The association between pre-operative pain sensitisation and chronic pain after knee replacement: an exploratory study.

OBJECTIVE: Chronic pain after total knee replacement (TKR) is a prevalent condition, affecting about 20% of patients. The aim of this study was to explore the relationship between pre-operative pain thresholds and chronic pain after TKR. DESIGN: Patients listed for a TKR because of osteoarthritis participated in a Quantitative Sensory Testing (QST) session prior to surgery. Pressure pain thresholds (PPTs) and hot pain thresholds were assessed at the osteoarthritic knee and the forearm. Patients were followed-up at 1-year after TKR, and the severity of pain in the replaced knee was assessed using the WOMAC Pain score. Pre-operative median QST thresholds were compared to thresholds from a normative database collected from 50 people with no knee pain. The relationship between pre-operative pain thresholds and pain severity post TKR were tested using correlations. RESULTS: Fifty-one patients participated in a pre-operative QST session and completed a 1-year WOMAC Pain score. Pre-operatively, patients demonstrated evidence of localised (knee) and widespread (forearm) pain sensitisation in response to pressure stimuli compared to healthy participants. Pre-operative PPTs at the forearm were found to be significantly correlated with 1-year WOMAC Pain scores (r = 0.37, P = 0.008). CONCLUSIONS: This study provides preliminary evidence that pre-operative widespread pain sensitisation, measured using pressure algometry, may be associated with chronic pain after TKR. Further research is needed to explore the predictive value of an assessment of pre-operative widespread pain sensitisation in identifying who is likely to develop chronic pain after TKR.

Test-retest reliability of Quantitative Sensory Testing in knee osteoarthritis and healthy participants.

Quantitative Sensory Testing (QST), which assesses somatosensory function by recording participant's responses to external stimuli of controlled intensity, is a useful tool to provide insight into the complex pathophysiology of osteoarthritis (OA) pain. However, QST is not commonly used in rheumatology because the test-retest reliability properties of QST in OA patients have not yet been established. This brief report presents the finding of a study which assessed the test-retest reliability of light touch thresholds, pressure pain thresholds, thermal sensation thresholds and thermal pain thresholds in 50 knee OA patients and 50 healthy participants. Pressure pain thresholds were found to be the least variable measurement, as median thresholds did not differ significantly over the 1 week period and the results were highly correlated. This provides support for the inclusion of pressure algometry in studies assessing pain perception abnormalities in OA.

Validation for the reduced Western Ontario and McMaster Universities Osteoarthritis Index function scale.

PURPOSE: To assess the criterion validity, repeatability, and the missing value protocol of the reduced Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) function scale ('reduced scale'). METHODS: Three separate studies were performed: a cross-over study to compare the full- and reduced-scale scores in 66 UK patients for validity, a test-retest study for repeatability in 103 Australian patients, and a study for the missing value protocol of the reduced-scale questionnaire. RESULTS: There was no significant difference between scores for the full- and reduced-scale questionnaires in both cross-over and test-retest studies. For the missing value protocol of the reduced-scale questionnaire, when 3 or more of the 7 items were missing, the patient's response was regarded as invalid and the sub-scale score was eliminated from further analysis; when 2 or fewer items were missing, the mean value of the sub-scale was substituted for the missing values. CONCLUSIONS: The reduced-scale questionnaire retains excellent validity and repeatability. Its use is recommended along with the original pain dimension in studies of total joint replacement.

Orthopaedic metals and their potential toxicity in the arthroplasty patient: A review of current knowledge and future strategies.

The long-term effects of metal-on-metal arthroplasty are currently under scrutiny because of the potential biological effects of metal wear debris. This review summarises data describing the release, dissemination, uptake, biological activity, and potential toxicity of metal wear debris released from alloys currently used in modern orthopaedics. The introduction of risk assessment for the evaluation of metal alloys and their use in arthroplasty patients is discussed and this should include potential harmful effects on immunity, reproduction, the kidney, developmental toxicity, the nervous system and carcinogenesis.

