Trinitarian Design of Gradient Artificial Interphase Enables Colossal Granular Li Deposits for Stable Li-Metal Batteries.

The cycling lifespan of Li-metal batteries is compromised by the unstable solid electrolyte interphase (SEI) and the continuous Li dendrites, restricting their practical implementations. Given these challenges, establishing an artificial SEI holds promise. Herein, a trinitarian gradient interphase is innovatively designed through composite coatings of magnesium fluoride (MgF2), N-hexadecyltrimethylammonium chloride (CTAC), and polyvinylidene fluoride-hexafluoropropylene copolymer (PVDF-HFP) on Li-metal anode (LMA). Specifically, the MgF2/CTAC/PVDF-HFP SEI spontaneously forms a lithium fluoride (LiF)-rich PVDF-HFP-based SEI, along with lithium-magnesium (Li-Mg) alloy substrate as lithiophilic electronic conductor and positively charged CTAC during plating. Noticeably, the Li-Mg alloy homogenizes the distribution of electric field and reduce the internal resistance, while the electronically insulated LiF/PVDF-HFP composite SEI offers fast ion-conducting and mechanical flexibility, accommodating the volumetric expansion and ensuring stable Li-ion flux. Additionally, CTAC at the dendritic tip is pivotal for mitigating dendrites through its electrostatic shield mechanism. Innovatively, this trinitarian synergistic mechanism, which facilitates colossal granular Li deposits, constructs a dendrite-free LMA, leading to stable cycling performances in practical Li||LFP, popular Li||NCM811, and promising Li||S full cells. This work demonstrates the design of multifunctional composite SEI for comprehensive Li protection, thereby inspiring further advancements in artificial SEI engineering for alkali-metal batteries.

Damage-Tolerant and Self-Repairing Web-Like Borate Type Binder Enable Stable Operation of Efficient Si-Based Anodes.

Novel binder designs are shown to be fruitful in improving the electrochemical performance of silicon (Si)-based anodes. However, issues with mechanical damage from dramatic volume change and poor lithium-ion (Li+) diffusion kinetics in Si-based materials still need to be addressed. Herein, an aqueous self-repairing borate-type binder (SBG) with a web-like architecture and high ionic conductivity is designed for Si and SiO electrodes. The 3D web-like architecture of the SBG binder enables uniform stress distribution, while its self-repairing ability promotes effective stress dissipation and mechanical damage repair, thereby enhancing the damage tolerance of the electrode. The tetracoordinate boron ions ( - BO 4 - $ - {\mathrm{BO}}_4^ - $ ) in the SBG binder boosts the Li transportation kinetics of Si-based electrodes. Based on dynamic covalent and ionic conductive boronic ester bonds, the diverse requirements of the binder, including uniform stress distribution, self-repairing ability, and high ionic conductivity, can be met by simple components. Consequently, the proposed straightforward multifunction design strategy for binders based on dynamic boron chemistry provides valuable insights into fabricating high-performance Si-based anodes.

Recent Progress of Self-Supported Metal Oxide Nano-Porous Arrays in Energy Storage Applications.

The demand for high-performance and cost-effective energy storage solutions for mobile electronic devices and electric vehicles has been a driving force for technological advancements. Among the various options available, transitional metal oxides (TMOs) have emerged as a promising candidates due to their exceptional energy storage capabilities and affordability. In particular, TMO nanoporous arrays fabricated by electrochemical anodization technique demonstrate unrivaled advantages including large specific surface area, short ion transport paths, hollow structures that reduce bulk expansion of materials, and so on, which have garnered significant research attention in recent decades. However, there is a lack of comprehensive reviews that discuss the progress of anodized TMO nanoporous arrays and their applications in energy storage. Therefore, this review aims to provide a systematic detailed overview of recent advancements in understanding the ion storage mechanisms and behavior of self-organized anodic TMO nanoporous arrays in various energy storage devices, including alkali metal ion batteries, Mg/Al-ion batteries, Li/Na metal batteries, and supercapacitors. This review also explores modification strategies, redox mechanisms, and outlines future prospects for TMO nanoporous arrays in energy storage.

Partially Carbonized Polymer Binder with Polymer Dots for Silicon Anodes in Lithium-Ion Batteries.

