Quantifying inactive lithium in lithium metal batteries.

Lithium metal anodes offer high theoretical capacities (3,860 milliampere-hours per gram)1, but rechargeable batteries built with such anodes suffer from dendrite growth and low Coulombic efficiency (the ratio of charge output to charge input), preventing their commercial adoption2,3. The formation of inactive ('dead') lithium- which consists of both (electro)chemically formed Li+ compounds in the solid electrolyte interphase and electrically isolated unreacted metallic Li0 (refs 4,5)-causes capacity loss and safety hazards. Quantitatively distinguishing between Li+ in components of the solid electrolyte interphase and unreacted metallic Li0 has not been possible, owing to the lack of effective diagnostic tools. Optical microscopy6, in situ environmental transmission electron microscopy7,8, X-ray microtomography9 and magnetic resonance imaging10 provide a morphological perspective with little chemical information. Nuclear magnetic resonance11, X-ray photoelectron spectroscopy12 and cryogenic transmission electron microscopy13,14 can distinguish between Li+ in the solid electrolyte interphase and metallic Li0, but their detection ranges are limited to surfaces or local regions. Here we establish the analytical method of titration gas chromatography to quantify the contribution of unreacted metallic Li0 to the total amount of inactive lithium. We identify the unreacted metallic Li0, not the (electro)chemically formed Li+ in the solid electrolyte interphase, as the dominant source of inactive lithium and capacity loss. By coupling the unreacted metallic Li0 content to observations of its local microstructure and nanostructure by cryogenic electron microscopy (both scanning and transmission), we also establish the formation mechanism of inactive lithium in different types of electrolytes and determine the underlying cause of low Coulombic efficiency in plating and stripping (the charge and discharge processes, respectively, in a full cell) of lithium metal anodes. We propose strategies for making lithium plating and stripping more efficient so that lithium metal anodes can be used for next-generation high-energy batteries.

Improvement of volatile switching in scaled silicon nanofin memristor for high performance and efficient reservoir computing.

Conductive-bridge random access memory can be used as a physical reservoir for temporal learning in reservoir computing owing to its volatile nature. Herein, a scaled Cu/HfOx/n+-Si memristor was fabricated and characterized for reservoir computing. The scaled, silicon nanofin bottom electrode formation is verified by scanning electron and transmission electron microscopy. The scaled device shows better cycle-to-cycle switching variability characteristics compared with those of large-sized cells. In addition, synaptic characteristics such as conductance changes due to pulses, paired-pulse facilitation, and excitatory postsynaptic currents are confirmed in the scaled memristor. High-pattern accuracy is demonstrated by deep neural networks applied in neuromorphic systems in conjunction with the use of the Modified National Institute of Standards and Technology database. Furthermore, a reservoir computing system is introduced with six different states attained by adjusting the amplitude of the input pulse. Finally, high-performance and efficient volatile reservoir computing in the scaled device is demonstrated by conductance control and system-level reservoir computing simulations.

Synthesis and biological evaluation of N-(3-fluorobenzyl)-4-(1-(methyl-d3)-1H-indazol-5-yl)-5-(6-methylpyridin-2-yl)-1H-imidazol-2-amine as a novel, potent ALK5 receptor inhibitor.

Specific inhibition of ALK5 provides a novel method for controlling the development of cancers and fibrotic diseases. In this work, a novel series of N-(3-fluorobenzyl)-4-(1-(methyl-d3)-1H-indazol-5-yl)-5-(6-methylpyridin-2-yl)-1H-imidazol-2-amine (11), a potential clinical candidate, was synthesized by strategic incorporation of deuterium at potential metabolic soft spots and identified as ALK5 inhibitors. This compound has a low potential for CYP-mediated drug-drug interactions as a CYP450 inhibitor (IC50 = >10 µM) and showed potent inhibitory effects in cellular assay (IC50 = 3.5 ± 0.4 nM). The pharmacokinetic evaluation of 11 in mice demonstrated moderate clearance (29.0 mL/min/kg) and also revealed high oral bioavailability in mice (F = 67.6%).

Household-specific physical activity levels and energy intakes according to the presence of metabolic syndrome in Korean young adults: Korean National Health and nutrition examination survey 2016-2018.

