RESUMO
Single-atom catalysts (SACs) with unitary active sites hold great promise for realizing high selectivity toward a single product in the CO2 electroreduction reaction (CO2RR). However, achieving high Faradaic efficiency (FE) of multielectron products like methane on SACs is still challenging. Herein, we report a pressure-regulating strategy that achieves 83.5 ± 4% FE for the CO2-to-CH4 conversion on the asymmetric Cu-N2 sites, representing one of the best CO2-to-CH4 performances. Elevated CO2 pressure was demonstrated as an efficient way to inhibit the hydrogen evolution reaction via promoting the competing adsorption of reactant CO2, regardless of the nature of the active sites. Meanwhile, the asymmetric Cu-N2 structure could endow the Cu sites with stronger electronic coupling with *CO, thus suppressing the desorption of *CO and facilitating the following hydrogenation of *CO to *CHO. This work provides a synergetic strategy of the pressure-induced reaction environment regulating and the electronic structure modulating for selective CO2RR toward targeted products.
RESUMO
Introducing a second metal species into atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts to construct diatomic sites (DASs) is an effective strategy to elevate their activities and stabilities. However, the common pyrolysis-based method usually leads to substantial uncertainty for the formation of DASs, and the precise identification of the resulting DASs is also rather difficult. In this regard, we developed a two-step specific-adsorption strategy (pyrolysis-free) and constructed a DAS catalyst featuring FeCo "molecular heterostructures" (FeCo-MHs). In order to rule out the possibility of the two apparently neighboring (in the electron microscopy image) Fe/Co atoms being dispersed respectively on the top/bottom surfaces of the carbon support and thus forming "false" MHs, we conducted in situ rotation (by 8°, far above the critical angle of 5.3°) and directly identified the individual FeCo-MHs. The formation of FeCo-MHs could modulate the magnetic moments of the metal centers and increase the ratio of low-spin Fe(II)-N4 moiety; thus the intrinsic activity could be optimized at the apex of the volcano-plot (a relationship as a function of magnetic moments of metal-phthalocyanine complexes and catalytic activities). The FeCo-MHs catalyst displays an exceptional ORR activity (E1/2 = 0.95 V) and could be used to construct high-performance cathodes for hydroxide exchange membrane fuel cells and zinc-air batteries.
RESUMO
Metal single-atom catalysts are promising in electrochemical CO2 reduction reaction (CO2 RR). The pores and cavities of the supports can promote the exposure of active sites and mass transfer of reactants, hence improve their performance. Here, iron oxalate is added to ZIF-8 and subsequently form hollow carbon nanocages during calcination. The formation mechanism of the hollow structure is studied in depth by controlling variables during synthesis. Kirkendall effect is the main reason for the formation of hollow porous carbon nanocages. The hollow porous carbon nanocages with Fe single atoms exhibit better CO2 RR activity and CO selectivity. The diffusion of CO2 facilitated by the mesoporous structure of carbon nanocage results in their superior activity and selectivity. This work has raised an effective strategy for the synthesis of hollow carbon nanomaterials, and provides a feasible pathway for the rational design of electrocatalysts for small molecule activation.
RESUMO
An Fe-N-C catalyst with an FeN4 active moiety has gained ever-increasing attention for the oxygen reduction reaction (ORR); however, the catalytic performance is sluggish in acidic solutions and the regulation is still a challenge. Herein, Fe-Mo dual-metal sites were constructed to tune the ORR activity of a mononuclear Fe site embedded in porous nitrogen-doped carbon. The cracking of O-O bonds is much more facile on the Fe-Mo atomic pair site due to the preferred bridge-cis adsorption model of oxygen molecules. The downshift of the Fe d band center when an Mo atom is introduced to the FeNx configuration optimizes the absorption-desorption behavior of ORR intermediates in the FeMoN6 active moiety, thus boosting the catalytic performance. The construction of dual-metal atom sites to regulate the catalytically active moiety paves the way for boosting the electrocatalytic performance of other similar non-precious-metal catalysts.
