Anchoring Fe Species on the Highly Curved Surface of S and N Co-Doped Carbonaceous Nanosprings for Oxygen Electrocatalysis and a Flexible Zinc-Air Battery.

Oxygen reduction reaction (ORR) is of critical significance in the advancement of fuel cells and zinc-air batteries. The iron-nitrogen (Fe-Nx ) sites exhibited exceptional reactivity towards ORR. However, the task of designing and controlling the local structure of Fe species for high ORR activity and stability remains a challenge. Herein, we have achieved successful immobilization of Fe species onto the highly curved surface of S, N co-doped carbonaceous nanosprings (denoted as FeNS/Fe3 C@CNS). The induction of this twisted configuration within FeNS/Fe3 C@CNS arose from the assembly of chiral templates. For electrocatalytic ORR tests, FeNS/Fe3 C@CNS exhibits a half-wave potential (E1/2 ) of 0.91 V in alkaline medium and a E1/2 of 0.78 V in acidic medium. The Fe single atoms and Fe3 C nanoparticles are coexistent and play as active centers within FeNS/Fe3 C@CNS. The highly curved surface, coupled with S substitution in the coordination layer, served to reduce the energy barrier for ORR, thereby enhancing the intrinsic catalytic activity of the Fe single-atom sites. We also assembled a wearable flexible Zn-air battery using FeNS/Fe3 C@CNS as electrocatalysts. This work provides new insights into the construction of highly curved surfaces within carbon materials, offering high electrocatalytic efficacy and remarkable performance for flexible energy conversion devices.

Helical Anatase Titanium Nanotubes through a Protected Crystallization Strategy for Enhanced Photocatalytic Performance.

Helical structure in catalysts has attracted attention and been recently investigated for various catalytic reactions. However, helical transition metal oxides suffer from uncontrollable crystallization processes at high temperatures when being transformed from an amorphous phase into a crystalline structure. Herein, we report a helical anatase TiO2 nanotube for the first time, which has been prepared using a protected crystallization strategy in the confined space of silica. A single chirality of helical TiO2 has been used to track the ordering of the twisted structure. The twisted structure in helical anatase TiO2 nanotube is maintained after a vigorous crystallization process. Helical anatase TiO2 nanotubes possess more accessible active sites and abundant defects of oxygen vacancy and Ti3+ species owing to the twisted structure. The obtained helical anatase TiO2 nanotube exhibits superior photocatalytic activity for hydrogen production without adding any co-catalysts. This work provides new insights into the role of helical structure in transition metal-based catalysts.

Large-area Free-standing Metalloporphyrin-based Covalent Organic Framework Films by Liquid-air Interfacial Polymerization for Oxygen Electrocatalysis.

Synthesizing large-area free-standing covalent organic framework (COF) films is of vital importance for their applications but is still a big challenge. Herein, we reported the synthesis of large metalloporphyrin-based COF films and their applications for oxygen electrocatalysis. The reaction of meso-benzohydrazide-substituted metal porphyrins with tris-aldehyde linkers afforded free-standing COF films at the liquid-air interface. These films can be scaled up to 3000 cm2 area and display great mechanical stability and structural integrity. Importantly, the Co-porphyrin-based films are efficient for electrocatalytic O2 reduction and evolution reactions. A flexible, all-solid-state Zn-air battery was assembled using the films and showed high performance with a charge-discharge voltage gap of 0.88 V at 1 mA cm-2 and high stability under bent conditions (0° to 180°). This work thus presents a strategy to synthesize functionalized COF films with high quality for uses in flexible electronics.

The Role of Surface Curvature in Electrocatalysts.

Excessive consumption of fossil fuels has caused unavoidable environmental problems. The development of renewable and clean alternatives is essential for the sustainable and green development of human society. Electrocatalysts are most important parts in these energy-related devices. Recently, scientists found that the surface curvature of electrocatalysts could play an important role for the improvement of catalytic performance and the optimization of intrinsic catalytic activity during electrocatalytic process. The role of surface curvature in electrocatalysts is still under investigating. In this minireview, we summarized the latest progress of electrocatalysts with different surface curvatures and their applications in energy-related applications. This review mainly involves the strategies for preparation of electrocatalysts with different surface curvatures, three typical electrocatalysts with different surface curvatures (curled surface, onion-like structure, and spiral structure), and the potential mechanisms that surface curvature in electrocatalysts affects activities.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide.

