RESUMO
The use of optogenetic approaches has revealed new roles for intracellular protein condensates described in two papers in this issue of Cell (Bracha et. al., 2018; Shin et al., 2018). These results show that growing condensates are able to exert mechanical forces resulting in chromatin rearrangement, establishing a new role for liquid-liquid phase separation in the mechanobiology of the cell.
Assuntos
Proteínas , Biofísica , CitoplasmaRESUMO
Protein-based biologics are highly suitable for drug development as they exhibit low toxicity and high specificity for their targets. However, for therapeutic applications, biologics must often be formulated to elevated concentrations, making insufficient solubility a critical bottleneck in the drug development pipeline. Here, we report an ultrahigh-throughput microfluidic platform for protein solubility screening. In comparison with previous methods, this microfluidic platform can make, incubate, and measure samples in a few minutes, uses just 20 µg of protein (>10-fold improvement), and yields 10,000 data points (1000-fold improvement). This allows quantitative comparison of formulation excipients, such as sodium chloride, polysorbate, histidine, arginine, and sucrose. Additionally, we can measure how solubility is affected by the combinatorial effect of multiple additives, find a suitable pH for the formulation, and measure the impact of mutations on solubility, thus enabling the screening of large libraries. By reducing material and time costs, this approach makes detailed multidimensional solubility optimization experiments possible, streamlining drug development and increasing our understanding of biotherapeutic solubility and the effects of excipients.
Assuntos
Excipientes , Microfluídica , Solubilidade , Polissorbatos , ProteínasRESUMO
A wide variety of oligomeric structures are formed during the aggregation of proteins associated with neurodegenerative diseases. Such soluble oligomers are believed to be key toxic species in the related disorders; therefore, identification of the structural determinants of toxicity is of upmost importance. Here, we analysed toxic oligomers of α-synuclein and its pathological variants in order to identify structural features that could be related to toxicity and found a novel structural polymorphism within G51D oligomers. These G51D oligomers can adopt a variety of ß-sheet-rich structures with differing degrees of α-helical content, and the helical structural content of these oligomers correlates with the level of induced cellular dysfunction in SH-SY5Y cells. This structure-function relationship observed in α-synuclein oligomers thus presents the α-helical structure as another potential structural determinant that may be linked with cellular toxicity in amyloid-related proteins.
Assuntos
Mutação , Agregação Patológica de Proteínas/genética , Agregação Patológica de Proteínas/metabolismo , Multimerização Proteica , alfa-Sinucleína/química , alfa-Sinucleína/genética , Humanos , Doenças Neurodegenerativas , Agregados Proteicos , Ligação Proteica , Multimerização Proteica/genética , Análise Espectral , alfa-Sinucleína/metabolismoRESUMO
The detection and analysis of proteins in a label-free manner under native solution conditions is an increasingly important objective in analytical bioscience platform development. Common approaches to detect native proteins in solution often require specific labels to enhance sensitivity. Dry mass sensing approaches, by contrast, using mechanical resonators, can operate in a label-free manner and offer attractive sensitivity. However, such approaches typically suffer from a lack of analyte selectivity as the interface between standard protein separation techniques and micro-resonator platforms is often constrained by qualitative mechanical sensor performance in the liquid phase. Here, we describe a strategy that overcomes this limitation by coupling liquid chromatography with a quartz crystal microbalance (QCM) platform by using a microfluidic spray dryer. We explore a strategy which allows first to separate a protein mixture in a physiological buffer solution using size exclusion chromatography, permitting specific protein fractions to be selected, desalted, and subsequently spray-dried onto the QCM for absolute mass analysis. By establishing a continuous flow interface between the chromatography column and the spray device via a flow splitter, simultaneous protein mass detection and sample fractionation is achieved, with sensitivity down to a 100 µg/mL limit of detection. This approach for quantitative label-free protein mixture analysis offers the potential for detection of protein species under physiological conditions.
