E-waste management, treatment options and the impact of heavy metal extraction from e-waste on human health: Scenario in Vietnam and other countries.

Ho Chi Minh (HCM) City is the most important urban region of Vietnam, Southeast Asia. In recent times, the quantity of electronic waste (e-waste) has been growing by several thousand tonnes every year. In this research, some of the existing and developing technologies being employed for the recycling of e-waste have been reviewed. Accordingly, the paper has been divided into three sections namely, e-waste treatment technologies in Ho Chi Minh City, the effect of heavy metals on human health and the extraction of metals from e-waste using pyrolysis, hydrometallurgy, bioleaching, mechanical, and air classifier methods, respectively. The extraction of precious metals and heavy metals such as Cd, Cr, Pb, Hg, Cu, Se, and Zn from e-waste can be hazardous to human health. For example, lead causes hazards to the central and peripheral nervous systems, blood system and kidneys; copper causes liver damage; chronic exposure to cadmium ends up causing lung cancer and kidney damage, and mercury can cause brain damage. Thus, this study examines the key findings of many research and review articles published in the field of e-waste management and the health impacts of metal pollution.

Multi-pollutants (organic and inorganic) removal potential of scenedesmus species on municipal sewage water and analyzed their phycoremediation mechanisms.

Municipal sledge water is a combination of residential wastewater, industrial effluent, and precipitation water. The water quality parameters analyses results demonstrated that most of the parameters (pH: 5.6 ± 0.3, Turbidity: 102.31 ± 2.8 mg L-1, TH: 946.38 ± 3.7 mg L-1, BOD: 295.63 ± 5.4 mg L-1, COD: 482.41 ± 4.9 mg L-1, Ca: 278.74 ± 1.8 mg L-1, SO42-: 559.64 ± 11.4 mg L-1, Cd: 18.56 ± 1.37 mg L-1, Cr: 31.25 ± 1.49 mg L-1, Pb: 21.45 ± 1.12 mg L-1, and Zn: 48.65 ± 1.56 mg L-1) were considerably increased in quantities with slightly acidic in condition. The in-vitro phycoremediation study was carried out for two weeks with pre-identified Scenedesmus sp. Biomass in different groups of treatments (A, B, C, and D). Interestingly, most of the physicochemical parameters were significantly reduced in group C (4 × 103 cells mL-1) treated municipal sludge water in a shorter treatment period than in the other treatment groups. The phycoremediation percentage of group C were found as pH: 32.85%, EC: 52.81%, TDS: 31.32%, TH: 25.58%, BOD: 34.02%, COD: 26.47%, Ni: 58.94%, Ca: 44.75%, K: 42.74%, Mg: 39.52%, Na: 36.55%, Fe: 68%, Cl: 37.03%, SO42-: 16.77%, PO43-: 43.15%, F: 55.55%, Cd:44.88%, Cr:37.21%, Pb:43.8%, and Zn:33.17%. These findings suggest that increased biomass from Scenedesmus sp. can be used to significantly remediate municipal sludge water and that the obtained biomass and treated sludge can be used as feedstock's for bio fuel as well as bio fertilizer, respectively.

Phytoremediation proficiency of Jatropha gossypifolia under the influence of Pseudomonas aeruginosa on metal contaminated soil.

This investigation was performed to evaluate the metal pollution and possible phytoremediation on bauxite mine surrounding farmland soil. The quality analysis results revealed that, the soil has been polluted with metals such as Al (13.25 ± 0.54 mg kg-1), Pb (336.18 ± 7.17 mg kg-1), Zn (382.18 ± 3.05 mg kg-1), and Cd (11.32 ± 0.28 mg kg-1) and possess poor essential element content. The test bacterium Pseudomonas aeroginosa showed considerable metal tolerance up to 100 mg kg-1 concentration of metals such as Al, Pb, Zn, and Cd. Besides that, it also possesses essential plant growth promoting traits such as sederophore, IAA, nitrogen fixation, and phosphate solubilization. The test bacterium P. aeroginosa demonstrated optimistic influence on the growth and phytoremediation ability of Jatropha gossypifolia on metal-polluted soil under greenhouse experiment with different treatment groups (I-V). Group I (J. gossypifolia seeds coated with P. aeroginosa) showed outstanding phytoremediation potential on metal polluted soil than other treatment groups. The group I reduced considerable quantity of metals (Al 42.79%, Pb 36.57%, Zn 47.06%, and Cd 39.57%) from the treated soil. It was significantly higher than the remediation potential of other treatment groups (II-V). These findings suggest that P. aeroginosa's metal tolerant and PGP characters can effectively influence the growth and phytoremediation potential of J. gossypifolia on metal polluted soil.

