RESUMO
SMC condensin complexes are central modulators of chromosome superstructure in all branches of life. Their SMC subunits form a long intramolecular coiled coil, which connects a constitutive "hinge" dimerization domain with an ATP-regulated "head" dimerization module. Here, we address the structural arrangement of the long coiled coils in SMC complexes. We unequivocally show that prokaryotic Smc-ScpAB, eukaryotic condensin, and possibly also cohesin form rod-like structures, with their coiled coils being closely juxtaposed and accurately anchored to the hinge. Upon ATP-induced binding of DNA to the hinge, however, Smc switches to a more open configuration. Our data suggest that a long-distance structural transition is transmitted from the Smc head domains to regulate Smc-ScpAB's association with DNA. These findings uncover a conserved architectural theme in SMC complexes, provide a mechanistic basis for Smc's dynamic engagement with chromosomes, and offer a molecular explanation for defects in Cornelia de Lange syndrome.
Assuntos
Proteínas de Bactérias/ultraestrutura , Proteínas de Ciclo Celular/ultraestrutura , DNA Bacteriano/química , Pyrococcus furiosus , Sequência de Aminoácidos , Proteínas de Bactérias/química , Proteínas de Ciclo Celular/química , Cristalografia por Raios X , Modelos Moleculares , Dados de Sequência Molecular , Ligação Proteica , Domínios e Motivos de Interação entre Proteínas , Multimerização Proteica , Estrutura Secundária de ProteínaRESUMO
INTRODUCTION: The purpose of this study was to assess speech perturbation and adaptation for patients wearing modified C-palatal plates (MCPPs) over time. METHODS: The sample consisted of 40 patients, 20 wearing MCPPs as the experimental group (age: 20.7 ± 5.8 years) and 20 patients wearing a transpalatal arch (TPA) as the control group (age: 21.5 ± 6.4 years). The sounds /t/, /d/, /s/, /n/, /r/, /tÊ/. and /j/ were recorded for each patient at six time points: immediately before (T0) and after (T1) appliance placement; then 1, 2, 3 and 4 weeks after placement (T2-T5). Acoustic analysis of pitch and voice onset time (VOT) was performed by Praat software. Repeated measures analysis of variance (RM-ANOVA) was used to assess changes in the pitch and VOT over time and the difference between the appliances. RESULTS: With the MCPP appliance, /n/, /r/, /tÊ/ and /j/ decreased in VOT starting in the first week while /t/ and /s/ almost returned to pre-treatment levels after 2 weeks. VOT for the /d/ sound did not change between T0 and T3, but it decreased after 3 weeks. There were no significant differences in pitch and VOT between the two groups at any time point. CONCLUSIONS: Wearing an MCPP device caused patients to initially distort the articulation of several sounds, but the distortion dissipated within 1 to 2 weeks. It is recommended that patients and/or their parents be advised during pre-treatment counselling of the possibility of temporary speech changes with MCPP placement.
Assuntos
Acústica , Fala , Humanos , Adolescente , Adulto Jovem , AdultoRESUMO
OBJECTIVES: This retrospective study aims to compare long-term stability between the mandibular setback surgery-early (MSE) approach, involving minimal orthodontics, and the mandibular setback conventional surgery (MCS) approach, involving sufficient orthodontics, in Class III patients with mandibular prognathism. METHODS: Among 210 patients who underwent orthognathic surgery, a total of 40 subjects were enrolled based on standardized inclusion criteria: only mandibular surgery, <5 mm setback difference between right and left of the mandible, orthodontics with fixed appliances, and more than 2 years of follow-up after treatment. These patients were allocated to the MSE (n = 20) and MCS groups (n = 20) according to the duration of presurgical orthodontics. Changes in cephalometric measurements were compared between the MSE and MCS groups before surgery (T0), 1 month after surgery (T1), at the end of treatment (T2), and posttreatment retention (T3). RESULTS: The MSE and MCS groups had a mean presurgical orthodontic duration of 2 and 9.5 months, respectively. From T1 to T2, the MSE group showed a significantly larger forward movement of the mandible than the MCS group (2.1 versus 0.7 mm; P < 0.001). In addition, from T2 to T3 (average 4.6 years), the MSE group presented anterior relapse of 0.6 mm in the mandible, but there were no statistically significant intergroup differences. CONCLUSION: Although the MSE group showed greater postsurgical forward mandibular relapse than the MCS group, the two groups exhibited similar skeletal and dental stability during the posttreatment retention.
