From Quaternary Carbon to Tertiary C(sp3)-Si and C(sp3)-Ge Bonds: Decyanative Coupling of Malononitriles with Chlorosilanes and Chlorogermanes Enabled by Ni/Ti Dual Catalysis.

Transition-metal-catalyzed C-Si/Ge cross-coupling offers promising avenues for the synthesis of organosilanes/organogermanes, yet it is fraught with long-standing challenges. A Ni/Ti-catalyzed strategy is reported here, allowing the use of disubstituted malononitriles as tertiary C(sp3) coupling partners to couple with chlorosilanes and chlorogermanes, respectively. This method enables the catalytic cleavage of the C(sp3)-CN bond of the quaternary carbon followed by the formation of C(sp3)-Si/C(sp3)-Ge bonds from ubiquitously available starting materials. The efficiency and generality are showcased by a broad scope for both of the coupling partners, therefore holding the potential to synthesize structurally diverse quaternary organosilanes and organogermanes that were difficult to access previously.

Coherent perfect absorption from asymmetry transmissive Helmholtz resonator metamaterials.

We propose an asymmetry transmissive (AT) Helmholtz resonator metamaterial to interact with dual incidences of different polarizations from opposite directions to achieve coherent perfect absorption at a terahertz regime. More specifically, the proposed design will solely allow the x-polarized incidence tunnel into the Helmholtz resonator cavity array with roughly half the energy reflected. Meanwhile, the transmitted fields will be converted into the y-polarized counterparts so as to go out through the metamaterial and finally coherent canceled with the partially reflected fields of the other incidence. Our design, introducing the Helmholtz resonator array in the electromagnetics with an extension of the principle of polarization conversion under the coherent perfect absorption, should pave the way for the quest of building up more advanced wave trapping meta-devices for various applications in different disciplines.

A Type of Stable Amides Behaves as Acyl Transfer Reagents upon Visible-Light Irradiation through Self-Aromatization.

Organic molecules with light-modifiable reactivity are important in many fields because they can serve as the "switch" for light to trigger chemical processes. Herein, we disclose a new type of stable non-twisted amides, the reactivity of which can be turned on by light as acyl transfer reagents. Upon photo-activation, these amides react with various nucleophiles including amines, phenols, hydroxide, thiols, boronic acids, and alkynes either under metal-free or metal-catalysis conditions. This reactivity hinges on the design and synthesis of a photo-activatable reagent (7-nitro-5,6-dihydrophenanthridine), which undergoes self-aromatization enabled by an internal oxidant under light. This masked acyl donor group is anticipated to be useful in scenarios where light is preferred to trigger a chemical process.

Rapid electrodeposition of Cu nanoparticle film on Ni foam as an integrated 3D free-standing electrode for non-invasive and non-enzymatic creatinine sensing.

High cost, inherent destabilization, and intricate fixing of enzyme molecules are the main drawbacks of enzyme-based creatinine sensors. The design of a low-cost, stabilizable, and enzyme-free creatinine sensing probe is essential to address these limitations. In this work, an integrated three-dimensional (3D) free-standing electrode was designed to serve as a non-enzymatic creatinine sensing platform and was fabricated by rapid electrodeposition of a dense copper nanoparticle film on nickel foam (Cu NP film/NF). This low-cost, stable, easy-to-fabricate, and binder-free Cu NP film/NF electrode has abundant active sites and excellent electrochemical performance. Cyclic voltammetry measurements show a wide linear range (0.25-24 mM), low detection limit (0.17 mM), and high sensitivity (306 µA mM-1 cm-2). The developed sensor shows high recovery of creatinine concentration in real urine. Besides, it has better specificity, reproducibility, and robustness in detecting creatinine. These excellent results suggest that a non-enzymatic creatinine sensor based on an integrated 3D free-standing Cu NP film/NF electrode has good potential for non-invasive detection of urinary creatinine.

Construction and characterization of a full-length infectious clone of an emerging senecavirus A strain.