Assuntos
Técnicas Biossensoriais , Cromatografia Líquida , Técnicas de Microbalança de Cristal de Quartzo , Proteína Estafilocócica ARESUMO
Peptides and proteins have evolved to self-assemble into supramolecular entities through a set of non-covalent interactions. Such structures and materials provide the functional basis of life. Crucially, biomolecular assembly processes can be highly sensitive to and modulated by environmental conditions, including temperature, light, ionic strength and pH, providing the inspiration for the development of new classes of responsive functional materials based on peptide building blocks. Here, it is shown that the stimuli-responsive assembly of amyloidogenic peptide can be used as the basis of environmentally responsive microcapsules which exhibit release characteristics triggered by a change in pH. The microcapsules are biocompatible and biodegradable and may act as vehicles for controlled release of a wide range of biomolecules. Cryo-SEM images reveal the formation of a fibrillar network of the capsule interior with discrete compartments in which cargo molecules can be stored. In addition, the reversible formation of these microcapsules by modulating the solution pH is investigated and their potential application for the controlled release of encapsulated cargo molecules, including antibodies, is shown. These results suggest that the approach described here represents a promising venue for generating pH-responsive functional peptide-based materials for a wide range of potential applications for molecular encapsulation, storage, and release.
Assuntos
Peptídeos , Cápsulas , Concentração de Íons de Hidrogênio , TemperaturaRESUMO
Correction for 'Correction: Multi-scale microporous silica microcapsules from gas-in water-in oil emulsions' by Zenon Toprakcioglu et al., Soft Matter, 2020, 16, 3586-3586, DOI: .
RESUMO
Self-assembling peptides and proteins have the potential to serve as multifunctional building blocks for the generation of versatile materials for a wide range of biomedical applications. In particular, supramolecular hydrogels comprised of self-assembled protein nanofibrils, have been used in contexts ranging from tissue engineering to drug delivery. Due to the rapid emergence of multidrug resistant bacteria, development of biomaterials with intrinsic antimicrobial properties has been continuously increasing. Here, we describe hybrid organic/inorganic nanofibrillar silk microgels decorated with silver nanoparticles that display potent antimicrobial activity in vitro and in vivo and are able to adhere bacterial cells to their surfaces while subsequently eradicating them, through a two-step mechanism of action. Importantly, in contrast to treatments involving conventional silver, these silk-silver microgels are nonhemolytic and noncytotoxic toward mammalian cell lines. Finally, we show that these hybrid microgels display substantial efficacy as topical antimicrobial agents in a murine model of surgical site infections.
Assuntos
Antibacterianos , Anti-Infecciosos , Bactérias/crescimento & desenvolvimento , Aderência Bacteriana/efeitos dos fármacos , Infecções Bacterianas , Hidrogéis , Nanopartículas Metálicas , Nanofibras , Seda , Prata , Animais , Antibacterianos/química , Antibacterianos/farmacologia , Anti-Infecciosos/química , Anti-Infecciosos/farmacologia , Infecções Bacterianas/tratamento farmacológico , Infecções Bacterianas/metabolismo , Infecções Bacterianas/patologia , Farmacorresistência Bacteriana Múltipla/efeitos dos fármacos , Hidrogéis/química , Hidrogéis/farmacologia , Teste de Materiais , Nanopartículas Metálicas/química , Nanopartículas Metálicas/uso terapêutico , Camundongos , Nanofibras/química , Nanofibras/uso terapêutico , Ovinos , Seda/química , Seda/farmacologia , Prata/química , Prata/farmacologiaRESUMO
Protein-based fibers are used by nature as high-performance materials in a wide range of applications, including providing structural support, creating thermal insulation, and generating underwater adhesives. Such fibers are commonly generated through a hierarchical self-assembly process, where the molecular building blocks are geometrically confined and aligned along the fiber axis to provide a high level of structural robustness. Here, this approach is mimicked by using a microfluidic spinning method to enable precise control over multiscale order during the assembly process of nanoscale protein nanofibrils into micro- and macroscale fibers. By varying the flow rates on chip, the degree of nanofibril alignment can be tuned, leading to an orientation index comparable to that of native silk. It is found that the Young's modulus of the resulting fibers increases with an increasing level of nanoscale alignment of the building blocks, suggesting that the mechanical properties of macroscopic fibers can be controlled through varying the level of ordering of the nanoscale building blocks. Capitalizing on strategies evolved by nature, the fabrication method allows for the controlled formation of macroscopic fibers and offers the potential to be applied for the generation of further novel bioinspired materials.