RESUMO
FeN4 moieties embedded in partially graphitized carbon are the most efficient platinum group metal free active sites for the oxygen reduction reaction in acidic proton-exchange membrane fuel cells. However, their formation mechanisms have remained elusive for decades because the Fe-N bond formation process always convolutes with uncontrolled carbonization and nitrogen doping during high-temperature treatment. Here, we elucidate the FeN4 site formation mechanisms through hosting Fe ions into a nitrogen-doped carbon followed by a controlled thermal activation. Among the studied hosts, the ZIF-8-derived nitrogen-doped carbon is an ideal model with well-defined nitrogen doping and porosity. This approach is able to deconvolute Fe-N bond formation from complex carbonization and nitrogen doping, which correlates Fe-N bond properties with the activity and stability of FeN4 sites as a function of the thermal activation temperature.
RESUMO
Excessive CO2 emission due to a large amount of fossil fuel utilization has become a widespread concern, which causes both environmental and energy problems. To solve these issues, electrocatalytic and photocatalytic reduction of CO2 to produce value-added chemicals have gained immense attention. Recently, metal-organic frameworks (MOFs) and their derived materials with high specific surface areas, controllable pore structures, and tunable chemical properties exhibit promising performance among the reported catalytic materials for CO2 conversion. This review describes the recent advances on the rational design and synthesis of MOF-based electrocatalysts and photocatalysts for CO2 reduction. The importance of the catalytic processes is highlighted, followed by systematic understanding of MOF-based catalysts for CO2 reduction through electrochemical and photochemical approaches. Special emphasis of this review is to introduce basic catalyst design strategies and synthesis methods as well as their resulting electrocatalysts and photocatalysts. One of the major goals is to elucidate the structures and properties that link to their catalytic activity, selectivity, and stability towards to CO2 reduction. We also outline the challenges in this research area and propose the potential strategies for the rational design and synthesis of high-performance catalysts.
RESUMO
Aqueous Zn-iodine (Zn-I2) conversion batteries with iodine redox chemistry suffers the severe polyiodide shuttling and sluggish redox kinetics, which impede the battery lifespan and rate capability. Herein, an ultrastable Zn-I2 battery is introduced based on single-atom Fe-N-C encapsulated high-surface-area carbon (HC@FeNC) as the core-shell cathode materials, which accelerate the I-/I3 -/I° conversion significantly. The robust chemical-physical interaction between polyiodides and Fe-N4 sites tightly binds the polyiodide ions and suppresses the polyiodide shuttling, thereby significantly enhancing the coulombic efficiency. As a result, the core-shell HC@FeNC cathode endows the electrolytic Zn-I2 battery with an excellent capacity, remarkable rate capability, and an ultralong lifespan over 60 000 cycles. More importantly, a practical 253 Wh kg-1 pouch cell shows good capacity retention of 84% after 100 cycles, underscoring its considerable potential for commercial Zn-I2 batteries.
RESUMO
Single-atom catalysts (SACs) are emerging as the most promising catalysts for various electrochemical reactions. The isolated dispersion of metal atoms enables high density of active sites, and the simplified structure makes them ideal model systems to study the structure-performance relationships. However, the activity of SACs is still insufficient, and the stability of SACs is usually inferior but has received little attention, hindering their practical applications in real devices. Moreover, the catalytic mechanism on a single metal site is unclear, leading the development of SACs to rely on trial-and-error experiments. How can one break the current bottleneck of active sites density? How can one further increase the activity/stability of metal sites? In this Perspective, we discuss the underlying reasons for the current challenges and identify precisely controlled synthesis involving designed precursors and innovative heat-treatment techniques as the key for the development of high-performance SACs. In addition, advanced operando characterizations and theoretical simulations are essential for uncovering the true structure and electrocatalytic mechanism of an active site. Finally, future directions that may arise breakthroughs are discussed.