Senecavirus A (SVA) is an emerging virus that causes vesicular disease in pigs. Construction of a full-length SVA cDNA clone is crucial for understanding its replication and pathogenesis. Here, we successfully constructed a CMV-promoter-driven infectious cDNA clone of the SVA isolate SVA/GX/CH/2018, which we named rSVA GX01. Sequence comparison between the pSVA GX01 and the parental isolate (SVA/GX/CH/2018) revealed three single-nucleotide differences. Four-week-old piglets were experimentally infected with either the parental virus or the cloned virus. The results showed that the cloned rSVA GX01 displayed weak pathogenicity in 4-week-old pigs compared to the parental virus SVA CH-GX-01-2018. The infectious clone of SVA will serve as a valuable tool for studying the viral replication cycle and for functional analysis of the viral genome.

External electric field driven conformation transition between lithium salts and electride-like molecules: intriguing NLO switches in Li@corannulene.

The external electric field has emerged as a powerful tool for building molecular switches with excellent properties. In this work, we investigate the impact of an external electric field on the transition between lithium salt and electride-like molecule conformations in Li@corannulene. Remarkably, the distance between the Li atom and the corannulene bottom displays a sharp increase under the influence of an external electric field strength of F-z = 110 × 10-4 a.u. As the external electric field strength increases, the Li atom brings about different directions of charge transfer (CT). The natural population analysis (NPA) charge and the molecular electrostatic potential (ESP) results show that the intermolecular CT occurs from the Li atom to the corannulene with the F-z ranging from 0 to 100 × 10-4 a.u. Interestingly, when the external electric field reaches F-z = 110 × 10-4 a.u., the CT is oriented from the corannulene to the Li atom. Moreover, electron localization function (ELF) basins are presented under an F-z of 110 × 10-4 a.u., which indicates that Li@corannulene exhibits electride-like (e-⋯[Li@corannulene]+) molecules and lithiation salt (Li+[corannulene]-) under an F-z of 0 to 100 × 10-4 a.u. Significantly, the differences in charge transfer also contribute to a significant improvement in hyperpolarizabilities (ßtot) during the conformation transition from lithiation salt (Li+[corannulene]-) to electride-like (e-⋯[Li@corannulene]+) molecules. This study explores the potential of Li@corannulene as a promising second-order NLO material, and the external electric field provides an efficient strategy for designing and developing NLO switching devices.

Comparative Mitogenomics Analysis Revealed Evolutionary Divergence among Neopestalotiopsis Species Complex (Fungi: Xylariales).

The genus Neopestalotiopsis consists of obligate parasites that cause ring spot, scab, and leaf blight diseases in higher plant species. We assembled the three complete mitogenomes for the guava fruit ring spot pathogen, Neopestalotiopsis cubana. The mitogenomes are circular, with sizes of 38,666 bp, 33,846 bp, and 32,593 bp. The comparative analyses with Pestalotiopsis fici showed that N. cubana differs greatly from it in the length of the mitogenomes and the number of introns. Moreover, they showed significant differences in the gene content and tRNAs. The two genera showed little difference in gene skewness and codon preference for core protein-coding genes (PCGs). We compared gene sequencing in the mitogenomes of the order Xylariales and found large-scale gene rearrangement events, such as gene translocations and the duplication of tRNAs. N. cubana shows a unique evolutionary position in the phylum Ascomycota constructed in phylogenetic analyses. We also found a more concentrated distribution of evolutionary pressures on the PCGs of Neopestalotiopsis in the phylum Ascomycota and that they are under little selective pressure compared to other species and are subjected to purifying selection. This study explores the evolutionary dynamics of the mitogenomes of Neopestalotiopsis and provides important support for genetic and taxonomic studies.

Molecular transformation of dissolved organic matter in manganese ore-mediated constructed wetlands for fresh leachate treatment.

