Apoptosis-associated speck-like protein containing a caspase-1 recruitment domain (ASC) contributes to osteoblast differentiation and osteogenesis.

The role of apoptosis-associated speck-like protein containing a caspase-1 recruitment domain (ASC) in bone healing remains to be understood. To address this issue, we investigated the requirement of inflammasome-related genes in response to bone morphogenetic protein 7 (BMP7)-induced osteoblast differentiation in vitro. To validate the importance of ASC on osteogenesis, we subjected wild-type (WT) and ASC knockout C57BL/6 mice (ASC KO) to tibia defect to evaluate the bone healing process (up to 28 days). Our in vitro data showed that there is an involvement of ASC during BMP7-induced osteoblast differentiation, concomitant to osteogenic biomarker expression. Indeed, primary osteogenic cells from ASC KO presented a lower osteogenic profile than those obtained from WT mice. To validate this hypothesis, we evaluated the bone healing process of tibia defects on both WT and ASC KO mice genotypes and the ASC KO mice were not able to fully heal tibia defects up to 28 days, whereas WT tibia defects presented a higher bone de novo volume at this stage, evidencing ASC as an important molecule during osteogenic phenotype. In addition, we have shown a higher involvement of runt-related transcription factor 2 in WT sections during bone repair, as well as circulating bone alkaline phosphatase isoform when both were compared with ASC KO mice behavior. Altogether, our results showed for the first time the involvement of inflammasome during osteoblast differentiation and osteogenesis, which opens new avenues to understand the pathways involved in bone healing.

Impact of Weight Loss With Intragastric Balloon on Bone Density and Microstructure in Obese Adults.

The historical concept that obesity protects against bone fractures has been questioned. Weight loss appears to reduce bone mineral density (BMD); however, the results in young adults are inconsistent, and data on the effects of weight loss on bone microstructure are limited. This study aimed to evaluate the impact of weight loss using an intragastric balloon (IGB) on bone density and microstructure. Forty obese patients with metabolic syndrome (mean age 35.1 ± 7.3 yr) used an IGB continuously for 6 mo. Laboratory tests, areal BMD, and body composition measurements via dual-energy X-ray absorptiometry, and volumetric BMD and bone microstructure measurements via high-resolution peripheral quantitative computed tomography were conducted before IGB placement and after IGB removal. The mean weight loss was 11.5%. After 6 mo, there were significant increases in vitamin D and carboxyterminal telopeptide of type 1 collagen levels. After IGB use, areal BMD increased in the spine but decreased in the total femur and the 33% radius. Cortical BMD increased in the distal radius but tended to decrease in the distal tibia. The observed trabecular bone loss in the distal tibia contributed to the decline in the total volumetric BMD at this site. There was a negative correlation between the changes in leptin levels and the measures of trabecular quality in the tibia on high-resolutionperipheral quantitative computed tomography. Weight loss may negatively impact bone microstructure in young patients, especially for weight-bearing bones, in which obesity has a more prominent effect.

Brain shape convergence in the adaptive radiation of New World monkeys.

Primates constitute one of the most diverse mammalian clades, and a notable feature of their diversification is the evolution of brain morphology. However, the evolutionary processes and ecological factors behind these changes are largely unknown. In this work, we investigate brain shape diversification of New World monkeys during their adaptive radiation in relation to different ecological dimensions. Our results reveal that brain diversification in this clade can be explained by invoking a model of adaptive peak shifts to unique and shared optima, defined by a multidimensional ecological niche hypothesis. Particularly, we show that the evolution of convergent brain phenotypes may be related to ecological factors associated with group size (e.g., social complexity). Together, our results highlight the complexity of brain evolution and the ecological significance of brain shape changes during the evolutionary diversification of a primate clade.

HR-pQCT detects alterations in bone microstructure in men with CKD stages 3 and 4, which are influenced by hormonal changes and body composition
.