Assuntos
Má Oclusão Classe III de Angle , Maxila , Humanos , Seguimentos , Estudos Retrospectivos , Resultado do Tratamento , Maxila/cirurgia , Má Oclusão Classe III de Angle/cirurgia , Mandíbula/cirurgia , Cefalometria , RecidivaRESUMO
Molecular emitters simultaneously generating light at different wavelengths have wide applications. With a small molecule, however, it is challenging to realize two independent radiative pathways. We invented the first examples of dual-emissive single-benzene fluorophores (SBFs). Two emissive tautomers are generated by synthetic modulation of the hydrogen bond acidity, which opens up pathways for excited-state proton transfer. White light is produced by a delicate balance between the energy and intensity of the emission from each tautomer. We show that the excited-state antiaromaticity of the benzene core itself dictates the proton movements driving the tautomer equilibrium. Using this simple benzene platform, a fluorinated SBF was synthesized with a record high solubility in perfluorocarbon solvents. White light-emitting devices and multicolor imaging of perfluorocarbon nanodroplets in live cells demonstrate the practical utility of these molecules.
RESUMO
Z-DNA, a noncanonical helical structure of double-stranded DNA (dsDNA), plays pivotal roles in various biological processes, including transcription regulation. Mechanical stresses on dsDNA, such as twisting and stretching, help to form Z-DNA. However, the effect of DNA bending, one of the most common dsDNA deformations, on Z-DNA formation is utterly unknown. Here, we show that DNA bending induces the formation of Z-DNA, that is, more Z-DNA is formed as the bending force becomes stronger. We regulated the bending force on dsDNA by using D-shaped DNA nanostructures. The B-Z transition was observed by single-molecule fluorescence resonance energy transfer. We found that as the bending force became stronger, Z-DNA was formed at lower Mg2+ concentrations. When dsDNA contained cytosine methylations, the B-Z transition occurred at 78 mM Mg2+ (midpoint) in the absence of the bending force. However, the B-Z transition occurred at a 28-fold lower Mg2+ concentration (2.8 mM) in the presence of the bending force. Monte Carlo simulation suggested that the B-Z transition stabilizes the bent form via the formation of the B-Z junction with base extrusion, which effectively releases the bending stress on DNA. Our results clearly show that the bending force facilitates the B-Z transition under physiological salt conditions.
Assuntos
DNA Forma Z , DNA/química , Replicação do DNA , Fenômenos Mecânicos , Conformação de Ácido NucleicoRESUMO
INTRODUCTION: The purpose of this study was to evaluate the effects of a triangular-shaped corticotomy on the protraction of second and third molars in patients with missing mandibular first molars. SUBJECTS AND METHODS: The corticotomy and non-corticotomy groups consisted of sixteen first molars in fifteen patients (28.6 ± 9.4 years) and nineteen first molars in fifteen patients (26.6 ± 8.4 years), respectively. A triangular-shaped corticotomy was performed between the second premolar and molar. Temporary skeletal anchorage devices (TSADs) were placed between the first and second premolars in both groups. Mandibular dentition variables were measured on the pre and post-treatment panoramic radiographs and lateral cephalograms. Analysis of covariance was performed. RESULTS: The corticotomy group exhibited 2.8 mm more inter-radicular correction between the second molar to second premolar roots (P < .001) and 1.6 mm more inter-radicular distance correction between the third molar to second premolar roots compared to the non-corticotomy group (P < .01). The corticotomy group required 5.5 months less treatment time for space closure (P < .05), but the total treatment time was the same for both groups. CONCLUSIONS: The inter-radicular distance between the mandibular second premolar and molar and treatment times for space closure was significantly reduced in the corticotomy group.
