RESUMO
Layered magnets are stand-out materials because of their range of functional properties that can be controlled by external stimuli. Regretfully, the class of such compounds is rather narrow, prompting the search for new members. Graphitizationâstabilization of layered graphitic structures in the 2D limitâis being discussed for cubic materials. We suggest the phenomenon to extend beyond cubic structures; it can be employed as a viable route to a variety of layered materials. Here, the idea of graphitization is put into practice to produce a new layered magnet, GdAlSi. The honeycomb material, based on graphene-like layers AlSi, is studied both experimentally and theoretically. Epitaxial films of GdAlSi are synthesized on silicon; the critical thickness for the stability of the layered polymorph is around 20 monolayers. Notably, the layered polymorph of GdAlSi demonstrates ferromagnetism, in contrast to the nonlayered, tetragonal polymorph. The ferromagnetism is further supported by electron transport measurements revealing negative magnetoresistance and the anomalous Hall effect. The results show that graphitization can be a powerful tool in the design of functional layered materials.
RESUMO
Free-standing few-layered MoSe2 nanosheet stacks optoelectronic signatures are analyzed by using light compatible in situ transmission electron microscopy (TEM) utilizing an optical TEM holder allowing for the simultaneous mechanical deformation, electrical probing and light illumination of a sample. Two types of deformation, namely, (i) bending of nanosheets perpendicular to their basal atomic planes and (ii) edge deformation parallel to the basal atomic planes, lead to two distinctly different optomechanical performances of the nanosheet stacks. The former deformation induces a stable but rather marginal increase in photocurrent, whereas the latter mode is prone to unstable nonsystematic photocurrent value changes and a red-shifted photocurrent spectrum. The experimental results are verified by ab initio calculations using density functional theory (DFT).
RESUMO
A large variety of recently predicted and synthesized 2D materials significantly broaden the capabilities of magnetic interface design for spintronic applications. Their diverse structural and electronic properties allow fine adjustment of interfacial interactions between the electrode and spacer materials providing robust and effective spin transport. Based on recent experimental results, here we present a theoretical study of novel interfaces formed by a half-metallic Co2FeGe1/2Ga1/2 (CFGG) substrate with h-BN or MoSe2 monolayer on its top. By means of the DFT approach, the structural, magnetic and electronic properties are studied for the Co- and FeGeGa termination of the CFGG surface. The observed large spin polarization in the vicinity of the interface and robust magnetization exhibit the potential of 2D materials/CFGG heterostructures for spintronic applications.
RESUMO
Two-dimensional materials such as hexagonal boron nitride (h-BN) and graphene have attracted wide attention in nanoelectronics and spintronics. Since their electronic characteristics are strongly affected by the local atomic structure, the heteroatom doping could allow us to tailor the electronic and physical properties of two-dimensional materials. In this study, a non-chemical method of heteroatom doping into h-BN under high-energy ion irradiation was demonstrated for the LiF/h-BN/Cu heterostructure. Spectroscopic analysis of chemical states on the relevant atoms revealed that 6% ± 2% fluorinated h-BN is obtained by the irradiation of 2.4 MeV Cu2+ ions with the fluence up to 1014 ions cm-2. It was shown that the high-energy ion irradiation leads to a single-sided fluorination of h-BN by the formation of the fluorinated sp 3-hybridized BN.
RESUMO
Metal-semiconductor hybrid nanomaterials are becoming increasingly popular for photocatalytic degradation of organic pollutants. Herein, a seed-assisted photodeposition approach is put forward for the site-specific growth of Pt on Au-ZnO particles (Pt-Au-ZnO). A similar approach was also utilized to enlarge the Au nanoparticles at epitaxial Au-ZnO particles (Au@Au-ZnO). An epitaxial connection at the Au-ZnO interface was found to be critical for the site-specific deposition of Pt or Au. Light on-off photocatalysis tests, utilizing a thiazine dye (toluidine blue) as a model organic compound, were conducted and confirmed the superior photodegradation properties of Pt-Au-ZnO hybrids compared to Au-ZnO. In contrast, Au-ZnO type hybrids were more effective toward photoreduction of toluidine blue to leuco-toluidine blue. It was deemed that photoexcited electrons of Au-ZnO (Au, â¼5 nm) possessed high reducing power owing to electron accumulation and negative shift in Fermi level/redox potential; however, exciton recombination due to possible Fermi-level equilibration slowed down the complete degradation of toluidine blue. In the case of Au@Au-ZnO (Au, â¼15 nm), the photodegradation efficiency was enhanced and the photoreduction rate reduced compared to Au-ZnO. Pt-Au-ZnO hybrids showed better photodegradation and mineralization properties compared to both Au-ZnO and Au@Au-ZnO owing to a fast electron discharge (i.e. better electron-hole seperation). However, photoexcited electrons lacked the reducing power for the photoreduction of toluidine blue. The ultimate photodegradation efficiencies of Pt-Au-ZnO, Au@Au-ZnO, and Au-ZnO were 84, 66, and 39%, respectively. In the interest of effective metal-semiconductor type photocatalysts, the present study points out the importance of choosing the right metal, depending on whether a photoreduction and/or photodegradation process is desired.