INTRODUCTION: Factors associated with osteodystrophy in predialysis patients are poorly understood. In the present study, we attempted to evaluate the impact of body composition and hormonal regulatory factors on the bone microstructure in a group of men with chronic kidney disease (CKD) stages 3 and 4. MATERIALS AND METHODS: 46 men, aged 50 - 75 years, with previously unrecognized CKD were evaluated by high-resolution peripheral quantitative computed tomography (HR-pQCT), and dual-energy X-ray absorptiometry (DXA). HR-pQCT parameters were correlated with estimated glomerular filtration rate (eGFR), age, body mass index (BMI), muscle mass index (MMI), and biochemistry. RESULTS: As compared to patients in stage 3 CKD, those with stage 4 CKD showed lower serum 25-hydroxyvitamin D (25(OH)D) and bicarbonate levels, and higher serum fibroblast growth factor 23 (FGF-23) and parathyroid hormone (PTH) levels. They also exhibited lower total, trabecular, and cortical volumetric bone mineral density, lower trabecular bone volume/tissue volume, trabecular number, trabecular and cortical thickness, and increased heterogeneity of the trabecular network. In the whole cohort, cortical bone density and thickness were negatively associated with age, PTH, and FGF-23, and positively with BMI. Trabecular bone parameters were positively associated with MMI and 25(OH)D. After simultaneously adjusting for age and eGFR, BMI, and MMI remained significantly associated with bone microstructural variables. CONCLUSION: HR-pQCT showed significant differences in bone microstructure in stage 4 vs. stage 3 CKD patients. Increased BMI, probably due to increased muscle mass, may favorably affect bone architecture in predialysis CKD patients.
.

Bone mineral density and bone microarchitecture after long-term suppressive levothyroxine treatment of differentiated thyroid carcinoma in young adult patients.

Bone mineral density (BMD) seems not to be decreased in young patients given long-term suppressive doses of levothyroxine (LT4), but information regarding the bone microstructure in these patients is lacking. The aim of this study was to determine whether supraphysiologic doses of LT4, initiated during childhood or adolescence for treatment of differentiated thyroid carcinoma (DTC), have any detrimental effects on bone microarchitecture as evaluated by high-resolution peripheral quantitative computed tomography (HR-pQCT). Seventeen patients (27.3 ± 7.1 years old) with DTC with subclinical hyperthyroidism since adolescence and 34 healthy volunteers matched for age, sex, and body mass index were studied by dual-energy X-ray absorptiometry (DXA) to determine the areal BMD at the lumbar spine, hip, and proximal third of the radius. Volumetric BMD and structural parameters of the trabecular and cortical bone were assessed by HR-pQCT of the distal radius and distal tibia. DTC patients were given suppressive doses of LT4 starting at a mean age of 12.6 years, and the mean duration of treatment was 14.2 years. In DTC patients, clinical parameters did not correlate with DXA or HR-pQCT parameters. No differences were found between the patients and controls with respect to BMD and Z scores at any site evaluated by DXA, and no differences were found in the bone microstructure parameters evaluated by HR-pQCT. This cross-sectional study suggests that long-standing suppressive therapy with LT4 during the attainment of peak bone mass may have no significant adverse effects on bone density or microarchitecture.

Bone density and microarchitecture in endogenous hypercortisolism.

OBJECTIVE: Osteoporosis is a serious and underestimated complication of endogenous hypercortisolism that results in an increased risk of fractures, even in patients with normal or slightly decreased bone mineral density (BMD). Alterations in bone microarchitecture, a very important component of bone quality, may explain bone fragility. The aim of this study was to investigate bone density and microarchitecture in a cohort of patients with endogenous Cushing's syndrome (CS). DESIGN: Cross-sectional study. PATIENTS: Thirty patients with endogenous active CS and fifty-one age-, sex- and body mass index-matched controls were included. MEASUREMENTS: Participants were studied for areal BMD (dual-energy X-ray absorptiometry) of the lumbar spine (LS), femoral neck (FN), total femur (TF) and radius (33%), and for volumetric bone density (vBMD) and structure using high-resolution peripheral quantitative computed tomography (HR-pQCT) of the distal radius and distal tibia. RESULTS: Patients with active CS exhibited lower areal BMD and Z-score values in the LS, FN and TF (P < 0·003 for all comparisons). At HR-pQCT, the patients with CS also had lower cortical area (P = 0·009 at the radius and P = 0·002 at the tibia), lower cortical thickness (P = 0·02 at the radius and P = 0·002 at the tibia), lower cortical density (P = 0·008 at the tibia) and lower total vBMD (P = 0·002 at the tibia). After the exclusion of hypogonadal individuals, the patients with CS maintained the same microarchitectural and densitometric alterations described above. CONCLUSIONS: Endogenous hypercortisolism has deleterious effects on bone, especially on cortical bone microstructure. These effects seem to be a more important determinant of bone impairment than gonadal status.