BACKGROUND: Participation in exercise, and dietary and nutritional intakes have an impact on the risk and prevalence of metabolic syndrome (MetS), but these effects may differ according to whether a person lives alone or in a multi-person household. We analyzed differences in physical activity (PA) levels and energy intake according to household-type and MetS presence among young adults, to investigate the relationships among these factors. METHODS: Data of 3974 young adults (aged > 19 years and < 40 years) were obtained from the Korean National Health and Nutrition Examination Survey (2016-2018). We analyzed PA levels (occupational and recreational PA, and transport) and energy intake (total, carbohydrate, protein, and fat). RESULTS: Logistic regression data showed that low PA levels and higher energy intake were associated with MetS incidence and its components in young adults, after adjusting for body mass index, smoking, household-type, and sex. Overall, there was no significant difference in PA level between the MetS and non-MetS group. The total energy intake was higher in the MetS than in the non-MetS group (p <  0.05). These results were similar to those found in multi-person households. In single-person households, the MetS group had significantly lower PA levels (p <  0.01) and total energy intake (p <  0.05) than the non-MetS group. CONCLUSIONS: We found significant association among low PA levels, high energy intake, and MetS components in young Korean adults, but with patterns differing according to household type. Energy intake was higher in young adults with than those without MetS, who lived in multi-person households, while young adults with MetS who lived alone had lower PA levels and lower energy intake than those without MetS. These findings highlight the need for different approaches of implementing PA and nutrition strategies according to the type of household in order to prevent MetS.

Acoustic Power Measurement and Thermal Bioeffect Evaluation of Therapeutic Langevin Transducers.

We recently proposed an analytical design method of Langevin transducers for therapeutic ultrasound treatment by conducting parametric study to estimate the effect of compression force on resonance characteristics. In this study, experimental investigations were further performed under various electrical conditions to observe the acoustic power of the fully equipped transducer and to assess its heat-related bioeffect. Thermal index (TI) tests were carried out to examine temperature rise and thermal damage induced by the acoustic energy in fatty porcine tissue. Acoustic power emission, TI values, temperature characteristics, and depth/size of thermal ablation were measured as a function of transducer's driving voltage. By exciting the transducer with 300 Vpp sinusoidal continuous waveform, for instance, the average power was 23.1 W and its corresponding TI was 4.1, less than the 6 specified by the Food and Drug Administration (FDA) guideline. The maximum temperature and the depth of the affected site were 74.5 °C and 19 mm, respectively. It is shown that thermal ablation is likely to be more affected by steep heat surge for a short duration rather than by slow temperature rise over time. Hence, the results demonstrate the capability of our ultrasonic transducer intended for therapeutic procedures by safely interrogating soft tissue and yet delivering enough energy to thermally stimulate the tissue in depth.

Acoustic and Thermal Characterization of Therapeutic Ultrasonic Langevin Transducers under Continuous- and Pulsed Wave Excitations.

We previously conducted an empirical study on Langevin type transducers in medical use by examining the heat effect on porcine tissue. For maximum acoustic output, the transducer was activated by a continuous sinusoidal wave. In this work, pulsed waves with various duty factors were applied to our transducer model in order to examine their effect on functionality. Acoustic power, electro-acoustic conversion efficiency, acoustic pressure, thermal effect on porcine tissue and bovine muscle, and heat generation in the transducer were investigated under various input conditions. For example, the results of applying a continuous wave of 200 VPP and a pulse wave of 70% duty factor with the same amplitude to the transducer were compared. It was found that continuous waves generated 9.79 W of acoustic power, 6.40% energy efficiency, and 24.84 kPa acoustic pressure. In pulsed excitation, the corresponding values were 9.04 W, 8.44%, and 24.7 kPa, respectively. The maximum temperature increases in bovine muscle are reported to be 83.0 °C and 89.5 °C for each waveform, whereas these values were 102.5 °C and 84.5 °C in fatty porcine tissue. Moreover, the heat generation around the transducer was monitored under continuous and pulsed modes and was found to be 51.3 °C and 50.4 °C. This shows that pulsed excitation gives rise to less thermal influence on the transducer. As a result, it is demonstrated that a transducer triggered by pulsed waves improves the energy efficiency and provides sufficient thermal impact on biological tissues by selecting proper electrical excitation types.

Repair Rates for Multiple Descriptions on Distributed Storage.

