Changes in periapical status, quality of root fillings and estimated endodontic treatment need in a similar urban German population 20 years later.

OBJECTIVES: The study aimed at assessing, as primary objective, the periapical status and quality of root fillings, and, as secondary objective, the endodontic treatment need of a German urban population in a cross-sectional study 20 years after the first one. MATERIALS AND METHODS: Clinical and radiographic data of 353 patients were evaluated. Descriptive and regression analyses were performed and the endodontic treatment need was calculated. Results were compared with data from the year 1993. RESULTS: A total of 9269 teeth were examined (26.2 teeth per patient; 1993, 24.4), of which 337 teeth were root filled (3.6%; 1993, 2.7%). Prevalence of apical periodontitis in root-filled teeth was 34% (1993, 61%). Quality of root fillings was adequate in 117 cases (35%; 1993, 14%). Minimum endodontic treatment need was estimated with 1.6% (1993, 2.3%), including teeth with clinical symptoms. Considering symptomless teeth with apical periodontitis and poor quality of root filling, the treatment need was 2.9% (1993, 3.7%). Regression analysis identified quality of root filling as a significant factor for periapical health (p = 0.01, odds ratio 3.4×, 95% CI 1.9-6.3×), likewise the type of instrumentation. Teeth treated with rotary files had a significantly better outcome (p = 0.02, odds ratio 2.0×, 95% CI 1.1-3.7×). CONCLUSIONS: Quality of root fillings and the periapical status have improved over the last 20 years in Germany. However, there is still a need for an increase in quality of root canal treatment.

Evaluation of the accuracy of nine electronic apex locators by using Micro-CT.

AIM: To determine the accuracy of locating the apical constriction using apex locators. METHODOLOGY: Extracted teeth were micro-CT scanned preoperatively to localize the apical constriction. Electronic length measurements of 91 root canals were made using nine electronic apex locators (EAL) connected to a mounting model. Distances from the major foramen were recorded at each scale bar of the EALs, and a file was fixed in the canal at a position indicated by each EAL to be the apical constriction. A second micro-CT scan was conducted, and distances from the file tip to constriction and major foramen were calculated for each EAL. The accuracy of EALs was determined with a tolerance of 0.1, 0.25, 0.5 and 1 mm, and the 95% confidence interval was used to compare the EALs. A rank analysis was performed in which measurements beyond the major foramen were considered as inaccurate. RESULTS: Regardless of the type of teeth, there was no significant difference in the accuracy of determining the apical constriction and major foramen between the nine EALs within a tolerance of ±0.5 mm and 1 mm, but there was a significant difference for the tolerances of ±0.1 and 0.25 mm. The highest ranks close to the constriction (98% and 94%) and to the major foramen (86% and 73%) were observed in Dentaport ZX and Elements Diagnostic Unit, respectively. Overestimation of working length beyond the major foramen was observed in all EALs (5% to 71%) when the scale for the major foramen, as recommended by the manufacturers, was used. However, when the scale for the constriction was used, only 3% of the measurements were beyond the major foramen. CONCLUSION: Electronic apex locators were able to determine the apical constriction. Using EALs to determine the major foramen led to overestimation of the working length. Therefore, it may be recommended to use the EAL scale of the constriction.

Validity of longitudinal sections for determining the apical constriction.

AIM: To validate the use of longitudinal sections against cross sections using micro-CT for disclosing the topography and location of the apical constriction. METHODOLOGY: Seventy extracted human teeth with 117 completely developed roots were micro-CT scanned and reconstructed at a voxel size of 27 µm. The 3DSlicer program was used to navigate the longitudinal sections parallel to the long axis of the canal and also to rotate and tilt the views. Each root canal was evaluated in both mesio-distal and bucco-lingual planes. Constriction topographies were identified as described in the literature. In each canal, the number of different topographies detected was recorded. Further, serial cross-sectional analysis of the apical portion of the canal was performed. Reconstructed plots of canal areas were assessed to locate the constriction and determine its form. A descriptive analysis of both longitudinal and cross section methods was conducted. In each canal, the frequency of constriction forms was calculated in the mesio-distal or bucco-lingual aspects and the 99% confidence interval was computed. RESULTS: When both aspects of the longitudinal sections were pooled, all root canals had two or more topographies and consequently different locations of the apical constriction. In contrast, cross-sectional analysis constantly yielded one constriction form per canal. CONCLUSION: Compared to cross-sectional analysis, longitudinal sections of the root canal conveyed inconsistent results regarding the topography and the location of the apical constriction.

