One-pot Formulation of Cationic Oligochitosan Coated Nanoparticles via Photo- Polymerization Induced Self-Assembly.

During last few decades, oligochitosan (OCS)-coated nanoparticles have received great interest for nanomedicine, food and environment applications. However, their current formulation techniques are time-consuming with multi-synthesis/purification steps and sometimes require the use of organic solvents, crosslinkers and surfactants. Herein, we report a facile and rapid one-pot synthesis of OCS-based nanoparticles using photo-initiated reversible addition fragmentation chain transfer polymerization-induced self-assembly (Photo-RAFT PISA) under UV-irradiation at room temperature. To achieve this, OCS was first functionalized by a chain transfer agent (CTA) resulting in a macromolecular chain transfer agent (OCS-CTA), which will act as a reactive electrostatic/steric stabilizer. Owing to its UV-sensitivity, OCS-CTA was then used as photo-iniferter to initiate the polymerization of 2-hydroxypropyl methacrylate (HPMA) in aqueous acidic buffer, resulting in OCS-g-PHPMA amphiphilic grafted copolymers which self-assemble into nano-objects. Transmission electron microscopy and light scattering analysis reveal formation of spherical nanostructures.

Biosourced Polymeric Emulsifiers for Miniemulsion Copolymerization of Myrcene and Styrene: Toward Biobased Waterborne Latex as Pickering Emulsion Stabilizer.

Biobased waterborne latexes were synthesized by miniemulsion radical copolymerization of a biosourced ß-myrcene (My) terpenic monomer and styrene (S). Biobased amphiphilic copolymers were designed to act as stabilizers of the initial monomer droplets and the polymer colloids dispersed in the water phase. Two types of hydrophilic polymer backbones were hydrophobically modified by terpene molecules to synthesize two series of amphiphilic copolymers with various degrees of substitution. The first series consists of poly(acrylic acid) modified with tetrahydrogeraniol moieties (PAA-g-THG) and the second series is based on the polysaccharide carboxymethylpullulan amino-functionalized with dihydromyrcenol moieties (CMP-g-(NH-DHM)). The produced waterborne latexes with diameters between 160 and 300 nm and were composed of polymers with varying glass transition temperatures (Tg, PMy = -60 °C, Tg, P(My-co-S) = -14 °C, Tg, PS = 105 °C) depending on the molar fraction of biobased ß-myrcene (fMy,0 = 0, 0.43, or 1). The latexes successfully stabilized dodecane-in-water and water-in-dodecane emulsions for months at all compositions. The waterborne latexes composed of low Tg poly(ß-myrcene) caused interesting different behavior during drying of the emulsions compared to polystyrene latexes.

Insight into Factors Influencing Wound Healing Using Phosphorylated Cellulose-Filled-Chitosan Nanocomposite Films.

Marine polysaccharides are believed to be promising wound-dressing nanomaterials because of their biocompatibility, antibacterial and hemostatic activity, and ability to easily shape into transparent films, hydrogels, and porous foams that can provide a moist micro-environment and adsorb exudates. Current efforts are firmly focused on the preparation of novel polysaccharide-derived nanomaterials functionalized with chemical objects to meet the mechanical and biological requirements of ideal wound healing systems. In this contribution, we investigated the characteristics of six different cellulose-filled chitosan transparent films as potential factors that could help to accelerate wound healing. Both microcrystalline and nano-sized cellulose, as well as native and phosphorylated cellulose, were used as fillers to simultaneously elucidate the roles of size and functionalization. The assessment of their influences on hemostatic properties indicated that the tested nanocomposites shorten clotting times by affecting both the extrinsic and intrinsic pathways of the blood coagulation system. We also showed that all biocomposites have antioxidant capacity. Moreover, the cytotoxicity and genotoxicity of the materials against two cell lines, human BJ fibroblasts and human KERTr keratinocytes, was investigated. The nature of the cellulose used as a filler was found to influence their cytotoxicity at a relatively low level. Potential mechanisms of cytotoxicity were also investigated; only one (phosphorylated microcellulose-filled chitosan films) of the compounds tested produced reactive oxygen species (ROS) to a small extent, and some films reduced the level of ROS, probably due to their antioxidant properties. The transmembrane mitochondrial potential was very slightly lowered. These biocompatible films showed no genotoxicity, and very importantly for wound healing, most of them significantly accelerated migration of both fibroblasts and keratinocytes.