In a traditional distributed storage system, a source can be restored perfectly when a certain subset of servers is contacted. The coding is independent of the contents of the source. This paper considers instead a lossy source coding version of this problem where the more servers that are contacted, the higher the quality of the restored source. An example could be video stored on distributed storage. In information theory, this is called the multiple description problem, where the distortion depends on the number of descriptions received. The problem considered in this paper is how to restore the system operation when one of the servers fail and a new server replaces it, that is, repair. The requirement is that the distortions in the restored system should be no more than in the original system. The question is how many extra bits are needed for repair. We find an achievable rate and show that this is optimal in certain cases. One conclusion is that it is necessary to design the multiple description codes with repair in mind; just using an existing multiple description code results in unnecessary high repair rates.

Relationship between allergic rhinitis and nasal surgery success in patients with obstructive sleep apnea.

OBJECTIVES: Nasal obstruction is common in patients with obstructive sleep apnea (OSA). Nonetheless, the effectiveness of isolated nasal surgery in treatment of OSA remains controversial. This study is to evaluate the subjective and objective outcome after isolated nasal surgery in patients with OSA and to determine the associated factors related to the success rate of isolated nasal surgery. METHODS: The study population consisted of 35 patients with nasal obstruction who had been diagnosed with OSA and were undergoing septoplasty and inferior turbinate reduction to correct nasal pathologies. Preoperative drug-induced sleep endoscopy was performed to evaluate the obstruction site. Patients were assessed before and after nasal surgery using subjective outcomes measures, including the Visual Analog Scale and Epworth Sleepiness Scale, as well as by overnight polysomnography. RESULTS: All patients experienced improved nasal breathing postoperatively. At 6 months postoperatively, patients exhibited significant symptomatic improvement in snoring, sleep apnea, morning headache, tiredness, and daytime sleepiness. Postoperative polysomnography revealed significant improvement in the apnea-hypopnea index, respiratory disturbance index, and percentage of time with oxygen saturation < 90%. Although the overall success rate of nasal surgery alone was 14.3%, the criteria for success were met in 50% of patients with allergic rhinitis. Furthermore, the success rate was significantly higher in patients with moderate to severe nasal obstruction than in patients with mild nasal obstruction. CONCLUSION: Among patients with OSA, those with allergic rhinitis and severe nasal obstruction are likely to have a better surgical outcome following isolated nasal surgery.

Gate-Tunable Optical Nonlinearities and Extinction in Graphene/LaAlO3/SrTiO3 Nanostructures.

We explore the ultrafast optical response of graphene subjected to intense (∼106 V/cm) local (∼10 nm) electric fields. Nanoscale gating of graphene is achieved using a voltage-biased, SrTiO3-based conductive nanowire junction "written" directly under the graphene and isolated from it by an insulating ultrathin (<2 nm) LaAlO3 barrier. Upon illumination with ultrafast visible-to-near-infrared (VIS-NIR) light pulses, the local field from the nanojunction creates a strong gate-tunable second-order nonlinearity in the graphene and produces a substantial difference-frequency (DFG) and sum-frequency generation (SFG) response detected by the nanojunction. Spectrally sharp, gate-tunable extinction features (>99.9%) are observed in the VIS-NIR and SFG spectral ranges, in parameter regimes that are positively correlated with the enhanced nonlinear response. The observed graphene-light interaction and nonlinear response are of fundamental interest and open the way for future exploitation in graphene-based optical devices such as phase shifters, modulators, and nanoscale THz sources.

Mucus blocks probiotics but increases penetration of motile pathogens and induces TNF-α and IL-8 secretion.

The mucosal barrier in combination with innate immune system are the first line of defense against luminal bacteria at the intestinal mucosa. Dysfunction of the mucus layer and bacterial infiltration are linked to tissue inflammation and disease. To study host-bacterial interactions at the mucosal interface, we created an experimental model that contains luminal space, a mucus layer, an epithelial layer, and suspended immune cells. Reconstituted porcine small intestinal mucus formed an 880 ± 230 µm thick gel layer and had a porous structure. In the presence of mucus, sevenfold less probiotic and nonmotile VSL#3 bacteria transmigrated across the epithelial barrier compared to no mucus. The higher bacterial transmigration caused immune cell differentiation and increased the concentration of interleukin-8 (IL-8) and tumor necrosis factor-alpha (TNF-α; p < .01). Surprisingly, the mucus layer increased transmigration of pathogenic Salmonella and increased secretion of TNF-α and IL-8 (p < .05). Nonmotile, flagella knockout Salmonella had lower transmigration and caused lower IL-8 and TNF-α secretion (p < .05). These results demonstrate that motility enables pathogenic bacteria to cross the mucus and epithelial layers, which could lead to infection. Using an in vitro coculture platform to understand the interactions of bacteria with the intestinal mucosa has the potential to improve the treatment of intestinal diseases.