Reliability of a Fluorescence-aided Identification Technique (FIT) for detecting tooth-colored restorations: an ex vivo comparative study.

OBJECTIVE: The aim of the study was to compare the diagnostic predictive values of a Fluorescence-aided Identification Technique (FIT) with those of the conventional diagnostic method regarding the identification of resin composite restorations. MATERIALS AND METHODS: Twenty examiners, 10 students, and 10 dentists were asked to identify composite restorations in a full-mouth model using both the FIT (405-nm light source) and the conventional method in combination with a common diagnostic light source. Each dental examination was repeated three times to calculate inter-/intra-operator agreement, repeatability, and reproducibility using kappa statistics. Predictive values were calculated using a filling prevalence of 42 % and the sensitivity and specificity of each method. Pearson's test and the 99 % confidence interval (CI) were used for comparison. RESULTS: The sensitivity (97 %, CI 94-99 %) and specificity (100 %, CI 98-100 %) of the FIT were significantly higher than those of the conventional method (27 %, CI 21-31 %, and 65 %, CI 58-72 %, respectively). Consequently, the positive (100 %) and negative (98 %) predictive values of the FIT were significantly higher than those of the conventional method (35 and 55 %, respectively). As expressed by the kappa statistics, the repeatability (0.96) and reproducibility (0.95) of the FIT were significantly better than those of the conventional method (0.49, CI 0.42-0.56, and 0.34, CI 0.26-0.43, respectively). CONCLUSION: Compared to the conventional technique, the FIT was significantly more reliable as shown by higher sensitivity, specificity, repeatability, and reproducibility values. CLINICAL RELEVANCE: The FIT should be considered as a reliable and practicable alternative in contrast to the conventional method, which was hardly sufficient as a diagnostic procedure.

Accuracy of endodontic working length determination using cone beam computed tomography.

AIM: To evaluate the accuracy of endodontic working length (WL) measurements by cone beam computed tomography (CBCT). METHODOLOGY: Forty-two extracted human teeth were placed into three full jaw models. Preoperatively, CBCT scans of the models were performed (voxel size: 0.2 mm). Endodontic access cavities were prepared, and the coronal third of 70 root canals were pre-flared. The real WL was measured by inserting a K-file into the root canal until the tip was visible at the foramen, a silicon stopper was adjusted to the corresponding cusp tip, and the length was measured using a micrometer. CBCT WL was simply measured by tracing a line between the apical foramen and the corresponding cusp tip. When the foramen and cusp tip were not visible in one plane, the measurement was taken in two planes. To quantify measurement error, real and CBCT WLs were repeated four times by two experienced operators. Paired analysis for each variable was performed, and the mean of absolute differences and the corresponding 99% confidence intervals were calculated. The t-test was used for comparison. RESULTS: The coefficient of repeatability, reproducibility and interoperator agreement were <0.5 mm. CBCT measurements were accurate; the mean of absolute differences between CBCT and real WL was 0.41 mm (99% CI 0.31-0.52 mm). CONCLUSION: Using a simplified method, CBCT images of 0.2 mm voxel size can be used to accurately determine endodontic WL.

Ultrasonic monitoring of the effect of sodium hypochlorite on the elasticity of dentine.

