Integrated metabolome and transcriptome analyses reveal the molecular mechanism underlying dynamic metabolic processes during taproot development of Panax notoginseng.

BACKGROUND: Panax notoginseng (Burk) F. H. Chen is one of the most famous Chinese traditional medicinal plants. The taproot is the main organ producing triterpenoid saponins, and its development is directly linked to the quality and yield of the harvested P. notoginseng. However, the mechanisms underlying the dynamic metabolic changes occurring during taproot development of P. notoginseng are unknown. RESULTS: We carried out metabolomic and transcriptomic analyses to investigate metabolites and gene expression during the development of P. notoginseng taproots. The differentially accumulated metabolites included amino acids and derivatives, nucleotides and derivatives, and lipids in 1-year-old taproots, flavonoids and terpenoids in 2- and 3-year-old taproots, and phenolic acids in 3-year-old taproots. The differentially expressed genes (DEGs) are related to phenylpropanoid biosynthesis, metabolic pathway and biosynthesis of secondary metabolites at all three developmental stages. Integrative analysis revealed that the phenylpropanoid biosynthesis pathway was involved in not only the development of but also metabolic changes in P. notoginseng taproots. Moreover, significant accumulation of triterpenoid saponins in 2- and 3-year-old taproots was highly correlated with the up-regulated expression of cytochrome P450s and uridine diphosphate-dependent glycosyltransferases genes. Additionally, a gene encoding RNase-like major storage protein was identified to play a dual role in the development of P. notoginseng taproots and their triterpenoid saponins synthesis. CONCLUSIONS: These results elucidate the molecular mechanism underlying the accumulation of and change relationship between primary and secondary metabolites in P. notoginseng taproots, and provide a basis for the quality control and genetic improvement of P. notoginseng.

Large detection range and high strain sensitivity fiber SPR sensor based on wave structure.

To achieve a fiber strain sensor with a large detection range and high sensitivity, this paper proposes a wave structured fiber SPR strain sensor. When subjected to axial strain, the wave structured fiber is stretched axially, increasing the stretchability of the sensor and achieving a large detection range strain sensing. Meanwhile, axial strain reduces the longitudinal amplitude of the fiber wave structure, effectively changing the total reflection angle of the transmitted beam at the peak and valley (SPR incidence angle) to achieve high sensitivity SPR strain sensing. The experiment indicates that the strain detection range of the sensor can reach 0-1800µÎµ, with a maximum strain sensitivity of 36.25pm/µÎµ. The wave structured fiber SPR strain sensor designed in this article provides a new approach to improve the range and sensitivity of strain detection.

Spiral cone fiber SPR sensor for detecting ginsenoside Rg1.

The conical fiber SPR sensor is easy to manufacture and has been used in biochemical detection research, but it has the problem of structural fragility. This article proposes a spiral cone fiber SPR sensor, which introduces a spiral structure on the 76µm fiber coarse cone, achieving good coupling of the core mode into the cladding mode, and improving the physical strength and practicality of the cone-shaped fiber SPR sensor. By modifying the target protein on the surface of the sensor gold film, specific detection of ginsenoside Rg1, an active ingredient of traditional Chinese medicine ginseng, was achieved. The detection sensitivity was 0.138 nm/(µm/ml) and the detection limit was 0.22µm/ml. The proposed spiral cone fiber SPR sensor provides a new scheme for the specific detection of active ingredients in traditional Chinese medicine, which is structurally stable and physically strong.

Design of a dual Ir-Eu tag for fluorescent visualization and ICP-MS quantification of SIRPα and its host cells.