Total knee replacement: is it really an effective procedure for all?

Total knee replacement (TKR) is considered an effective intervention for the treatment of chronic knee pain and disability. Yet there is increasing evidence, based on research using patient-based outcome measures, that a significant proportion of patients experience chronic knee pain, functional disability, a poor quality of life and dissatisfaction after TKR. Although some poor outcomes after TKR are due to surgical technique and implant factors, much of the pain and disability after surgery is medically unexplained. A range of possible patient factors could contribute to a poor outcome after TKR. Socio-demographic factors that have been found to correlate with a poor outcome after TKR include female gender, older age and low socio-economical status. Medical factors that are highly predictive of pain and disability after TKR are a greater number of co-morbidities and a worse pre-operative status. A range of psychological factors could be predictive of a poor outcome after surgery including depression, low self-efficacy, poor pain coping strategies, somatization, low social support and patient expectations. It is also proposed that a biological explanation for continuing pain after TKR could involve central sensitisation, a dysfunction of pain modulation by the central nervous system. To improve patient selection for TKR, future research needs to focus on developing a pre-operative screening protocol to identify those patients at risk of medically unexplained pain and disability after TKR.

Precision of wear measurement using the shadowgraph technique.

The shadowgraph technique is a relatively easy-to-use and inexpensive method of wear measurement from explanted acetabular cups. In this technique, from a mould of the internal surface of the cup, measurements of linear wear and wear angle can be obtained, from which volumetric wear can be calculated. In this study the measurement precision of this technique was assessed and the influence of different observers and multiple moulds was also determined. It was found that linear wear (coefficient of variation (CV) = 1.49 per cent) can be more precisely determined than wear angle (CV = 8.18 per cent) and that both the observer and the mould can significantly influence the results obtained, although the influence of the mould is considerably less than that of the observer.

The development of a model for in vitro testing of femoral stems in impaction bone grafting.

Comprehension of the biomechanical behaviour of orthopaedic implants is essential. This paper describes the development of an in vitro model to investigate the behaviour of femoral implants in the revision setting. The development of a femoral model and a bone graft substitute is described. The properties of human, bovine, ovine morselized bone graft, and a graft substitute were compared. On measuring hoop strain after impaction bone grafting there was no significant difference between the ovine bone graft and graft substitute with the size 1 Exeter stem. The results suggest that this bone graft substitute is a viable alternative for in vitro testing. The authors recommend the use of the graft substitute and the femoral model to predict femoral stem biomechanics.

The entrapment of corrosion products from CoCr implant alloys in the deposits of calcium phosphate: a comparison of serum, synovial fluid, albumin, EDTA, and water.

Physical wear of orthopedic implants is inevitable. CoCr alloy samples, typically used in joint reconstruction, corrode rapidly after removal of the protective oxide layer. The behavior of CoCr pellets immersed in human serum, foetal bovine serum (FBS), synovial fluid, albumin in phosphate-buffered saline (PBS), EDTA in PBS, and water were studied using X-ray Photoelectron Spectroscopy (XPS) and Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS). The difference in the corrosive nature of human serum, water, albumin in PBS and synovial fluid after 5 days of immersion was highlighted by the oxide layer, which was respectively 15, 3.5, 1.5, and 1.5 nm thick. The thickness of an additional calcium phosphate deposit from human serum and synovial fluid was 40 and 2 nm, respectively. Co and Cr ions migrated from the bulk metal surface and were trapped in this deposit by the phosphate anion. This may account for the composition of wear debris from CoCr orthopedic implants, which is known to consist predominantly of hydroxy-phosphate compounds. Known components of synovial fluid including proteoglycans, pyrophosphates, phospholipids, lubricin, and superficial zone protein (SZP), have been identified as possible causes for the lack of significant calcium phosphate deposition in this environment. Circulation of these compounds around the whole implant may inhibit calcium phosphate deposition.