Porphyrin-based frameworks, as specific kinds of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in energy-related conversion processes, including the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and CO2 reduction reaction (CO2RR), and also in energy-related storage technologies such as rechargeable Zn-air batteries. This review starts by summarizing typical crystal structures, molecular building blocks, and common synthetic procedures of various porphyrin-based frameworks used in energy-related technologies. Then, a brief introduction is provided and representative applications of porphyrin-based frameworks in ORR, OER, Zn-air batteries, and CO2RR are discussed. The performance comparison of these porphyrin-based frameworks in each field is also summarized and discussed, which pinpoints a clear structure-activity relationship. In addition to utilizing highly active porphyrin units for catalytic conversions, regulating the porous structures of porphyrin-based frameworks will enhance mass transfer and growing porphyrin-based frameworks on conductive supports will accelerate electron transfer, which will result in the improvement of the electrocatalytic performance. This review is therefore valuable for the rational design of more efficient porphyrin-based framework catalytic systems in energy-related conversion and storage technologies.

Metal-Corrole-Based Porous Organic Polymers for Electrocatalytic Oxygen Reduction and Evolution Reactions.

Integrating molecular catalysts into designed frameworks often enables improved catalysis. Compared with porphyrin-based frameworks, metal-corrole-based frameworks have been rarely developed, although monomeric metal corroles are usually more efficient than porphyrin counterparts for the electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). We herein report on metal-corrole-based porous organic polymers (POPs) as ORR and OER electrocatalysts. M-POPs (M=Mn, Fe, Co, Cu) were synthesized by coupling metal 10-phenyl-5,15-(4-iodophenyl)corrole with tetrakis(4-ethynylphenyl)methane. Compared with metal corrole monomers, M-POPs displayed significantly enhanced catalytic activity and stability. Co-POP outperformed other M-POPs by achieving four-electron ORR with a half-wave potential of 0.87 V vs. RHE and reaching 10 mA cm-2 OER current density at 340 mV overpotential. This work is unparalleled to develop and explore metal-corrole-based POPs as electrocatalysts.

Highly Curved Nanostructure-Coated Co, N-Doped Carbon Materials for Oxygen Electrocatalysis.

Nitrogen-doped graphene could catalyze the electrochemical reduction and evolution of oxygen, but unfortunately suffers from sluggish catalytic kinetics. Herein, for the first time, we report an onion-like carbon coated Co, N-doped carbon (OLC/Co-N-C) material, which possesses multilayers of highly curved nanostructures that form mesoporous architectures. These unique nanospheres are produced when surfactant micelles are introduced to synthesis precursors. Owing to the combined electronic effect and nanostructuring effect, our OLC/Co-N-C materials exhibit high bifunctional oxygen reduction/evolution reaction (ORR/OER) activity, showing a promising application in rechargeable Zn-air batteries. Experimental results are rationalized by theoretical calculations, showing that the curvature of graphitic carbon plays a vital role in promoting activities of meta-carbon atoms near graphitic N and ortho/meta carbon atoms close to pyridinic N.

Metal-Organic-Framework-Supported Molecular Electrocatalysis for the Oxygen Reduction Reaction.

Synthesizing molecule@support hybrids is appealing to improve molecular electrocatalysis. We report herein metal-organic framework (MOF)-supported Co porphyrins for the oxygen reduction reaction (ORR) with improved activity and selectivity. Co porphyrins can be grafted on MOF surfaces through ligand exchange. A variety of porphyrin@MOF hybrids were made using this method. Grafted Co porphyrins showed boosted ORR activity with large (>70 mV) anodic shift of the half-wave potential compared to ungrafted porphyrins. By using active MOFs for peroxide reduction, the number of electrons transferred per O2 increased from 2.65 to 3.70, showing significantly improved selectivity for the 4e ORR. It is demonstrated that H2 O2 generated from O2 reduction at Co porphyrins is further reduced at MOF surfaces, leading to improved 4e ORR. As a practical demonstration, these hybrids were used as air electrode catalysts in Zn-air batteries, which exhibited equal performance to that with Pt-based materials.

A Porphyrinic Zirconium Metal-Organic Framework for Oxygen Reduction Reaction: Tailoring the Spacing between Active-Sites through Chain-Based Inorganic Building Units.