With the expansion of ICP-MS application into the field of bioanalysis, there is an urgent need for novel element tags today. Here, we report the design of a dual-element Ir-Eu tag, opening the door to simultaneous fluorescent imaging and ICP-MS quantification. The ratio of 153Eu/193Ir may serve as a precision control of the labeling process, allowing internal validation of the quantitative results obtained. As for SIRPα and its host cell analysis exemplified here, the Ir-Eu tag demonstrated superior figures of ICP-MS quantification with the LOD (3σ) down to 0.5 (153Eu) and 1.1 (193Ir) pM SIRPα and 220 (153Eu) and 830 (193Ir) RAW264.7 cells more than 130 times more sensitive compared with the LOD (3σ) of 65.2 pM SIRPα at 612 nm using fluorometry. Not limited to these demonstrations, we believe that the design ideas of the dual Ir-Eu tags should be applicable to various cases of bioanalysis when dual optical profiling and ICP-MS quantification are indispensable.

Myclobutanil induces cardiotoxicity in developing zebrafish larvae by initiating oxidative stress and apoptosis: The protective role of curcumin.

Myclobutanil (MYC) is a common triazole fungicide widely applied in agriculture. MYC extensively exists in the natural environment and can be detected in organisms. However, little is known about MYC-induced embryonic developmental damage. This study aimed to unravel the cardiotoxicity of MYC and the underlying mechanisms, as well as the cardioprotective effect of curcumin (CUR, an antioxidant polyphenol) using the zebrafish model. Here, zebrafish embryos were exposed to MYC at concentrations of 0, 0.5, 1 and 2 mg/L from 4 to 96 h post fertilization (hpf) and cardiac development was assessed. As results, MYC reduced the survival and hatching rate, body length and heart rate, but increased the malformation rate and spontaneous movement. MYC caused abnormal cardiac morphology and function in myl7:egfp transgenic zebrafish, and downregulated cardiac developmental genes. MYC promoted oxidative stress through excessive reactive oxygen species (ROS) accumulation and suppressed the activities of antioxidant enzymes, triggering cardiomyocytic apoptosis via upregulated expression of apoptosis-related genes. These adverse toxicities could be significantly ameliorated by the antioxidant properties of CUR, indicating that CUR rescued MYC-induced cardiotoxicity by inhibiting oxidative stress and apoptosis. Overall, our study revealed the potential mechanisms of oxidative stress and apoptosis in MYC-induced cardiotoxicity in zebrafish and identified the cardioprotection of CUR in this pathological process.

Protein Recognition Based on Temperature-Stimulated Multiparameter Response Virtual Array Sensing Strategy.

In the field of array sensing, researchers are committed to miniaturizing array sensing systems while ensuring the acquisition of multiple sensing information. Here, a new strategy called "stimulus responsive array sensing" was presented to obtain virtual multiple sensing without constructing multiple physical sensing units. Based on bioluminescence resonance energy transfer, where luciferase acts as the donor and temperature stimulus response polymers act as the receptors, by using only one sensing unit to output multiple stimulus responsive sensing signals in temperature dimension, an equivalent array sensing could be achieved. This strategy can distinguish and quantify a variety of proteins. More importantly, glucose responsive monomers were doped in polymers; thus, more virtual sensing units can be further increased to obtain more sensing signals, greatly increasing the accuracy of protein recognition, and it can also be used to differentiate several compositions of protein under different glucose concentrations in urine caused by different renal diseases. The results show the potential of the "stimulus responsive array sensing" for analyzing molecular compositions in complex biological systems and show a new tack in array sensing.

Hypomethylation of DYRK4 in peripheral blood is associated with increased lung cancer risk.

