Perspectives in Wearable Systems in the Human-Robot Interaction (HRI) Field.

Due to the advantages of ease of use, less motion disturbance, and low cost, wearable systems have been widely used in the human-machine interaction (HRI) field. However, HRI in complex clinical rehabilitation scenarios has further requirements for wearable sensor systems, which has aroused the interest of many researchers. However, the traditional wearable system has problems such as low integration, limited types of measurement data, and low accuracy, causing a gap with the actual needs of HRI. This paper will introduce the latest progress in the current wearable systems of HRI from four aspects. First of all, it introduces the breakthroughs of current research in system integration, which includes processing chips and flexible sensing modules to reduce the system's volume and increase battery life. After that, this paper reviews the latest progress of wearable systems in electrochemical measurement, which can extract single or multiple biomarkers from biological fluids such as sweat. In addition, the clinical application of non-invasive wearable systems is introduced, which solves the pain and discomfort problems caused by traditional clinical invasive measurement equipment. Finally, progress in the combination of current wearable systems and the latest machine-learning methods is shown, where higher accuracy and indirect acquisition of data that cannot be directly measured is achieved. From the evidence presented, we believe that the development trend of wearable systems in HRI is heading towards high integration, multi-electrochemical measurement data, and clinical and intelligent development.

Automatic Assessments of Parkinsonian Gait with Wearable Sensors for Human Assistive Systems.

The rehabilitation evaluation of Parkinson's disease has always been the research focus of human assistive systems. It is a research hotspot to objectively and accurately evaluate the gait condition of Parkinson's disease patients, thereby adjusting the actuators of the human-machine system and making rehabilitation robots better adapt to the recovery process of patients. The rehabilitation evaluation of Parkinson's disease has always been the research focus of rehabilitation robots. It is a research hotspot to be able to objectively and accurately evaluate the recovery of Parkinson's disease patients, thereby adjusting the driving module of the human-machine collaboration system in real time, so that rehabilitation robots can better adapt to the recovery process of Parkinson's disease. The gait task in the Unified Parkinson's Disease Rating Scale (UPDRS) is a widely accepted standard for assessing the gait impairments of patients with Parkinson's disease (PD). However, the assessments conducted by neurologists are always subjective and inaccurate, and the results are determined by the neurologists' observation and clinical experience. Thus, in this study, we proposed a novel machine learning-based method of automatically assessing the gait task in UPDRS with wearable sensors as a more convenient and objective alternative means for PD gait assessment. In the design, twelve gait features, including three spatial-temporal features and nine kinematic features, were extracted and calculated from two shank-mounted IMUs. A novel nonlinear model is developed for calculating the score of gait task from the gait features. Twenty-five PD patients and twenty-eight healthy subjects were recruited for validating the proposed method. For comparison purpose, three traditional models, which have been used in previous studies, were also tested by the same dataset. In terms of percentages of participants, 84.9%, 73.6%, 73.6%, and 66.0% of the participants were accurately assigned into the true level with the proposed nonlinear model, the support vector machine model, the naive Bayes model, and the linear regression model, respectively, which indicates that the proposed method has a good performance on calculating the score of the UPDRS gait task and conformance with the rating done by neurologists.

Molecular landscape of IDH-wild-type, H3-wild-type glioblastomas of adolescents and young adults.