AIM: To determine the change in ultrasonic velocity of dentine after the application of 5% NaOCl. METHODOLOGY: Twenty standardized plano-parallel dentine bars were divided into two groups. Dentine bars were wetted on only one surface. The test group (n = 10) was irrigated with 5% NaOCl, and the control group, (n = 10) with saline. Ultrasonic velocities before and after irrigation were compared to determine the change in the modulus of elasticity. Finally, dentine bars were loaded until failure in a 3-point bending test. Paired t-test and the mean of differences were used to assess the statistical significance between the groups. RESULTS: The mean ultrasonic velocity decreased by 1.4% after the application of NaOCl; no change was observed for saline. The mean velocity reduction of 49 m s⁻¹ was found to be highly significant (P = 0.004). The ultrasonically derived modulus of elasticity decreased by 2.6% compared to the initial value of 17.8 GPa. However, the observed reduction in elasticity derived from the 3-point bending test was not significant (P = 0.238). CONCLUSIONS: NaOCl reduced the ultrasonic velocity of dentine and the ultrasonically derived modulus of elasticity.

Antimicrobial effectiveness of intracanal medicaments on Enterococcus faecalis: chlorhexidine versus octenidine.

AIM: To determine the viability of Enterococcus faecalis in infected human root dentine in vitro after exposure to root canal medicaments based on chlorhexidine and octenidine. METHODOLOGY: Human root segments (n = 40) were infected with E. faecalis for 8 weeks. Root dentine samples (rd) collected at week 4 served as individual baseline values. At week 8, the root segments were randomly divided into four test groups (n = 10 each) for the placement of one of the following medicaments in the root canals: calcium hydroxide paste (CH), chlorhexidine gel (CHX-gel) (5.0%), chlorhexidine/gutta-percha points (CHX-GP) (active points(®) ; Roeko, Langenau, Germany) and octenidine gel (OCT-gel) (5.0%) followed by incubation for 4 weeks. The effect on E. faecalis viability was assessed by two fluorescent dyes (syto 9/propidium iodide) to determine the 'proportion of viable bacteria' (PVB%) and number of 'colony-forming units' (CFU). Mean values and 95% confidence intervals (CI) were calculated for PVB% and log CFU, and the difference between groups was established. RESULTS: Viable and dead bacterial cells were detected in all 'rd' samples at weeks 4 and 8. The treatment with CHX-gel, CHX-GP and OCT-gel resulted in significantly lower PVB% values with 15.4%, 3.5% and 0%, respectively. No growth (CFU) was recorded for these samples at week 12. When medicated by CH, the PVB% was increased without a corresponding change in CFUs. CONCLUSIONS: In contrast to calcium hydroxide, both CHX - and octenidine-based intracanal medicaments were effective in decreasing the viability of E. faecalis. OCT showed the most favourable results and may have potential as an endodontic medicament.

Influence of cusp coverage on the fracture resistance of premolars with endodontic access cavities.

AIM: To assess the influence of cusp reduction and coverage with composite resin on the fracture resistance of premolars with prepared access cavities. METHODOLOGY: Endodontic access cavities were prepared in 60 premolar teeth that were divided into four test groups: R1, R2, R3 and NR (n=15). In all test groups, MOD cavities were prepared and extended towards one of the cusps. The remaining cusp-wall thickness was: 1-1.5 mm in R1, 1.5-2 mm in R2 and 2-3 mm in both R3 and NR groups. In addition, in group R1, R2 and R3 the same cusp was reduced in height to 3.5 mm. Cuspal coverage and MOD restorations were performed using composite resin. Ten intact premolars served as positive controls and another ten MOD-prepared unrestored premolars as negative controls. Teeth were submitted to cyclic fatigue of 1.2 million cycles. A compressive load was applied 30° to the long axis of the teeth until fracture. Fracture loads were recorded and the means and the Confidence Intervals were compared. RESULTS: The mean fracture resistance of each of the cusp-reduced groups R1, R2 and R3 (603, 712 and 697 N, respectively) was significantly higher than the non-reduced cusp group (305 N) and was comparable to the intact-premolar group (653 N). CONCLUSIONS: Cusp reduction and coverage with composite resin significantly increased the fracture resistance of premolar teeth with MOD and endodontic access cavities.

A tactile method for canal length determination in teeth with open apices.