Biosorption potential of viable and dead Aspergillus flavus biomass on polluted pond water.

The State Industries Promotion Corporation of Tamil Nadu Ltd (SIPCOT) Lake is never dry; it is always full of water and was recently used as a waste reservoir by the native peoples and industrialists. Thus, this investigation was performed to assess the quality of the lake water and evaluate the possible biosorption potential of Aspergillus flavus on this lake water sample through batch model biosorption study. The water quality parameters analyses revealed that the lake water has been polluted with number of contaminates which including organic and inorganic. The most of the parameters such as pH (9.5 ± 0.7), turbidity (38 ± 1.1 NT unit), TDS (2350.12 ± 31.24 mg L-1), BOD (40.21 ± 3.27 mg L-1), and COD (278.61 ± 11.84 mg L-1), Ca (212.85 ± 9.64 mg L-1), Fe (3.1 ± 0.8 mg L-1), NH3 (15.62 ± 0.5 mg L-1), NO3-(5.84 ± 0.14 mg L-1), Cl- (1257.85 ± 4.6 mg L-1),Cd (15.64 ± 0.29 mg L-1), Cr (6.86 ± 0.34 mg L-1), Pb (25.61 ± 3.41 mg L-1), and Hg (1.8 ± 0.024 mg L-1) content of water sample were beyond the acceptable limits. Fortunately, the A. flavus dead biomass showed considerable biosorption potential (Cd: 27.5 ± 1.1%, Cr: 13.48 ± 1.2%, Pb: 21.27 ± 1.5%, and Hg: 6.49 ± 0.86% in 180 min of contact time) than viable form on polluted lake water. Since, reduced the quantities of most of the parameters which beyond the permissible limit and also increased remarkable percentage of DO in the water sample in a short period of contact time. These findings suggest that A. flavus dead biomass can be used for bioremediation of polluted water in a sustainable manner.

Unravelling the potential plant growth activity of halotolerant Bacillus licheniformis NJ04 isolated from soil and its possible use as a green bioinoculant on Solanum lycopersicum L.

Immensely expanding world population and narrowing arable land for agriculture is a mighty concern faced by the planet at present. One of the major reasons for decline in arable lands is the increased soil salinity, making it unfavourable for crop cultivation. Utilisation of these saline land for agriculture is possible with suitable invention for improving the soil quality. Biofertizers manufactured out of Plant Growth Promoting Rhizobacteria is one such innovation. In the present study, Bacillus licheniformis NJ04 strain was isolated and studied for its halotolerance and other effective plant growth promoting traits. The NJ04 strain was able to tolerate salt up to 10% and highlighted remarkable antifungal activity against common fungal phytopathogens. The preliminary seed germination test in Solanum lycopersicum seeds revealed a significant increase in root length (16.29 ± 0.91 cm) and shoot length (9.66 ± 0.11 cm) of treated plants as compared with the control plants and thereby shows its possible use as a green bioinoculant in agriculture and an ideal candidate to compete with salt stress.

Utilisation of persistent chemical pollutant incorporating with nanoparticles to modify the properties of geopolymer and cement concrete.