The oxygen reduction reaction (ORR) is central in carbon-neutral energy devices. While platinum group materials have shown high activities for ORR, their practical uses are hampered by concerns over deactivation, slow kinetics, exorbitant cost, and scarce nature reserve. The low cost yet high tunability of metal-organic frameworks (MOFs) provide a unique platform for tailoring their characteristic properties as new electrocatalysts. Herein, we report a new concept of design and present stable Zr-chain-based MOFs as efficient electrocatalysts for ORR. The strategy is based on using Zr-chains to promote high chemical and redox stability and, more importantly, tailor the immobilization and packing of redox active-sites at a density that is ideal to improve the reaction kinetics. The obtained new electrocatalyst, PCN-226, thereby shows high ORR activity. We further demonstrate PCN-226 as a promising electrode material for practical applications in rechargeable Zn-air batteries, with a high peak power density of 133 mW cm-2. Being one of the very few electrocatalytic MOFs for ORR, this work provides a new concept by designing chain-based structures to enrich the diversity of efficient electrocatalysts and MOFs.

The NHx Group Induced Formation of 3D α-Co(OH)2 Curly Nanosheet Aggregates as Efficient Oxygen Evolution Electrocatalysts.

Recently, the curly structure attracts researchers' attention due to the strain effect, electronic effect, and improved surface area, which exhibits enhanced electrocatalytic activity. However, the synthesis of metastable curved structures is very difficult. Herein, a simple room temperature coprecipitation method is proposed to synthesize 3D cobalt (Co) hydroxide (α-Co(OH)2 ) electrocatalysts that consist of curly 2D nanosheets. The formation process of curly nanosheets is elaborated systematically and the results demonstrate that the NHx group has great effect on the formation of curly structure. Combining the advantage of 2D curly nanosheet and 3D aggregate structure, the as-prepared α-Co(OH)2 curly nanosheet aggregates show the best water oxidation activity with an overpotential of 269 mV at j = 10 mA cm-2 in 1.0 m KOH. The electrocatalytic process studies demonstrate that the formation of CoIV O species is the rate-determining step. Theoretical calculations further confirm the beneficial effect of the bent structure on the conductivity, the adsorption of OH- and the formation of OOH* species.

Hollow Bimetallic Zinc Cobalt Phosphosulfides for Efficient Overall Water Splitting.

Bimetallic sulfides with earth-abundant transition-metal elements are proposed to enhance the electrocatalytic activities. Further replacement of S atom by less electronegative P atom improves the electrocatalytic performance of OER and HER. Herein, hollow bimetallic zinc cobalt phosphosulfides (Zn0.3 Co2.7 S3 P) are synthesized by a two-step process. The optimal catalyst of Zn0.3 Co2.7 S3 P with particle size of 50 nm displays an excellent electroactivity and long-term durability toward efficient overall water splitting process in alkaline medium. The excellent bifunctional electrocatalytic performance may be ascribed to the synergistic effect of hollow structure, anion substitution tuning and unique size control.

2D Metal-Organic Framework Derived CuCo Alloy Nanoparticles Encapsulated by Nitrogen-Doped Carbonaceous Nanoleaves for Efficient Bifunctional Oxygen Electrocatalyst and Zinc-Air Batteries.

The development of efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) still remains a challenge in a wide range of renewable energy technologies. Herein, CuCo alloy nanoparticles encapsulated by nitrogen-doped carbonaceous nanoleaves (CuCo-NC) have been synthesized from a Cu(OH)2 /2D leaf-like zeolitic imidazolate framework (ZIF-L)-pyrolysis approach. Leaf-like Cu(OH)2 is first prepared by the ultrasound-induced self-assembly of Cu(OH)2 nanowires. The efficient encapsulation of Cu(OH)2 in ZIF-L is obtained owing to the morphology fitting between the leaf-like Cu(OH)2 and ZIF-L. CuCo-NC catalysts present superior electrocatalytic activity and stability toward ORR and OER over the commercial Pt/C and IrO2 , respectively, which are further used as bifunctional oxygen electrocatalysts in Zn-air batteries and exhibit impressive performance, with a high peak power density of 303.7 mW cm-2 , large specific capacity of up to 751.4 mAh g-1 at 20 mA cm-2 , and a superior recharge stability.

Ultra-thin Co-Fe Layered Double Hydroxide Hollow Nanocubes for Efficient Electrocatalytic Water Oxidation.

Hierarchical hollow nanocubes based on ultra-thin CoFe-layered double hydroxide (CoFe-LDH) nanosheets have been prepared. The obtained CoFe-LDH hollow nanocubes could effectively catalyze water oxidation at a low overpotential of 270 mV @ 10 mA cm-2 , low Tafel slope of 58.3 mV dec-1 and show a long-term stability in alkali.