Lung cancer (LC) is the leading cause of cancer-related deaths worldwide. It is urgent to identify new biomarkers for the early detection of LC. DNA methylation in peripheral blood has been reported to be associated with cancers. We conducted two independent case-control studies and a nested case-control study (168 LC cases and 167 controls in study Ⅰ, 677 LC cases and 833 controls in study Ⅱ, 147 precancers and 21 controls in the nested case-control study). The methylation levels of DYRK4 CpG sites were measured using mass spectrometry and their correlations with LC were analyzed by logistic regression and nonparametric tests. Bonferroni correction was used for the multiple comparisons. LC-related decreased DYRK4 methylation was discovered in Study I and validated in Study II (the odds ratios [ORs] for the lowest vs. highest quartile of all three DYRK4 CpG sites ranged from 1.64 to 2.09, all p < 0.001). Combining the two studies, hypomethylation of DYRK4 was observed in stage I cases (ORs per -10% methylation ranged from 1.16 to 1.38, all p < 5.9E-04), and could be enhanced by male gender (ORs ranged from 1.77 to 4.17 via interquartile analyses, all p < 0.017). Hypomethylation of DYRK4_A_CpG_2 was significantly correlated with tumor size, length, and stage (p = 0.034, 0.002, and 0.002, respectively) in LC cases. Our study disclosed the association between DYRK4 hypomethylation in peripheral blood and LC, suggesting the feasibility of blood-based DNA methylation as new biomarker for LC detection.

Clinical impact of hepatic steatosis on chronic hepatitis B patients in Asia: A systematic review and meta-analysis.

Chronic hepatitis B (CHB) and hepatic steatosis (HS) are two prevalent chronic liver diseases in Asia. The incidence of CHB combined with HS is increasing due to the rising obesity rates. However, the impact of HS on CHB remains a topic of debate. Hereby, this meta-analysis aims to examine the effect of HS on Asian patients with CHB. Searches were conducted on four databases to identify articles published from 2005 to 2023. The random-effects or fixed-effects model was used to calculate pooled odds ratios (ORs), weighted mean difference (WMD), and confidence intervals (CIs) for the included articles. Of the 15,959 records screened, 88 studies were included in the analysis of HS prevalence in Asian CHB patients with a prevalence of 36.5% (95% CI: 33.7%-39.3%). In addition, age, sex, body mass index (BMI), waist circumference (WC), alanine aminotransferase (ALT) and combined metabolic diseases have varying degrees of impact on HS in CHB patients. Furthermore, the coexistence of HS was negatively associated with the response to antiviral therapy, including hepatitis B surface antigen (HBeAg) seroconversion (OR = 0.69, 95% CI: 0.53-0.89) and ALT normalization (OR = 0.75, 95% CI: 0.61-0.92) in CHB patients after 48 weeks of treatment. Regarding disease prognosis, HS was not significantly associated with fibrosis or cirrhosis in CHB patients, while an inverse association was observed between HS and hepatocellular carcinoma (HCC) (OR = 2.93, 95% CI: 1.23-6.99). This implies that the coexistence of HS in CHB patients may exacerbate the progression of HCC, which needs to be verified by further studies.

Three-dimensional micro displacement sensor based on fiber SPR mechanisms.

Three fiber micro displacement sensors can be combined to realize three-dimensional (3D) displacement sensing, but the system is complex. In this paper, a 3D displacement sensor based on fiber SPR was proposed, which was composed of displacement fiber and sensing fiber. By cascading the eccentric dual-core fiber and graded multimode fiber, the displacement fiber was realized. The V-groove was processed in the vertical and horizontal directions of the graded multimode fiber, and the inclined SPR sensing areas were fabricated to realize the sensing fiber. A straight beam from the middle core of the displacement fiber contacted the vertical V-groove inclined plane of the sensing fiber to realize the Y axis (up and down) direction micro displacement, contacted the horizontal V-groove inclined plane of the sensing fiber to realize the Z axis (front and back) direction micro displacement sensing. An oblique beam from the eccentric core of the displacement fiber cooperated with the sensing fiber to realize the micro displacement sensing in the X-axis (left and right) direction. The testing results indicate that the fiber SPR 3D micro displacement sensor can sense micro displacement in the X axis, Y axis and Z axis, and the wavelength sensitivity is 0.148 nm/µm, -3.724 nm/µm and 3.543 nm/µm, respectively. The light intensity sensitivity is -0.0014a.u./µm, -0.0458a.u./µm and -0.0494a.u./µm, respectively. When adjusting the parameters of eccentric dual-core fiber, the larger the core distance is, the greater the displacement sensitivity in the X-axis direction of the sensor is, and the smaller the detection range is. The proposed sensor can realize 3D micro displacement sensing by itself, which is expected to be used in the field of 3D micro displacement measurement and 3D space precision positioning.