The majority of industrial products are identified as persistent organic pollutants after their date of expiry, which is highly harmful to the ecosystem and human health and also going to be banned around the world. Paint latex is one of those pollutants which become a hazardous waste material after stocking for a long time. Approximately 20% of color paints do not get used for their desired purpose after getting sold out and end up in a landfill. Now a day's construction industry is inclining towards the various types of geo-polymer concrete since it does not require cement. But that geo-polymer concrete has too much less workability as compared to the same grade of control cement concrete. To achieve the desired workability as well as other properties of geo-polymer concrete by using waste paint latex as performance improving admixture is the main motive of the present research. Fourteen different mixes of control and calcined clay-based geo-polymer concrete have been prepared by adding up to 3% waste paint latex of weight of cementitious materials and a detailed study has been done on various properties such as workability, rheology, shrinkage, strength and its microstructure. The presence of nanoparticles of TiO2 in waste paint latex has helped to produce extra hydration products, by which the mechanical properties, durability and microstructure of both traditional and geo-polymer concrete have increased. It has been concluded that a higher dose of waste paint latex improves the workability but the strength and durability properties of traditional and geo-polymer concrete improve up to 2-2.5% of waste paint latex replaced to water.

Characterization of NiONPs synthesized by aqueous extract of orange fruit waste and assessed their antimicrobial and antioxidant potential.

This research was performed to evaluate the nickel oxide nanoparticles (NiONPs) fabricating potential of orange fruit waste (OFW) aqueous extract. Moreover characterize the synthesized OFW-NiONPs through standard techniques such as UV-vis. spectrophotometer, Fourier-transform infrared spectroscopy (FTIR), dynamic light scattering (DLS) and Scanning Electron Microscope (SEM) analyses. Furthermore, the antimicrobial and antioxidant potential of OFW-NiONPs were studied against most common microbial pathogens (Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Klebsiella pneumoniae, and Aspergillus niger) and free radicals (2,2-diphenyl-1-picrylhydrazyl (DPPH), H2O2, OH, and FRAP). A sharp absorbance peak was obtained at 324 nm under UV-vis spectrum analysis that confirmed that the synthesis of OFW-NiONPs and it has been capped and stabilized by numbers of active functional groups studied through FTIR analysis. SEM and DLS analyses revealed that the cubic and triangle shaped OFW-NiONPs with the size intensity distribution was ranging from 21 nm to 130 nm. Interestingly, the OFW-NiONPs showed remarkable antimicrobial activity against the common microbial pathogens in the order of E. coli > A. niger > K. pneumoniae > B. subtilis > S. aureus at increased concentration of 200 µg mL-1. Similarly, the synthesized OFW-NiONPs also possess significant free radicals scavenging activity against DPPH, OH, and FRAP. These results conclude that this OFW-NiONPs can be considered for some biomedical applications after the investigations of some in-vivo research.

Role of chicken fat waste and hydrogen energy ratio as the potential alternate fuel with nano-additives: Insights into resources and atmospheric remediation process.

The main focus of the study was to witness the effects of chicken waste-based biodiesel blends along with constant hydrogen injection in a modified diesel engine. Furthermore, the nanoparticle multiwall carbon nanotubes (MWCNT) effects on the engine efficiency were also examined. A series of tests was conducted in the single cylinder, water cooled engine fuelled with diesel, CB100N, CB10N, CB30N, and CB50N. Throughout the entire run, constant hydrogen injection of 5 LPM has been maintained. The parameters such as brake thermal efficiency, brake specific fuel consumption, heat release rate and the emissions of different pollutants were determined for a variety of engine speeds. ASTM standards were applied to measure the viscosity, density and calorific value. From the reported findings, it was clear that the addition of the chicken waste biodiesel could be a sustainable substitute for the existing fossil fuels. Although the emission of the pollutants was dropped significantly, there was a massive drop in the BTE values. To compensate such shortage of power, the biodiesel was dispersed with MWCNT at the concentration of 80 ppm. Compared to the regular biodiesel, MWCNT inclusion increased the BTE by 14%. Further, the consumption of the fuel was also reduced marginally. Considering the pollutants, the catalytic activity of the MWCNT reduced the emissions of CO, NOx, and HC at various engine speeds. Besides, 10% reduction in NOx had been reported at lower engine speeds and was reduced to 8% at higher speed regimes. Compiling all together, increasing the concentration of the biodiesel blends obviously reduced the performance values and however, there was a great advantage in terms of the emission magnitudes irrespective of the engine operating conditions.