OBJECTIVE: We aimed to characterise glioblastomas of adolescents and young adults (AYAs) that were isocitrate dehydrogenase (IDH) wild type (wt) and H3wt. MATERIALS AND METHODS: Fifty such patients (aged 16-32) were studied by methylation profiling, targeted sequencing and targeted RNA-seq. RESULTS: Tumours predominantly clustered into three methylation classes according to the terminology of Capper et al. (2018): (anaplastic) pleomorphic xanthoastrocytoma (PXA) (21 cases), GBM_midline (15 cases) and glioblastoma RTK/mesenchymal (seven cases). Two cases clustered with ANA_PA, four cases with LGG classes and one with GBM_MYCN. Only fifteen cases reached a calibrated score >0.84 when the cases were uploaded to DKFZ Classifier. GBM_midline-clustered tumours had a poorer overall survival (OS) compared with the PXA-clustered tumours (p = 0.030). LGG-clustered cases had a significantly better survival than GBM_midline-clustered tumours and glioblastoma RTK/mesenchymal-clustered tumours. Only 13/21 (62%) of PXA-clustered cases were BRAF V600E mutated. Most GBM_midline-clustered cases were not located in the midline. GBM_midline-clustered cases were characterised by PDGFRA amplification/mutation (73.3%), mutations of mismatch repair genes (40.0%), and all showed H3K27me3 and EZH1P loss, and an unmethylated MGMT promoter. Across the whole cohort, MGMT promoter methylation and wt TERT promoter were favourable prognosticators. Mismatch repair gene mutations were poor prognosticators and together with methylation class and MGMT methylation, maintained their significance in multivariate analyses. BRAF mutation was a good prognosticator in the PXA-clustered tumours. CONCLUSION: Methylation profiling is a useful tool in the diagnosis and prognostication of AYA glioblastomas, and the methylation classes have distinct molecular characteristics. The usual molecular diagnostic criteria for adult IDHwt glioblastoma should be applied with caution within the AYA age group.

Population genetic analysis of the Plasmodium falciparum erythrocyte binding antigen-175 (EBA-175) gene in Equatorial Guinea.

BACKGROUND: Plasmodium falciparum erythrocyte binding antigen-175 (PfEBA-175) is a candidate antigen for a blood-stage malaria vaccine, while various polymorphisms and dimorphism have prevented to development of effective vaccines based on this gene. This study aimed to investigate the dimorphism of PfEBA-175 on both the Bioko Island and continent of Equatorial Guinea, as well as the genetic polymorphism and natural selection of global PfEBA-175. METHODS: The allelic dimorphism of PfEBA-175 region II of 297 bloods samples from Equatorial Guinea in 2018 and 2019 were investigated by nested polymerase chain reaction and sequencing. Polymorphic characteristics and the effect of natural selection were analyzed using MEGA 7.0, DnaSP 6.0 and PopART programs. Protein function prediction of new amino acid mutation sites was performed using PolyPhen-2 and Foldx program. RESULTS: Both Bioko Island and Bata district populations, the frequency of the F-fragment was higher than that of the C-fragment of PfEBA-175 gene. The PfEBA-175 of Bioko Island and Bata district isolates showed a high degree of genetic variability and heterogeneity, with π values of 0.00407 & 0.00411 and Hd values of 0.958 & 0.976 for nucleotide diversity, respectively. The values of Tajima's D of PfEBA-175 on Bata district and Bioko Island were 0.56395 and - 0.27018, respectively. Globally, PfEBA-175 isolates from Asia were more diverse than those from Africa and South America, and genetic differentiation quantified by the fixation index between Asian and South American countries populations was significant (FST > 0.15, P < 0.05). A total of 310 global isolates clustered in 92 haplotypes, and only one cluster contained isolates from three continents. The mutations A34T, K109E, D278Y, K301N, L305V and D329N were predicted as probably damaging. CONCLUSIONS: This study demonstrated that the dimorphism of F-fragment PfEBA-175 was remarkably predominant in the study area. The distribution patterns and genetic diversity of PfEBA-175 in Equatorial Guinea isolates were similar another region isolates. And the levels of recombination events suggested that natural selection and intragenic recombination might be the main drivers of genetic diversity in global PfEBA-175. These results have important reference value for the development of blood-stage malaria vaccine based on this antigen.

Genetic diversity and natural selection on the thrombospondin-related adhesive protein (TRAP) gene of Plasmodium falciparum on Bioko Island, Equatorial Guinea and global comparative analysis.