Tuning Charge Storage Properties of Supercapacitive Electrodes Evidenced by In Situ Gravimetric and Viscoelastic Explorations.

Revealed by an integrated electrogravimetric and viscoelastic method, slightly electrochemically reduced graphene oxide (ERGO) presents an anion preference for charge storage and delivery, while with the progressive removal of oxygen functionalities on its basal planes, cations begin to predominate in charge compensation. This "anion-to-cation" evolution in neutral aqueous media can not only affect the electrochemical charge storage, but also play an important role in electrode's viscoelasticity. It was demonstrated that oxygen functionalities could modify the interactions between graphene layers and even contribute to pseudocapacitances. However, the role of oxygen functionalities in species transfer and viscoelastic variations still remains poorly understood. Herein, a combined methodology of electrochemical quartz crystal microbalance (EQCM), ac-electrogravimetry and electroacoustic impedance measurements was proposed for characterizing the electrochemical and viscoelastic responses of graphene oxides with various degree of electrochemical reduction. With the removal of oxygen containing functional groups, ERGO electrode exhibits ( i) a gradually enhanced specific capacitance ( Cs) with increased flexibility (decreased storage moduli, G'); ( ii) a dehydration process of cations (i.e., from Na+·2H2O to Na+·H2O); and ( iii) a potential-dependent "stiffened-softened" behavior. These results open the door for a suitable design of GO-based materials for electrochemical energy storage and shed light on electronic devices where ion-selective behavior plays a key role.

Gas-phase infrared spectra of three compounds of astrochemical interest: vinyl, allenyl, and propargyl isocyanides.

Isocyanides, isomers of the cyanides detected in the interstellar medium, are also possible components of this medium. The infrared spectra (5000-500 cm(-1) ) of gaseous vinyl isocyanide, allenyl isocyanide, and propargyl isocyanide have been recorded at 0.1 cm(-1) resolution. When prepared on a gram scale to produce a partial pressure of 10 mbar after evaporation in the cell, these three isocyanides, which have previously been reported to be kinetically unstable, do not display any sign of decomposition when recording the spectra. Geometry optimizations and harmonic and anharmonic vibrational frequencies were calculated using the LCCSD(T) method with the cc-pVTZ basis set. Anharmonic frequencies of fundamental, overtone, and combination transitions were calculated using a variational approach implemented in the P Anhar.v2.0 code, to assign the experimental data for each compound. These results improve our knowledge of these under-investigated compounds and pave the way for other physicochemical studies on functionalized isocyanides.

Development of calcium phosphate-chitosan composites with improved removal capacity toward tetracycline antibiotic: Adsorption and electrokinetic properties.

Two eco-friendly and highly efficient adsorbents, namely brushite-chitosan (DCPD-CS), and monetite-chitosan (DCPA-CS) composites were synthesized via a simple and low-cost method and used for tetracycline (TTC) removal. The removal behavior of TTC onto the composite particles was studied considering various parameters, including contact time, pollutant concentration, and pH. The maximum TTC adsorption capacity was 138.56 and 112.48 mg/g for the DCPD-CS and DCPA-CS, respectively. Increasing the pH to 11 significantly enhanced the adsorption capacity to 223.84 mg/g for DCPD-CS and 205.92 mg/g for DCPA-CS. The antibiotic adsorption process was well-fitted by the pseudo-second-order kinetic and Langmuir isotherm models. Electrostatic attractions, complexation, and hydrogen bonding are the main mechanisms governing the TTC removal process. Desorption tests demonstrated that the (NH4)2HPO4 solution was the most effective desorbing agent. The developed composites were more efficient than DCPD and DCPA reference samples and could be used as valuable adsorbents of TTC from contaminated wastewater.

Rhodium/Trialkylamines Catalyzed Reductive Hydroformylation in Ionic Liquid/Heptane Medium: An Unexpected Concept for Catalyst Recycling in Batch and Continuous Flow Processes.