Numerical predictions of the thermal behaviour and resultant effects of grouting cements while setting prosthetic components in bone.

Acrylic cements are commonly used to attach prosthetic components in joint replacement surgery. The cements set in short periods of time by a complex polymerization of initially liquid monomer compounds into solid structures with accompanying significant heat release. Two main problems arise from this form of fixation: the first is the potential damage caused by the temperature excursion, and the second is incomplete reaction leaving active monomer compounds, which can potentially be slowly released into the patient. This paper presents a numerical model predicting the temperature-time history in an idealized prosthetic-cement-bone system. Using polymerization kinetics equations from the literature, the degree of polymerization is predicted, which is found to be very dependent on the thermal history of the setting process. Using medical literature, predictions for the degree of thermal bone necrosis are also made. The model is used to identify the critical parameters controlling thermal and unreacted monomer distributions.

Clinical experience with metal-on-metal total joint replacements: indications and results.

Survivorship of total joint arthroplasty depends on the durability of fixation and durability of articulation. The metal-on-polyethylene articular couple has been the most widely used. Polyethylene wear (and the associated cytochemical events that culminate in osteolysis) has been identified as a major factor adversely influencing the durability of joint replacement. This stimulated the orthopaedic community to explore the possibility of using alternative bearings with lower wear rates. Hard-on-hard bearings have been shown to be associated with reduced wear. Metal-on-metal bearings have wear rates that are 20-100 times lower than metal on conventional polyethylene. However, patients with metal-on-metal articulations have increased levels of cobalt and chromium in the serum and urine, and this has raised concerns about toxicity, mutagenesis, and hypersensitivity. At this stage there is no epidemiological evidence to suggest that the risk of carcinogenesis is anything more than theoretical. Successful long-term results have been reported with the cast cobalt-chromium metal-on-metal couples of the mid-1960s. Tissues retrieved at revision of these implants did not show the giant-cell inflammatory response associated with polyethylene particles. Several researchers have reported excellent mid-term results with the current generation of high-precision metal-on-metal bearings.

An unusual lymphocytic perivascular infiltration in tissues around contemporary metal-on-metal joint replacements.

BACKGROUND: Metal-on-metal bearing surfaces have been reintroduced for use during total hip replacement. To assess tissue reactions to various types of articulations, we studied the histological appearance of periprosthetic tissues retrieved from around metal-on-metal and metal-on-polyethylene total hip replacements and compared these findings with the appearance of control tissues retrieved at the time of primary arthroplasty. METHODS: Periprosthetic tissues were obtained at the time of revision of twenty-five cobalt chromium-on-cobalt chromium, nine cobalt chromium-on-polyethylene, and ten titanium-on-polyethylene total hip arthroplasties. Control tissues were obtained from nine osteoarthritic hips at the time of primary total hip arthroplasty. Each tissue sample was processed for routine histological analysis, and sections were stained with hematoxylin and eosin. Quantitative stereological analysis was performed with use of light microscopy. RESULTS: Tissue samples obtained from hips with metal-on-metal implants displayed a pattern of well-demarcated tissue layers. A prominent feature, seen in seventeen of twenty-five tissue samples, was a pattern of perivascular infiltration of lymphocytes. In ten of the tissue samples obtained from hips with metal-on-metal prostheses, there was also an accumulation of plasma cells in association with macrophages that contained metallic wear-debris particles. The surfaces of tissues obtained from hips with metal-on-metal prostheses were more ulcerated than those obtained from hips with other types of implants, particularly in the region immediately superficial to areas of perivascular lymphocytic infiltration. The lymphocytic infiltration was more pronounced in samples obtained at the time of revision because of aseptic failure than in samples retrieved at the time of autopsy or during arthrotomy for reasons other than aseptic failure. Total-joint-replacement and surface-replacement designs of metal-on-metal prostheses were associated with similar results. Tissue samples obtained from hips with metal-on-polyethylene implants showed far less surface ulceration, much less distinction between tissue layers, no pattern of lymphocytic infiltration, and no plasma cells. The inflammation was predominantly histiocytic. Tissues retrieved from hips undergoing primary joint replacement showed dense scar tissue and minimal inflammation. CONCLUSIONS AND CLINICAL RELEVANCE: The pattern and type of inflammation seen in periprosthetic tissues obtained from hips with metal-on-metal and metal-on-polyethylene implants are very different. At the present time, we do not know the prevalence or clinical implications of these histologic findings, but we suggest that they may represent a novel mode of failure for some metal-on-metal joint replacements.