Assuntos
Mandíbula , Dente Molar , Dente Pré-Molar/cirurgia , Humanos , Mandíbula/cirurgia , Dente Molar/cirurgia , Dente Serotino/cirurgia , Radiografia PanorâmicaRESUMO
INTRODUCTION: This study aimed to compare the skeletodental and soft tissue changes with total arch distalization using a modified C-palatal plate (MCPP) and maxillary first premolar extraction treatment in Class II malocclusion patients with severe overjet. SETTING AND SAMPLE POPULATION: The sample consisted of 46 adult patients who had Class II Division 1 malocclusion with severe overjet; 25 of them received non-extraction treatment with MCPPs (age, 22.5 ± 7.2 years), and 21 received maxillary first premolar extraction treatment (age 23.4 ± 6.5 years). METHOD: A total of 26 variables were measured on pre- and post-treatment lateral cephalograms. To evaluate the differences between pretreatment and post-treatment in each group, t tests and Wilcoxon rank-sum tests were used. To compare the amount of change between the two groups, MANOVA test was used. RESULTS: The overjet was significantly reduced in the MCPP and extraction groups by 4.8 mm and 5.4 mm, respectively. However, the two groups had no significant difference in the sagittal, vertical and angular changes of the maxillary incisors. In addition, regarding soft tissue changes, the MCPP and extraction groups showed an increased nasolabial angle of 7.5° and 9.4°, decreased upper lip to the true vertical line of 1.8 mm and 2.2 mm, respectively (P < .001). CONCLUSIONS: There was no significant difference in the skeletal changes between the MCPP and extraction groups, and the reduction in overjet was similar in the groups. These results suggest that MCPP might be a viable treatment option for total arch distalization in Class II malocclusion patients with severe overjet.
Assuntos
Má Oclusão Classe II de Angle , Sobremordida , Adolescente , Adulto , Dente Pré-Molar/cirurgia , Cefalometria , Humanos , Má Oclusão Classe II de Angle/terapia , Maxila , Sobremordida/terapia , Técnicas de Movimentação Dentária , Adulto JovemRESUMO
INTRODUCTION: This study aimed to evaluate the dentoskeletal and soft-tissue changes after molar distalization using modified C-palatal plates in patients with severe maxillomandibular arch length discrepancies. METHODS: Twenty-four patients with Class I and II malocclusion (19.0 ± 7.3 years; 17 females and 8 males), who had severe maxillary crowding of >10 mm, and moderate mandibular crowding of >6 mm, underwent molar distalization using modified C-palatal plates and buccal miniscrews with approximately 300 g of force per side. Models were made, and cephalograms were taken before and after treatment. Cephalometric variables and arch dimensions were measured. Paired t test and Wilcoxon rank sum test were used for statistical analysis. RESULTS: In the maxillary dentition, an average of 12.4 mm of crowding was resolved by molar distalization of 4.4 mm, interproximal stripping of 0.7 mm, and arch expansion. In the mandibular dentition, crowding of 6.7 mm was alleviated by molar distalization of 2.4 mm, an interproximal of 1.5 mm, and additional arch expansion. The incisor positions were maintained (SN-U1, 101.3°; IMPA, 88.8°), and soft-tissue profiles were improved (LL/E-line -1.1 mm; P < 0.001) after treatment. CONCLUSIONS: Maxillary and mandibular tooth-size arch length discrepancy of 12.4 mm and 6.7 mm, respectively, were resolved by molar distalization, interproximal reduction, and arch expansion, whereas incisor positions were maintained, and soft-tissue profiles were improved. This could be a viable treatment option in patients with moderate-to-severe crowding.
Assuntos
Má Oclusão Classe II de Angle , Má Oclusão , Masculino , Feminino , Humanos , Má Oclusão Classe II de Angle/diagnóstico por imagem , Má Oclusão Classe II de Angle/cirurgia , Técnicas de Movimentação Dentária , Cefalometria/métodos , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgia , Maxila/diagnóstico por imagem , Maxila/cirurgiaRESUMO
INTRODUCTION: Evaluate the treatment effects of maxillary protraction using palatal plates and compare them to those with conventional tooth-borne anchorage in growing patients with Class III malocclusion. METHODS: Forty patients were divided into 2 groups according to the type of anchorage used: group 1 (n = 20; mean age, 10.5 ± 1.6 years; palatal plates) and group 2 (n = 20; mean age, 10.0 ± 1.2 years; tooth-borne appliances). Lateral cephalograms were taken before and after maxillary protraction. Skeletal, dental, and soft-tissue variables were measured. For statistical analysis, paired and independent t tests were performed. RESULTS: Group 1 showed maxilla advancement by 2.3 ± 1.0 mm compared with group 2 by 0.9 ± 0.6 mm, and group 2 indicated clockwise rotation of the mandible, but there was no such clockwise rotation in group 1 (P <0.001). Group 1 had a less lingual inclination of the mandibular incisors than group 2 (IMPA, -1.0 ± 3.8° vs -3.8 ± 2.8°; P <0.05). There was no difference in soft-tissue changes between the 2 groups. CONCLUSIONS: A facemask with palatal plate induced maxillary advancement with less mandibular clockwise rotation and dental movement than conventional tooth-borne anchorage. This modality can be used efficiently for maxillary protraction in growing patients with Class III malocclusion.