The organic matter (OM) and nitrogen in Fresh leachate (FL) from waste compression sites pose environmental and health risks. Even though the constructed wetland (CW) can efficiently remove these pollutants, the molecular-level transformations of dissolved OM (DOM) in FL remain uncertain. This study reports the molecular dynamics of DOM and nitrogen removal during FL treatment in CWs. Two lab-scale vertical-flow CW systems were employed: one using only sand as substrates (act as a control, CW-C) and the other employing an equal mixture of manganese ore powder and sand (experimental, CW-M). Over 488 days of operation, CW-M exhibited significantly higher removal rates for chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), and dissolved organic matter (represented by dissolved organic carbon, DOC) at 98.2 ± 2.5%, 99.2 ± 1.4%, and 97.9 ± 1.9%, respectively, in contrast to CW-C (92.8 ± 6.8%, 77.1 ± 28.1%, and 74.7 ± 9.5%). The three-dimensional fluorescence excitation-emission matrix (3D-EEM) and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) analyses unveiled that the influent DOM was predominantly composed of readily biodegradable protein-like substances with high carbon content and low unsaturation. Throughout treatment, it led to the degradation of low O/C and high H/C compounds, resulting in the formation of DOM with higher unsaturation and aromaticity, resembling humic-like substances. CW-M showcased a distinct DOM composition, characterized by lower carbon content yet higher unsaturation and aromaticity than CW-C. The study also identified the presence of Gammaproteobacteria, reported as Mn-oxidizing bacteria with significantly higher abundance in the upper and middle layers of CW-M, facilitating manganese cycling and improving DOM removal. Key pathways contributing to DOM removal encompassed adsorption, catalytic oxidation by manganese oxides, and microbial degradation. This study offers novel insights into DOM transformation and removal from FL during CW treatment, which will facilitate better design and enhanced performance.

Ferroptosis and its role in gastric and colorectal cancers.

Ferroptosis is a novel mechanism of programmed cell death, characterized by intracellular iron overload, intensified lipid peroxidation, and abnormal accumulation of reactive oxygen species, which ultimately resulting in cell membrane impairment and demise. Research has revealed that cancer cells exhibit a greater demand for iron compared to normal cells, indicating a potential susceptibility of cancer cells to ferroptosis. Stomach and colorectal cancers are common gastrointestinal malignancies, and their elevated occurrence and mortality rates render them a global health concern. Despite significant advancements in medical treatments, certain unfavorable consequences and drug resistance persist. Consequently, directing attention towards the phenomenon of ferroptosis in gastric and colorectal cancers holds promise for enhancing therapeutic efficacy. This review aims to elucidate the intricate cellular metabolism associated with ferroptosis, encompassing lipid and amino acid metabolism, as well as iron metabolic processes. Furthermore, the significance of ferroptosis in the context of gastric and colorectal cancer is thoroughly examined and discussed.

Extremely Active and Robust Ir-Mn Dual-Atom Electrocatalyst for Oxygen Evolution Reaction by Oxygen-Oxygen Radical Coupling Mechanism.

A novel Ir-Mn dual-atom electrocatalyst is synthesized by a facile ion-exchange method by incorporating Ir in SrMnO3, which yields an extremely high activity and stability for the oxygen evolution reaction (OER). The ion exchange process occurs in a self-limitation way, which favors the formation of Ir-Mn dual-atom in the IrMnO9 unit. The incorporation of Ir modulates the electronic structure of both Ir and Mn, thereby resulting in a shorter distance of the Ir-Mn dual-atom (2.41 Å) than the Mn-Mn dual-atom (2.49 Å). The modulated Ir-Mn dual-atom enables the same spin direction O (↑) of the adsorbed *O intermediates, thus facilitating the direct coupling of the two adsorbed *O intermediates to release O2 via the oxygen-oxygen radical coupling mechanism. Electrochemical tests reveal that the Ir-SrMnO3 exhibits a superior OER's activity with a low overpotential of 207 mV at 10 mA cm-2 and achieves a mass specific activity of 1100 A gIr-1 at 1.5 V. The proton-exchange-membrane water electrolyzer with the Ir-SrMnO3 catalyst exhibits a low electrolysis voltage of 1.63 V at 1.0 A cm-2 and a stable 2000-h operation with a decay of only 15 µV h-1 at 0.5 A cm-2.

Sediment-seawater partitioning, bioaccumulation, and biomagnification of perfluorobutane sulfonamide in marine environment.