Assuntos
Microfluídica , Nanofibras , Materiais Biomiméticos/química , Módulo de Elasticidade , Nanofibras/química , Proteínas/química , Resistência ao Cisalhamento , Seda/químicaRESUMO
Microemulsions have found a wide range of applications exploiting their chemical and physical properties. Development of microfluidic-based approaches has allowed for the controlled production of highly monodispersed emulsions, including the formation of multiple and hierarchical emulsions. Conventional poly(dimethylsiloxane)-based microfluidic systems require tight spatial control over the surface chemistry when used for double emulsion generation, which can be challenging to achieve on the micrometer scale. Here, we present a two-dimensional device design, which can selectively be surface-treated in a straightforward manner and allows for the formation of uniform water/oil/water double emulsions by combining two distinct hydrophilic and hydrophobic surface properties. These surfaces are sufficiently separated in space to allow for imparting their functionalization without the requirement for lithographic approaches or complex flow control. We demonstrate that a mismatch between the wettability requirements of the continuous phase and the channel wall inherent in this approach can be tolerated over several hundreds of micrometers, opening up the possibility to use simple pressure-driven flows to achieve surface functionalization. The design architecture exhibits robust efficiency in emulsion generation while retaining simple device fabrication. We finally demonstrate the potential of this approach by generating water in oil in water emulsions with lipid molecules acting as surfactants.
RESUMO
Correction for 'Multi-scale microporous silica microcapsules from gas-in water-in oil emulsions' by Zenon Toprakcioglu et al., Soft Matter, 2020, DOI: 10.1039/c9sm02274k.
RESUMO
Controlling the surface area, pore size and pore volume of microcapsules is crucial for modulating their activity in applications including catalytic reactions, delivery strategies or even cell culture assays, yet remains challenging to achieve using conventional bulk techniques. Here we describe a microfluidics-based approach for the formation of monodisperse silica-coated micron-scale porous capsules of controllable sizes. Our method involves the generation of gas-in water-in oil emulsions, and the subsequent rapid precipitation of silica which forms around the encapsulated gas bubbles resulting in hollow silica capsules with tunable pore sizes. We demonstrate that by varying the gas phase pressure, we can control both the diameter of the bubbles formed and the number of internal bubbles enclosed within the silica microcapsule. Moreover, we further demonstrate, using optical and electron microscopy, that these silica capsules remain stable under particle drying. Such a systematic manner of producing silica-coated microbubbles and porous microparticles thus represents an attractive class of biocompatible material for biomedical and pharmaceutical related applications.
Assuntos
Cápsulas/química , Emulsões/química , Óleos/química , Dióxido de Silício/química , Água/química , Materiais Biocompatíveis/química , Composição de Medicamentos/instrumentação , Desenho de Equipamento , Gases/química , Microbolhas , PorosidadeRESUMO
In nature, intracellular microcompartments have evolved to allow the simultaneous execution of tightly regulated complex processes within a controlled environment. This architecture serves as the blueprint for the construction of a wide array of artificial cells. However, such systems are inadequate in their ability to confine and sequentially control multiple central dogma activities (transcription, translation, and post-translational modifications) resulting in a limited production of complex biomolecules. Here, an artificial cell-on-a-chip comprising hierarchical compartments allowing the processing and transport of products from transcription, translation, and post-translational modifications through connecting channels is designed and fabricated. This platform generates a tightly controlled system, yielding directly a purified modified protein, with the potential to produce proteoform of choice. Using this platform, the full ubiquitinated form of the Parkinson's disease-associated α-synuclein is generated starting from DNA, in a single device. By bringing together all central dogma activities in a single controllable platform, this approach will open up new possibilities for the synthesis of complex targets, will allow to decipher diverse molecular mechanisms in health and disease and to engineer protein-based materials and pharmaceutical agents.