Assuntos
Má Oclusão Classe III de Angle , Procedimentos de Ancoragem Ortodôntica , Cefalometria , Criança , Aparelhos de Tração Extrabucal , Humanos , Má Oclusão Classe III de Angle/terapia , Maxila , Técnica de Expansão PalatinaRESUMO
INTRODUCTION: This study aimed to compare treatment effects after total mandibular arch distalization with buccal interradicular miniscrews vs ramal plates in patients with Class III malocclusion. METHODS: The sample consisted of 40 patients with Class III malocclusion; 20 were treated with distalization via buccal miniscrews (age, 25.8 ± 7.9 years), whereas 20 were treated with ramal plates (age, 26.4 ± 6.1 years). Twenty-three linear and angular measurements were analyzed on pretreatment and posttreatment lateral cephalograms. The changes in each group and differences in treatment effects between the 2 groups were evaluated. RESULTS: The mean amount of distalization at the crown and root levels of the mandibular first molars and the amount of distal tipping was 1.8 mm, 0.6 mm, and 5.4° in the buccal miniscrew group vs 3.6 mm, 2.0 mm, and 6.8° in the ramal plate group, respectively. In addition, 2.2° of counterclockwise rotation of the occlusal plane was observed in the buccal miniscrew group after 1.3 mm of molar intrusion (P <0.001). The distal movement of the lower lip was 0.6 mm in the buccal miniscrew group vs 2.3 mm in the ramal plate group. CONCLUSIONS: The buccal miniscrew group showed more molar intrusion and counterclockwise rotation of the occlusal plane than in the ramal plate group. The ramal plate produced more distalization of the mandibular dentition with clockwise rotation of the mandible. Therefore, these results can be useful when selecting the type of temporary skeletal anchorage devices to treat patients with Class III malocclusion, depending on their vertical pattern.
Assuntos
Má Oclusão Classe III de Angle , Má Oclusão Classe II de Angle , Procedimentos de Ancoragem Ortodôntica , Adolescente , Adulto , Cefalometria/métodos , Humanos , Má Oclusão Classe II de Angle/terapia , Má Oclusão Classe III de Angle/terapia , Mandíbula , Maxila , Desenho de Aparelho Ortodôntico , Técnicas de Movimentação Dentária/métodos , Adulto JovemRESUMO
INTRODUCTION: The purpose of this study was to evaluate the treatment effects after molar distalization using modified C-palatal plates in patients with Class II malocclusion with maxillary sinus pneumatization. METHODS: This study consisted of 70 lateral cephalograms derived from cone-beam computerized tomography images of 35 patients with Class II malocclusion (mean age 22.3 ± 7.4 years) who had undergone bilateral total arch distalization of the maxillary dentition using modified C-palatal plates. The samples were divided into 2 groups according to sinus pneumatization; group 1 (n = 40), cephalograms with sinus pneumatization and group 2 (n = 30) cephalograms without sinus pneumatization. Paired t tests and independent-sample t tests were used to compare the changes in each group and between groups. RESULTS: The distal movement of the maxillary first molars was 4.3 mm for group 1 and 3.5 mm for group 2, with the intrusion of 1.4 mm and 2.5 mm, respectively. There was no statistically significant difference between the 2 groups. Group 1 showed 3.5° of distal tipping of the maxillary second molars, which was significantly greater than the 0.2° in group 2 (P <0.05). The total treatment period, including distalization, was 2.2 years for group 1 and 1.9 years for group 2, but the difference was not significant. CONCLUSIONS: There was no significant difference in the amount of distal movement and intrusion of the maxillary first molars between groups 1 and 2. Therefore, these results suggest that regardless of sinus pneumatization, molar distalization using temporary skeletal anchorage devices in Class II patients can be performed as a nonextraction treatment.