Environmental occurrence of perfluorobutane sulfonamide (PFBSA) has only been recently discovered. The current knowledge regarding the occurrence and environmental behaviors of PFBSA in the marine environment is still relatively limited. In this study, PFBSA and other 37 poly- and perfluoroalkyl substances were analyzed in seawater (n = 43), sediment (n = 43), and marine fish (n = 176) samples collected from East China Sea and Antarctic Ocean. PFBSA was detected in > 90% of seawater from East China Sea and Antarctic Ocean, with the concentrations of 1.0 - 19 ng/L and < LOD-228 pg/L, respectively. The field-based mean log-transformed sediment-seawater partitioning coefficients of PFBSA were 1.6 ± 0.19 L/kg dw and 1.1 ± 0.19 L/kg dw in East China Sea and Antarctic Ocean, respectively, which are lower than that of perfluorooctanoate and perfluorooctane sulfonate. This indicates its long-range transport potential in global oceans with ocean currents. The mean log-transformed bioaccumulation factor values of PFBSA determined in the multiple species of whole-body marine fishes from East China Sea and Antarctic Ocean were 2.3 L/kg ww and 2.4 L/kg ww, respectively, which are comparable to that of perfluoroheptanoate (2.3 L/kg ww) in marine fishes from East China Sea. We did not observe an obvious biomagnification or biodilution of PFBSA along the marine food chain in East China Sea or Antarctic Ocean. This study provides the first data on the environmental behaviors of PFBSA in the marine environment.

Phase-Field Simulation of Precipitation and Grain Boundary Segregation in Fe-Cr-Al Alloys under Irradiation.

A phase-field model for the precipitation of Fe-Cr-Al alloy is established incorporating grain boundary (GB) effects and irradiation-accelerated diffusion. The radiation source and grain boundary effect are incorporated to broaden the applicability of the Fe-Cr-Al precipitated phase-field model. The model is firstly employed to simulate the precipitation of the Cr-rich α' phase in a single-crystal alloy. The precipitation rate and the size distribution of the precipitated phase were analyzed. Subsequently, the model is utilized to simulate segregation at GBs in a double-crystal system, analyzing the enrichment of Cr and depletion of Al near these boundaries. The simulation results are consistent with experimental observations reported in the references. Finally, the model is applied to simulate the precipitation in a polycrystalline Fe-Cr-Al system. The simulated results revealed that the presence of GBs induces the formation of localized regions with enhanced Cr and Al content as well as depleted zones adjacent to these boundaries. GBs also diminish both the quantity and precipitation rate of the formed phase within the grains.

Pd/Cu Dual Metal-Catalyzed Regioselective [2 + 2 + 2] Cycloaddition of Malononitriles with Alkynes to Densely Substituted Pyridines.

Transition metal-catalyzed [2 + 2 + 2] cycloaddition of nitriles and two alkynes is an efficient method for assembling pyridines. However, examples employing palladium catalysis have rarely been disclosed, and the processes of reactivity and selectivity remain unclear. We report here a palladium/copper dual metal-catalyzed [2 + 2 + 2] cycloaddition of diynyl-tethered malononitriles and terminal alkynes to synthesize densely substituted pyridines. This method features a good substrate scope, synthetically useful yields, and perfect regioselectivity. The derivatization of the pyridine products demonstrates the potential application of this method in synthesizing heterocycles and as ligands in photocatalysis. Preliminary mechanistic studies suggest that the reaction undergoes aza-oxidative cycloaddition of Pd(0) with nitrile and alkyne, followed by alkyne insertion and reductive elimination. The presence of copper is crucial to its reactivity and regioselectivity.

On-Shelf and Operational Decay Dynamics of Self-Healing Quasi-Two-Dimensional Perovskite Light-Emitting Devices.