Revision of an acetabular liner has a high risk of dislocation.

Polyethylene liners of modular acetabular components wear sometimes need to be replaced, despite the metal shell being well fixed. Replacing the liner is a relatively simple procedure, but very little is known of the outcome of revision. We prospectively followed up 1126 Harris-Galante I metal-backed, uncemented components for between nine and 19 years. We found 38 (3.4%) liners of 1126 acetabular components wore and required revision. These revisions were then followed up for a mean of 4.8 years. The rate of dislocation was 28.9%. Nine of the dislocations occurred once and two were recurrent. The overall secondary revision rate was three of 38 total hip replacements (7.9%) at a mean follow-up of 4.8 years. This gives a 92.1% survivorship (35 of 38) at under five years. In isolated revision of a liner, we had a complication rate of 23% (three of 13). In revision of a liner combined with revision of the femoral stem, there was a complication rate of 48% (12 of 25). We discuss possible reasons for the high dislocation rates. Leaving the well-fixed acetabular shell in situ leads to an increased risk of instability. However, this needs to be balanced against the otherwise low complication rate for revision of the liner. Patients should be consented accordingly.

Ten-year results of a press-fit, porous-coated acetabular component.

We retrospectively reviewed, ten years after surgery, 100 consecutive total hip replacements in which the Duraloc 300 cup had been used. Post-operative radiographs were analysed for placement of the cup and interface gaps and follow-up radiographs for lucent lines, osteolysis, wear and migration. All the components were found to be stable with no evidence of loosening. The mean rate of wear was 0.12 mm/year. Three hips developed acetabular osteolysis at the level of the apex hole. Two have successfully undergone bone grafting without removal of the implants and one patient is awaiting surgery. The Duraloc 300 cup has a survival of 100% at ten years with no aseptic loosening and a low incidence of pelvic osteolysis.

Metal-specific differences in levels of DNA damage caused by synovial fluid recovered at revision arthroplasty.

Previous research has shown an increase in chromosomal aberrations in patients with worn implants. The type of aberration depended on the type of metal alloy in the prosthesis. We have investigated the metal-specific difference in the level of DNA damage (DNA stand breaks and alkali labile sites) induced by culturing human fibroblasts in synovial fluid retrieved at revision arthroplasty. All six samples from revision cobalt-chromium metal-on-metal and four of six samples from cobalt-chromium metal-on-polyethylene prostheses caused DNA damage. By contrast, none of six samples from revision stainless-steel metal-on-polyethylene prostheses caused significant damage. Samples of cobalt-chromium alloy left to corrode in phosphate-buffered saline also caused DNA damage and this depended on a synergistic effect between the cobalt and chromium ions. Our results further emphasise that epidemiological studies of orthopaedic implants should take account of the type of metal alloy used.

The compatibility of ceramic bone graft substitutes as allograft extenders for use in impaction grafting of the femur.

This study investigates the use of porous biphasic ceramics as graft extenders in impaction grafting of the femur during revision hip surgery. Impaction grafting of the femur was performed in four groups of sheep. Group one received pure allograft, group two 50% allograft and 50% BoneSave, group three 50% allograft and 50% BoneSave type 2 and group four 10% allograft and 90% BoneSave as the graft material. Function was assessed using an index of pre- and post-operative peak vertical ground reaction force ratios. Changes in bone mineral density were measured by dual energy X ray absorptiometry (DEXA) scanning. Loosening and subsidence were assessed radiographically and by histological examination of the explanted specimens. There was no statistically significant difference between the four groups after 18 months of unrestricted functional loading for all outcome measures.