BACKGROUND: Thrombospondin-related adhesive protein (TRAP) is a transmembrane protein that plays a crucial role during the invasion of Plasmodium falciparum into liver cells. As a potential malaria vaccine candidate, the genetic diversity and natural selection of PfTRAP was assessed and the global PfTRAP polymorphism pattern was described. METHODS: 153 blood spot samples from Bioko malaria patients were collected during 2016-2018 and the target TRAP gene was amplified. Together with the sequences from database, nucleotide diversity and natural selection analysis, and the structural prediction were preformed using bioinformatical tools. RESULTS: A total of 119 Bioko PfTRAP sequences were amplified successfully. On Bioko Island, PfTRAP shows its high degree of genetic diversity and heterogeneity, with π value for 0.01046 and Hd for 0.99. The value of dN-dS (6.2231, p < 0.05) hinted at natural selection of PfTRAP on Bioko Island. Globally, the African PfTRAPs showed more diverse than the Asian ones, and significant genetic differentiation was discovered by the fixation index between African and Asian countries (Fst > 0.15, p < 0.05). 667 Asian isolates clustered in 136 haplotypes and 739 African isolates clustered in 528 haplotypes by network analysis. The mutations I116T, L221I, Y128F, G228V and P299S were predicted as probably damaging by PolyPhen online service, while mutations L49V, R285G, R285S, P299S and K421N would lead to a significant increase of free energy difference (ΔΔG > 1) indicated a destabilization of protein structure. CONCLUSIONS: Evidences in the present investigation supported that PfTRAP gene from Bioko Island and other malaria endemic countries is highly polymorphic (especially at T cell epitopes), which provided the genetic information background for developing an PfTRAP-based universal effective vaccine. Moreover, some mutations have been shown to be detrimental to the protein structure or function and deserve further study and continuous monitoring.

High-performance mid-infrared photodetection based on Bi2Se3 maze and free-standing nanoplates.

The pursuit of optoelectronic devices operating in mid-infrared regime is driven by both fundamental interests and commercial applications. The narrow bandgap (0.3 eV) of layered Bi2Se3 makes it a promising material for mid-infrared photodetection. However, the weak absorption of mid-infrared optical power and high dark current level restrict its performance. Here, a supply-control technique is applied to modulate the growth mode of Bi2Se3 crystal, and Bi2Se3 crystals with various morphologies are obtained. The nanoplates pattern transits from maze to freestanding when source mass was tuned. Due to the strong infrared absorption and photoelectric conversion efficiency of vertical Bi2Se3 nanoplates, the as-prepared vertical Bi2Se3 nanoplates/Si heterojunction shows excellent photoresponse and extremely low dark current. Among these devices based on different Bi2Se3 morphologies, freestanding nanoplates show the optimal mid-infrared characteristics, namely a photo-to-dark ratio of 2.0 × 104, a dark current of 0.21 pA, a response time of 23 ms, a specific detectivity of 6.1 × 1010 Jones (calculated) and 1.2 × 1010 Jones (measured) under 2.7 µm illumination and at room temperature. Notably, the specific detectivity of our devices are comparable to commercial InGaAs photodetectors. With the tunable- morphology growing technique and excellent photoresponding characteristics, Bi2Se3 nanomaterials are worth attention in optoelectronic field.

Genetic polymorphism of Plasmodium falciparum circumsporozoite protein on Bioko Island, Equatorial Guinea and global comparative analysis.

BACKGROUND: Plasmodium falciparum circumsporozoite protein (PfCSP) is a potential malaria vaccine candidate, but various polymorphisms of the pfcsp gene among global P. falciparum population become the major barrier to the effectiveness of vaccines. This study aimed to investigate the genetic polymorphisms and natural selection of pfcsp in Bioko and the comparison among global P. falciparum population. METHODS: From January 2011 to December 2018, 148 blood samples were collected from P. falciparum infected Bioko patients and 96 monoclonal sequences of them were successfully acquired and analysed with 2200 global pfcsp sequences mined from MalariaGEN Pf3k Database and NCBI. RESULTS: In Bioko, the N-terminus of pfcsp showed limited genetic variations and the numbers of repetitive sequences (NANP/NVDP) were mainly found as 40 (35%) and 41 (34%) in central region. Most polymorphic characters were found in Th2R/Th3R region, where natural selection (p > 0.05) and recombination occurred. The overall pattern of Bioko pfcsp gene had no obvious deviation from African mainland pfcsp (Fst = 0.00878, p < 0.05). The comparative analysis of Bioko and global pfcsp displayed the various mutation patterns and obvious geographic differentiation among populations from four continents (p < 0.05). The global pfcsp C-terminal sequences were clustered into 138 different haplotypes (H_1 to H_138). Only 3.35% of sequences matched 3D7 strain haplotype (H_1). CONCLUSIONS: The genetic polymorphism phenomena of pfcsp were found universal in Bioko and global isolates and the majority mutations located at T cell epitopes. Global genetic polymorphism and geographical characteristics were recommended to be considered for future improvement of malaria vaccine design.