Encephalization and diversification of the cranial base in platyrrhine primates.

The cranial base, composed of the midline and lateral basicranium, is a structurally important region of the skull associated with several key traits, which has been extensively studied in anthropology and primatology. In particular, most studies have focused on the association between midline cranial base flexion and relative brain size, or encephalization. However, variation in lateral basicranial morphology has been studied less thoroughly. Platyrrhines are a group of primates that experienced a major evolutionary radiation accompanied by extensive morphological diversification in Central and South America over a large temporal scale. Previous studies have also suggested that they underwent several evolutionarily independent processes of encephalization. Given these characteristics, platyrrhines present an excellent opportunity to study, on a large phylogenetic scale, the morphological correlates of primate diversification in brain size. In this study we explore the pattern of variation in basicranial morphology and its relationship with phylogenetic branching and with encephalization in platyrrhines. We quantify variation in the 3D shape of the midline and lateral basicranium and endocranial volumes in a large sample of platyrrhine species, employing high-resolution CT-scans and geometric morphometric techniques. We investigate the relationship between basicranial shape and encephalization using phylogenetic regression methods and calculate a measure of phylogenetic signal in the datasets. The results showed that phylogenetic structure is the most important dimension for understanding platyrrhine cranial base diversification; only Aotus species do not show concordance with our molecular phylogeny. Encephalization was only correlated with midline basicranial flexion, and species that exhibit convergence in their relative brain size do not display convergence in lateral basicranial shape. The evolution of basicranial variation in primates is probably more complex than previously believed, and understanding it will require further studies exploring the complex interactions between encephalization, brain shape, cranial base morphology, and ecological dimensions acting along the species divergence process.

Influence of bone architecture on the primary stability of different mini-implant designs.

INTRODUCTION: Mechanical interlocking between a mini-implant (MI) and the bone substrate reflects directly on the primary stability achieved. The purposes of this study were to evaluate MI design performance in distinct bone substrates and correlate geometric characteristics with insertion site quality. METHODS: Two types of self-drilling MIs (1.6 × 8 mm) were allocated to 2 groups according to their geometric designs: Tomas system (Dentaurum, Ispringen, Germany) and Dual-Top (Rocky Mountain Orthodontics, Denver, Colo). Forty sections (8 × 10 mm) were taken from bovine pelvic ilium and pubic bone. Geometric design characteristics were evaluated using scanning electron microscope imaging and Image-Pro Insight software (Media Cybernetics, Rockville, Md). Bone quality parameters were assessed with a microcomputed tomography system, and primary stability was evaluated by insertion torque and pull-out strength. Intergroup comparisons were performed with analysis of variance and Tukey tests, and the Pearson correlation test was carried out (P <0.05). RESULTS: No significant difference was observed in the comparisons of the groups (Tomas: insertion torque, 12.87 N·cm; pull-out strength, 181 N; and Dual-Top: insertion torque, 9.95 N·cm; pull-out strength, 172.5 N) in the ilium. However, the Tomas group had a marked increase in insertion torque (25.08 N·cm; P <0.05) in the pubic bone. CONCLUSIONS: MI mechanical performance differed according to bone quality parameters, indicating that certain geometric parameters may be set depending on the insertion substrate.

Long-term biocompatibility evaluation of 0.5 % zinc containing hydroxyapatite in rabbits.