An in-vitro investigation into the cement pressurization achieved during insertion of four different femoral stems.

Adequate cement pressurization during stem insertion improves the interdigitation of cement into bone. This increases the strength of the cement-bone interface, thus contributing to the reduction of the incidence of aseptic loosening, the commonest cause of revision surgery. This in-vitro study compared the cement pressurization achieved during insertion of four different stems of equivalent sizes: the Elite Plus (DePuy, UK), C-Stem (DePuy, UK), Exeter (Stryker, USA), and CPS-Plus (Plus Orthopedics, Switzerland). The maximum pressures attained at the time of stem insertion were recorded at proximal, mid and distal stem levels. The Elite Plus generated significantly higher distal pressures than the other stems. The CPS-Plus generated significantly greater proximal cement pressures than the Elite Plus, C-Stem, and Exeter prostheses. The triple taper of the C-Stem increased the cement pressurization medial to the stem. The stem shape and the presence or absence of a proximal stem centralizer affect cement pressurization. The presence of a proximal stem centralizer, a large stem volume, and a lateral-medial taper are all factors associated with increased cement pressurization during stem insertion.

Outcome assessment following total hip replacement.

Outcome assessment after hip anthroplasty is relevant both to in-depth research of specific procedures and to monitoring standards of practice. Instruments of outcome assessment should be fast, easy to use, reliable, specific to the question being asked, cost-effective, and applicable. Increasing evidence exists that patient-based outcome measures are more reliable than those based on clinicians' scores. This article reviews the types of instruments that are available and offers guidance about the outcome measures that are most approprate for orthopedic surgeons.

Namaqualand hip dysplasia: an autosomal dominant entity.

A unique inherited skeletal disorder has been identified in 45 persons in five generations of a kindred of mixed ancestry in South Africa. Discomfort in the hip joints develops in childhood and the course is progressive, with handicap in middle age. General health is good, height is not reduced by any significant degree, and there is no nonskeletal involvement. The major changes are in the femoral capital epiphyses, which are flattened and fragmented; secondary degenerative arthropathy develops at a later stage. Platyspondyly of variable but mild degree is present in about 60% of affected persons. Other minor changes, including iliac exostoses, are present occasionally. Pedigree data indicate autosomal dominant inheritance, with a reasonably consistent phenotypic expression. In view of the geographic distribution of this condition we propose the designation "Namaqualand hip dysplasia" (NHD).

Glass ionomer as an expander of allograft in revision arthroplasty of the hip.

The use of glass ionomer as a bone graft expander was investigated in an in vivo model of revision hip arthroplasty. Bone grafts of pure allograft and allograft + glass ionomer particles in a 50:50 by weight mixture were implanted in an ovine hemi-arthroplasty model. Post-operative assessments of locomotor function, radiographic appearance and quantitative changes in mineralisation around the graft were made at 2, 4 and 6 months. Post-mortem assessments of radiographic and histologic appearance of the grafts were made at 6 months. No significant differences were noted in any of the measured or assessed parameters between the two graft types. The glass ionomer particles seemed to be well tolerated within the matrix of new bone, smaller sized particles appearing to be better incorporated than larger ones. The use of particles of glass ionomer as a bone graft expander, in this in vivo model of revision hip arthroplasty, would therefore appear to offer no detriment in performance over pure allograft in the short to medium term.

A simple technique for varus supracondylar osteotomy in genu valgum.

Varus osteotomy of the distal femur is recommended for osteoarthritis of the knee with significant valgus deformity, but the operation is difficult to plan and perform. A simple technique involving a jig referenced to the line of the tibia is described. This allows accurate overcorrection by a few degrees, with impaction and secure fixation at the osteotomy. It has been successful, with no complications, in 12 consecutive knees.