Multi working mode SPR chip laboratory for high refractive index detection.

The Fiber SPR chip laboratory has become a popular choice in biochemical detection. To meet the needs of different kinds of analytes for the detection range and number of channels of the chip, we proposed a multi-mode SPR chip laboratory based on microstructure fiber in this paper. The chip laboratory was integrated with microfluidic devices made from PDMS and detection units made of bias three-core fiber and dumbbell fiber. By injecting light into different cores of a bias three-core fiber, different detection areas of dumbbell fiber can be selected, enabling the chip laboratory to enter high refractive index detection, multi-channel detection and other working modes. In the high refractive index detection mode, the chip can detect liquid samples with a refractive index range of 1.571-1.595. In multi-channel detection mode, the chip can achieve dual parameter detection of glucose and GHK-Cu, with sensitivities of 4.16 nm/(mg/mL) and 9.729 nm/(mg/mL), respectively. Additionally, the chip can switch to temperature compensation mode. The proposed multi working mode SPR chip laboratory, based on micro structured fiber, offers a new approach for the development of portable testing equipment that can detect multiple analytes and meet multiple requirements.

High-sensitivity fiber SPR strain sensor based on n-type structure.

At present, fiber strain sensors are mainly of the grating type and interference type, while there is relatively little research on fiber surface plasmon resonance (SPR) strain sensors. In this Letter, we propose a highly sensitive fiber SPR strain sensor based on an n-type structure. The strain changes the shape of the fiber n-type structure, causing the transmission mode of light in the fiber to change, thereby changing the SPR incidence angle and causing the SPR resonance valley wavelength to shift, achieving highly sensitive SPR strain sensing. The test results indicate that the strain sensing sensitivity of the proposed sensor reaches 21.33 pm/µÎµ, and two n-type structures are connected in series to obtain a double n-type structure, further enhancing the strain sensing sensitivity to 33.44 pm/µÎµ. This fiber strain sensor has advantages of high sensitivity, low temperature cross talk, strong structural stability, and low production cost, and is expected to become a new solution for wearable intelligent monitoring equipment and strain sensors in the aerospace field.

Highly sensitive SPR curvature sensor based on graded-index fiber.

At present, fiber curvature sensors based on surface plasmon resonance (SPR) are mostly of the multimode fiber core type or cladding type. These types have many SPR modes, resulting that the sensitivity cannot be adjusted and is difficult to improve. In this Letter, a highly sensitive SPR curvature sensor based on graded-index fiber is proposed. The light-injecting fiber is eccentrically connected with the graded-index fiber to inject single-mode light. Due to the self-focusing effect, the light beam propagates in the graded-index multimode fiber with a cosine trajectory, and the cosine beam contacts the flat grooved sensing region fabricated on the graded-index fiber to generate SPR. Due to the single transmission mode of the proposed fiber SPR sensor, the curvature sensing sensitivity is greatly improved. By changing the light injection position of the graded-index multimode fiber, the sensitivity can be adjusted. The proposed curvature sensing probe has a high sensitivity and can identify the bending direction. When bending in the X direction, the sensitivity reaches 5.62 nm/m-1, and when bending in the - X direction, the sensitivity reaches 4.75 nm/m-1, which provides a new scheme for highly sensitive and directionally identifiable curvature measurement.

Nano-TiO2 aggravates bioaccumulation and developmental neurotoxicity of difenoconazole in zebrafish larvae via oxidative stress and apoptosis: Protective role of vitamin C.