Assuntos
Má Oclusão Classe II de Angle , Procedimentos de Ancoragem Ortodôntica , Adolescente , Adulto , Cefalometria/métodos , Humanos , Má Oclusão Classe II de Angle/diagnóstico por imagem , Má Oclusão Classe II de Angle/terapia , Maxila/diagnóstico por imagem , Desenho de Aparelho Ortodôntico , Técnicas de Movimentação Dentária/métodos , Adulto JovemRESUMO
Cyanine (Cy) dyes are among the most useful organic fluorophores that have found a wide range of applications in single-molecule and super-resolution imaging as well as in other biophysical studies. However, recent observations that blueshifted derivatives of Cy dyes are formed via photoconversion have raised concerns as to the potential artifacts in multicolor imaging. Here, we report the mechanism for the photoconversion of Cy5 to Cy3 that occurs upon photoexcitation during fluorescent imaging. Our studies show that the formal C2H2 excision from Cy5 occurs mainly through an intermolecular pathway involving a combination of bond cleavage and reconstitution while unambiguously confirming the identity of the fluorescent photoproduct of Cy5 to be Cy3 using various spectroscopic tools. The carbonyl products generated from singlet oxygen-mediated photooxidation of Cy5 undergo a sequence of carbon-carbon bond-breaking and -forming events to bring about the novel dye-to-dye transformation. We also show that the deletion of a two-methine unit from the polymethine chain, which results in the formation of blueshifted products, commonly occurs in other cyanine dyes, such as Alexa Fluor 647 (AF647) and Cyanine5.5. The formation of a blueshifted congener dye can obscure the multicolor fluorescence imaging, leading to misinterpretation of the data. We demonstrate that the potentially deleterious photoconversion, however, can be exploited to develop a new photoactivation method for high-density single-particle tracking in a living cell without using UV illumination and cell-toxic additives.
Assuntos
Carbocianinas/química , Corantes Fluorescentes/química , Carbocianinas/metabolismo , Carbocianinas/efeitos da radiação , Corantes Fluorescentes/metabolismo , Corantes Fluorescentes/efeitos da radiação , Células HeLa , Humanos , Luz , Modelos Químicos , Oxirredução/efeitos da radiação , Processos Fotoquímicos/efeitos da radiação , Imagem Individual de MoléculaRESUMO
This paper was originally published under standard Springer Nature copyright. As of the date of this correction, the Analysis is available online as an open-access paper with a CC-BY license. No other part of the paper has been changed.
RESUMO
Single-molecule Förster resonance energy transfer (smFRET) is increasingly being used to determine distances, structures, and dynamics of biomolecules in vitro and in vivo. However, generalized protocols and FRET standards to ensure the reproducibility and accuracy of measurements of FRET efficiencies are currently lacking. Here we report the results of a comparative blind study in which 20 labs determined the FRET efficiencies (E) of several dye-labeled DNA duplexes. Using a unified, straightforward method, we obtained FRET efficiencies with s.d. between ±0.02 and ±0.05. We suggest experimental and computational procedures for converting FRET efficiencies into accurate distances, and discuss potential uncertainties in the experiment and the modeling. Our quantitative assessment of the reproducibility of intensity-based smFRET measurements and a unified correction procedure represents an important step toward the validation of distance networks, with the ultimate aim of achieving reliable structural models of biomolecular systems by smFRET-based hybrid methods.
Assuntos
Transferência Ressonante de Energia de Fluorescência/métodos , Laboratórios/normas , Reprodutibilidade dos TestesRESUMO
Interactions between membrane proteins are poorly understood despite their importance in cell signaling and drug development. Here, we present a co-immunoimmobilization assay (Co-II) enabling the direct observation of membrane protein interactions in single living cells that overcomes the limitations of currently prevalent proximity-based indirect methods. Using Co-II, we investigated the transient homodimerizations of epidermal growth factor receptor (EGFR) and beta-2 adrenergic receptor (ß2-AR) in living cells, revealing the differential regulation of these receptors' dimerizations by molecular conformations and microenvironment in a plasma membrane. Co-II should provide a simple, rapid, and robust platform for visualizing both weak and strong protein interactions in the plasma membrane of living cells.