AIM: To present a tactile method for working length determination in teeth with open apices and to determine its accuracy and repeatability. METHODOLOGY: Ninety teeth with 129 root canals were prepared to create open apices. The correct working length (CWL) for each canal was determined by introducing a file into the root canal until it was visible at the apex. Consequently, the tactile working length (TWL) was determined by the 'Tactile Method' using a K-file that was bent at the tip. Two operators repeated the measurement once in each root canal. The accuracy of the TWL was determined by comparing the TWL with the CWL. The mean of the absolute differences and the corresponding 99% confidence interval (CI) were calculated. Both the repeatability and inter-operator agreement of the tactile method were determined by performing paired analysis of the differences between repeated measurements and the two operators. RESULTS: Overall, 97% (CI: 91-99) of the TWL were within 0.5 mm from the CWL, the mean of absolute differences was 0.1 mm (CI: 0.1-0.2). The maximum difference between repeated measurements was 0.2 mm and between the two operators was 0.6 mm. CONCLUSIONS: The tactile method may provide an accurate determination of canal length in teeth with open apices.

[Suggestion for a classification of odontalgias]. / Vorschlag einer Klassifikation der Odontalgien.

BACKGROUND: Toothache prevalence in the overall population is considerable. However, for clinical purposes, the classification schemes available do not appear to be sufficiently sophisticated. Moreover, not all known forms of dental pain are considered. A refined classification that meets current standards is therefore introduced. To facilitate diagnosis, the characteristic features of the various types of odontalgia are summarized. RESULTS: The new classification differentiates among seven different origins of pain: 1. dentinal pain (originating from the pulpal tissues), 2. pulpal pain (originating from the pulpal tissues), 3. periodontal pain, 4. alveolar-osseous pain, 5. atypical odontalgia, 6. heterotopic dental pain, 7. odontalgia associated with primary psychosocial factors. CONCLUSIONS: In our opinion, the proposed classification differentiates among the different forms of odontalgia more precisely than all previous ones. However, its viability and advantages over other available classification schemes still need to be verified in daily practice.

Efficacy of rotary instruments with greater taper in preparing oval root canals.

AIM: To compare the preparation quality of two rotary systems and NiTi-hand files in oval root canals, and to evaluate the effect of canal dimensions on the preparation. METHODOLOGY: Ninety roots with oval root canals were selected. The middle third was cross sectioned at two levels and photographed. The maximum and minimum diameters of the root and canal were recorded. Teeth were distributed in three groups (n = 30) using stratified randomization, and prepared under simulated clinical conditions with Mtwo, ProTaper, or NiTi-hand files. The pre- and post-preparation photographs were traced and superimposed, the thickness of dentine removed was measured and the ratio of prepared canal outline was calculated. The impact of preparation system and canal dimensions on the quality of the preparation was evaluated using regression analysis. RESULTS: With regards to the ratio of prepared canal outline, no statistical significant difference was found between Mtwo (0.75 [95%CI: 0.69; 0.81]) and ProTaper (0.75 [95%CI: 0.69; 0.80]), but both systems performed significantly better than NiTi-hand files (0.65 [95%CI: 0.60; 0.71]). In six root canals in Mtwo-group (20%), and eight root canals in ProTaper-group (27%), the minimal thickness of dentine-wall after preparation was less than 0.5 mm. In contrast to the maximum diameter of the root canal, the minimum diameter influenced the quality of the preparation (P = 0.0006). CONCLUSIONS: No instrumentation technique was able to circumferentially prepare the oval outline of root canals. Nevertheless, instruments with greater taper (ProTaper and Mtwo) were more efficient than NiTi- hand files, but this was, in some cases, at the expense of remaining dentine-wall thickness.

Effect of various types of sodium perborate on the pH of bleaching agents.