Highly stable all-in-one photoelectrochemical electrodes based on carbon nanowalls.

Photoelectrochemical (PEC) cells offer a promising approach for developing low-cost solar energy conversion systems. However, the lack of stable and cost-effective electrodes remains a bottleneck that hampers their practical applications. Here, we propose a kind of integrated all-in-one three-dimensional (3D) carbon nanowall (CNW) electrode without sensitized semiconductors for stable all-carbon PEC cells. The all-in-one CNW electrodes were fabricated by directly growing CNW on both sides of the SiO2/Si/SiO2 wafer employing the radio frequency plasmon enhanced chemical vapor deposition method. Benefitting from the interconnected 3D textured structure, the CNW can effectively absorb the incident light and provide a large electrochemical reaction interface at the CNW surface that promotes the separation of photogenerated charge carriers, which makes it a superior electrode material. Experimental results show that the all-in-one CNW electrodes possess excellent PEC performance with a photocurrent density of 830 µA cm-2. Moreover, the CNW electrodes exhibit excellent photoresponses over a wide waveband and superior stability with a maintained photocurrent response, even after 60 d, which outperforms the electrodes using the other two-dimensional layered materials or semiconductor sensitized electrodes. Such an all-in-one electrode with impressive photovoltaic properties provides a promising platform for PEC applications that is eco-friendly with high efficiency, excellent stability and low cost.

Hybrid graphene heterojunction photodetector with high infrared responsivity through barrier tailoring.

The graphene/Si heterojunction is attractive for high gain and broadband photodetection through photogating effect. However, the photoresponsivity in these devices are still limited to under 1 A W-1 if no narrowband absorption-enhanced nanostructures were used. In this paper, the effects of barriers on photoresponse are systematically studied at 1550 nm wavelength. Different barrier heights are obtained through selection of substrates, graphene doping and electrical tuning. Lower barrier height for graphene side and higher barrier height for silicon side are found to be beneficial for better infrared photoresponse. Through Polyetherimide doping of graphene and back-gated electrical modulation, the responsivity finally reached 5.71 A W-1, which to our knowledge is among the best results for graphene-based infrared photodetectors with graphene adopted as a light-absorption material. It is found that the thermionic emission efficiency of indirect transition in graphene is related to the difference in emissioin barrier height, and the lifetime of photoinduced carriers in the channel can be enhanced by built-in potential. These results lay the foundation for the photodetection applicatioins of graphene/Si heterojunction in the longer-wavelength infrared region.

Genetic diversity and allele frequencies of Plasmodium falciparum msp1 and msp2 in parasite isolates from Bioko Island, Equatorial Guinea.

BACKGROUND: Malaria is still a serious public health problem on Bioko Island (Equatorial Guinea), although the number of annual cases has been greatly reduced since 2004 through the Bioko Island Malaria Control Project (BIMCP). A better understanding of malaria parasite population diversity and transmission dynamics is critical for assessing the effectiveness of malaria control measures. The objective of this study is to investigate the genetic diversity of Plasmodium falciparum populations and multiplicity of infection (MOI) on Bioko Island 7 years after BIMCP. METHODS: A total of 181 patients with uncomplicated P. falciparum malaria diagnosed with microscopy were collected from Bioko Island from January 2011 to December 2014. Parasite DNA was extracted using chelex-100 and species were identified using a real-time PCR followed by high-resolution melting. Plasmodium falciparum msp1 and msp2 allelic families were determined using nested PCR. RESULTS: Three msp1 alleles (K1, MAD20, and RO33) and two msp2 alleles (FC27 and 3D7) were analysed in all samples. In msp1, the MAD20 allelic family was predominant with 96.69% (175/178) followed respectively by the K1 allelic family with 96.07% (171/178) and R033 allelic family with 70.78% (126/178). In msp2, the FC27 allelic family was the most frequently detected with 97.69% (169/173) compared to 3D7 with 72.25% (125/173). Twenty-six different alleles were observed in msp1 with 9 alleles for K1, 9 alleles for MAD20 and 8 alleles for R033. In msp2, 25 individual alleles were detected with 5 alleles for FC27 and 20 alleles for 3D7. The overall MOI was 5.51 with respectively 3.5 and 2.01 for msp1 and msp2. A significant increase in overall MOI was correlated with the age group of the patients (P = 0.026) or parasite densities (P = 0.04). CONCLUSIONS: The present data showed high genetic diversity and MOI values among the P. falciparum population in the study, reflecting both the high endemic level and malaria transmission on Bioko Island. These data provide valuable information for surveillance of P. falciparum infection and for assessing the appropriateness of the current malarial control strategies in the endemic area.