Anti-diabetic efficacy and selective inhibition of methyl glyoxal, intervention with biogenic Zinc oxide nanoparticle.

Non-enzymatic glycation of biomolecules results in advanced glycation end products (AGEs), which are responsible for secondary complications in diabetes. Inhibiting methyl glyoxal (MGO) induced advanced glycation end product (AGE) formation is the only way to alleviate diabetic complications. This study aimed to look into the abilities of herbal extract Kigelia africana and K. africana synthesized zinc oxide nanoparticles (ZnONPs) to inhibit the emergence of MG-derived AGEs. The study intended to determine antioxidant and AGE inhibition of the plant extract and ZnONPs. ZnONPs were tested for the efficiency of anti-diabetic activity in streptozotocin-induced diabetic Wister rats. We discovered that the MGO-trapping effects on the prevention of AGE production were mediated by the downregulation of the amplification of MGO-trapping impacts on the hypoglycemic and antihyperlipidemic mechanisms of ZnONPs. According to histological findings, the treatment with ZnONPs also successfully lowers inflammation in the hepatic and renal tissues. Overall, future mechanistic research could establish ZnONPs potential anti-diabetic properties.

Synthesis, characterization and anticancer activity of the green-synthesized hematite nanoparticles.

The conventional synthesis of hematite nanoparticles (HNPs) is expensive and creates secondary contaminants. Therefore, to combat these issues, there is a requirement for a cheap, effective, and eco-friendly technique. Herein, HNPs were prepared using the fruit extract of Spondias pinnata - an abundant source available in Western-coastal India. The polyphenolic compounds aided the synthesis process and the entire procedure was very rapid. The obtained HNPs had needle-like morphology with agglomerations due to the magnetic interactions as seen in FESEM and HRTEM images. Fe and O elements were noticed in EDS results. The crystalline nature and crystal phase were confirmed from XRD and SAED patterns. The lattice parameters of HNPs were in tandem with the literature. Fe-O crystalline vibrations were noticed in FTIR studies. VSM results portrayed the superparamagnetic nature of HNPs with a high magnetic saturation value of 8.949 emu/g and a negligible hysteresis loop. Thermal stability was ascertained using TGA results with 32% overall weight loss. XPS studies revealed the existence of pure HNPs with signature peaks. Raman spectrum showed the bands specific for HNPs, comparable to the commercial one. In addition, the HNPs were mesoporous with a high surface area (72.04 m2/g) - higher than the commercial one. The anticancer potential of the HNPs was successfully demonstrated against two mammalian cancer cell lines. Therefore, the HNPs synthesized in this study could be applied in various biomedical fields, especially for anticancer formulations.

Fungi fabrication, characterization, and anticancer activity of silver nanoparticles using metals resistant Aspergillus niger.

The purpose of this study was to assess the bio-fabrication possibilities of pre-isolated (from bauxite mine tailings) metal-tolerant Aspergillus niger biomass filtrate and the anticancer potential of synthesized silver nanoparticles (AgNPs) tested with a Human Cervical cancer cell line (HeLa cells: Henrietta Lacks cells). The nitrate reduction test demonstrated that A. niger has the ability to reduce nitrate, and filtrate derived from A. niger biomass efficiently fabricated AgNPs from AgNO3, as demonstrated by a visible color change from pale greenish to brownish. The UV-visible spectroscopy analysis revealed an absorbance peak at 435 nm, which corresponded to the AgNPs. These AgNPs have been capped and stabilized with several functional groups related to various bioactive molecules such as aldehyde, benzene rings, aldehydic, amines, alcohols, and carbonyl stretch protein molecules. Fourier-Transform Infrared Spectroscopy (FTIR) analysis confirmed the capping and stabilizing chemical bonding pattern. Scanning Electron Microscopy (SEM) revealed that the synthesized AgNPs were spherical, with an average size of 21.38 nm. This bio-fabricated AgNPs has in-vitro anticancer potential when tested against the HeLa cell line due to its potential size and shape. At 100 g mL-1 concentrations of this bio-fabricated AgNPs, the anticancer activity percentage was found to be 70.2%, and the IC50 value was found to be 66.32 g m-1. These findings demonstrated that the metal-tolerant A. niger cell filtrate could produce AgNPs with anticancer potential.