Assuntos
Imunoprecipitação/métodos , Mapeamento de Interação de Proteínas/métodos , Análise de Célula Única/métodos , Linhagem Celular , Membrana Celular/metabolismo , Receptores ErbB/fisiologia , Humanos , Proteínas de Membrana/fisiologia , Ligação Proteica/fisiologia , Receptores Adrenérgicos beta 2/fisiologia , Transdução de SinaisRESUMO
INTRODUCTION: The purpose of this study was to evaluate the long-term position of erupted third molars after maxillary total arch distalization using modified C-palatal plates (MCPPs) in adolescents and to identify factors associated with these positions. SETTING AND SAMPLE POPULATION: Sixty-two third molars (male: 20, female: 42) in Class II patients treated with MCPPs and thirty-nine teeth for the Control group (male: 22, female: 17). MATERIALS AND METHODS: Samples were analyzed using panoramic radiographs taken initially (T0), after treatment (T1) and after >3 years retention (T2). Third molars were classified as downward (Group A, N = 31; males: 12, females: 19) and upward (Group B, N = 31; males: 8, females: 23) based on their vertical position after treatment. Analysis of variance and multiple logistic regression analysis were performed. RESULTS: The vertical position of the third molars of Group A, Group B, and the Control showed a 2.2, 3.5 and 2.7 mm downward movement at T2. However, there was no difference in the amount of third molar eruption among the groups. Regarding factors affecting the vertical distance of the third molar, Age, C8-OP, â 8-OP and D7-T at the initial affected vertical position of the third molars after molar distalization (P < .05). CONCLUSIONS: Group A and B showed no difference in the third molar eruption during retention after total arch distalization. This study suggests that it might be unnecessary to extract the developing third molar before molar distalization in Class II adolescents.
Assuntos
Má Oclusão Classe II de Angle , Dente Serotino , Adolescente , Cefalometria , Feminino , Humanos , Masculino , Maxila/diagnóstico por imagem , Dente Molar/diagnóstico por imagem , Dente Serotino/diagnóstico por imagem , Dente Serotino/cirurgia , Técnicas de Movimentação DentáriaRESUMO
OBJECTIVES: The purpose of this retrospective study was to evaluate the accuracy of intraoral scan (IOS) images in the maxillary and mandibular arches with orthodontic brackets. MATERIAL AND METHODS: From digital impressions of 140 patients who underwent orthodontic treatment, consecutive IOS images were selected based on standardized inclusion criteria: Two pre-orthodontic IOS images (IOS1 and IOS2) of permanent dentition with fully erupted second molars and IOS images obtained immediately after orthodontic bracket bonding (IOSb). Superimpositions were performed to evaluate the reproducibility of repeated IOS images. Accuracy of IOSb images was analyzed by comparing the average surface errors between IOS1c and IOS2c images, which were IOS images cut based on the same region of the interest as between IOS1 and IOSb images. RESULTS: A total of 84 IOS images was analyzed. The average surface errors between IOS1 and IOS2 images were 57 ± 8 µm and 59 ± 14 µm in the maxillary and mandibular arch, respectively, and their reliability was almost perfect. The average errors between IOSb and IOS1c images exhibited an increase, which measured 97 ± 28 µm in the maxillary arch and 95 ± 29 µm in the mandibular arch. These surface deviations between IOSb and IOS1c images were significantly larger in each region as well as entire dentition (P < 0.001) compared to those between IOS1c and IOS2c images. CONCLUSIONS: The average surface errors of the scans with brackets showed increased values compared with those without brackets. This suggests that orthodontic brackets could affect the trueness of intraoral scan images. CLINICAL RELEVANCE: It is necessary for clinicians to consider the effect of brackets on digital impression when using IOS images in orthodontic patients.