Intragenic CpG islands play important roles in bivalent chromatin assembly of developmental genes.

CpG, 5'-C-phosphate-G-3', islands (CGIs) have long been known for their association with enhancers, silencers, and promoters, and for their epigenetic signatures. They are maintained in embryonic stem cells (ESCs) in a poised but inactive state via the formation of bivalent chromatin containing both active and repressive marks. CGIs also occur within coding sequences, where their functional role has remained obscure. Intragenic CGIs (iCGIs) are largely absent from housekeeping genes, but they are found in all genes associated with organ development and cell lineage control. In this paper, we investigated the epigenetic status of iCGIs and found that they too reside in bivalent chromatin in ESCs. Cell type-specific DNA methylation of iCGIs in differentiated cells was linked to the loss of both the H3K4me3 and H3K27me3 marks, and disruption of physical interaction with promoter regions, resulting in transcriptional activation of key regulators of differentiation such as PAXs, HOXs, and WNTs. The differential epigenetic modification of iCGIs appears to be mediated by cell type-specific transcription factors distinct from those bound by promoter, and these transcription factors may be involved in the hypermethylation of iCGIs upon cell differentiation. iCGIs thus play a key role in the cell type-specific regulation of transcription.

Lingual Application of Pre-Bent Reconstruction Plate for Segmental Mandibular Defect: Easy and Accurate Method Through the Buccal Drilling Approach Using Computer-Aided Design/Computer-Aided Manufacturing Surgical Guides.

To prevent or treat for complications of reconstruction plate, such as metal plate fracture, plate exposure, and formation of skin fistula, the use of reconstruction plates on the mandibular lingual aspect has been introduced. However, this method increases the difficulty of surgery and lengthens the surgery time. In this study, the authors aimed to present a method to apply for reconstruction plates on the lingual side of the mandible to overcome the complications associated with the use of these plates. In the proposed method, the reconstruction plate was bent and fixed by a specially designed screws on a three-dimensional model created through a pre-operative virtual surgical simulation. Next, the model, prebent reconstruction plant, and screw were 3-dimensionally scanned and then superimposed precisely onto the three-dimensional model generated through the virtual surgical simulation. After extracting the three-dimensional path of the screws on the superimposed model, a surgical guide was prepared to drill screw holes in the buccal side of the mandible by transferring the extracted paths. The proposed surgical method using virtual surgical planning and surgical guides makes mandibular lingual application of the prebent reconstruction plates convenient, fast, and precise through drilling in the buccal side of the mandible.

Parametric Study of Bolt Clamping Effect on Resonance Characteristics of Langevin Transducers with Lumped Circuit Models.

We recently proposed a numerical model using equivalent circuit models to analyze the resonance characteristics of Langevin transducers and design them in a systematic manner. However, no pre-load torque biased by a metal bolt was considered in the model. Here, a parametric study is, therefore, carried out to reveal how model parameters are adapted to incorporate the pre-compression effect into our existing model. Analytical results are compared with corresponding experimental data, particularly regarding the input electrical impedance and effective electromechanical coupling coefficient for the transducer at resonance modes. The frequency response of input impedance is presented as a function of torque, both theoretically and experimentally. For 10.0 N·m bias, for instance, both resonance and anti-resonance frequencies are calculated as 38.64 kHz and 39.78 kHz, while these are measured as 38.62 kHz and 39.77 kHz by the impedance analyzer. The impedance difference between these cases is 14 Ω at resonance and 9 kΩ at anti-resonance, while the coupling coefficients in both cases become 0.238 and 0.239, respectively. Hence, these test results are closely matched with their theoretical values. Consequently, this study provides a quantitative guideline that specifies the pre-loading condition of bolt clamps with proper parameter settings to predict the intended resonance characteristics of Langevin transducers.

Large and Reconfigurable Infrared Photothermoelectric Effect at Oxide Interfaces.