Microwave assisted biodiesel production from chicken feather meal oil using Bio-Nano Calcium oxide derived from chicken egg shell.

Environmental concerns have initiated the search for greener measures to mitigate pollution issues. Bio Nano CaO was synthesized by reducing CaO extracted from chicken egg shell using tea decoction. The synthesized material was characterized by physico-chemical techniques such as XRD, TGA, BET surface area analyser, TGA and SEM techniques. XRD studied confirmed the crystalline nature of material. The prepared material was found to be stable till 450 οC from TGA study. The SEM pictures displayed uniform and discrete particles which portrays the high probable sites that maximises the catalytic activity. The optimization of microwave assisted Biodiesel synthesis from chicken feather oil through Transesterification process using the bio-synthesized catalytic material was the main aim of the study. A 500 W microwave irradiation of Chicken feather meal oil using 8:1 Methanol:Oil input, 1% Bio Nano CaO concentration, 5 min of reaction time resulted in 95% conversion of chicken feather meal oil into chicken feather meal methyl esters. The Biodiesel was showed low viscosity (4.15 mm2/s), high heating value (50 MJ/kg), high flash point (153οC), reasonable pour point (12 οC) and good cetane number (50 min). The future works will be concentrated on the engine studies related to Torque, fuel consumption, emission data by using the synthesized Biodiesel.

Fabrication, characterization, anti-inflammatory, and anti-diabetic activity of silver nanoparticles synthesized from Azadirachta indica kernel aqueous extract.

The Azadirachta indica is an excellent and pharmaceutically valuable phytochemicals enriched traditional medicinal plant. The purpose of the research was to assess the ability of A. indica aqueous kernel extract to synthesize silver nanoparticles as well as their anti-inflammatory and anti-diabetic activity in vitro. The obtained results state that the aqueous kernel extract of A. indica can fabricate the silver nanoparticles and be confirmed by standard analytical techniques. Under UV-visible spectrophotometer analysis, the absorbance peak was found at 430 nm was related to the surface plasmon resonance of silver nanoparticles. The FTIR (Fourier-transform infrared spectroscopy) analysis revealed that numbers of functional groups belong to the pharmaceutically valuable phytochemicals, which act as reducing, capping, and stabilizing agent on silver nanoparticles synthesis. The size and shape of the silver nanoparticles were examined as 19.27-22.15 nm and spherical in shape. Interestingly, this kernel fabricated silver nanoparticles possess a reasonable anti-inflammatory (69.77%) and anti-diabetic (73.5%) activity at 100 µg mL-1 and these were partially comparable with standards (anti-inflammatory: 81.15%; anti-diabetic: 87.9%). Thus, the aqueous kernel extract fabricated silver nanoparticles can be considered for further in-vivo study to assess the practical possibility to promote as a pharmaceutical agent.

Synthesis of hydroxyapatite nanoparticles using Acacia falcata leaf extract and study of their anti-cancerous activity against cancerous mammalian cell lines.