Assuntos
Células Artificiais , Dispositivos Lab-On-A-Chip , Processamento de Proteína Pós-Traducional , Proteínas Ubiquitinadas/metabolismo , Biossíntese de Proteínas , Proteínas Recombinantes de Fusão/metabolismo , Transcrição Gênica , alfa-Sinucleína/metabolismoRESUMO
Silk fibroin is a natural protein obtained from the Bombyx mori silkworm. In addition to being the key structural component in silkworm cocoons, it also has the propensity to self-assemble in vitro into hierarchical structures with desirable properties such as high levels of mechanical strength and robustness. Furthermore, it is an appealing biopolymer due to its biocompatability, low immunogenicity, and lack of toxicity, making it a prime candidate for biomedical material applications. Here, it is demonstrated that nanofibrils formed by reconstituted silk fibroin can be engineered into supramolecular microgels using a soft lithography-based microfluidic approach. Building on these results, a potential application for these protein microgels to encapsulate and release small molecules in a controlled manner is illustrated. Taken together, these results suggest that the tailored self-assembly of biocompatible and biodegradable silk nanofibrils can be used to generate functional micromaterials for a range of potential applications in the biomedical and pharmaceutical fields.
Assuntos
Fibroínas/química , Seda/química , Animais , Materiais Biocompatíveis/química , Bombyx , Géis/química , Substâncias Macromoleculares/químicaRESUMO
The transition of peptides and proteins from the solution phase into fibrillar structures is a general phenomenon encountered in functional and aberrant biology and is increasingly exploited in soft materials science. However, the fundamental molecular events underpinning the early stages of their assembly and subsequent growth have remained challenging to elucidate. Here, we show that liquid-liquid phase separation into solute-rich and solute-poor phases is a fundamental step leading to the nucleation of supramolecular nanofibrils from molecular building blocks, including peptides and even amphiphilic amino acids. The solute-rich liquid droplets act as nucleation sites, allowing the formation of thermodynamically favorable nanofibrils following Ostwald's step rule. The transition from solution to liquid droplets is entropy driven while the transition from liquid droplets to nanofibrils is mediated by enthalpic interactions and characterized by structural reorganization. These findings shed light on how the nucleation barrier toward the formation of solid phases can be lowered through a kinetic mechanism which proceeds through a metastable liquid phase.
Assuntos
Aminoácidos/química , Peptídeos/química , Polímeros/síntese química , Varredura Diferencial de Calorimetria , Microscopia Crioeletrônica , Bases de Dados de Compostos Químicos , Nanocompostos/química , Transição de Fase , Prata/química , Soluções/química , Espectroscopia de Infravermelho com Transformada de Fourier , Termodinâmica , Difração de Raios XRESUMO
Elucidation of the fundamental interactions of proteins with biological membranes under native conditions is crucial for understanding the molecular basis of their biological function and malfunction. Notably, the large surface to volume ratio of living cells provides a molecular landscape for significant interactions of cellular components with membranes, thereby potentially modulating their function. However, such interactions can be challenging to probe using conventional biophysical methods due to the heterogeneity of the species and processes involved. Here, we use direct measurements of micron scale molecular diffusivity to detect and quantify the interactions of α-synuclein, associated with the etiology of Parkinson's disease, with negatively charged lipid vesicles. We further demonstrate that this microfluidic approach enables the characterization of size distributions of different binary mixtures of vesicles, which are not readily accessible using conventional light scattering techniques. Finally, the size distributions of the two α-synuclein conformations, free α-synuclein and membrane-bound α-synuclein, were resolved under varying lipid:protein ratios, thus, allowing the determination of the dissociation constant and the binding stoichiometry associated with this protein-lipid system. The microfluidic diffusional sizing platform allows these measurements to be performed on a time scale of minutes using microlitre volumes, thus, establishing the basis for an approach for the study of molecular interactions of heterogeneous systems under native conditions.