Currently, the external quantum efficiency (EQE) performance of perovskite light-emitting diodes (PeLEDs) is approaching its theoretical limit. The main drawback of PeLEDs is their stability. Ion migration in the perovskite layer is one of the main causes of the operational decomposition of PeLEDs. Here, we find that butylammonium-based quasi-two-dimensional (quasi-2D) PeLEDs show self-healing ability, revealing the existence of ion migration in the fabricated perovskite layer. Then, on the basis of the analysis of ∼170 operational decay EQE curves, patterns of on-shelf and operational decay in self-healing quasi-2D PeLEDs have been identified. The uneven distributions of resistance on the perovskite film surface are proposed to cause secondary electric fields. The electroluminescent scintillation in certain regions results in fluctuating electroluminescence of PeLEDs, further proving the existence of microcosmic steric ion movement under secondary electric fields. Our work explores the decay patterns of self-healing PeLEDs and highlights the impact of steric ion movements on the decay processes of PeLEDs.

Unified ionic and radical C-4 alkylation and arylation of pyridines.

C-H Functionalization of pyridines is an efficient strategy to access pyridine derivatives occurring in pharmaceuticals, agrochemicals, and materials. Nucleophilic additions to pyridiniums via both ionic and radical species have proven particularly useful. However, these reactions suffer from poor regioselectivity. By identifying an enzyme-mimic pocket-type urea activation reagent, we report a general platform for pyridine C-4 functionalization. Both ionic and radical nucleophiles can be incorporated to achieve the alkylation and arylation. Notably, the highly regioselective C-4 radical arylation is disclosed for the first time. The broad scope of nucleophiles and pyridines renders this platform applicable to the late-stage functionalization of drug-like molecules and the preparation of complex biologically important molecules.

Stress-Relief Engineering in a N-Doped C-Modified Hierarchical Nanoporous Si Anode with a Microcurved Pore Wall Structure for Enhanced Lithium Storage.

The commercialization of alloy-type anodes has been hindered by rapid capacity degradation due to volume fluctuations. To address this issue, stress-relief engineering is proposed for Si anodes that combines hierarchical nanoporous structures and modified layers, inspired by the phenomenon in which structures with continuous changes in curvature can reduce stress concentration. The N-doped C-modified hierarchical nanoporous Si anode with a microcurved pore wall (N-C@m-HNP Si) is prepared from inexpensive Mg-55Si alloys using a simple chemical etching and heat treatment process. When used as the anode for lithium-ion batteries, the N-C@m-HNP Si anode exhibits initial charge/discharge specific capacities of 1092.93 and 2636.32 mAh g-1 at 0.1 C (1 C = 3579 mA g-1), respectively, and a stable reversible specific capacity of 1071.84 mAh g-1 after 200 cycles. The synergy of the hierarchical porous structure with a microcurved pore wall and the N-doped C-modified layer effectively improves the electrochemical performance of N-C@m-HNP Si, and the effectiveness of stress-relief engineering is quantitatively analyzed through the theory of elastic bending of thin plates. Moreover, the formation process of Li15Si4 crystals, which causes substantial mechanical stress, is investigated using first-principles molecular dynamic simulations to reveal their tendency to occur at different scales. The results demonstrate that the hierarchical nanoporous structure helps to inhibit the transformation of amorphous LixSi into metastable Li15Si4 crystals during lithiation.

Chronic exposure to tire rubber-derived contaminant 6PPD-quinone impairs sperm quality and induces the damage of reproductive capacity in male mice.

It has been reported that N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-Q), a derivative of the tire antioxidant, N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD), exhibits acute toxicity towards organisms. However, the possible reproductive toxicity of 6PPD-Q in mammals has rarely been reported. In this study, the effects of 6PPD-Q on the reproductive toxicity of C57Bl/6 male mice were assessed after exposure to 6PPD-Q for 40 days at 4 mg/kg body weight (bw). Exposure to 6PPD-Q not only led to a decrease in testosterone levels but also adversely affected semen quality and in vitro fertilization (IVF) outcomes, thereby indicating impaired male fertility resulting from 6PPD-Q exposure. Additionally, transcriptomic and metabolomic analyses revealed that 6PPD-Q elicited differential expression of genes and metabolites primarily enriched in spermatogenesis, apoptosis, arginine biosynthesis, and sphingolipid metabolism in the testes of mice. In conclusion, our study reveals the toxicity of 6PPD-Q on the reproductive capacity concerning baseline endocrine disorders, sperm quality, germ cell apoptosis, and the sphingolipid signaling pathway in mice. These findings contribute to an enhanced understanding of the health hazards posed by 6PPD-Q to mammals, thereby facilitating the development of more robust safety regulations governing the utilization and disposal of rubber products.