This study deals with the synthesis of hydroxyapatite nanoparticles (HAPnps) mediated by Acacia falcata leaf extract. Aggregates of needle-shaped crystalline nanostructures were confirmed by FE-SEM and TEM analysis. Well-defined rings in the SAED patterns corroborated the polycrystalline nature of the HAPnps. Individual elements present in the HAPnps were attested by the specific signals for Ca, P, and O in the EDS and XPS analyses. The distinct peaks observed in the XRD spectrum matched well with the HAP hexagonal patterns with a mean crystallite size of 55.04 nm. The FTIR study unveiled the coating of the nanoparticles with the biomolecules from Acacia falcata leaves. The suspension HAPnps exhibited polydispersity (0.446) and remarkable stability (zeta potential: - 31.9 mV) as evident from DLS studies. The pore diameter was 25.7 nm as obtained from BET analysis, suggesting their mesoporous nature. The HAPnps showed the cytotoxic effect on A549 lung and MDA-MB231 breast carcinoma cell lines, with an IC50 value of 55 µg/mL. The distortion of the cell membrane and cell morphology, along with the chromatin condensation and cell necrosis on treatment with HAPnps were detected under fluorescence microscopy post acridine orange/ethidium bromide dye staining. This study reports the anti-cancerous potential of non-drug-loaded plant-mediated HAPnps. Therefore, the HAPnps obtained in this investigation could play a vital role in the biomedical field of cancer therapy.

Plant resistance to disease: Using biochar to inhibit harmful microbes and absorb nutrients.

Phytosanitary concerns are part of today's agricultural environment. The use of chemicals to treat plant diseases is both a source of pollution and allows pathogens to become resistant. Additionally, it can improve the chemical, physical, and biological properties of soil. Therefore, the soil environment is more conducive to healthy plant growth. By improving the chemical, physical, and biological attributes of soil, biochar can enhance plant resistance. Agricultural success has been attributed to biochar's acidic pH, which promotes beneficial soil microorganisms and increases soil nutrients; it is also porous, which provides a home and protects soil microorganisms. By improving soil properties, biochar becomes even more effective at controlling pathogens. The article also discusses the benefits of biochar for managing pathogens in agricultural soils. In addition, we examine several research papers that discuss the use of biochar as a method of combating soil-related pathogens and plant diseases. Biochar can be used to combat soil-borne diseases and other conditions.

A perspective on the interaction between biochar and soil microbes: A way to regain soil eminence.

Soil ecosystem imparts a fundamental role in the growth and survival of the living creatures. The interaction between living and non-living constituents of the environment is important for the regulation of life in the ecosystem. Biochar is a carbon rich product present in the soil that is responsible for various applications in diversified fields. In this review, we focused on the collaboration between the soil, biochar and microbial community present in the soil and consequences of it in the ecosystem. Herein, it primarily discusses on the different approaches of the production and characterization of biochar. Furthermore, this review also discusses about the optimistic interaction of biochar with soil microbes and their role in plant growth. Eventually, it reveals the various physio-chemical properties of biochar, including its specific surface area, porous nature, ion exchange capacity, and pH, which aid in the modification of the soil environment. Furthermore, it elaborately discloses the impact of the biochar addition in the soil focusing mainly on its interaction with microbial communities such as bacteria and fungi. The physicochemical properties of biochar significantly interact with microbes and improve the beneficial microbes growth and increase soil nutrients, which resulting reasonable plant growth. The main focus remains on the role of biochar-soil microbiota in remediation of pollutants, soil amendment and inhibition of pathogenicity among plants by promoting resistance potential. It highlights the fact that adding biochar to soil modulates the soil microbial community by increasing soil fertility, paving the way for its use in farming, and pollutant removal.

An assessment of biochar as a potential amendment to enhance plant nutrient uptake.

In a desperate attempt to find organic alternatives to synthetic fertilizers, agricultural scientists are increasingly using biochar as a soil amendment. Using chemical fertilizers results in enormous financial burdens and chronic health problems for plants and soils. Global concerns have also increased over the prolonged consumption of foods grown with artificial fertilizers and growth promotors. This adversely affects the environment and the welfare of humans, animals, and other living organisms. This way, organic biofertilizers have established a sustainable farming system. In such a context, biochar is gaining much attention among scientists as it may improve the overall performance of plants; in particular, crops have been optimistically cultivated with the addition of various sources. Field experiments have been conducted with multiple plant-based biochars and animal manure-based biochar. Plants receive different essential nutrients from biochar due to their physicochemical properties. Despite extensive research on biochar's effects on plant growth, yield, and development, it is still unknown how biochar promotes such benefits. Plant performance is affected by many factors in response to biochar amendment, but biochar's effect on nutrient uptake is not widely investigated. We attempted this review by examining how biochar affects nutrient uptake in various crop plants based on its amendment, nutrient composition, and physicochemical and biological properties. A greater understanding and optimization of biochar-plant nutrient interactions will be possible due to this study.