RESUMO
Hydrogen evolution reaction (HER) in neutral media is of great practical importance for sustainable hydrogen production, but generally suffers from low activities, the cause of which has been a puzzle yet to be solved. Herein, by investigating the synergy between Ru single atoms (RuNC) and RuSex cluster compounds (RuSex) for HER using ab initio molecular dynamics, operando X-ray absorption spectroscopy, and operando surface-enhanced infrared absorption spectroscopy, we establish that the interfacial water governs neutral HER. The rigid interfacial water layer in neutral media would inhibit the transport of H2O*/OH* at the electrode/electrolyte interface of RuNC, but the RuSex can promote H2O*/OH* transport to increase the number of available H2O* on RuNC by disordering the interfacial water network. With the synergy of RuSex and RuNC, the resulting neutral HER performance in terms of mass-specific activity is 6.7 times higher than that of 20 wt.% Pt/C at overpotential of 100 mV.
RESUMO
The sluggish oxygen reduction reaction (ORR) has becoming the bottleneck of largescale implementation of proton exchange membrane fuel cells. However, when it comes to the ORR activity assessing of platinum group metals (PGMs) with rotating disk electrode, the corresponding potential conversion vs. reversible hydrogen electrode, test protocols, and activity calculation processes are still in chaos in many published literatures. In this work, two standard calculation processes for PGM ORR activities are demonstrated, followed by a specification for the usage of reference electrodes. Then a 4-fold discrepancy in ORR activities obtained via different test protocols is found for the same Pt/C, and an average adsorption model and the "coverage effects" are proposed to illustrate the hysteresis loop between negative and positive-going ORR polarization plots. Finally, four motions over appropriate assessment of PGM ORR activity are emphasized, hoping to bring a fair communication platform for researchers from different groups.
RESUMO
Pt alloy nanoparticles supported on Vulcan XC-72 (Pt/C) are the most effective catalysts for kinetically sluggish oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. However, significant performance degradation has been observed with the Pt/C catalysts due to agglomeration and Ostwald ripening of Pt nanoparticles largely resulting from the corrosion of carbon supports. Here, we developed a Pt alloy catalyst through annealing Pt nanoparticles deposited on nitrogen/metal co-doped large-size graphene tubes (NGTs). The in-situ formation of PtM (M: Co and Ni) alloy during the annealing process contributes to the improvement of the catalytic activity and stability. During the accelerated stress tests (AST), after 20 000 potential cycles (0.6-1.0 V vs. RHE), the retained electrochemical surface area (ECSA) of the PtM/NGT catalyst is more than 2 times larger than that of the Pt/C catalyst. As for the AST tests of carbon corrosion, after 30 000 potential cycles (1.0-1.5 V vs. RHE) at room temperature, the NGT morphologies are well maintained and no ECSA loss of this PtM catalyst is observed, indicating excellent corrosion-resistance. Even at harsher 60 °C, the PtM/NGT catalyst exhibits only insignificant loss (6 mV) of E1/2 while the Pt/C catalyst shows significant degradation (47 mV loss in E1/2). The improved stability of PtM/NGT catalyst is attributed to the highly graphitized NGTs and possible synergistic effects between the NGT carbon support and the PtM alloy nanoparticles.
RESUMO
The oxygen reduction reaction (ORR) in a cathode is an essential component of many electrochemical energy storage and conversion systems. Two-dimensional materials are beneficial for electron conduction and mass transport with high density, showing prominent electrochemical catalytic performance towards the ORR. Herein, a simple NaCl-assisted method to synthesize cobalt-nitrogen-doped carbon materials (CoNC), which present prominent performance towards the ORR in alkaline media, is described. The utilization of the NaCl template endows the product with a large specific surface area of 556.4â m2 g-1 , as well as good dispersion of cobalt nanoparticles. CoNC-800@NaCl (800 indicates the calcination temperature in °C) displays an excellent onset potential of 0.94â V (vs. a reversible hydrogen electrode), which is close to that of commercial Pt/C. Additionally, CoNC-800@NaCl also exhibits better long-term durability and methanol tolerance than that of Pt/C. The high-performance CoNC-800@NaCl catalyst provides a hopeful alternative to noble-metal catalysts for the ORR in practical applications.