Application of Machine Learning Methods for an Analysis of E-Nose Multidimensional Signals in Wastewater Treatment.

The work represents a successful attempt to combine a gas sensors array with instrumentation (hardware), and machine learning methods as the basis for creating numerical codes (software), together constituting an electronic nose, to correct the classification of the various stages of the wastewater treatment process. To evaluate the multidimensional measurement derived from the gas sensors array, dimensionality reduction was performed using the t-SNE method, which (unlike the commonly used PCA method) preserves the local structure of the data by minimizing the Kullback-Leibler divergence between the two distributions with respect to the location of points on the map. The k-median method was used to evaluate the discretization potential of the collected multidimensional data. It showed that observations from different stages of the wastewater treatment process have varying chemical fingerprints. In the final stage of data analysis, a supervised machine learning method, in the form of a random forest, was used to classify observations based on the measurements from the sensors array. The quality of the resulting model was assessed based on several measures commonly used in classification tasks. All the measures used confirmed that the classification model perfectly assigned classes to the observations from the test set, which also confirmed the absence of model overfitting.

Environmental Engineering Applications of Electronic Nose Systems Based on MOX Gas Sensors.

Nowadays, the electronic nose (e-nose) has gained a huge amount of attention due to its ability to detect and differentiate mixtures of various gases and odors using a limited number of sensors. Its applications in the environmental fields include analysis of the parameters for environmental control, process control, and confirming the efficiency of the odor-control systems. The e-nose has been developed by mimicking the olfactory system of mammals. This paper investigates e-noses and their sensors for the detection of environmental contaminants. Among different types of gas chemical sensors, metal oxide semiconductor sensors (MOXs) can be used for the detection of volatile compounds in air at ppm and sub-ppm levels. In this regard, the advantages and disadvantages of MOX sensors and the solutions to solve the problems arising upon these sensors' applications are addressed, and the research works in the field of environmental contamination monitoring are overviewed. These studies have revealed the suitability of e-noses for most of the reported applications, especially when the tools were specifically developed for that application, e.g., in the facilities of water and wastewater management systems. As a general rule, the literature review discusses the aspects related to various applications as well as the development of effective solutions. However, the main limitation in the expansion of the use of e-noses as an environmental monitoring tool is their complexity and lack of specific standards, which can be corrected through appropriate data processing methods applications.

Determination of Time Domain Reflectometry Surface Sensors Sensitivity Depending on Geometry and Material Moisture.

The article concerns the electric techniques of moisture detection that are based on the evaluation of the apparent permittivity of the tested medium. The main goal of the research was to evaluate the non-invasive Time Domain Reflectometry (TDR) sensors' sensitivity by measuring the span of elements and material moisture. To that aim, two non-invasive sensor designs were investigated for their sensitivity in the evaluation of the apparent permittivity value of aerated concrete. Sensors A and B were characterized by the spacing between the measuring elements equal to 30 mm and 70 mm, respectively. The tested samples differed in moisture, ranging between 0 and 0.3 cm3/cm3 volumetric water content. Within the research, it was stated that in the case of the narrower sensor (A), the range of the sensor equals about 30 mm, and in the case of the wider design (B), it equals about 50 mm. Additionally, it was stated that material moisture influences the range of sensor influence. In the case of the dry and low-saturated material, it was not possible to evaluate the range of sensor sensitivity using the adopted method, whereas the range of sensor signal influence was visible for the moist material.

Determining the shelf life and quality changes of potatoes (Solanum tuberosum) during storage using electronic nose and machine learning.

The activities of alpha-amylase, beta-amylase, sucrose synthase, and invertase enzymes are under the influence of storage conditions and can affect the structure of starch, as well as the sugar content of potatoes, hence altering their quality. Storage in a warehouse is one of the most common and effective methods of storage to maintain the quality of potatoes after their harvest, while preserving their freshness and sweetness. Smart monitoring and evaluation of the quality of potatoes during the storage period could be an effective approach to improve their freshness. This study is aimed at assessing the changes in the potato quality by an electronic nose (e-nose) in terms of the sugar and carbohydrate contents. Three potato cultivars (Agria, Santé, and Sprite) were analyzed and their quality variations were separately assessed. Quality parameters (i.e. sugar and carbohydrate contents) were evaluated in six 15-day periods. The e-nose data were analyzed by means of chemometric methods, including principal component analysis (PCA), linear data analysis (LDA), support vector machine (SVM), and artificial neural network (ANN). Quadratic discriminant analysis (QDA) and multivariate discrimination analysis (MDA) offer the highest accuracy and sensitivity in the classification of data. The accuracy of all methods was higher than 90%. These results could be applied to present a new approach for the assessment of the quality of stored potatoes.

Flood occurrence analysis in small urban catchments in the context of regional variability.

An original method for analyzing the influence of the meteorological, as well as physical-geographical conditions on the flooding of stormwater in small urban catchment areas is proposed. A logistical regression model is employed for the identification of the flooding events. The elaborated model enables to simulate the stormwater flooding in a single rainfall event, on the basis of the rainfall depth, duration, imperviousness of the catchment and its spatial distribution within the analyzed area, as well as the density of the stormwater network. The rainfall events are predicted considering the regional convective rainfall model for 32 rain gauges located in Poland, based on 44 years of rainfall data. In the study, empirical models are obtained to calculate the rainfall duration conditioning the flooding of stormwater in a small urban catchment area depending on the characteristics of the examined urban basins. The empirical models enabling to control the urbanization process of catchment areas, accounting for the local rainfall and meteorological characteristics are provided. The paper proposes a methodology for the identification of the areas especially sensitive to stormwater flooding in small urban catchment areas depending to the country scale. By employing the presented methodology, the regions with most sensitive urban catchments are identified. On this basis, a ranking of towns and cities is determined from the most sensitive to flooding in small urban catchment areas to the regions where the risk of flooding is lower. Using the method developed in the paper, maximum impervious catchment area are determined for the selected regions of the country, the exceedance of which determines the occurrence of stormwater flooding.