Comparison of three different structures of zeolites prepared by template-free hydrothermal method and its CO2 adsorption properties.

In this study, zeolite sodalite SOD (50NaO2:Al2O3:5SiO2), zeolite LTA (2NaO2:Al2O3:1.926SiO2) and zeolite FAU (16NaO2:Al2O3:4SiO2) of different structures were synthesized successfully through simple conventional hydrothermal crystallization technique without using any template agent. Morphological analysis of three different types of zeolites revealed that the samples exhibit three different shapes such as the "Raspberry-like", "Dice" cube like and "Octahedral" shaped morphology respectively. The thermal stability was found to be about 4.8%, 14.6% and 20.5% for the synthesized zeolites SOD, LTA and FAU respectively. From the N2 adsorption-desorption studies, it was observed that adsorption types IV and I correspond to the synthesized samples. CO2 adsorption by the synthesized zeolite SOD, LTA and FAU were examined in the pressure range from 0 to 101.325 kPa at a constant temperature of 297.15 K. The highest adsorption capacity of 3.7 mmol/g was obtained for zeolite FAU. The synthesized zeolite was studied using a nonlinear regression curve fit to determine the adsorption isotherm model using Langmuir and Freundlich isotherm model. It has been found that the synthesized zeolites have a large electric field gradient due to which they can strongly adsorb quadrupole of CO2 molecules.

A review on optimistic development of polymeric nanocomposite membrane on environmental remediation.

Current health and environmental concerns about the abundance and drawbacks of municipal wastewater as well as industrial effluent have prompted the development of novel and innovative treatment processes. A global shortage of clean water poses significant challenges to the survival of all life forms. For the removal of both biodegradable and non-biodegradable harmful wastes/pollutants from water, sophisticated wastewater treatment technologies are required. Polymer membrane technology is critical to overcoming this major challenge. Polymer matrix-based nanocomposite membranes are among the most popular in polymer membrane technology in terms of convenience. These membranes and their major components are environmentally friendly, energy efficient, cost effective, operationally versatile, and feasible. This review provides an overview of the drawbacks as well as promising developments in polymer membrane and nanocomposite membranes for environmental remediation, with a focus on wastewater treatment. Additionally, the advantages of nanocomposite membranes such as stability, antimicrobial properties, and adsorption processes have been discussed. The goal of this review was to summarize the remediation of harmful pollutants from water and wastewater/effluent using polymer matrix-based nanocomposite membrane technology, and to highlight its shortcomings and future prospects.

Evaluation of cadmium tolerance and remediated efficacy of wild and mutated Enterobacter species isolated from potassium nitrate (KNO3) processing unit contaminated soil.

The purpose of this study was to find the most cadmium (Cd2+) tolerant and remediated bacteria isolate from KNO3 processing unit contaminated soil. One isolate out of 19 isolates possessed excellent Cd2+ tolerance than others, which was recognized as Enterobacter hormaechei SFC3 through molecular characterization (16S rRNA sequencing). The identified E. hormaechei SFC3 contained 55% and 45% of GC and AT content, respectively. The wild and acridine orange mutated E. hormaechei SFC3 exhibited excellent resistance to Cd2+ up to the concentration of 1500 µg mL-1. Furthermore, the wild E. hormaechei SFC3 and mutated E. hormaechei SFC3 showed 82.47% and 90.21% of Cd2+ remediation on 6th days of treatment respectively. Similarly, the Cd2+ tolerant wild and mutated E. hormaechei SFC3 showed considerable resistance to all the tested antibiotics. The findings indicate that E. hormaechei SFC3 isolated from KNO3 processing unit contaminated soil is a promising candidate for microbial remediation of Cd2+ contamination.