Large-scale applications of conventional conductive binders for silicon (Si) anodes are challenging to accomplish due to their complex synthesis steps and high cost. Herein, a carbonized polymer dots-assisted polyvinyl alcohol-chitosan (PVA-CS-CPDs) binder is developed through a simple and low-cost hydrothermal method. Through rational design, the PVA-CS-CPDs binder retains rich polar groups while forming conjugated structures. The conjugated structure endows the PVA-CS-CPDs with high electronic conductivity, and the retained polar groups maintain strong binding strength. The proposed water-soluble binding system acts as both a binder and conductive additive, enabling stable cycling for high-Si-content (90 wt.%) anodes without any other conductive additives.

Sulfur-/Nitrogen-Rich Albumen Derived "Self-Doping" Graphene for Sodium-Ion Storage.

The development of sodium-ion batteries (SIBs) is hindered by the rapid reduction in reversible capacity of carbon-based anode materials. Outside-in doping of carbon-based anodes has been extensively explored. Nickel and NiS2 particles embedded in nitrogen and sulfur codoped porous graphene can significantly improve the electrochemical performance. Herein a built-in heteroatom "self-doping" of albumen-derived graphene for sodium storage is reported. The built-in sulfur and nitrogen in albumen act as the doping source during the carbonization of proteins. The sulfur-rich proteins in albumen can also guide the doping and nucleation of nickel sulfide nanoparticles. Additionally, the porous architecture of the carbonized proteins is achieved through removable KCl/NaCl salts (medium) under high-temperature melting conditions. During the carbonization process, nitrogen can also reduce the carbonization temperature of thermally stable carbon materials. In this work, the NS-graphene delivered a specific capacity of 108.3 mAh g-1 after 800 cycles under a constant current density of 500 mA g-1 . In contrast, the Ni/NiS2 /NS-graphene maintained a specific capacity of 134.4 mAh g-1 ; thus the presence of Ni/NiS2 particles improved the electrochemical performance of the whole composite.

Li2OHCl Crystalline Electrolyte for Stable Metallic Lithium Anodes.

In a classic example of stability from instability, we show that Li2OHCl solid electrolyte forms a stable solid electrolyte interphase (SEI) layer with a metallic lithium anode. The Li2OHCl solid electrolyte can be readily achieved through simple mixing of LiOH and LiCl precursors at a mild processing temperature <400 °C. Additionally, we show that continuous, dense Li2OHCl membranes can be fabricated at temperatures <400 °C, standing in great contrast to current processing temperatures of >1600 °C for most oxide-based solid electrolytes. The ionic conductivity and Arrhenius activation energy were explored for the LiOH-LiCl system of crystalline solid electrolytes, where Li2OHCl with increased crystal defects was found to have the highest ionic conductivity and reasonable Arrhenius activation energy. The Li2OHCl solid electrolyte displays stability against metallic lithium, even in extreme conditions past the melting point of lithium metal. To understand this excellent stability, we show that SEI formation is critical in stabilizing the interface between metallic lithium and the Li2OHCl solid electrolyte.

Sodium Ion Transport Mechanisms in Antiperovskite Electrolytes Na3OBr and Na4OI2: An in Situ Neutron Diffraction Study.

Na-rich antiperovskites are recently developed solid electrolytes with enhanced sodium ionic conductivity and show promising functionality as a novel solid electrolyte in an all solid-state battery. In this work, the sodium ionic transport pathways of the parent compound Na3OBr, as well as the modified layered antiperovskite Na4OI2, were studied and compared through temperature-dependent neutron diffraction combined with the maximum entropy method. In the cubic Na3OBr antiperovskite, the nuclear density distribution maps at 500 K indicate that sodium ions hop within and among oxygen octahedra, and Br(-) ions are not involved. In the tetragonal Na4OI2 antiperovskite, Na ions, which connect octahedra in the ab plane, have the lowest activation energy barrier. The transport of sodium ions along the c axis is assisted by I(-) ions.

Hierarchical NiCo2 O4 Hollow Microcuboids as Bifunctional Electrocatalysts for Overall Water-Splitting.

Bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte may improve the efficiency of overall water splitting. Nickel cobaltite (NiCo2 O4 ) has been considered a promising electrode material for the OER. However, NiCo2 O4 that can be used as an electrocatalyst in HER has not been studied yet. Herein, we report self-assembled hierarchical NiCo2 O4 hollow microcuboids for overall water splitting including both the HER and OER reactions. The NiCo2 O4 electrode shows excellent activity toward overall water splitting, with 10 mA cm(-2) water-splitting current reached by applying just 1.65 V and 20 mA cm(-2) by applying just 1.74 V across the two electrodes. The synthesis of NiCo2 O4 microflowers confirms the importance of structural features for high-performance overall water splitting.