We report here the rhodium catalyzed reductive hydroformylation of methyl 10-undecenoate. Our approach is based on an ionic liquid/heptane biphasic system associated with commercially available trialkylamines. The effects of various reaction parameters such as amine type, amine amount, temperature, syngas pressure and composition were studied in order to minimize the rhodium leaching and increase the production of primary alcohols. Although the amine is less soluble in the ionic liquid than in heptane, the catalytic system is efficiently maintained in the ionic liquid phase. For the optimized conditions, the catalytic ionic liquid layer can be recycled at least nine times by keeping an alcohol yield over 50% and by limiting the rhodium leaching. As an extension of this system and to examine the long-term stability, this batch system was transferred to a miniplant for a continuous flow process. A pilot plant was operated for 45 h of total reaction time, reaching a TTON of 232 for alcohol production.

An optimized sono-heterogeneous Fenton degradation of olive-oil mill wastewater organic matter by new magnetic glutarlaldehyde-crosslinked developed cellulose.

The present study highlights the olive mill wastewater (OMW) treatment characteristics through a sono-heterogeneous Fenton process using new designed [GTA-(PDA-g-DAC) @Fe3O4] and characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), magnetic properties measurements, and point of zero charge (pH pzc) analysis. A preliminary removal study showed significant degradation efficiency (75%) occurred combining the magnetic synthesized catalyst [GTA-(PDA-g-DAC)@Fe3O4] ([catalyst] = 2 g/L) with US /H2O2 and maintaining 500WL-1 ultrasonic power (US). The values obtained by US only were (13%), H2O2/US (18%), US/Fe3O4 (28%), and US /Fe3O4/H2O2(35%). The catalytic findings have shown that [GTA-(PDA-g-DAC)@Fe3O4] exhibited good properties for OMW compound's degradation. The sonocatalytic process coupling and extra oxidant addition resulted in the degradation substantial levels. For instance, the concomitant effect of degradation optimized parameters; H2O2 10 mM, [GTA-(PDA-g-DAC) @Fe3O4] nanocomposites 2.5 g/L, at pH 3, and T 35 °C for 70 min resulted in an almost complete mineralization of aqueous OMW solution followed by a significant decolorization. Oxidation results exhibited efficient degradation rates in total phenolic compounds (TPC), total amino compounds (TAC), and chemical oxygen demand (COD) oxidation rate were 89.88, 92.75, and 95.66 respectively following the optimized sono-heterogeneous catalytic Fenton process. The prepared magnetic catalyst exhibited a good stability during repeated cycles. The gathered findings gave the evidence that sono-heterogeneous catalytic Fenton process is a promising treatment technology for OMW effluents.

Recent Progress of Non-Isocyanate Polyurethane Foam and Their Challenges.

Polyurethane foams (PUFs) are a significant group of polymeric foam materials. Thanks to their outstanding mechanical, chemical, and physical properties, they are implemented successfully in a wide range of applications. Conventionally, PUFs are obtained in polyaddition reactions between polyols, diisoycyanate, and water to get a CO2 foaming agent. The toxicity of isocyanate has attracted considerable attention from both scientists and industry professionals to explore cleaner synthesis routes for polyurethanes excluding the use of isocyanate. The polyaddition of cyclic carbonates (CCs) and polyfunctional amines in the presence of an external blowing agent or by self-blowing appears to be the most promising route to substitute the conventional PUFs process and to produce isocyanate-free polyurethane foams (NIPUFs). Especially for polyhydroxyurethane foams (PHUFs), the use of a blowing agent is essential to regenerate the gas responsible for the creation of the cells that are the basis of the foam. In this review, we report on the use of different blowing agents, such as Poly(methylhydrogensiloxane) (PHMS) and liquid fluorohydrocarbons for the preparation of NIPUFs. Furthermore, the preparation of NIPUFs using the self-blowing technique to produce gas without external blowing agents is assessed. Finally, various biologically derived NIPUFs are presented, including self-blown NIPUFs and NIPUFs with an external blowing agent.

Synthesis of Novel Non-Isocyanate Polyurethane/Functionalized Boron Nitride Composites.

Poly(hydroxyurethanes) (PHUs) have been suggested as isocyanate-free, low-toxicity alternatives to polyurethanes (PUs). However, PHUs present low mechanical properties due to the presence of side reactions that limit the production of high-molar mass polymers. Here, we present the synthesis under mild conditions and atmospheric pressure of bi-cyclic carbonate monomer for the production of PHU nanocomposites with good physical properties. The kinetics of the bi-cyclic carbonate synthesis and its complete conversion to urethane were followed by FTIR. The addition of functionalized boron nitrate (f-BN) with sucrose crystals improved the thermal degradation temperature as well as the glass transition by approximately 20 °C and 10 °C, respectively. The storage modulus of PHU films gradually increases with the concentration of f-BN in the composite.