Assuntos
Lipossomas Unilamelares/metabolismo , alfa-Sinucleína/metabolismo , Difusão , Técnicas Analíticas Microfluídicas/métodos , Tamanho da Partícula , Fosfatidiletanolaminas/metabolismo , Fosfatidilserinas/metabolismo , Ligação Proteica , Lipossomas Unilamelares/química , alfa-Sinucleína/químicaRESUMO
Hepatitis C virus (HCV) is a positive-strand RNA virus of the Flaviviridae family and a major cause of liver disease worldwide. HCV replicates in the cytoplasm, and the synthesis of viral proteins induces extensive rearrangements of host cell membranes producing structures, collectively termed the membranous web (MW). The MW contains the sites of viral replication and assembly, and we have identified distinct membrane fractions derived from HCV-infected cells that contain replication and assembly complexes enriched for viral RNA and infectious virus, respectively. The complex membrane structure of the MW is thought to protect the viral genome limiting its interactions with cytoplasmic pattern recognition receptors (PRRs) and thereby preventing activation of cellular innate immune responses. Here we show that PRRs, including RIG-I and MDA5, and ribosomes are excluded from viral replication and assembly centers within the MW. Furthermore, we present evidence that components of the nuclear transport machinery regulate access of proteins to MW compartments. We show that the restricted assess of RIG-I to the MW can be overcome by the addition of a nuclear localization signal sequence, and that expression of a NLS-RIG-I construct leads to increased immune activation and the inhibition of viral replication.
Assuntos
Hepacivirus/fisiologia , Replicação Viral/genética , Transporte Ativo do Núcleo Celular , Linhagem Celular , Membrana Celular/virologia , Humanos , Sinais de Localização Nuclear/metabolismo , RNA Viral/isolamento & purificação , Receptores de Reconhecimento de Padrão/imunologia , Proteínas Virais/genéticaRESUMO
Many industrial soft materials include oil-in-water (O/W) emulsions at the core of their formulations. By using tuneable interface stabilizing agents, such emulsions can self-assemble into complex structures. DNA has been used for decades as a thermoresponsive, highly specific binding agent between hard and, recently, soft colloids. Up until now, emulsion droplets functionalized with DNA had relatively low coating densities and were expensive to scale up. Here, a general O/W DNA-coating method using functional nonionic amphiphilic block copolymers, both diblock and triblock, is presented. The hydrophilic poly(ethylene glycol) ends of the surfactants are functionalized with azides, allowing for efficient, dense, and controlled coupling of dibenzocyclooctane-functionalized DNA to the polymers through a strain-promoted alkyne-azide click reaction. The protocol is readily scalable due to the triblock's commercial availability. Different production methods (ultrasonication, microfluidics, and membrane emulsification) are used with different oils (hexadecane and silicone oil) to produce functional droplets in various size ranges (submicron, â¼20 and >50 µm), showcasing the generality of the protocol. Thermoreversible submicron emulsion gels, hierarchical "raspberry" droplets, and controlled droplet release from a flat DNA-coated surface are demonstrated. The emulsion stability and polydispersity is evaluated using dynamic light scattering and optical microscopy. The generality and simplicity of the method opens up new applications in soft matter, biotechnological research, and industrial advances.