RESUMO
Memristors, resistive switching memory devices, play a crucial role in the energy-efficient implementation of artificial intelligence. This study investigates resistive switching behavior in a lateral 2D composite structure composed of bilayer graphene and 2D diamond (diamane) nanostructures formed using electron beam irradiation. The resulting bigraphene/diamane structure exhibits nonlinear charge carrier transport behavior and a significant increase in resistance. It is shown that the resistive switching of the nanostructure is well controlled using bias voltage. The impact of an electrical field on the bonding of diamane-stabilizing functional groups is investigated. By subjecting the lateral bigraphene/diamane/bigraphene nanostructure to a sufficiently strong electric field, the migration of hydrogen ions and/or oxygen-related groups located on one or both sides of the nanostructure can occur. This process leads to the disruption of sp3 carbon bonds, restoring the high conductivity of bigraphene.
RESUMO
Integration of half-metallic materials and 2D spacers into vertical magnetoresistive spin valves may pave the way for effective low-power consumption storage and memory technologies. Driven by the recent successful growth of graphene/half-metallic Co2Fe(Ge1/2Ga1/2) (CFGG) heterostructure, here we report a theoretical investigation of magnetic tunnel junction (MTJ) based on the ferromagnetic CFGG Heusler alloy and the MoS2 spacer of different thicknesses. Using ab initio approach, we demonstrate that the inherent ferromagnetism of CFGG is preserved at the interface, while its half-metallicity is recovering within few atomic layers. Ballistic transport in CFGG/MoS2/CFGG MTJ is studied within the nonequilibrium Green's function formalism, and a large magnetoresistance value up to â¼105% is observed. These findings support the idea of effective spintronics devices based on half-metallic Heusler alloys and highly diversified transition metal dichalcogenide family.
RESUMO
Here, we investigate stability of the diamane oxide films and show that various compositions can be realized depending on the precursors, temperature, and pressure. We demonstrate that the commonly used oxygen source in the H2O form requires pressures of GPa order to fabricate the film, which is in full agreement with the experimental data. We show that different types of functional groups can tailor electronic properties of bilayer diamane. Finally, we study electronic property dependence on the film thickness, elucidating its connection with surface states.
RESUMO
We propose a novel approach to disperse and extract small-diameter single-walled carbon nanotubes (SWCNTs) using an aqueous solution of riboflavin and Sephacryl gel. The extraction of small-diameter semiconducting SWCNTs was observed, regardless of the initial diameter distribution of the SWCNTs. Dispersion of SWCNTs occurs due to the adsorption of π-conjugated isoalloxazine moieties on the surface of small-diameter nanotubes and interactions between hydroxy groups of ribityl chains with water. During the SWCNT extraction, specific adsorption of riboflavin to SWCNTs leads to the minimization of interactions between the SWCNTs and gel media. Our experimental findings are supported by ab initio calculations demonstrating the impact of the riboflavin wrapping pattern around the SWCNTs on their interaction with the allyl dextran gel.
RESUMO
Graphene-based vertical spin valves (SVs) are expected to offer a large magnetoresistance effect without impairing the electrical conductivity, which can pave the way for the next generation of high-speed and low-power-consumption storage and memory technologies. However, the graphene-based vertical SV has failed to prove its competence due to the lack of a graphene/ferromagnet heterostructure, which can provide highly efficient spin transport. Herein, the synthesis and spin-dependent electronic properties of a novel heterostructure consisting of single-layer graphene (SLG) and a half-metallic Co2 Fe(Ge0.5 Ga0.5 ) (CFGG) Heusler alloy ferromagnet are reported. The growth of high-quality SLG with complete coverage by ultrahigh-vacuum chemical vapor deposition on a magnetron-sputtered single-crystalline CFGG thin film is demonstrated. The quasi-free-standing nature of SLG and robust magnetism of CFGG at the SLG/CFGG interface are revealed through depth-resolved X-ray magnetic circular dichroism spectroscopy. Density functional theory (DFT) calculation results indicate that the inherent electronic properties of SLG and CFGG such as the linear Dirac band and half-metallic band structure are preserved in the vicinity of the interface. These exciting findings suggest that the SLG/CFGG heterostructure possesses distinctive advantages over other reported graphene/ferromagnet heterostructures, for realizing effective transport of highly spin-polarized electrons in graphene-based vertical SV and other advanced spintronic devices.
RESUMO
Single-walled carbon nanotubes (SWCNTs) possess extraordinary physical and chemical properties. Thin films of randomly oriented SWCNTs have great potential in many opto-electro-mechanical applications. However, good adhesion of SWCNT films with a substrate material is pivotal for their practical use. Here, for the first time, we systematically investigate the adhesion properties of SWCNT thin films with commonly used substrates such as glass (SiO2), indium tin oxide (ITO), crystalline silicon (C-Si), amorphous silicon (a-Si:H), zirconium oxide (ZrO2), platinum (Pt), polydimethylsiloxane (PDMS), and SWCNTs for self-adhesion using atomic force microscopy. By comparing the results obtained in air and inert Ar atmospheres, we observed that the surface state of the materials greatly contributes to their adhesion properties. We found that the SWCNT thin films have stronger adhesion in an inert atmosphere. The adhesion in the air can be greatly improved by a fluorination process. Experimental and theoretical analyses suggest that adhesion depends on the atmospheric conditions and surface functionalization.