New ternary water-soluble support from self-assembly of ß-cyclodextrin-ionic liquid and an anionic polymer for a dialysis device.

We developed a new hybrid material resulting from an innovative supramolecular tripartite association between an ionic liquid covalently immobilized on primary ß-cyclodextrins rim and an anionic water-soluble polymer. Two hydrophilic ternary complexes based on native and permethylated ß-cyclodextrins substituted with an ionic liquid and immobilized on poly(styrene sulfonate) (CD-IL+PSS- and CD(OMe)IL+PSS-) were obtained by simple dialysis with a cyclodextrin maximal grafting rate of 25% and 20% on the polymer, respectively. These polyelectrolytes are based on electrostatic interactions between the opposite charges of the imidazolium cation of the ionic liquid and the poly(styrene sulfonate) anion. The inclusion properties of the free cavities of the cyclodextrins and the synergic effect of the polymeric matrix were studied with three reference guests such as phenolphthalein, p-nitrophenol, and 2-anilinonaphthalene-6-sulfonic acid using UV-visible, fluorescent, and NMR spectroscopies. The support has been applied successfully in dialysis device to extract and concentrated aromatic model molecule. This simple and flexible synthetic strategy opens the way to new hybrid materials useful for fast and low-cost ecofriendly extraction techniques relevant for green analytical chemistry.

The benefits of combining 1D and 3D nanofillers in a piezocomposite nanogenerator for biomechanical energy harvesting.

Mechanical energy harvesting using piezoelectric nanogenerators (PNGs) offers an attractive solution for driving low-power portable devices and self-powered electronic systems. Here, we designed an eco-friendly and flexible piezocomposite nanogenerator (c-PNG) based on H2(Zr0.1Ti0.9)3O7 nanowires (HZTO-nw) and Ba0.85Ca0.15Zr0.10Ti0.90O3 multipods (BCZT-mp) as fillers and polylactic acid (PLA) as a biodegradable polymer matrix. The effects of the applied stress amplitude, frequency and pressing duration on the electric outputs in the piezocomposite nanogenerator (c-PNG) device were investigated by simultaneous recording of the mechanical input and the electrical outputs. The fabricated c-PNG shows a maximum output voltage, current and volumetric power density of 11.5 V, 0.6 µA and 9.2 mW cm-3, respectively, under cyclic finger imparting. A high-pressure sensitivity of 0.86 V kPa-1 (equivalent to 3.6 V N-1) and fast response time of 45 ms were obtained in the dynamic pressure sensing. Besides this, the c-PNG demonstrates high-stability and durability of the electrical outputs for around three months, and can drive commercial electronics (charging capacitor, glowing light-emitting diodes and powering a calculator). Multi-physics simulations indicate that the presence of BCZT-mp is crucial in enhancing the piezoelectric response of the c-PNG. Accordingly, this work reveals that combining 1D and 3D fillers in a polymer composite-based PNG could be beneficial in improving the mechanical energy harvesting performances in flexible piezoelectric nanogenerators for application in electronic skin and wearable devices.

Use of Novel Non-Toxic Bismuth Catalyst for the Preparation of Flexible Polyurethane Foam.

Foam products are one of the largest markets for polyurethane (PU) and are heavily used in many sectors. However, current PU formulations use highly toxic and environmentally unfriendly production processes. Meanwhile, the increasing environmental concerns and regulations are intensifying the research into green and non-toxic products. In this study, we synthesized flexible polyurethane foam (PUF) using different weight percentages (0.025%, 0.05% and 0.1%) of a non-toxic bismuth catalyst. The bismuth-catalyzed foams presented a well evolved cellular structure with an open cell morphology. The properties of the bismuth-catalyzed flexible PUF, such as the mechanical, morphological, kinetic and thermal behaviors, were optimized and compared with a conventional tin-catalyzed PUF. The bismuth-catalyst revealed a higher isocyanate conversion efficiency than the stannous octoate catalyst. When comparing samples with similar densities, the bismuth-catalyzed foams present better mechanical behavior than the tin-catalyzed sample with similar thermal stability. The high solubility of bismuth triflate in water, together with its high Lewis acidity, have been shown to benefit the production of PU foams.