This study investigates the long-term biocompatibility of 0.5 % zinc-containing hydroxyapatite compared with hydroxyapatite. Spheres (425 < ∅ < 550) of both materials were produced by extrusion of ceramic slurry in calcium chloride and characterized by FTIR, XRD, XRF and SEM. Fifteen White New Zealand rabbits were submitted to general anesthesia, and an perforation (2 mm), was made in each tibia, one for zinc-containing hydroxyapatite sphere implantation and one for hydroxyapatite sphere implantation. After 26, 52 and 78 weeks, the animals were euthanized, and the fragment containing the biomaterial was harvested. A 30-50 µm section was obtained for histological analysis in bright field and polarized light. SEM images revealed similar morphologies between the tested biomaterials. Histological analysis showed that there was no difference between the test groups. The morphometric analysis, however, indicates that there was a greater absorption. The materials are biocompatible, promote osteogenesis and that the zinc-containing hydroxyapatite microspheres were absorbed more quickly.

Development of a non-invasive method for monitoring variations in salt concentrations of seawater using nuclear technique and Monte Carlo simulation.

In the oil production industry, water is used as a fluid injected into the well to raise the oil when the well is depressurized. Water thus produced presents variations in the concentrations of dissolved salts, as there is a mixture of different types of water, related to its origin (such as connate water, sea water). Because it is reused in oil production, water needs to be monitored to maintain the standard suitable for its use as it can be hypersaline, contributing to the encrustation of pipes and contamination of underground water reservoirs. In this study, a noninvasive method was developed to determine the salt concentration in seawater. The method uses a detection system that contains a NaI(Tl) detector, a241Am source, and a sample holder to measure the mass attenuation coefficient of saltwater samples. For validation, the same setup was also simulated using the MCNPX code. Saltwater samples with different concentrations of NaCl and KBr were used as a proxy for seawater. The mass attenuation coefficients for the simulation exhibited the smallest relative errors (up to 6.2%), and the experimental ones exhibited the highest relative errors (up to 25%) when compared with theoretical values.

Mesiobuccal Root Canal Morphology of Maxillary First Molars in a Brazilian Sub-Population - A Micro-CT Study.

Objective: This study aimed to investigate the root canal system morphology of maxillary first molar mesiobuccal (MB) roots in a Brazilian sub-population using micro-computed tomography. Methods: Ninety-six MB roots were scanned with a micro-CT (Skyscan 1173, Bruker). Three-dimensional images were analyzed regarding the number of pulp chamber orifices, the number and classification of the canals, the presence of accessory canals in different thirds of the root as well as the number and type of apical foramina. Results: A single entrance orifice was found in 53.0% of the samples, two in 43.9% and only 3.1% had three orifices. The second mesiobuccal root canal (MB2) was present at some portion of the root in 87.5% of the specimens. A single apical foramen was present in 16.7%, two in 22.9%, and three or more foramina in 60.4% of the roots. Only 55.3% and 76.1% of the root canals could be arranged by Weine's and Vertucci's classifications, respectively. Conclusion: The number of orifices at the pulp chamber level could not work as a predictor of the MB2 presence. The most prevalent canal configuration was Weine type IV / Vertucci type V. The anatomical complexity of the MB root could not be entirely classified by the current most accepted classifications.

Unveiling the role of bioturbation on bacterial activity in metal-contaminated sediments.

The processes permeating the relationships between bioturbation and microorganisms remain poorly understood due to the difficulty of traditional techniques in quantifying their two- and three-dimensional aspects. We used cutting-edge technologies to address the macro- and microorganisms' interactions under metal-contamination. Bioturbation (mucus-lined gallery perimeter, mucus-lined gallery surface area, and gallery water volume) positively influence the carbohydrate consumption rate by the bacterial consortium, elevating bacterial metabolic activity, despite metal-contamination. Synchrotron-based 2D-µXRF revealed that the mucous lining by marine worm during bioturbation as the primary carbon source enhances metal immobilization by bacterial biofilm, improving the bacterial metabolic activity. Bioturbation thus can positively affect bacterial consortium that can use the mucus as a carbon source, which enhances the resistance to metals through biofilm formation in metal-contaminated sediments.

Monitoring of bacterial community structure and growth: An alternative tool for biofilm microanalysis.

