Transient charge-driven 3D conformal printing via pulsed-plasma impingement.

Seamless integration of microstructures and circuits on three-dimensional (3D) complex surfaces is of significance and is catalyzing the emergence of many innovative 3D curvy electronic devices. However, patterning fine features on arbitrary 3D targets remains challenging. Here, we propose a facile charge-driven electrohydrodynamic 3D microprinting technique that allows micron- and even submicron-scale patterning of functional inks on a couple of 3D-shaped dielectrics via an atmospheric-pressure cold plasma jet. Relying on the transient charging of exposed sites arising from the weakly ionized gas jet, the specified charge is programmably deposited onto the surface as a virtual electrode with spatial and time spans of ~mm in diameter and ~µs in duration to generate a localized electric field accordantly. Therefore, inks with a wide range of viscosities can be directly drawn out from micro-orifices and deposited on both two-dimensional (2D) planar and 3D curved surfaces with a curvature radius down to ~1 mm and even on the inner wall of narrow cavities via localized electrostatic attraction, exhibiting a printing resolution of ~450 nm. In addition, several conformal electronic devices were successfully printed on 3D dielectric objects. Self-aligned 3D microprinting, with stacking layers up to 1400, is also achieved due to the electrified surfaces. This microplasma-induced printing technique exhibits great advantages such as ultrahigh resolution, excellent compatibility of inks and substrates, antigravity droplet dispersion, and omnidirectional printing on 3D freeform surfaces. It could provide a promising solution for intimately fabricating electronic devices on arbitrary 3D surfaces.

Self-Driven, Monopolar Electrohydrodynamic Printing via Dielectric Nanoparticle Layer.

Electrohydrodynamic printing holds both ultrahigh-resolution fabrication capability and unmatched ink-viscosity compatibility yet fails on highly insulating thick/irregular substrates. Herein, we proposed a single-potential driven electrohydrodynamic printing process with submicrometer resolution on arbitrary nonconductive targets, regardless of their geometric shape or sizes, via precoating with an ultrathin dielectric nanoparticle layer. Benefiting from the favorable Maxwell-Wagner polarization, the reversely polarized spot brought about a significant drop (∼57% for ceramics) in the operation voltage as its induced electric field and a negligible residual charge accumulation. Thus, ordered micro/nanostructures with line widths down to 300 nm were directly written at a stage speed as low as 5 mm/s, and silver features with width of ∼2 µm or interval of ∼4 µm were achieved on insulating substrates separately. Flexible sensors and curved heaters were then high-precision printed and demonstrated successfully, presenting this technique with huge potential for fabricating flexible/conformal electronics on arbitrary 3D structures.