To maximize the photovoltaic efficiency, it is highly desirable to enable the electricity conversion from low energy photons and to extract the excessive energy from hot carriers. Here we report a large photovoltage generation at the LaAlO3/SrTiO3 interfaces from infrared photons with energies far below the oxide bandgaps. This effect is a result of the photoexcitation of hot carriers in metasurface electrical contacts and the subsequent thermoelectric charge separations by the interfacial two-dimensional electron gas (2DEG). Reaching a room-temperature responsivity of 4.4 V/W, such light-to-charge conversion can be spatially controlled and reconfigured through the patterning of 2DEG using conducting atomic force microscope. Compatible for broadband applications, our results demonstrate a new path toward efficient and programmable light sensing using oxide-based low-dimensional electron systems.

Validation of a three-dimensional printed model for training of surgical extraction of supernumerary teeth.

INTRODUCTION: This study aimed to validate a three-dimensional (3D) printed model to provide training for supernumerary teeth (SNTs) extraction. MATERIALS AND METHODS: Each of the 30 participants, grouped as experienced and without experience, conducted two identically simulated surgeries on a 3D-printed replica of human mixed dentition with a SNT. The surgery time, area of bony window and volume of removed material were measured; subsequently, responses to a five-item questionnaire were recorded. The collected data were statistically analysed. RESULTS: The surgery time was 228.37 ± 141.53 seconds and 125.47 ± 53.03 seconds in the first and second surgery, respectively. The training significantly decreased the surgery time in the participants without experience (P = .000). However, there were no significant differences in the area of window opening (P = .271) and volume of removed material between the two surgeries (P = .075). The participants who perceived educational benefits accounted for more than 60% of the respondents for every question. Participants without experience in SNT extraction showed a tendency to rate a higher score than did those with experience. CONCLUSIONS: A 3D-printed model for surgical extraction of a SNT can improve surgical skill and, especially, shorten the learning curve in beginners.

GIFT: Guided and Interpretable Factorization for Tensors with an application to large-scale multi-platform cancer analysis.

Motivation: Given multi-platform genome data with prior knowledge of functional gene sets, how can we extract interpretable latent relationships between patients and genes? More specifically, how can we devise a tensor factorization method which produces an interpretable gene factor matrix based on functional gene set information while maintaining the decomposition quality and speed? Results: We propose GIFT, a Guided and Interpretable Factorization for Tensors. GIFT provides interpretable factor matrices by encoding prior knowledge as a regularization term in its objective function. We apply GIFT to the PanCan12 dataset (TCGA multi-platform genome data) and compare the performance with P-Tucker, our baseline method without prior knowledge constraint, and Silenced-TF, our naive interpretable method. Results show that GIFT produces interpretable factorizations with high scalability and accuracy. Furthermore, we demonstrate how results of GIFT can be used to reveal significant relations between (cancer, gene sets, genes) and validate the findings based on literature evidence. Availability and implementation: The code and datasets used in the paper are available at https://github.com/leesael/GIFT. Supplementary information: Supplementary data are available at Bioinformatics online.

Comparison of Computed Tomography, Magnetic Resonance Imaging, and Positron Emission Tomography and Computed Tomography for the Evaluation Bone Invasion in Upper and Lower Gingival Cancers.

PURPOSE: Preoperative detection of bone invasion is important in cases of gingival cancer. The aim of this study was to compare the diagnostic value of 3 imaging methods for the detection of bone invasion in upper and lower gingival cancer: computed tomography (CT), magnetic resonance imaging (MRI), and positron emission tomography (PET) and CT. MATERIALS AND METHODS: This retrospective cohort study enrolled patients who underwent a maxillectomy or a mandibulectomy for gingival cancer. Each preoperative image (CT, MRI, or PET/CT) was reviewed for the presence of bone invasion, and the possibility for bone invasion was graded. These results were verified with pathology reports. Sensitivity, specificity, positive predictive value, and negative predictive value for the detection of mandibular involvement in alveolar bone were calculated, and a receiver operating characteristics (ROC) curve analysis was performed. RESULTS: Forty patients (27 men and 13 women) were enrolled. Pathologic examination disclosed bone invasion in 25 of the 40 patients. Of these patients, 13 had maxillary and 12 had mandibular alveolus involvement. The diagnostic accuracy of CT (90.0%) was highest among the 3 modalities for the detection of bone invasion. In the ROC curve analysis, values for the area under the curve for upper gingival cancer were lower than those for lower gingival cancer. CONCLUSIONS: The 3 imaging methods were less sensitive for the detection of bone invasion in upper gingival cancer than in lower gingival cancer. Cases of upper gingival cancer should be evaluated more carefully for bone invasion before surgery.