Titanium dioxide nanoparticles (n-TiO2) could enhance the bioavailability and toxicity of coexisting organic contaminants in the aquatic environment. This study attempted to investigate the combined effects of n-TiO2 and difenoconazole (DIF) on the neurodevelopment of zebrafish and the underlying mechanisms. In this study, zebrafish embryos were exposed to n-TiO2 (100 µg/L), DIF (0, 0.1 and 0.5 mg/L) and their mixtures from 4 to 96 h post fertilization (hpf) and neurotoxicity was evaluated. Our results indicated that n-TiO2 adsorbed DIF into the brain of zebrafish and significantly enhanced the bioaccumulation of DIF and n-TiO2 in the 0.5 mg/L co-exposure group. 100 µg/L n-TiO2 was not developmentally toxic to the zebrafish larvae, but it exacerbated DIF-induced neurobehavioral alterations in the zebrafish larvae. n-TiO2 also aggravated DIF-induced suppression of central nervous system (CNS) neurogenesis in Tg (HuC:egfp) zebrafish, motor neuron axon length in Tg (hb9:egfp) zebrafish, and downregulation of neurodevelopmental genes (elavl3, ngn1, gap43, gfap and mbp). In addition, DIF elevated oxidative stress by accumulation of reactive oxygen species (ROS) and inhibition of antioxidant enzymes, and triggered apoptosis by upregulation of p53, bax, bcl-2 and caspase-3, which were markedly intensified in the presence of n-TiO2. Moreover, vitamin C (VC) ameliorated n-TiO2/DIF-induced abnormal locomotor behaviors and neurotoxicity by inhibiting oxidative stress and apoptosis, indicating that oxidative stress and apoptosis are involved in n-TiO2/DIF-induced neurotoxicity. Taken together, our data indicated that n-TiO2 enhanced the accumulation of DIF and heightened oxidative stress and apoptosis, thereby inducing neurotoxicity. This study exemplifies the importance of the toxicity assessment of chemical mixtures and novel insights to mitigate their combined toxicity.

Curcumin protects against fenvalerate-induced neurotoxicity in zebrafish (Danio rerio) larvae through inhibition of oxidative stress.

Fenvalerate (FEN), a typical type II pyrethroid pesticide, is widely used in agriculture. FEN has been detected in the environment and human body. However, the neurotoxicity of FEN has not been well elucidated. This study aimed to explore the mechanisms underlying FEN-induced neurotoxicity using the zebrafish (Danio rerio) model. We also investigated whether curcumin (CUR), a polyphenol antioxidant that exhibits neuroprotective properties, can prevent FEN-induced neurotoxicity. Here, zebrafish embryos were exposed to 0, 3.5, 7 and 14 µg/L of FEN from 4 to 96 h post fertilization (hpf) and neurotoxicity was assessed. Our results showed that FEN decreased the survival rate, heart rate, body length and spontaneous movement, and increased malformation rate. FEN caused neurobehavioral alterations, including decreased swimming distance and velocity, movement time and clockwise rotation times. FEN also suppressed neurogenesis in transgenic HuC:egfp zebrafish, reduced cholinesterase activity and downregulated the expression of neurodevelopment related genes (elavl3, gfap, gap43 and mbp). In addition, FEN enhanced oxidative stress via excessive reactive oxygen species and antioxidant enzyme inhibition, then triggered apoptosis by upregulation of apoptotic genes (p53, bcl-2, bax and caspase 3). These adverse outcomes were alleviated by CUR, indicating that CUR mitigated FEN-induced neurotoxicity by inhibiting oxidative stress. Overall, this study revealed that CUR ameliorated FEN-induced neurotoxicity via its antioxidant, indicating a promising protection of CUR against environmental pollutant-induced developmental anomalies.

Characteristics of heavy metal accumulation and risk assessment in understory Panax notoginseng planting system.