Assuntos
Alcanos/química , DNA/química , Emulsões/química , Óleos de Silicone/química , Tensoativos/química , Azidas/química , Sequência de Bases , Tamanho da Partícula , Polietilenoglicóis/química , Poliestirenos/química , Propilenoglicóis/químicaRESUMO
The self-assembly of peptides into ordered supramolecular structures, such as fibrils and crystals, is of relevance in such diverse areas as molecular medicine and materials science. However, little information is available about the fundamental thermodynamic driving forces of these types of self-assembly processes. Here, we investigate in detail the thermodynamics of assembly of diphenylalanine (FF). This dipeptide forms the central motif of the Aß peptides, which are associated with Alzheimer's disease through their presence in amyloid plaques in the nervous systems of affected individuals. We identify the molecular origins of the self-assembly of FF in aqueous solution, and we evaluate these findings in the context of the aggregation free energies of longer peptides that are able to form amyloid fibrils. We find that the thermodynamics of FF assembly displays the typical characteristics of hydrophobic desolvation processes, and detailed analysis of the temperature dependence of the kinetics of assembly within the framework of crystallization theories reveals that the transition state from solution to crystalline aggregates is enthalpically unfavorable and entropically favorable, qualitatively similar to what has been found for longer sequences. This quantitative comparison of aggregating peptides of very different lengths is the basis of an in-depth understanding of the relationship between sequence and assembly behavior.
Assuntos
Fenilalanina/análogos & derivados , Termodinâmica , Doença de Alzheimer , Amiloide/síntese química , Amiloide/química , Peptídeos beta-Amiloides/síntese química , Peptídeos beta-Amiloides/química , Dipeptídeos , Humanos , Interações Hidrofóbicas e Hidrofílicas , Cinética , Fenilalanina/síntese química , Fenilalanina/químicaRESUMO
Microfluidic devices can be used to produce single, double and higher order emulsions, where droplet sizes can be precisely controlled and modulated. Such emulsions have great potential for the storage and study of biomolecules, including peptides and proteins. However, advancement of this technique has remained challenging due to the tendency of various biomolecules to adhere to the surface of the formed channels, resulting in changes in surface wetting and fouling on the micrometer scale. Thus, precise control of surface wettability plays a crucial role in the processes that govern droplet formation. Here, we report an approach for producing both water-oil-water (w/o/w) and oil-water-oil (o/w/o) double emulsions without any need for surface modification, an enabling feature for biomolecular encapsulation. Using this strategy, we show that the number of monodisperse encapsulated internal droplets can be controlled systematically and reproducibly by suitable adjustment of the relevant flow rates, and ranges from 1 to 40 in the case of w/o/w emulsions. We further demonstrate that the number of internal droplets scales linearly with the reciprocal flow rate of the outer continuous phase, when the inner and middle phase flow rates are kept constant. We demonstrate that this approach is suitable for forming double emulsions where the inner phase consists of reconstituted silk protein solution whereby incubation of the internal droplets can be induced to form a gel resulting in silk fibroin microgels surrounded by an external oil shell. Finally, for o/w/o emulsions, we show that single or multiple monodisperse internal droplets can be encapsulated with a size that ranges over 1 order of magnitude, from ca. 10 µm to >100 µm. Moreover, o/w/o emulsions where the middle phase consists of silk fibroin solution were prepared and by allowing the protein to aggregate, a core-shell structure was formed. This microfluidic strategy allows for multiple emulsions to be generated drop by drop for biomolecular solutions with potential applications in the biomedical and pharmaceutical fields.
Assuntos
Emulsões/química , Dispositivos Lab-On-A-Chip , Óleos/química , Proteínas/química , Agregados Proteicos , Soluções/química , Água/químicaRESUMO
Amino acids and short peptides modified with the 9-fluorenylmethyloxycarbonyl (Fmoc) group possess eminent self-assembly features and show distinct potential for applications due to the inherent hydrophobicity and aromaticity of the Fmoc moiety which can promote the association of building blocks. Given the extensive study and numerous publications in this field, it is necessary to summarize the recent progress concerning these important bio-inspired building blocks. Therefore, in this review, we explore the self-organization of this class of functional molecules from three aspects, i.e., Fmoc-modified individual amino acids, Fmoc-modified di- and tripeptides, and Fmoc-modified tetra- and pentapeptides. The relevant properties and applications related to cell cultivation, bio-templating, optical, drug delivery, catalytic, therapeutic and antibiotic properties are subsequently summarized. Finally, some existing questions impeding the development of Fmoc-modified simple biomolecules are discussed, and corresponding strategies and outlooks are suggested.