF and LSM. This work offers a strategy to mitigate the structural delamination of conventional electrodes to boost the performance of rSOCs.

High-energy all-solid-state lithium batteries enabled by Co-free LiNiO2 cathodes with robust outside-in structures.

A critical current challenge in the development of all-solid-state lithium batteries (ASSLBs) is reducing the cost of fabrication without compromising the performance. Here we report a sulfide ASSLB based on a high-energy, Co-free LiNiO2 cathode with a robust outside-in structure. This promising cathode is enabled by the high-pressure O2 synthesis and subsequent atomic layer deposition of a unique ultrathin LixAlyZnzOδ protective layer comprising a LixAlyZnzOδ surface coating region and an Al and Zn near-surface doping region. This high-quality artificial interphase enhances the structural stability and interfacial dynamics of the cathode as it mitigates the contact loss and continuous side reactions at the cathode/solid electrolyte interface. As a result, our ASSLBs exhibit a high areal capacity (4.65 mAh cm-2), a high specific cathode capacity (203 mAh g-1), superior cycling stability (92% capacity retention after 200 cycles) and a good rate capability (93 mAh g-1 at 2C). This work also offers mechanistic insights into how to break through the limitation of using expensive cathodes (for example, Co-based) and coatings (for example, Nb-, Ta-, La- or Zr-based) while still achieving a high-energy ASSLB performance.

Three-dimensional ultrafast charge-density-wave dynamics in CuTe.

Charge density waves (CDWs) involved with electronic and phononic subsystems simultaneously are a common quantum state in solid-state physics, especially in low-dimensional materials. However, CDW phase dynamics in various dimensions are yet to be studied, and their phase transition mechanism is currently moot. Here we show that using the distinct temperature evolution of orientation-dependent ultrafast electron and phonon dynamics, different dimensional CDW phases are verified in CuTe. When the temperature decreases, the shrinking of c-axis length accompanied with the appearance of interchain and interlayer interactions causes the quantum fluctuations (QF) of the CDW phase until 220 K. At T < 220 K, the CDWs on the different ab-planes are finally locked with each other in anti-phase to form a CDW phase along the c-axis. This study shows the dimension evolution of CDW phases in one CDW system and their stabilized mechanisms in different temperature regimes.

Origin of the Seriously Limited Anionic Redox Reaction of Li-Rich Cathodes in Sulfide All-Solid-State Batteries.

Li-rich layered oxide (LLO) cathode materials with mixed cationic and anionic redox reactions display much higher specific capacity than other traditional layered oxide materials. However, the practical specific capacity of LLO during the first cycle in sulfide all-solid-state lithium-ion batteries (ASSLBs) is extremely low. Herein, the capacity contribution of each redox reaction in LLO during the first charging process is qualitatively and quantitatively analyzed by comprehensive electrochemical and structural measurements. The results demonstrate that the cationic redox of the LiTMO2 (TM = Ni, Co, Mn) phase is almost complete, while the anionic redox of the Li2MnO3 phase is seriously limited due to the sluggish transport kinetics and severe LLO/Li6PS5Cl interface reaction at high voltage. Therefore, the poor intrinsic conductivity and interface stability during the anionic redox jointly restrict the capacity release or delithiation/lithiation degree of LLO during the first cycle in sulfide ASSLBs. This study reveals the origin of the seriously limited anionic redox reaction in LLO, providing valuable guidance for the bulk and interface design of high-energy-density ASSLBs.