Cobalt-Nitrogen-Doped Helical Carbonaceous Nanotubes as a Class of Efficient Electrocatalysts for the Oxygen Reduction Reaction.

The oxygen reduction reaction (ORR) is of significant importance in the development of fuel cells. Now, cobalt-nitrogen-doped chiral carbonaceous nanotubes (l/d-CCNTs-Co) are presented as efficient electrocatalysts for ORR. The chiral template, N-stearyl-l/d-glutamic acid, induces the self-assembly of well-arranged polypyrrole and the formation of ordered graphene carbon with helical structures at the molecular level after the pyrolysis process. Co was subsequently introduced through the post-synthesis method. The obtained l/d-CCNTs-Co exhibits superior ORR performance, including long-term stability and better methanol tolerance compared to achiral Co-doped carbon materials and commercial Pt/C. DFT calculations demonstrate that the charges on the twisted surface of l/d-CCNTs are widely separated; as a result the Co atoms are more exposed on the chiral CCNTs. This work gives us a new understanding of the effects of helical structures in electrocatalysis.

Structural Correspondence of the Oriented Attachment Growth Mechanism of Crystals of the Pharmaceutical Dirithromycin.

The oriented attachment (OA) mechanism is promising for designing novel nanomaterials, yet an intensive understanding of the relationship between the crystal structure and attachment orientation is still lacking. In this work, we report layered hexagonal crystals of the pharmaceutical dirithromycin (DIR) containing multiple layers fabricated via a solvothermal method for a certain period of time at 40 °C. These elongated hexagonal crystals experience an OA that is preferentially on the face (001) of the initial crystals to assemble the final crystals into layered stacks. Through agreement with molecular modeling calculations, we predicted the final crystal growth morphology and confirmed the favored attachment surface based on the energy change ΔE following an OA event. These simulation results at the molecular level yielded good agreement with the crystal growth experiments. This study demonstrates the critical importance of combining experiments with a computational approach to understand the intrinsic molecular details of the OA growth mechanism of other compounds and to design nanomaterials with a desirable morphology and physical and chemical properties.

Hierarchically porous aggregates of Co-N-C nanoparticles for oxygen electrocatalysis.

Herein, a novel assembled Co-N-C (A-Co-N-C) material was reported for the first time by pyrolyzing zeolitic imidazolate framework-67 (ZIF-67) nanoparticle aggregates caused by the introduction of surfactant polystyrene sulfonic acid (PSS). The A-Co-N-C has a large surface area of 455 m2 g-1 with micropores (101 m2 g-1) and mesopores (354 m2 g-1). The A-Co-N-C exhibits good bifunctional catalytic oxygen reduction/evolution reaction (ORR/OER) and Zn-air battery activity. This work provides a simple but efficient strategy for constructing hierarchically porous aggregates of Co-N-C nanoparticles.

A twisted carbonaceous nanotube as the air-electrode for flexible Zn-Air batteries.

Exploring electrocatalysts with high-efficiency oxygen reduction reaction (ORR) is significant for practical applications of fuel cells and metal-air batteries. In this work, a twisted core@shell material has been prepared with helical polypyrrole nanotubes (HPPys) as the core and coordination polymers (CPs) as the shell. After the pyrolysis process, a dense twisted carbon layer was formed by the reaction of CP and HPPy at its interface under Ar. The derived twisted carbonaceous nanotube exhibits good performance in both electrocatalytic ORR and OER. When used as the air-electrode in a flexible Zn-air battery, the battery shows good performance and stability.

A helical polypyrrole nanotube interwoven zeolitic imidazolate framework and its derivative as an oxygen electrocatalyst.

A helical polypyrrole nanotube interwoven zeolitic imidazolate framework (ZIF) has been prepared for the first time. After pyrolysis, the helical carbon could act as highly active sites, while the 3D-connected nanoarchitecture contributed to fast charge transfer. The derived carbon material exhibits high activity for the ORR and good performance for a Zn-air battery.

Space-confined construction of two-dimensional nitrogen-doped carbon with encapsulated bimetallic nanoparticles as oxygen electrocatalysts.

A space-confined strategy has been used to control the pyrolysis of two-dimensional (2D) NiCo-MOF@ZIF-L(Zn). A thin SiO2 layer as a confined space could avoid the destruction of the 2D morphology during pyrolysis and expose more active sites. The obtained NiCo-NC material exhibits high ORR and Zn-air battery performance.