Microorganisms, such as bacteria, tend to aggregate and grow on surfaces, secreting extracellular polymeric substances (EPS), forming biofilms. Biofilm formation is a life strategy, because through it microorganisms can create their own microhabitats. Whether for remediation of pollutants or application in the biomedical field, several methodological approaches are necessary for a more accurate analysis of the role and potential use of bacterial biofilms. The use of computerized microtomography to monitor biofilm growth appears to be an advantageous tool due to its non-destructive character and its ability to render 2D and 3D visualization of the samples. In this study, we used several techniques such as analysis of microbiological parameters and biopolymer concentrations to corroborate porosity quantified by 2D and 3D imaging. Quantification of the porosity of samples by microtomography was verified by increased enzymatic activity and, consequently, higher EPS biopolymer synthesis to form biofilm, indicating growth of the biofilm over 96 â€‹h. Our interdisciplinary approach provides a better understanding of biofilm growth, enabling integrated use of these techniques as an important tool in bioremediation studies of environments impacted by pollutants.

Absenteísmo por covid-19 em profissionais de enfermagem de unidade de terapia intensiva / Absenteeism due to covid-19 in nursing professionals in the intensive care unit / Ausentismo debido al covid-19 em profesionales de enfermería en la unidad de cuidados intensivos

Objetivo: Identificar as variáveis associadas ao absenteísmo por covid-19 avaliando a Qualidade de Vida no Trabalho dos profissionais de enfermagem da Unidade de Terapia Intensiva de um hospital público. Métodos: Estudo de abordagem quantitativa, observacional e retrospectivo, realizada na Unidade de Terapia Intensiva de um hospital público estadual em Manaus, aplicado dois questionários para a coleta de dados. Resultados: O absenteísmo teve influência das seguintes variáveis: técnicos de enfermagem (100%); dois vínculos empregatícios (64%); especialização nível médio ou pós-técnico (50%); renda até dois salários-mínimos (73,9%). Conclusão: Este estudo visa contribuir para o avanço do conhecimento científico por meio das relações entre o absenteísmo e a Covid-19 e, através do índice de Qualidade de Vida busca ajudar na criação de melhorias para a classe da enfermagem e de aspectos organizacionais. (AU)

Objective: To identify the variables associated with absenteeism by covid-19 evaluating the Quality of Life at Work of nursing professionals in the Intensive Care Unit of a public hospital. Methods: A quantitative, observational and retrospective study. The research was carried out in the Intensive Care Unit of a public hospital in Manaus, where two questionnaires were applied for data collection. Results: The absenteeism was influenced by the following variables: nursing technicians (100%); two jobs (64%); medium or post-technical specialization (50%); income up to two minimum wages (73.9%). Conclusion: This study aims to contribute to the advancement of scientific knowledge through the relationship between absenteeism and Covid-19 and, through the Quality of Life index, seeks to help create improvements for the nursing class and organizational aspects. (AU)

Objetivo: Identificar las variables asociadas al absentismo por covid-19 evaluando la Calidad de Vida Laboral de los profesionales de enfermería de la Unidad de Cuidados Intensivos de un hospital público. Métodos: Estudio cuantitativo, observacional y retrospectivo. La investigación se realizó en la Unidad de Cuidados Intensivos de un hospital público de Manaus, donde se aplicaron dos cuestionarios para la recogida de datos. Resultados: En el absentismo influyeron las siguientes variables: técnicos de enfermería (100%); dos empleos (64%); especialización media o postécnica (50%); ingresos de hasta dos salarios mínimos (73,9%). Conclusión: Este estudio pretende contribuir al avance del conocimiento científico a través de la relación entre el absentismo y el Covid-19 y, a través del índice de Calidad de Vida, busca ayudar en la creación de mejoras para la clase de enfermería y los aspectos organizativos. (AU)

Monitoring bioturbation by a small marine polychaete using microcomputed tomography.