An Air-Stable Na3 SbS4 Superionic Conductor Prepared by a Rapid and Economic Synthetic Procedure.

All-solid-state sodium batteries, using solid electrolyte and abundant sodium resources, show great promise for safe, low-cost, and large-scale energy storage applications. The exploration of novel solid electrolytes is critical for the room temperature operation of all-solid-state Na batteries. An ideal solid electrolyte must have high ionic conductivity, hold outstanding chemical and electrochemical stability, and employ low-cost synthetic methods. Achieving the combination of these properties is a grand challenge for the synthesis of sulfide-based solid electrolytes. Design of the solid electrolyte Na3 SbS4 is described, realizing excellent air stability and an economic synthesis based on hard and soft acid and base (HSAB) theory. This new solid electrolyte also exhibits a remarkably high ionic conductivity of 1 mS cm(-1) at 25 °C and ideal compatibility with a metallic sodium anode.

Unravelling the Impact of Reaction Paths on Mechanical Degradation of Intercalation Cathodes for Lithium-Ion Batteries.

The intercalation compounds are generally considered as ideal electrode materials for lithium-ion batteries thanks to their minimum volume expansion and fast lithium ion diffusion. However, cracking still occurs in those compounds and has been identified as one of the critical issues responsible for their capacity decay and short cycle life, although the diffusion-induced stress and volume expansion are much smaller than those in alloying-type electrodes. Here, we designed a thin-film model system that enables us to tailor the cation ordering in LiNi(0.5)Mn(1.5)O4 spinels and correlate the stress patterns, phase evolution, and cycle performances. Surprisingly, we found that distinct reaction paths cause negligible difference in the overall stress patterns but significantly different cracking behaviors and cycling performances: 95% capacity retention for disordered LiNi(0.5)Mn(1.5)O4 and 48% capacity retention for ordered LiNi(0.5)Mn(1.5)O4 after 2000 cycles. We were able to pinpoint that the extended solid-solution region with suppressed phase transformation attributed to the superior electrochemical performance of disordered spinel. This work envisions a strategy for rationally designing stable cathodes for lithium-ion batteries through engineering the atomic structure that extends the solid-solution region and suppresses phase transformation.

An iodide-based Li7P2S8I superionic conductor.

In an example of stability from instability, a Li(7)P(2)S(8)I solid-state Li-ion conductor derived from ß-Li(3)PS(4) and LiI demonstrates electrochemical stability up to 10 V vs Li/Li(+). The oxidation instability of I is subverted via its incorporation into the coordinated structure. The inclusion of I also creates stability with the metallic Li anode while simultaneously enhancing the interfacial kinetics and ionic conductivity. Low-temperature membrane processability enables facile fabrication of dense membranes, making this conductor suitable for industrial adoption.

TiO2 Microboxes with Controlled Internal Porosity for High-Performance Lithium Storage.

Titanium dioxide (TiO2) is considered a promising anode material for high-power lithium ion batteries (LIBs) because of its low cost, high thermal/chemical stability, and good safety performance without solid electrolyte interface formation. However, the poor electronic conductivity and low lithium ion diffusivity of TiO2 result in poor cyclability and lithium ion depletion at high current rates, which hinder them from practical applications. Herein we demonstrate that hierarchically structured TiO2 microboxes with controlled internal porosity can address the aforementioned problems for high-power, long-life LIB anodes. A self-templating method for the synthesis of mesoporous microboxes was developed through Na2 EDTA-assisted ion exchange of CaTiO3 microcubes. The resulting TiO2 nanorods were organized into microboxes that resemble the microcube precursors. This nanostructured TiO2 material has superior lithium storage properties with a capacity of 187 mAh g(-1) after 300 cycles at 1 C and good rate capabilities up to 20 C.

Excellent stability of a lithium-ion-conducting solid electrolyte upon reversible Li(+) /H(+) exchange in aqueous solutions.

