Retention efficacy and patient experience with customized clear retainer and wrap-around circumferential retainer among non-extraction orthodontic patients: A 12-month follow-up cohort study.

OBJECTIVE: The aim of this study was to evaluate retention efficacy by assessing retention stability and patient perspectives according to type of circumferential retainer: the wrap-around circumferential retainer (WCR) and customized clear retainer (CCR). MATERIALS AND METHODS: This cohort follow-up study involved 52 patients aged 18-62 who underwent fixed-appliance orthodontic treatment without extractions or orthognathic surgery. Following screening consenting participants were divided into WCR and CCR groups. All participants before follow-up received fixed retainers for the upper and lower anteriors and respective removable retainers within 2 weeks post-debond. Intraoral scans and lateral cephalograms were taken immediately after debonding (T0) and again 12 months later. Dentoalveolar changes in several measurements were compared to evaluate retention efficacy. Surveys were conducted at 1 month (T1) and 12 months (T2) post-debonding to assess changes in patient experiences. Outcome assessments were blinded. Paired T-tests and independent T-tests were used for intragroup and intergroup comparisons of dentoalveolar measurements, respectively. Survey responses were analysed using the Pearson Chi-Square test. RESULTS: The final assessment included 32 participants. Model analysis revealed no significant differences between the groups, except for maxillary intermolar width (p = .033). In the WCR group, the cephalometric analysis indicated a significant increase in the incisor mandibular plane angle (p = .002) and a decrease in the interincisal angle (p = .014), while changes in the CCR group were statistically non-significant. Patient attitude evaluation showed similar trends for wear time and overall satisfaction. However, a higher percentage of respondents in the WCR group reported irritation when wearing the retainers (p = .037) at T1 and discomfort related to speech (p = .038) at T2. CONCLUSIONS: CCR showed better retention efficacy in terms of lower incisor inclination. Patients experienced relatively less irritation and speech discomfort with CCRs.

Forced eruption in impacted teeth: analysis of failed cases and outcome of re-operation.

BACKGROUND: Forced eruption of an impacted tooth usually requires surgical and orthodontic interventions to successfully bring the tooth into the dental arch. The clinical time required for a forced eruption is difficult to predict before treatment begins and success rates are affected by several factors before and after an eruption. This study was conducted to identify factors that affect the success of forced eruption, the duration of orthodontic treatment of impacted teeth, and the reasons for re-operation and forced eruption failure in a various teeth and cases. METHODS: In this retrospective study, the records regarding the forced eruption of 468 teeth in 371 patients from June 2006 to May 2020 at the Advanced General Dentistry Department of Yonsei University Dental Hospital were initially examined. The records of 214 teeth in 178 patients who completed orthodontic treatment were included in the analysis. Data on patient demographics, tooth characteristics, orthodontic treatment duration, re-operations, and failures were collected from electronic medical records. RESULTS: There was a significant difference in age between the success and failure forced eruption. Factors significantly affecting treatment duration were apex formation, position, rotation, and re-operation. Re-operation had a 96% success rate. The average orthodontic treatment duration was 29.99 ± 16.93 months, but the average orthodontic treatment duration for teeth that undergone re-operation was 20.36 ± 11.05 months, which was approximately 9 months shorter. Additionally, there was an interaction effect between rotation and re-operation on the duration of orthodontic treatment. The causes for failure of forced eruption in 6 cases were ankyloses (3 cases), incomplete alignment with the normal dental arch (2 cases), and a significant deviation in the impacted tooth's location (1 case). CONCLUSIONS: To increase the success rate of forced eruption, age should be considered as a priority, and in order to predict the treatment period, the apex formation status, position in the arch, and rotation should be considered in addition to age. When determining re-operation, considering factors such as ankylosis, root curvature, and apex formation can help in the success of orthodontic treatment.

Enhancing biofilm resistance and preserving optical translucency of 3D printed clear aligners through carboxybetaine-copolymer surface treatment.