Designing 3D SnS@Cu-Ni Nanoporous Column Array Electrode for High-Capacity and High-Rate Lithium-Ion Batteries.

Sn-based materials with high capacity showcase great potential for next-generation lithium-ion batteries (LIBs). Yet, the large volume change and limited ion/electron transfer efficiency of Sn-based materials upon operation significantly compromises the battery performance. In this study, a unique 3D copper-nickel nanoporous column array current collector is rationally developed via a facile template-free galvanostatic electrodeposition method, followed by electrodepositing SnS active material onto it (denoted as 3D SnS@CNCA). Excitingly, the morphology of the 3D SnS@CNCA electrode perfectly inherited the nanoporous column array structure of the 3D current collector, which not only endows the electrode with a large specific surface area to provide more active sites and sufficient ion/electron transport pathways, but also effectively alleviates the volume expansion of SnS upon repeated charge-discharge cycles. Therefore, the binder-free 3D SnS@CNCA electrode showcases a significantly enhanced Li storage performance, showing a high initial reversible capacity of 1019.7 mAh g-1 with noteworthy cycling stability (a capacity retention rate of 89.4% after 200 cycles). Moreover, the designed electrode also manifests high rate performance with a high capacity of 570.6 mAh g-1 at 4 A g-1. This work provides a novel design idea for the preparation of high-performance electrodes beyond LIBs.

Constructing Adsorption Site-Enhanced Vo-BiOCl/rGO Heterostructures for Efficient Response to NO2/NH3 Gases at Room Temperature.

Real-time detection of harmful gases at room temperature has become a serious problem in public health and environmental monitoring. Two-dimensional materials with semiconductor properties BiOCl is a promising gas-sensitive material due to its large specific surface area and adjustable band gap as well as outstanding safety characteristics. However, limited by the weak gas adsorption sites and sluggish charge-transfer ability, the performance of BiOCl could not be fully exploited. Oxygen vacancy (Vo) engineering can introduce lattice defects, thereby significantly increasing the local charge density and enhancing the adsorption of gases, which is an effective strategy to enhance the gas-sensing performance. In this work, we composite BiOCl with a vacancy (Vo-BiOCl) and reduced graphene oxide (rGO) to construct a Vo-BiOCl/rGO heterostructure with enhanced gas adsorption sites. Experimental and theoretical calculations show that Vo can enhance the adsorption of gases and the introduction of rGO forms a high-quality heterostructure with BiOCl, which can effectively reduce the band gap of BiOCl and promote electron transfer, thereby improving the sensitivity of the sensor. Benefiting from above, Vo-BiOCl/rGO achieves the ability to detect low concentrations of NO2/NH3 at room temperature, with high sensitivity (55% at 1 ppm of NO2 and -28% at 1 ppm of NH3), fast response time (40 s at 1 ppm of NO2 and 2 s at 1 ppm of NH3), good stability (over 150 days), and fully recoverable gas sensitivity.

Self-Powered Visible-Blind Ultraviolet Photodetector Based on Organic-Inorganic Hybrid Copper Halide [N(C2H5)4]2[Cu2Br4].

Organic-inorganic hybrid ternary copper halides offer a broader spectrum of structural possibilities for finely tuning their optoelectronic properties. Herein, we demonstrate for the first time the potential of [N(C2H5)4]2[Cu2Br4], a zero-dimensional hybrid copper halide [(TEA)2Cu2Br4], for ultraviolet (UV) photodetection. A self-powered, visible-blind UV photodetector based on a (TEA)2Cu2Br4/GaN heterojunction architecture is developed, exhibiting a high responsivity, a high detectivity, and fast response speeds. The device demonstrates exceptional stability against environmental oxygen/moisture, heat, and UV light illumination, surpassing the stability of reported copper-based UV photodetectors. Our work highlights the significant potential of (TEA)2Cu2Br4 as a lead-free, stable, and efficient material for next-generation UV photodetection technology.