Yunnan Province is the main planting area of the precious Chinese herbal medicines (CHM) Panax notoginseng; however, it locates the geological area with high soil heavy metals in China. The frequent land replacement due to continuous cropping obstacles and excessive application of chemicals makes P. notoginseng prone to be contaminated by heavy metals under the farmland P. notoginseng (FPn) planting. To overcome farmland shortage, understory P. notoginseng (UPn) was developed as a new ecological planting model featured by no chemicals input. However, this newly developed planting system requires urgently the soil-plant heavy metal characteristics and risk assessment. This study aimed to evaluate the pollution status of eight heavy metals in the tillage layer (0-20 cm), subsoil layer (20-40 cm) and the plants of UPn in Lancang County, Yunnan Province. Pollution index (Pi) showed that the contamination degree of heavy metals in the tillage layer and subsoil layer was Cd > Pb > Ni > Cu > Zn > Cr > Hg > As and Pb > Cd > Cu > Ni > Cr > Hg > Zn > As, respectively. Potential ecological risk index (PERI) for the tillage layer and subsoil layer was slight and middle, respectively. The exceeding standard rate of Cd, As, Pb, Hg, Cu in the UPn roots was 5.33%, 5.33%, 13.33%, 26.67% and 1.33%, respectively, while only Cd and Hg in the UPn leaves exceeded the standard 10% and 14%, respectively. The enrichment abilities of Cd and Hg in the roots and leaves of UPn were the strongest, while that of Pb was the weakest. The Hazard index (HI) and target hazard quotient (THQ) of eight heavy metals in the roots and leaves of UPn were less than 1.Therefore, our results prove that Upn has no human health risk and provide a scientific basis for the safety evaluation and extension of UPn.

High sensitivity fiber cladding SPR strain sensor based on V-groove structure.

How to couple the light in the fiber core to the cladding is an urgent issue that need to be done for the fabrication of the fiber-cladding SPR sensor, and there is no report about the fiber SPR strain sensor. Hereby, we propose and demonstrate a high sensitivity fiber cladding SPR strain sensor based on V-groove structure. By CO2 laser, the V-groove is fabricated on the single-mode fiber, and the light in the fiber core is effectively coupled to the cladding. The cladding 2cm behind the V-groove is coated with sensing gold film, and a multimode fiber is spliced with the sensing probe to construct the novel fiber cladding SPR sensor. On the basis of the investigation of the effects of different V-groove depth, number and period on the performance of fiber SPR refractive index sensor, a high sensitivity strain SPR sensor is designed and fabricated by employing the characteristic that the V-groove will deform with strain. The testing results indicate that the average refractive index sensitivity of the sensor is 2896.4nm/RIU, and the strain wavelength sensitivity is 25.92pm/µÎµ which is much higher than that of the fiber interference and grating strain sensors, and the strain light intensity sensitivity is -4.4×10-4 a.u./µÎµ. The proposed fiber cladding SPR strain sensor has the advantages of simple structure and convenient manufacture, and can be used for working in a narrow space.

Fiber SPR two-dimensional micro displacement sensor based on the coaxial double waveguide with a conical structure.

Fiber SPR micro displacement sensor cannot be used for two-dimensional displacement sensing at present. In this paper, we proposed and demonstrated a fiber SPR two-dimensional micro displacement sensor based on the coaxial double waveguide with a conical structure. The coaxial double waveguide is fused into a cone as the light injection fiber, and two different forms of outgoing light fields can be obtained through two cores of the fiber. The horn shaped light field emitted by the ring core of the coaxial double waveguide can cooperate with the sensing fiber to realize the micro displacement sensing in the x-axis direction. And the straight beam emitted by the middle core of the coaxial double waveguide can cooperate with the sensing fiber to realize the micro displacement sensing in the y-axis direction. Through simulation analysis and experimental test, its average wavelength sensitivity and light intensity sensitivity of the x-axis displacement are 0.0537nm/µm and 0.000124a.u./µm, respectively. And that of the y-axis displacement are 0.315nm/µm and 0.00277a.u./µm, respectively. The proposed fiber sensor realizes the two-dimensional displacement sensing based on SPR, which can be widely used in the fields of two-dimensional micro displacement measurement and two-dimensional position precision positioning.