Time-dependent changes in the pH value of various types of sodium perborate solutions used as bleaching agents were evaluated. Sodium perborate-monohydrate (MH), sodium perborate-trihydrate (TRH), and sodium perborate-tetrahydrate are available. Each perborate was mixed with 10%, 15%, or 30% fresh hydrogen peroxide or with bidistilled water in a powder to liquid ratio of 2 g:1 ml, respectively. The pH values were recorded at baseline and after 1h, 1 day, 3 days, and 7 days, respectively. At baseline the pH values of MH, TRH, and tetrahydrate in conjunction with 30% H2O2 were 8.7, 7.0, and 7.5, respectively. The pH increased significantly with decreasing concentrations of H2O2. For TRH, MH, and tetrahydrate mixed with bidistilled water more alkaline values were measured at baseline and after 1 h. Due to solidification of the samples, the pH could not be determined for MH starting day 1 and for TRH starting day 3. In conclusion, the pH of bleaching pastes depends on the content of water of crystallization in sodium perborate, H2O2 concentration, and time of measurement. The bulk of the mixtures recorded reached alkaline pH values of 10 to 11. It is recommended that the pH of the mixture being used be checked to avoid potential postbleaching root resorption.

In vitro comparison of various types of sodium perborate used for intracoronal bleaching of discolored teeth.

Fifty-eight extracted incisors were artificially stained to compare the efficacy of sodium perborate preparations used for intracoronal bleaching. All teeth were bleached for a 6-day period and the bleaching pastes replaced at days 1 and 3 (walking bleach technique). Sodium perborate-monohydrate, trihydrate, or tetrahydrate in conjunction with 30% H2O2 as well as tetrahydrate, either mixed with H2O or prepared as an experimental gel, were placed intracoronally at a level of 1-mm below the vestibular cementoenamel junction. Standardized slides were used to evaluate the color changes during bleaching. Success rates between 46 and 77% could be achieved, but no significant differences in final bleaching results between any of the sodium perborate types were observed. The use of the experimental gel resulted in comparable esthetic results (54%), although the portion of tetrahydrate in the gel was lower than that of the other preparations. In contrast to general recommendations that bleaching agents be left for 3 to 7 days in the access cavity before replacement, shorter bleaching intervals did not seem to affect the success.

Frequency of overinstrumentation with an acceptable radiographic working length.

The aim of this in vitro study was to determine how frequent a seemingly accurate working length ending radiographically 0 to 2 mm short of the radiographic apex resulted in an instrumentation beyond the apical foramen. Under simulated clinical conditions working lengths of 169 root canals were radiographically determined in 91 extracted teeth. In all cases the measuring files adjusted to the final working length (Iwork) were located 0 to 2 mm short of the radiographic apex. Iwork was subsequently compared with the actual reference length (Iref) representing the distance between the apical foramen and the coronal reference. Instrumentation beyond the apical foramen (Iwork > ref) occurred in premolars in 51% (95% confidence interval: 36%; 66%) of the cases, in molars in 22% (95% confidence interval: 14%; 30%), and in anterior teeth in no case. These results suggest that in premolars and molars a radiographically working length ending 0 to 2 mm short of the radiographic apex provides, more often than expected, a basis for unintentional overinstrumentation.

Evaluation of success and failure after endodontic therapy using a glass ionomer cement sealer.

The purpose of this multicenter, prospective clinical study was to assess the treatment results following endodontic therapy using a glass ionomer cement sealer (Ketac-Endo) and to relate the results to various clinical factors. A total of 486 teeth were treated by three operators, using the "standardized technique" for canal preparation and either single cone or laterally condensed gutta-percha, in one or multiple treatment sessions. Six to 18 months postoperatively, the treatment results were assessed clinically and radiographically, and related to preoperative, intraoperative, and postoperative factors using a chi 2 analysis with 5% level of significance. Of 378 followed-up teeth, there was a 78.3% success, 15.6% incomplete healing, and 6.1% failure. Statistically, differences in the results were related to the number of canals (p < 0.04), primary treatment and retreatment (p < 0.02), pulp vitality (p < 0.001), periapical lesion (p < 0.001), preoperative symptoms (p < 0.003), operative complications (p < 0.001), and absence of restoration (p < 0.03). It was concluded that these treatment results were compatible with those reported in previous studies, and supported the clinical use of Ketac-Endo as an acceptable endodontic sealer.

An in vitro comparison of two modern apex locators.