Formulation and characterization of hydroxyapatite-based composite with enhanced compressive strength and controlled antibiotic release.

A composite based on hydroxyapatite (HA) and chitosan (CS) combined with ciprofloxacin (CIP) was formulated by the solid-liquid mixing method. The optimization of the solid to the liquid ratio and the use of chitosan in a small amount (≤5 wt%) promoted the preparation of stable and rigid monoliths. A synergistic effect of CS and CIP contents on the compressive strength of the CIP-loaded composite was evidenced. The compressive strength of the fabricated biocomposite ranged in values from 1 to 6 MPa, comparable to those reported for cancellous bone. The improvement of the mechanical properties with the increase of the rate of organic components was correlated with the diminution of the surface area and the reduction in the pore volume of the specimens. On the other hand, the in vitro release experiments of the antibiotic indicated a sustained and controlled release of CIP over 10 days. Moreover, in vitro antibacterial tests performed on the biocomposite HA-CS5-CIP showed significant inhibition of Staphylococcus aureus and Escherichia coli pathogens. According to the showed results, the formulated composite with three-phase components could be a promising material for bone repair and local antibiotic release for the treatment of bone infections.

Functionalization of developed bacterial cellulose with magnetite nanoparticles for nanobiotechnology and nanomedicine applications.

This paper deals with the preparation of novel magnetic materials made from tetraaza macrocyclic Schiff base bacterial cellulose ligands with magnetite nanoparticles (Fe3O4NPs) through a multi-step procedure for antimicrobial and cytotoxic activities and chemotherapy in cancer treatment. First, the 2,3-dialdehyde bacterial cellulose (DABC) was chemically modified by ethylenediamine (EDA) and benzil (Bzl) in the presence of ferrous ions. Then, the magnetite nanoparticles (Fe3O4NPs) was produced inside the complex [Fe(DABC-EDA-Bzl)Cl2] through a co-precipitation method. In nanobiotechnology, the magnetic [Fe3O4NP-INS-(DABC-EDA-Bzl)] material was showed moderate antimicrobial and cytotoxic activities against different species and cells, respectively. In particular, the magnetic [Fe3O4NP-INS-(DABC-EDA-Bzl)] material have not any cytotoxic activity towards peripheral blood mononucleocyte (PBMC) cells. Anti-tumor studies demonstrated that the magnetic [Fe3O4NP-INS-(DABC-EDA-Bzl)] material effectively inhibits the growth of the CT26 tumor model in BALB/c mice compared with other resulting materials throughout the experimental period and can be effective drug delivery in nanomedicine.

Phosphorus pentoxide as a cost-effective, metal-free catalyst for ring opening polymerization of ε-caprolactone.

The ring-opening polymerization (ROP) of ε-caprolactone (ε-CL) using phosphorus pentoxide (P2O5) as a metal-free catalyst and isopropanol (iPrOH) as initiator resulted in the preparation of poly(ε-caprolactone) with narrow weight distribution. NMR spectroscopy analyses of the prepared PCL indicated the presence of the initiator residue at the end of the polymer chain, implying the occurrence of the ε-CL-catalysis ROP through a monomer activation mechanism. Kinetic experiments confirmed the controlled/living nature of ε-CL ring-opening catalyzed by phosphorus pentoxide. The commercial availability of phosphorus pentoxide and its easy-handling provide additional opportunities for polymer synthesis and nanocomposite manufacturing.

The relationship of structure, thermal and water vapor permeability barrier properties of poly(butylene succinate)/organomodified beidellite clay bionanocomposites prepared by in situ polycondensation.

The exploitation of beidellite clay (BDT), used as a nanofiller in the preparation of poly(butylene succinate) (PBS)/organoclay biodegradable nanocomposites, was investigated. A series of bionanocomposites with various loadings of the organoclay (3CTA-BDT) were prepared by in situ polycondensation reaction between succinic anhydride (SuAh) and 1,4-butanediol (1,4-BD) at atmospheric pressure in refluxing decalin with azeotropic removal of water, and the reaction was catalyzed by non-toxic bismuth chloride (BiCl3). X-ray diffraction (XRD) and scanning electron microscopy (SEM) results showed that 3CTA-BDT was likely exfoliated and well dispersed in PBS matrix. Thermal properties (TGA, DSC and thermal conductivity), contact angle measurements and water vapor sorption behavior of the corresponding nanocomposites were also discussed. Compared to pure PBS, a significant reduction of the diffusion coefficient and the water vapor permeability (WVP) by 44 and 37%, respectively, was observed by adding only 5 wt% of 3CTA-BDT. These results could make these bionanocomposites suitable materials for food packaging application.