Bioturbation is one of the principle biological processes involved in transporting particles and solutes within sediments, which contributes to the maintenance of biodiversity. In muddy polluted environments, bioturbation may increase pollutant flux at the water-sediment interface, thereby enhancing contaminant bioavailability. The behavior of organisms dictates bioturbation, and gallery shape influences the magnitude of solute transport. Thus, quantitative investigations of gallery shape are fundamental to understanding how pollutant and solute transport is enhanced by bioturbators in muddy sediments. However, there is a lack of tools for quantitatively analyzing gallery geometry, especially for assessing bioturbation and gallery properties through time. Despite the potential of microcomputed tomography (µCT) for quantitative analyses of bioturbation, few such studies have been carried out. Here, we aimed to investigate the potential of µCT for quantitatively assessing the shape and geometric properties of galleries made by small marine polychaetes and their evolution through time in muddy sediments. We focused on Laeonereis acuta (Treadwell, 1923) (Nereididae, Polychaeta), which is a key bioturbator in marine coastal ecosystems. Using 2D and 3D images generated from µCT, we evaluated L. acuta galleries and propose several indexes to quantitatively assess gallery evolution and the role of gallery parameters in bioturbation. Quantitative investigations of polychaete galleries using µCT can assist in monitoring how bioturbation influences sedimentary systems.

Histomorphometric evaluation of strontium-containing nanostructured hydroxyapatite as bone substitute in sheep.

The aim of this study is to evaluate the biocompatibility and osteoconductivity in surgical defects of sheep tibias filled with 1% strontium-containing nanostructured hydroxyapatite microspheres (SrHA), stoichiometric hydroxyapatite without strontium microspheres (HA), or blood clots. Santa Ines sheep were subjected to three perforations on the medial side of the left tibia. The biomaterials were characterized by X-ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) before implantation and by X-Ray Microfluorescence (µFRX) and Scanning Electron Microscopy (SEM) after sheep tibias implantation. Surgical defects were filled with blood clots (control), SrHA (Group 1) or HA (Group 2). After 30 days, 5-µm bone blocks were obtained for histological evaluation, and the blocks obtained from 1 animal were embedded in methylmethacrylate for undecalcified sections. Mononuclear inflammatory infiltrate remained mild in all experimental groups. Giant cells were observed surrounding biomaterials particles of both groups and areas of bone formation were detected in close contact with biomaterials. All groups showed newly formed bone from the periphery to the center of the defects, which the control, HA and SrHA presented 36.4% (± 21.8), 31.2% (± 14.7) and 26.2% (± 12.9) of newly formed bone density, respectively, not presenting statistical differences. In addition, the connective tissue density did not show any significant between groups. The SrHA showing a higher volume density of biomaterial (51.2 ± 14.1) present in the defect compared to HA (32.6 ± 8.5) after 30 days (p = 0.03). Microspheres containing 1% SrHA or HA can be considered biocompatible, have osteoconductive properties and may be useful biomaterials for clinical applications.

Influence of Heat Treatment of Nickel-Titanium Rotary Endodontic Instruments on Apical Preparation: A Micro-Computed Tomographic Study.

INTRODUCTION: The aim of this study was to make a 3-dimensional comparison of the canal transportation and changes in apical geometry using micro-computed tomographic imaging after canal preparation with K3 (SybronEndo, Orange, CA) and K3XF (SybronEndo) file systems. METHODS: Twenty-eight mandibular molars were randomly divided into 2 groups according to the rotary system used in instrumentation: K3 or K3XF. The specimens were scanned by micro-computed tomographic imaging before and after instrumentation. Images before and after instrumentation from each group were compared with regard to canal volume, surface area, and structure model index (SMI) (paired t test, P < .05). After instrumentation, the canals from each group were compared regarding the changes in volume, surface area, SMI, and canal transportation in the last 4 apical mm (t test, P < .05). RESULTS: Instrumentation with the 2 rotary systems significantly changed the canal volume, surface area, and SMI (P < .05). There were no significant differences between instrument types concerning these parameters (P > .05). There were no significant differences between the 2 groups with regard to canal transportation in the last 4 apical mm (P > .05). CONCLUSIONS: Both rotary systems showed adequate canal preparations with reduced values of canal transportation. Heat treatment did not influence changes in root canal geometry in the apical region.

Is trabecular bone related to primary stability of miniscrews?