OBJECTIVES: This study aimed to use a carboxybetaine methacrylate (CBMA) copolymer solution to surface treat 3D printed clear aligners at different fabrication stages, to impart antifouling properties, and assess the surface treatment at various fabrication stages' impact on physico-mechanical characteristics. METHODS: Surface treatments using a blend of 2-hydroxyethyl methacrylate (HEMA) and CBMA, termed CCS, were performed at various stages of 3D printed clear aligner fabrication. Experimental groups, CB1, CB2, and CB3, were determined by the stage of surface treatment during post-processing. CB1, CB2, and CB3 received treatment before post-curing, after post-curing, and after post-processing, respectively. Untreated samples served as controls. Physical and mechanical properties were assessed through tensile testing, Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and UV-Vis spectroscopy. The surface was further characterized through scanning electron microscopy and contact angle measurements. The cytotoxicity was assessed with 7-day elution and agar diffusion assays. Lastly, bacterial biofilm resistance was evaluated using confocal laser scanning microscopy. Crystal violet assay was performed using Streptococcus mutans. RESULTS: Surface treatment during CB1 stage exerted the most significantly unfavorable influence on properties of the 3D printed aligner resin. CB2 samples showed the maximum preservation of translucency even after 7-day aging. CB2 and CB3 phases showed enhanced hydrophilicity of sample surfaces with reduced adhesion of multispecies biofilm and S. mutans. SIGNIFICANCE: Application of CCS surface treatment immediately after post-curing (CB2) can enhance the biofilm resistance of 3D printed clear aligners while maintaining high fidelity to optical translucency and constituent mechanical properties.

Evaluation of the effects of temperature and centrifugation time on elimination of uncured resin from 3D-printed dental aligners.

The study investigated the effects of temperature and centrifugation time on the efficacy of removing uncured resin from 3D-printed clear aligners. Using a photo-polymerizable polyurethane resin (Tera Harz TC-85, Graphy Inc., Seoul, Korea), aligners were printed and subjected to cleaning processes using isopropyl alcohol (IPA) or centrifugation (g-force 27.95g) at room temperature (RT, 23 °C) and high temperature (HT, 55 °C) for 2, 4, and 6 min. The control group received no treatment (NT). Cleaning efficiency was assessed through rheological analysis, weight measurement, transparency evaluation, SEM imaging, 3D geometry evaluation, stress relaxation, and cell viability tests. Results showed increased temperature and longer centrifugation times significantly reduced aligner viscosity, weight (P < 0.05), and transmittance. IPA-cleaned aligners exhibited significantly lower transparency and rougher surfaces in SEM images. All groups met ISO biocompatibility standards in cytotoxicity tests. The NT group had higher root mean square (RMS) values, indicating greater deviation from the original design. Stress relaxation tests revealed over 95% recovery in all groups after 60 min. The findings suggest that a 2-min HT centrifugation process effectively removes uncured resin without significantly impacting the aligners' physical and optical properties, making it a clinically viable option.

A novel zwitterion incorporated Nano-crystalline ceramic and polymer for bacterial resistant dental CAD-CAM block.

OBJECTIVES: To create bacteria-resistant dental CAD-CAM blocks with a biofilm-resistant effect by incorporating Nano-crystalline ceramic and polymer (NCP) with 2-methacryloyloxyethyl phosphorylcholine (MPC) and sulfobetaine methacrylate (SBMA) and at an equimolar ratio, referred to as MS. METHODS: Experimental groups comprised NCP blocks containing zwitterions at 0.15wt% (MS015) and 0.45wt% (MS045). NCP blocks without MS served as control (CTRL). Flexural strength, surface hardness, water sorption and solubility, photometric properties, and cytotoxicity were assessed for all samples. Additionally, the resistance to single and multi-species bacterial adhesion was investigated. RESULTS: MS045 showed significant reduction in flexural strength (P < 0.01) compared to both CTRL and MS015. Both MS015 and MS045 showed significantly increased water sorption and significant reduction in water solubility compared to CTRL. Light transmission remained consistent across all MS content levels, but the irradiance value decreased by 12 % in the MS045 group compared to the MS015 group. Notably, compared to the CTRL group, the MS015 group exhibited enhanced resistance to adhesion by Porphyromonas gingivalis and a multi-species salivary biofilm, with biofilm thickness and biomass reduced by 45 % and 56 %, respectively. CONCLUSIONS: NCP containing 0.15 % MS can effectively reduce adhesion of multiple species of bacteria while maintaining physical and mechanical properties. CLINICAL SIGNIFICANCE: NCP integrating zwitterions is clinically advantageous in resisting bacterial adhesion at internal and external margins of milled indirect restoration.