Structural Insights and the Surprisingly Low Mechanical Stability of the Au-S Bond in the Gold-Specific Protein GolB.

The coordination bond between gold and sulfur (Au-S) has been widely studied and utilized in many fields. However, detailed investigations on the basic nature of this bond are still lacking. A gold-specific binding protein, GolB, was recently identified, providing a unique opportunity for the study of the Au-S bond at the molecular level. We probed the mechanical strength of the gold-sulfur bond in GolB using single-molecule force spectroscopy. We measured the rupture force of the Au-S bond to be 165 pN, much lower than Au-S bonds measured on different gold surfaces (∼1000 pN). We further solved the structures of apo-GolB and Au(I)-GolB complex using X-ray crystallography. These structures showed that the average Au-S bond length in GolB is much longer than the reported average value of Au-S bonds. Our results highlight the dramatic influence of the unique biological environment on the stability and strength of metal coordination bonds in proteins.

Simple whole-cell biodetection and bioremediation of heavy metals based on an engineered lead-specific operon.

A lead-specific binding protein, PbrR, and promoter pbr from the lead resistance operon, pbr, of Cupriavidus metallidurans CH34 was incorporated into E. coli in conjunction with an engineered downstream RFP (red fluorescence protein), which allowed for highly sensitive and selective whole-cell detection of lead ions. The subsequent display of PbrR on the E. coli cell surface permitted selective adsorption of lead ions from solution containing various heavy metal ions. The surface-engineered E. coli bacteria effectively protected Arabidopsis thaliana seed germination from the toxicity of lead ions at high concentrations. Engineering the E. coli bacteria harboring these lead-specific elements from the pbr operon may potentially be a valuable general strategy for biodetection and bioremediation of toxic heavy metal ions in the environment.

Optimization of Desalination Efficiency and Exploratory Applications of TiO2 Active Site Electrode Enhanced by Activated Carbon and Tween 80 in Capacitive Deionization Technology.

Capacitive deionization (CDI) is an emerging desalination technology for seawater desalination. The development of high-desalination and long-life electrode materials is a research focus in the global water treatment field. In this experiment, Tween T80 was used as a surface activator, and a modified electrode was prepared by facilitating the deposition of TiO2 active sites onto the surface of activated carbon through a sol-gel/hydrothermal two-step synthesis strategy. The morphology and specific surface area of the composite material were analyzed through scanning electron microscopy, specific surface area measurements, and contact angle tests. The results indicated that the sol-gel/hydrothermal two-step synthesis strategy played a crucial role in the homogeneous combination and performance enhancement of the composite material. Under constant voltage mode, when the working voltage was 1.2 V, the desalination capacity of this composite material in a NaCl solution with an initial conductivity of 3000 µS·cm-1 reached 23.8 mg·g-1 (26% higher than materials prepared by conventional sol-gel methods). After 150 cycles, the capacity retention rate was 78%, and the retention capacity was significant (87%). Overall, the results demonstrate the potential of the sol-gel/hydrothermal two-step synthesis strategy in preparing high-performance CDI electrode materials. The modified electrode prepared using this method offers enhanced desalination capacity and durability, making it a promising candidate for seawater desalination and other water treatment applications.

An IMU-Based Ground Reaction Force Estimation Method and Its Application in Walking Balance Assessment.