Effects of laser-assisted thinning versus opening on clinical outcomes according to maternal age in patients with repeated implantation failure.

Laser-assisted thinning (LAT) and laser-assisted opening (LAO) are performed as part of human in vitro fertilization (IVF) to increase the implantation rate in patients with a poor prognosis and in cases of repeated implantation failure. However, an insufficient number of studies have directly compared LAT and LAO using the same methods. Therefore, we compared the effects of LAT and LAO on clinical outcomes according to maternal age in patients with repeated implantation failure. This retrospective study was performed in 509 IVF cycles (458 patients). The cycles were divided based on maternal age and the method used (< 38 years LAT, n = 119 vs. LAO, n = 179 and ≥ 38 years LAT, n = 72 vs. LAO, n = 139). Cleavage-stage embryos before transfer were either thinned or opened using a 1.46-µm noncontact diode laser. We compared the implantation rates and pregnancy outcomes of cycles between LAT and LAO according to maternal age. The characteristics of patients did not differ significantly among the groups (p > 0.05), with the exception of mixed factor infertility, which was more common in the LAT group than in the LAO group among patients < 38 years of age (10.1% vs. 2.8%, p = 0.008). The LAT and LAO groups showed similar rates of biochemical pregnancy, clinical pregnancy, ongoing pregnancy, abortion, implantation, singleton pregnancy, and twin pregnancy (p > 0.05). In conclusion, LAT and LAO had similar clinical outcomes. Therefore, we did not find any evidence that LAT is superior to LAO. In fact, the patients ≥ 38 years of age who underwent LAO tended to have a lower abortion rate. Further study is necessary to confirm these results in a larger population.

Tunneling Hot Spots in Ferroelectric SrTiO3.

Strontium titanate (SrTiO3) is the "silicon" in the emerging field of oxide electronics. While bulk properties of this material have been studied for decades, new unexpected phenomena have recently been discovered at the nanoscale, when SrTiO3 forms an ultrathin film or an atomically sharp interface with other materials. One of the striking discoveries is room-temperature ferroelectricity in strain-free ultrathin films of SrTiO3 driven by the TiSr antisite defects, which generate a local dipole moment polarizing the surrounding nanoregion. Here, we demonstrate that these polar defects are not only responsible for ferroelectricity, but also propel the appearance of highly conductive channels, "hot spots", in the ultrathin SrTiO3 films. Using a combination of scanning probe microscopy experimental studies and theoretical modeling, we show that the hot spots emerge due to resonant tunneling through localized electronic states created by the polar defects and that the tunneling conductance of the hot spots is controlled by ferroelectric polarization. Our finding of the polarization-controlled defect-assisted tunneling reveals a new mechanism of resistive switching in oxide heterostructures and may have technological implications for ferroelectric tunnel junctions. It is also shown that the conductivity of the hot spots can be modulated by mechanical stress, opening a possibility for development of conceptually new electronic devices with mechanically tunable resistive states.

Quantized Ballistic Transport of Electrons and Electron Pairs in LaAlO3/SrTiO3 Nanowires.

SrTiO3-based heterointerfaces support quasi-two-dimensional (2D) electron systems that are analogous to III-V semiconductor heterostructures, but also possess superconducting, magnetic, spintronic, ferroelectric, and ferroelastic degrees of freedom. Despite these rich properties, the relatively low mobilities of 2D complex-oxide interfaces appear to preclude ballistic transport in 1D. Here we show that the 2D LaAlO3/SrTiO3 interface can support quantized ballistic transport of electrons and (nonsuperconducting) electron pairs within quasi-1D structures that are created using a well-established conductive atomic-force microscope (c-AFM) lithography technique. The nature of transport ranges from truly single-mode (1D) to three-dimensional (3D), depending on the applied magnetic field and gate voltage. Quantization of the lowest e2/ h plateau indicate a ballistic mean-free path lMF ∼ 20 µm, more than 2 orders of magnitude larger than for 2D LaAlO3/SrTiO3 heterostructures. Nonsuperconducting electron pairs are found to be stable in magnetic fields as high as B = 11 T and propagate ballistically with conductance quantized at 2 e2/ h. Theories of one-dimensional (1D) transport of interacting electron systems depend crucially on the sign of the electron-electron interaction, which may help explain the highly ballistic transport behavior. The 1D geometry yields new insights into the electronic structure of the LaAlO3/SrTiO3 system and offers a new platform for the study of strongly interacting 1D electronic systems.