Multi-channel curvature sensor based on fiber bending loss wavelength and SPR.

Fiber Bragg gratings and interferometric curvature sensors are easily disturbed by axial strain and temperature, and cascaded multi-channel curvature sensing is difficult. In this letter, a curvature sensor based on fiber bending loss wavelength and the surface plasmon resonance (SPR) mechanism is proposed, which is insensitive to axial strain and temperature. In addition, fiber bending loss valley wavelength demodulation curvature improves the accuracy of bending loss intensity sensing. Experiments show that the bending loss valley of single-mode fiber with different cut-off wavelengths has different working bands which is combined with a plastic-clad multi-mode fiber SPR curvature sensor to realize a wavelength division multiplexing multi-channel curvature sensor. The bending loss valley wavelength sensitivity of single-mode fiber is 0.8474 nm/m-1, and the intensity sensitivity is 0.0036 a.u./m-1. The resonance valley wavelength sensitivity of the multi-mode fiber SPR curvature sensor is 0.3348 nm/m-1, and the intensity sensitivity is 0.0026 a.u./m-1. The proposed sensor is insensitive to temperature and strain, and the working band is controllable, which provides a new, to the best of our knowledge, solution for wavelength division multiplexing multi-channel fiber curvature sensing.

Monitoring of the yogurt fermentation process based on a rapid bio-luminescent chiral pattern recognition of amino acids.

The analysis of chiral α-amino acids is of great significance in asymmetric synthesis, nutrition, food science, and microbiology. However, the ability of chiral recognition is difficult to achieve. Due to the demand for expensive equipment and skilled operators, traditional methods such as high-performance liquid chromatography are limited. The previously reported methods based on chemical sensor arrays usually cannot carry out the chiral analysis. Here, we developed a novel biosensor array based on the interaction between a suite of host-based luminescent bacteria and amino acids and used linear discriminant analysis to reflect their luminescence response patterns. This biosensor array could effectively discriminate chiral amino acids, including 19 L-amino acids, their corresponding D-enantiomers, and the achiral glycine. In addition, the determination of enantiomeric purity and quantitative ability has been proved. The successful identification of a complex system containing multiple chiral amino acids further demonstrates the superiority of the bioluminescent sensor array. Moreover, this sensor array could efficiently monitor the dynamic composition of free amino acids in the process of milk fermentation. Finally, the bioluminescence response mechanism of the luminescent bacteria for the recognition of chirality was clarified. This approach possessed the advantages of facile construction, high throughput, easy operation, high accuracy and fast response.

S-type fiber surface plasmon resonance strain sensor.

The fiber surface plasmon resonance (SPR) sensor is widely used in high-sensitivity refractive index detection, and there are few reports on SPR sensors used for strain measurement. In this paper, we propose and demonstrate an S-type fiber strain sensor based on SPR. The simulation and testing results indicate that the smaller the vertical axis offset of S-type fiber is, the larger the incidence angle of SPR is, and the closer the working band of SPR is to the shorter wavelength direction. By electrofusion, we fabricated an S-type structure on the single-mode fiber, and by the S-type structure, the high-order cladding mode was excited. A 50 nm gold film was coated on the surface of the fiber cladding behind the S-type structure. The evanescent field of the cladding mode contacted the gold film to produce SPR, and the strain can change the vertical axis offset of the S-type fiber and further change the incidence angle of SPR; hence an S-type fiber strain sensor based on SPR was realized. When the refractive index of the ambient medium is 1.345 RIU, the vertical axis offset and length of the S-shaped structure are 87 and 501 µm, respectively, the resonance wavelength of the fiber SPR strain sensor changes from 648.06 to 631.77 nm with a strain detection range of 0-1200µÎµ, and its sensitivity is -14.38pm/µÎµ. The proposed sensor provides a new solution for the strain measurement of the fiber SPR sensor, which is expected to be used in the fields of engineering, health monitoring, and early warning.