Walking is one of the most common daily movements of the human body. Therefore, quantitative evaluation of human walking has been commonly used to assist doctors in grasping the disease degree and rehabilitation process of patients in the clinic. Compared with the kinematic characteristics, the ground reaction force (GRF) during walking can directly reflect the dynamic characteristics of human walking. It can further help doctors understand the degree of muscle recovery and joint coordination of patients. This paper proposes a GRF estimation method based on the elastic elements and Newton-Euler equation hybrid driving GRF estimation method. Compared with the existing research, the innovations are as follows. 1) The hardware system consists of only two inertial measurement units (IMUs) placed on shanks. The acquisition of the overall motion characteristics of human walking is realized through the simplified four-link walking model and the thigh prediction method. 2) The method was validated not only on 10 healthy subjects but also on 11 Parkinson's patients and 10 stroke patients with normalized mean absolute errors (NMAEs) of 5.95%±1.32%, 6.09%±2.00%, 5.87%±1.59%. 3) This paper proposes a dynamic balance assessment method based on the acquired motion data and the estimated GRF. It evaluates the overall balance ability and fall risk at four key time points for all subjects recruited. Because of the low-cost system, ease of use, low motion interference and environmental constraints, and high estimation accuracy, the proposed GRF estimation method and walking balance automatic assessment have broad clinical value.

Correction of plasma fat-soluble vitamin levels by blood lipids in elderly patients with coronary heart disease.

This study aims to investigate the correlation between plasma fat-soluble vitamin levels and blood lipid in elderly patients with coronary heart disease (CHD). A total of 120 participants were enrolled, including 60 CHD patients and 60 controls without CHD. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used to quantify plasma levels of vitamins A, D3, E, and K. Data analysis was conducted using the statistical analysis system module of MetaboAnalyst 5.0. The CHD group showed significantly higher levels of plasma total cholesterol (TC), triglycerides (TG), and low-density lipoprotein cholesterol (LDL-C) but not high-density lipoprotein cholesterol (HDL-C) compared to controls. The CHD group exhibited significantly higher plasma levels of VA and VE, positively correlating with TC, TG, and LDL-C. After adjusted by TG levels, the CHD group had significantly lower plasma levels of VA and VE, negatively correlating with TC, TG, and LDL-C. The CHD group also had significantly lower concentrations of VD3, independent of TG modification, compared to controls. VD3 negatively correlated with TC, TG, and LDL-C. Elderly individuals with CHD display abnormal blood lipid metabolism, and fat-soluble vitamins adjusted by TG levels can more accurately and timely response to implicit fat-soluble vitamins deficiency in CHD patients.

High-sensitive measurement of water vapor: shot-noise level performance via a noise canceller.

Taking advantages of distributed feedback laser diode a technique is described to achieve high-sensitive measurement for water vapor concentration. This technique, with a modified balanced ratio metric detection system, has improved the accuracy of measured absorption spectrum by two main aspects. Improvement by matching equivalent conductivity of signal or reference photo detector (PD) is presented, and with the additional matched resistance suppression for the power variation in the signal-beam has been improved from 53 to 88 dB. The importance of integrating amplifier bandwidth design from the circuit to the measured absorption spectrum has been demonstrated in our experiment. For a scan rate of 32 Hz with an optimal corresponding bandwidth of 15.9 kHz, the absorption spectrum is well described by Voigt profile, with a difference of 1% at an atmosphere pressure of 1 atm and a room temperature of 296 K. With the application of averaging and filtering, absorption sensitivity of 1.093×10(-6) for water vapor at 1368.597 nm has been demonstrated, and the corresponding concentration is 71.8 ppb in just a 10 cm path length.

Measurement and analysis of water vapor inside optical components for optical fiber H2O sensing system.

Water vapor existing inside internal end-face gaps of optical components of an optical fiber H2O sensing system makes it possible to influence the measurement accuracy and stability. The influence principle has been briefly analyzed based on the structure of three main optical components: a distributed feedback laser diode (DFB-LD), a collimator, and a photoelectric diode (PD). With application of a differential technique, the influence of water vapor inside the DFB-LD can be removed. With reasonable recombination of the collimator and the PD in a dual-beam detection system, the influence of water vapor inside the collimator and the PD's end-face gaps has been suppressed from more than 1.57×10(-3) to as low as -2.175×10(-5) in absorbance. After H2O isolation processing water vapor inside the end-face gaps of the DFB-LD, the collimator, and the PD can be utilized as a reference to design a simple but feasible H2O sensor. As a result, good linearity with an R2 of 0.9964 has been realized in a concentration range of 39-2110 ppm during an application test, and a long-term test of the designed H2O sensor against the S8000 with a difference of 10 ppm has been achieved.