OBJECTIVE: To compare the primary stability of miniscrews inserted into bone blocks of different bone mineral densities (BMDs) with and without cortical bone, and investigate whether some trabecular properties could influence primary stability. MATERIALS AND METHODS: Fifty-two bone blocks were extracted from fresh bovine pelvic bone. Four groups were created based on bone type (iliac or pubic region) and presence or absence of cortical bone. Specimens were micro-computed tomography imaged to evaluate trabecular thickness, trabecular number, trabecular separation, bone volume density (BV/TV), BMD, and cortical thickness. Miniscrews 1.4 mm in diameter and 6 mm long were inserted into the bone blocks, and primary stability was evaluated by insertion torque (IT), mini-implant mobility (PTV), and pull-out strength (PS). RESULTS: Intergroup comparison showed lower levels of primary stability when the BMD of trabecular bone was lower and in the absence of cortical bone (P≤.05). The Pearson correlation test showed correlation between trabecular number, trabecular thickness, BV/TV, trabecular BMD, total BMD, and IT, PTV, and PS. There was correlation between cortical thickness and IT and PS (P≤.05). CONCLUSION: Cancellous bone plays an important role in primary stability of mini-implants in the presence or absence of cortical bone.

Short-term in vivo evaluation of zinc-containing calcium phosphate using a normalized procedure.

The effect of zinc-substituted calcium phosphate (CaP) on bone osteogenesis was evaluated using an in vivo normalized ISO 10993-6 protocol. Zinc-containing hydroxyapatite (ZnHA) powder with 0.3% by wt zinc (experimental group) and stoichiometric hydroxyapatite (control group) were shaped into cylindrical implants (2×6 mm) and were sintered at 1000 °C. Thermal treatment transformed the ZnHA cylinder into a biphasic implant that was composed of Zn-substituted HA and Zn-substituted ß-tricalcium phosphate (ZnHA/ßZnTCP); the hydroxyapatite cylinder was a highly crystalline and poorly soluble HA implant. In vivo tests were performed in New Zealand White rabbits by implanting two cylinders of ZnHA/ßZnTCP in the left tibia and two cylinders of HA in the right tibia for 7, 14 and 28 days. Incorporation of 0.3% by wt zinc into CaP increased the rate of Zn release to the biological medium. Microfluorescence analyses (µXRF-SR) using synchrotron radiation suggested that some of the Zn released from the biomaterial was incorporated into new bone near the implanted region. In contrast with previous studies, histomorphometric analysis did not show significant differences between the newly formed bone around ZnHA/ßZnTCP and HA due to the dissolution profile of Zn-doped CaP. Despite the great potential of Zn-containing CaP matrices for future use in bone regeneration, additional in vivo studies must be conducted to explain the mobility of zinc at the CaP surface and its interactions with a biological medium.

Bone metabolism in obese rats programmed by early weaning.

OBJECTIVE: Obesity and osteoporosis seem to have a common pathogenesis, especially because bone and adipose tissue have common origins. Since early weaning (EW) decreases adipogenesis and osteogenesis in neonate, further programming for obesity and hyperleptinemia, we hypothesized that these changes in adipogenesis could affect bone metabolism. MATERIALS/METHODS: Lactating rats were separated into 3 groups: control - dams whose pups ate milk throughout lactation; mechanical EW (MEW) - dams were involved with a bandage interrupting suckling in the last 3days of lactation; pharmacological EW (PEW) - dams were bromocriptine-treated (0.5mg/twice a day via intraperitoneal injection) 3days before weaning. The adult offspring was subjected to dual-energy X-ray absorptiometry and bone tissue was also evaluated by computed tomography, microcomputed tomography and biomechanical tests, beyond serum analyses. RESULTS: MEW and PEW presented higher total bone mineral density (BMD), total bone mineral content, spine BMD and bone area in postnatal day 150 (PN150). In PN180, both groups also presented increase of these parameters and higher femur BMD and fourth lumbar vertebra (LV4) BMD, femoral head radiodensity and LV4 vertebral body radiodensity, trabecular number, stiffness and break load; lower trabecular separation, maximal deformation and break deformation, and also hyperleptinemia and higher visceral fat mass and 25-hydroxivitamin D, whereas parathyroid hormone was unchanged. Serum C-terminal cross-linked telopeptide of type I collagen was lower for both groups. CONCLUSIONS: Since both models program for obesity and increased bone mass, and leptin increases plasma vitamin D levels, probably leptin is the link between obesity and higher bone mass.