Sustainable coating material based on chitosan-clay composite and paraffin wax for slow-release DAP fertilizer.

The coating of fertilizers by polymers is one of the most efficient tools for their slow and control release into soil. This strategy avoids excessive use of the fertilizers and increases their availability to the crops needs. In the present paper, hydro-soluble diammonium phosphates (DAP) fertilizer was double coated following the dip-coating process by chitosan-clay composites as inner coating and paraffin wax as an outer coating. The chitosan composite preparation and characterization were deeply investigated. The montmorillonite (MMT) clay incorporation as filler improves the water barrier diffusion, mechanical properties, and thermal stability of the composite. The combination of the swelling behavior of the chitosan-clay composite (inner coating) and the hydrophobic property of paraffin wax (outer coating) was confirmed by the water holding capacity evaluation and the phosphorus release essays in water and soil. Indeed, the phosphorus dissolution from the coated DAP granules was significantly delayed compared to the uncoated DAP. Moreover, the biodegradation study of composite material in soil and the biochemical oxygen demand (BOD) tests revealed that the coating system proposed could be considered as a carbon source for microorganisms after the fertilization process, which confirms its sustainability.

Thermally-stable high energy storage performances and large electrocaloric effect over a broad temperature span in lead-free BCZT ceramic.

Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) relaxor ferroelectric ceramics exhibit enhanced energy storage and electrocaloric performances due to their excellent dielectric and ferroelectric properties. In this study, the temperature-dependence of the structural and dielectric properties, as well as the field and temperature-dependence of the energy storage and the electrocaloric properties in BCZT ceramics elaborated at low-temperature hydrothermal processing are investigated. X-ray diffraction and Raman spectroscopy results confirmed the ferroelectric-paraelectric phase transition in the BCZT ceramic. At room temperature and 1 kHz, the dielectric constant and dielectric loss reached 5000 and 0.029, respectively. The BCZT ceramic showed a large recovered energy density (W rec) of 414.1 mJ cm-3 at 380 K, with an energy efficiency of 78.6%, and high thermal-stability of W rec of 3.9% in the temperature range of 340-400 K. The electrocaloric effect in BCZT was explored via an indirect approach following the Maxwell relation at 60 kV cm-1. The significant electrocaloric temperature change of 1.479 K at 367 K, a broad temperature span of 87 K, an enhanced refrigerant capacity of 140.33 J kg-1, and a high coefficient of performance of 6.12 obtained at 60 kV cm-1 make BCZT ceramics potentially useful coolant materials in the development of future eco-friendly solid-state refrigeration technology.

Sugar end-capped poly-D,L-lactides as excipients in oral sustained release tablets.

Sugar end-capped poly-D,L-lactide (SPDLA) polymers were investigated as a potential release controlling excipient in oral sustained release matrix tablets. The SPDLA polymers were obtained by a catalytic ring-opening polymerization technique using methyl alpha-D-gluco-pyranoside as a multifunctional initiator in the polymerization. Polymers of different molecular weights were synthesized by varying molar ratios of monomer/catalyst. The matrix tablets were prepared by direct compression technique from the binary mixtures of SPDLA and microcrystalline cellulose, and theophylline was used as a model drug. The tablet matrices showed in vitro reproducible drug release profiles with a zero-order or diffusion-based kinetic depending on the SPDLA polymer grade used. Further release from the tablet matrices was dependent on the molecular weight of the SPDLA polymer applied. The drug release was the fastest with the lowest molecular weight SPDLA grade, and the drug release followed zero-order rate. With the higher molecular weight SPDLAs, more prolonged dissolution profiles for the matrix tablets (up to 8-10 h) were obtained. Furthermore, the prolonged drug release was independent of the pH of the dissolution media. In conclusion, SPDLAs are a novel type of drug carrier polymers applicable in oral controlled drug delivery systems.