Reliability analysis and comparison of demodulation methods for dual-beam wavelength-modulation spectroscopy water vapor detection.

Subtraction, division, and balanced ratiometric detection (BRD) are three extensively used demodulation methods for dual-beam wavelength-modulation trace gas detection. However, reliability comparisons among these methods under changing environmental conditions were rarely researched. In this paper, the influences of ambient temperature and bend loss of fibers are analyzed in detail, and the reliabilities of the subtraction, division, and BRD methods are quantitatively compared for the first time to our knowledge. When the ambient temperature is increased by 1°C, the deviation of the division method is only 0.29%, which obviously outperforms the subtraction method (2.90%) and the BRD method (0.55%). Furthermore, a concept, "power fluctuation rejection ratio," is introduced to compare the suppression effects of the subtraction, division, and BRD methods on the laser light source power fluctuation. The study results demonstrate that the division method provides better reliability when the ambient temperature or bending loss is varied. The validity and reliability are fully verified by the fact that the experimental results give good agreement with the theoretical simulation.

Near-ultraviolet irradiation to stimulate unmodified polyether ether ketone to achieve stable and sustainable antibacterial activity.

OBJECTIVES: This study aims to investigate the cytotoxicity and sustainable antibacterial activity of unmodified PEEK under specific wavelength light treatment (365 nm), and its antibacterial mechanism was also preliminarily discussed. METHODS: A near-ultraviolet source with a wavelength of 365 nm and a power of 5 W were selected. The irradiation time was 30 min, and the distance was 100 mm. A water contact angle tester was used to characterize the surface of the PEEK after 1-15 light treatments. MC3TC-E1 cells were used to evaluate the cytotoxicity of the materials under light treatment. Five kinds of common oral bacteria were detected in vitro, and antibacterial efficiency was determined by colony-forming unit (CFU) and scanning electron microscope (SEM). The antibacterial mechanism of PEEK under light was preliminarily discussed by spectrophotometry. The membrane rupture of Staphylococcus aureus and Escherichia coli was detected by lactate dehydrogenase. Staphylococcus aureus and Staphylococcus mutans were selected for the cyclic antibacterial test. Statistical analysis was performed by one-way analysis of variance and Tukey multiple range test. A significance level of 0.05 was considered (α = 0.05). RESULTS: The results of the cell experiment showed that PEEK had no cytotoxicity (P > 0.05). CFU results showed that PEEK had an obvious antibacterial effect on Staphylococcus aureus, Staphylococcus mutans, Staphylococcus gordonii and Staphylococcus sanguis, but had no antibacterial effect on Escherichia coli (P < 0.05). The SEM results also verified the above antibacterial effect. The existence of singlet oxygen was confirmed by spectrophotometry. Meanwhile, the rupture of Staphylococcus aureus membrane was verified by lactate dehydrogenase assay. The water contact angle of the PEEK surface did not change significantly after 15 cycles of light treatment. Cyclic antibacterial experiments showed that the antibacterial effect was sustainable. CONCLUSIONS: This study showed that PEEK has good cytocompatibility with stable and sustainable antibacterial properties under near-ultraviolet. It provides a new idea to solve the non-antibacterial property of PEEK, and also provides a theoretical basis for its further application in dentistry.

An unexpected all-metal aromatic tetranuclear silver cluster in human copper chaperone Atox1.

Metal clusters, such as iron-sulfur clusters, play key roles in sustaining life and are intimately involved in the functions of metalloproteins. Herein we report the formation and crystal structure of a planar square tetranuclear silver cluster when silver ions were mixed with human copper chaperone Atox1. Quantum chemical studies reveal that two Ag 5s1 electrons in the tetranuclear silver cluster fully occupy the one bonding molecular orbital, with the assumption that this Ag4 cluster is Ag4 2+, leading to extensive electron delocalization over the planar square and significant stabilization. This bonding pattern of the tetranuclear silver cluster represents an aromatic all-metal structure that follows a 4n + 2 electron counting rule (n = 0). This is the first time an all-metal aromatic silver cluster was observed in a protein.