Two apex locators were compared regarding their ability to accurately locate the apical constriction in the presence of various canal fluids at different meter readings. Forty-one root canals were filled with 1% NaOCl, 3% H2O2, and 0.9% NaCl, respectively. Electronic working length (EWL) measurements were recorded with the apex locators Root ZX (meter readings: "Apex", "0.5", and "1") and Apit (meter readings: "Apex" and "3"). The deviation of the EWL from the apical constriction was determined. The proportion of measurements within +/- 0.5 mm of the apical constriction ranged between 0.76 and 0.85 for Root ZX at the meter readings "Apex" and "0.5," regardless of the canal contents. Apit consistently displayed shorter measurement values than Root ZX and reached the highest proportions at the meter reading "Apex": 0.59 (1% NaOCl), 0.61 (3% H2O2), and 0.68 (0.9% NaCl). In the presence of NaOCl, Root ZX provides the more accurate EWL measurements at the meter reading "0.5" and "Apex."

Quantitative radiographic follow-up of apical surgery: a radiometric and histologic correlation.

The objective of this study was to establish an objective method for evaluating the treatment outcome of apical periodontitis (AP). AP was induced in the mandibular premolars of beagle dogs and apicoectomies were performed with retrofilling. Standardized periapical radiographs were taken immediately after completion of treatment and at 6 months. Ten pairs of standardized radiographs of 33 treated roots were analyzed. Radiographs were digitized and subtracted after warping and gamma correction. Areas of AP and adjacent normal areas (N) in digitized original and subtraction images were analyzed using eight radiometric computations. These computations were compared with subjective histologic evaluation and objective quantitative histomorphometry of the periapical condition at 6 months. The average gray value for AP on the subtraction images was found to have significant correlation with both objective (multiple regression p < 0.01) and subjective histology (logistic regression p < 0.01). Digital subtraction may be a useful tool in endodontic apical surgery assessment.

Healing of apical periodontitis in dogs after apicoectomy and retrofilling with various filling materials.

OBJECTIVE: To histologically assess the efficacy of various retrofilling materials in apical surgery. STUDY DESIGN: The pulps of mandibular premolars in seven beagle dogs were infected; this resulted in periapical lesions. Apical surgery was performed without disinfection of the root canals. Super EBA (Harry J. Bosworth Co., Skokie, III.), two formulations of glass ionomer cement, amalgam with varnish, IRM,(Caulk Co., Ltd., Densply International, Milford, Del.) and a light-cured composite resin were the retrofilling materials used. Roots infected and apicoectomized without retrofilling were positive controls. After 6 months the dogs were killed. The experimental roots and surrounding apical tissues were prepared and histologically examined and relative percentages of bone and inflammation were calculated. RESULTS: Super EBA was consistently the best. In overall periapical condition, Super EBA was statistically superior to all materials except IRM. IRM was superior to the glass ionomer cements but not the other materials. As to percentage of bone, Super EBA was the best overall; it was superior to glass ionomer, composite resin, and the positive control but not different from amalgam or IRM. When comparing remaining numbers of inflammatory cells, Super EBA was superior with the lowest number of inflammatory cells present. CONCLUSION: Although not statistically different from IRM, Super EBA was consistently the best retrofilling material tested when compared with all retrofilling materials studied.

Microstructure and strength analysis of ultrasonically shaped ceramics.

In this study, the influence of a new ultrasonic shaping procedure on the surface quality, microstructure, bending strength and fatigue behaviour of a feldspathic porcelain was investigated. A total of 120 standardized (ISO 6872) autoglazed, ground, lapped and ultrasonically machined porcelain test bars were analyzed. Another 24 equiformat experimental alumina ceramics, which were ultrasonically machined, as well as 24 nontreated fload glass specimen served as controls. It could be shown that the porcelain removal process with diamond grinding wheels yielded a rough surface microrelief and lead to structural subsurface damage, decreasing bending strength and fatigue behaviour. In contrast, ultrasonic shaping resulted in a smoother surface and prevented damage to the subsurface layer of the machined brittle porcelain, although, the smoothest surfaces were achieved by lapping. Both bending strength and fatigue behaviour of the conventional dental porcelain were increased by ultrasonic machining. However, the fracture toughness of the experimental alumina was substantially higher and was not subjected to a decrease in fatigue.