Batteries with an aqueous catholyte and a Li metal anode have attracted interest owing to their exceptional energy density and high charge/discharge rate. The long-term operation of such batteries requires that the solid electrolyte separator between the anode and aqueous solutions must be compatible with Li and stable over a wide pH range. Unfortunately, no such compound has yet been reported. In this study, an excellent stability in neutral and strongly basic solutions was observed when using the cubic Li7 La3 Zr2 O12 garnet as a Li-stable solid electrolyte. The material underwent a Li(+) /H(+) exchange in aqueous solutions. Nevertheless, its structure remained unchanged even under a high exchange rate of 63.6 %. When treated with a 2 M LiOH solution, the Li(+) /H(+) exchange was reversed without any structural change. These observations suggest that cubic Li7 La3 Zr2 O12 is a promising candidate for the separator in aqueous lithium batteries.

Pushing the theoretical limit of Li-CF(x) batteries: a tale of bifunctional electrolyte.

In a typical battery, the inert electrolyte functions solely as the ionic conductor without contribution to the cell capacity. Here we demonstrate that the most energy-dense Li-CF(x) battery delivers a capacity exceeding the theoretical maximum of CF(x) with a solid electrolyte of Li3PS4 (LPS) that has dual functions: as the inert electrolyte at the anode and the active component at the cathode. Such a bifunctional electrolyte reconciles both inert and active characteristics through a synergistic discharge mechanism of CF(x) and LPS. The synergy at the cathode is through LiF, the discharge product of CF(x), which activates the electrochemical discharge of LPS at a close electrochemical potential of CF(x). Therefore, the solid-state Li-CF(x) batteries output 126.6% energy beyond their theoretic limits without compromising the stability of the cell voltage. The additional energy comes from the electrochemical discharge of LPS, the inert electrolyte. This bifunctional electrolyte revolutionizes the concept of conventional batteries and opens a new avenue for the design of batteries with unprecedented energy density.

Electron-Sponge Nature of Polyoxometalates for Next-Generation Electrocatalytic Water Splitting and Nonvolatile Neuromorphic Devices.

Designing next-generation molecular devices typically necessitates plentiful oxygen-bearing sites to facilitate multiple-electron transfers. However, the theoretical limits of existing materials for energy conversion and information storage devices make it inevitable to hunt for new competitors. Polyoxometalates (POMs), a unique class of metal-oxide clusters, have been investigated exponentially due to their structural diversity and tunable redox properties. POMs behave as electron-sponges owing to their intrinsic ability of reversible uptake-release of multiple electrons. In this review, numerous POM-frameworks together with desired features of a contender material and inherited properties of POMs are systematically discussed to demonstrate how and why the electron-sponge-like nature of POMs is beneficial to design next-generation water oxidation/reduction electrocatalysts, and neuromorphic nonvolatile resistance-switching random-access memory devices. The aim is to converge the attention of scientists who are working separately on electrocatalysts and memory devices, on a point that, although the application types are different, they all hunt for a material that could exhibit electron-sponge-like feature to realize boosted performances and thus, encouraging the scientists of two completely different fields to explore POMs as imperious contenders to design next-generation nanodevices. Finally, challenges and promising prospects in this research field are also highlighted.

Sr-induced Fermi Engineering of ß-FeOOH for Multifunctional Catalysis.

Designing a multifunctional electrocatalyst to produce H2 from water, urea, urine, and wastewater, is highly desirable yet challenging because it demands precise Fermi-engineering to realize stronger π-donation from O 2p to electron(e- )-deficient metal (t2g ) d-orbitals. Here a Sr-induced phase transformed ß-FeOOH/α-Ni(OH)2 catalyst anchored on Ni-foam (designated as pt-NFS) is introduced, where Sr produces plenteous Fe4+ (Fe3+ → Fe4+ ) to modulate Fermi level and e- -transfer from e- -rich Ni3+ (t2g )-orbitals to e- -deficient Fe4+ (t2g )-orbitals, via strong π-donation from the π-symmetry lone-pair of O bridge. pt-NFS utilizes Fe-sites near the Sr-atom to break the H─O─H bonds and weakens the adsorption of *O while strengthening that of *OOH, toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Invaluably, Fe-sites of pt-NFS activate H2 -production from urea oxidation reaction (UOR) through a one-stage pathway which, unlike conventional two-stage pathways with two NH3 -molecules, involves only one NH3 -molecule. Owing to more suitable kinetic energetics, pt-NFS requires 133 mV (negative potential shift), 193 mV, ≈1.352 V, and ≈1.375 V versus RHE for HER, OER, UOR, and human urine oxidation, respectively, to reach the benchmark 10 mA cm-2 and also demonstrates remarkable durability of over 25 h. This work opens a new corridor to design multifunctional electrocatalysts with precise Fermi engineering through d-band modulation.