Assuntos
Braquetes Ortodônticos , Desenho Assistido por Computador , Arco Dental/diagnóstico por imagem , Técnica de Moldagem Odontológica , Humanos , Imageamento Tridimensional , Modelos Dentários , Reprodutibilidade dos Testes , Estudos RetrospectivosRESUMO
OBJECTIVES: To evaluate the linear, angular, and volumetric changes of soft tissue after clockwise repositioning of the maxillo-mandibular complex in skeletal class III patients using three-dimensional (3D) stereophotogrammetry and to determine the correlation between changes in the skeletal and soft tissue variables. METHODS: This study included 18 skeletal class III patients who underwent two-jaw surgery; superior impaction and clockwise rotational movement of the maxilla with the rotation center at upper incisors, and setback of the mandible. Lateral cephalograms and 3D photographs taken before and 6 months after surgery were compared. RESULTS: After maxillary impaction of anteriorly 1.7âmm and posteriorly 3.1âmm, and mandibular setback of 8.7âmm, the volume of lower lip and chin region decreased significantly by 33.6âcm3 (13% net change, Pâ<â0.001), while paranasal and upper lip region volume increased by 3.2âcm3 (2%) and 7.2âcm3 (4%), respectively. CONCLUSION: The clockwise rotation of maxillo-mandibular complex in class III patients significantly reduced lower lip and chin volume with minimal increase in paranasal and upper lip volumes. 3D stereophotogrammetry can provide quantitative evaluation of facial soft tissue volumetric changes.
Assuntos
Má Oclusão Classe III de Angle , Cefalometria , Humanos , Má Oclusão Classe III de Angle/diagnóstico por imagem , Má Oclusão Classe III de Angle/cirurgia , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Maxila/diagnóstico por imagem , Maxila/cirurgia , Fotogrametria , RotaçãoRESUMO
ABSTRACT: The authors analyzed the three-dimensional postoperative condylar position change across the plating systems. This retrospective study was conducted with the patients who underwent bilateral sagittal split ramus osteotomy with setback surgery. The condylar change was analyzed from preoperative cone-beam computed tomography to postoperative 1âmonth (T1) and postoperative 6âmonths (T2) using superimposition software, automatically merging based on the anterior cranial base. The condylar changes during T1 and T2 were analyzed across the four types of plates (4-hole sliding, heart-shaped, 3-hole sliding, and 4-hole conventional) Mean intraclass correlation coefficient values were consistently high for each measurement (>0.850). During T1, the conventional plate had a decreased condylar anterior distance when compared with the 3-hole sliding plate (Pâ=â0.032). During T2, the conventional plate had an increased condylar posterior distance when compared with the 3-hole sliding plate (Pâ=â0.031). Superimposition software based on the anterior cranial base could be available for measurement of condylar position with highly reproducible results. After bilateral sagittal split ramus osteotomy, the 3-hole sliding plate could effectively compensate for the anterior displacement of the condyle compared to other plates.
Assuntos
Implantes Dentários , Procedimentos Cirúrgicos Ortognáticos , Humanos , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Côndilo Mandibular/diagnóstico por imagem , Côndilo Mandibular/cirurgia , Osteotomia Sagital do Ramo Mandibular , Estudos RetrospectivosRESUMO
INTRODUCTION: The purpose of this study was to analyze the treatment effects after molar distalization using modified C-palatal plates with and without second molar eruption and to evaluate the three-dimensional position of the molars during long-term retention using cone-beam computed tomography. METHODS: The study sample comprised 74 third molars in 42 patients. Twenty-seven adolescent patients (mean age, 12.6 years) having 48 maxillary third molars were divided into 2 groups according to the eruption of their second molars: 15 patients with second molar eruption (group 1) and 12 patients without second molar eruption (group 2). Pretreatment, posttreatment, and long-term data (mean, 5.2 years) from cone-beam computed tomography were scanned and compared with control groups. RESULTS: There was less tipping movement of the first and second molars (0.94° and 3.22°) and distal tipping movement of the third molars (8.91°) in group 1 than in group 2 (4.36°, 7.39°, and 3.08°, respectively), but the treatment time was shorter and the positional change of the third molars was insignificant in group 2. In the long-term, the second molars fully erupted after distalization in group 2, and there was no difference in the third molar position between group 1, group 2, and the control group, except for the vertical position of the third molars in group 1. CONCLUSIONS: In the long-term, the second molars fully erupted after distalization, and the third molars were in a favorable position. Therefore, these findings suggest that clinicians do not need to extract developing third molars before distalization in adolescents.