Miniscrew-assisted rapid palatal expansion for managing arch perimeter in an adult patient

ABSTRACT Introduction: Etiology of dental crowding may be related to arch constriction in diverse dimensions, and an appropriate manipulation of arch perimeter by intervening in basal bone discrepancies cases, may be a key for crowding relief, especially when incisors movement is limited due to underlying pathology, periodontal issues or restrictions related to soft tissue profile. Objectives: This case report illustrates a 24-year old woman, with maxillary transverse deficiency, upper and lower arches crowding, Class II, division 1, subdivision right relationship, previous upper incisors traumatic episode and straight profile. A non-surgical and non-extraction treatment approach was feasible due to the miniscrew-assisted rapid palatal expansion technique (MARPE). Methods: The MARPE appliance consisted of a conventional Hyrax expander supported by four orthodontic miniscrews. A slow expansion protocol was adopted, with an overall of 40 days of activation and a 3-month retention period. Intrusive traction miniscrew-anchored mechanics were used for correcting the Class II subdivision relationship, managing lower arch perimeter and midline deviation before including the upper central incisors. Results: Post-treatment records show an intermolar width increase of 5 mm, bilateral Class I molar and canine relationships, upper and lower crowding resolution, coincident dental midlines and proper intercuspation. Conclusions: The MARPE is an effective treatment approach for managing arch-perimeter deficiencies related to maxillary transverse discrepancies in adult patients.

RESUMO Introdução: a etiologia do apinhamento dentário pode estar relacionada à constrição das arcadas dentárias em diversas dimensões, e a manipulação apropriada do perímetro da arcada, por meio da intervenção em casos de discrepâncias de base óssea, pode ser o fator chave para a dissolução do apinhamento, especialmente em casos onde a movimentação de incisivos é limitada em decorrência de problemas periodontais ou restrições relacionadas ao perfil facial. Objetivos: o presente relato de caso ilustra uma paciente de 24 anos de idade, com deficiência transversa de maxila, apinhamento das arcadas superior e inferior, má oclusão de Classe II, 1a divisão, subdivisão direita, incisivos superiores previamente traumatizados e perfil reto. A abordagem de tratamento não-cirúrgica e sem extrações foi viável devido à técnica de expansão rápida da maxila assistida por mini-implantes (MARPE, do inglês miniscrew-assisted rapid palatal expansion). Métodos: o dispositivo MARPE foi confeccionado a partir de um expansor Hyrax convencional apoiado em quatro mini-implantes. Foi adotado o protocolo de expansão lenta, com um período total de ativações de 40 dias e 3 meses de contenção. Uma mecânica de tração intrusiva apoiada em mini-implantes foi utilizada para a correção da relação de Classe II subdivisão direita, adequação do perímetro da arcada inferior e correção do desvio da linha média antes da inclusão dos incisivos centrais superiores. Resultados: os registros pós-tratamento demonstraram o aumento de 5,0 mm na distância intermolares, relação bilateral de Classe I de molares e caninos, resolução do apinhamento superior e inferior, linhas médias dentárias coincidentes e intercuspidação adequada. Conclusões: a técnica MARPE é uma abordagem de tratamento efetiva para a resolução da deficiência de perímetro das arcadas dentárias relacionada à discrepância maxilar transversa em pacientes adultos.