Bi-Directional H-Bonding Modulated Soft/Hard Polyethylene Glycol-Polyaniline Coated Si-Anode for High-Performance Li-Ion Batteries.

Ultrahigh-capacity silicon (Si) anodes are essential for the escalating energy demands driven by the booming e-transportation and energy storage field. However, their practical applications are strictly hampered by their intrinsically low electroconductivity, sluggish Li-ion diffusion, and undesirably large volume change. Herein, a high-performance Si anode, comprised of a modulated soft/hard coating of polyethylene glycol (PEG) (as Li-ion conductor) and polyaniline (PANI) (as electron conductor) on the surface of Si nanoparticles (NPs) through H-bonding network, is introduced. In this design, the abundant ─OH groups of soft PEG allow it to uniformly cover Si NPs while the hard PANI binds to PEG through its ─N─H group, thus constructing a tight connectin between Si and PEG-PANI (PP). Consequently, the elastic PP allows Si@PP to accommodate the huge volume expansion while possessing fine electronic/ionic conductivity. Therefore, the Si@PP anode exhibits a high initial Coulombic efficiency of 90.5% and a stable capacity of 1871 mAh g-1 after 100 cycles at 1 A g-1 with a retention of 85.7%. Additionally, the Si@PP anode also demonstrates a high areal capacity of 3.01 mAh cm-2 after 100 cycles at 0.5 A g-1 . This work reveals a scalable interface design of multi-layer multifunctional coatings for high-performance electrode materials in next-generation Li-ion batteries.

Anomalous high ionic conductivity of nanoporous ß-Li3PS4.

Lithium-ion-conducting solid electrolytes hold promise for enabling high-energy battery chemistries and circumventing safety issues of conventional lithium batteries. Achieving the combination of high ionic conductivity and a broad electrochemical window in solid electrolytes is a grand challenge for the synthesis of battery materials. Herein we show an enhancement of the room-temperature lithium-ion conductivity by 3 orders of magnitude through the creation of nanostructured Li(3)PS(4). This material has a wide electrochemical window (5 V) and superior chemical stability against lithium metal. The nanoporous structure of Li(3)PS(4) reconciles two vital effects that enhance the ionic conductivity: (1) the reduction of the dimensions to a nanometer-sized framework stabilizes the high-conduction ß phase that occurs at elevated temperatures, and (2) the high surface-to-bulk ratio of nanoporous ß-Li(3)PS(4) promotes surface conduction. Manipulating the ionic conductivity of solid electrolytes has far-reaching implications for materials design and synthesis in a broad range of applications, including batteries, fuel cells, sensors, photovoltaic systems, and so forth.

Lithium polysulfidophosphates: a family of lithium-conducting sulfur-rich compounds for lithium-sulfur batteries.

Sulfur-rich lithium polysulfidophosphates (LPSPs) act as an enabler for long-lasting and efficient lithium-sulfur batteries. LPSPs have ionic conductivities of 3.0×10(-5)  S cm(-1) at 25 °C, which is 8 orders of magnitude higher than that of Li2S. The high lithium ion conductivity imparts excellent cycling performance, and the batteries are configured in an all-solid state, which promises safe cycling with metallic lithium anodes.

Revealing Lithium Configuration in Aged Layered Oxides for Effective Regeneration.

Layered oxides LiNixCoyMnzO2 are widely used as the main cathode material for high-energy lithium-ion batteries. Over long-term cycling, irreversible phase transformations in layered oxides usually occur along with the loss of active lithium, which directly reflects in the sharp decrease of capacity. However, it is difficult to accurately and rapidly determine lithium content in aged materials, raising extreme impediments in the direct recycling of layered oxides. Herein, we propose a facile method for quick and accurate calculation of the residual lithium content through the developed relationship of shear strain and the states of charge. Based on this recognization, a discharge capacity close to the original capacity of the pristine material is achieved in the regenerated material by combining a hydrothermal method with annealing treatment. The recycled material demonstrates a dramatic improvement in electrochemical properties, especially the high rate performance. This method not only effectively realizes the quantitative regeneration of cathode materials but also provides a possible strategy for the future development of direct regeneration.