DACH1 attenuated PA-induced renal tubular injury through TLR4/MyD88/NF-κB and TGF-ß/Smad signalling pathway.

BACKGROUND: Palmitic acid (PA), the major saturated fatty acid in the blood, often induces the initiation and progression of diabetic kidney disease (DKD). However, the underlying mechanism remains unclear. DACH1 is an important regulator of kidney functions. Herein, we investigated the roles of DACH1 in PA-induced kidney injury. METHODS: Clinical data from the NHANES database were subjected to analyse the association between serum PA (sPA), blood glucose and kidney function. Molecular docking of PA was performed with DACH1. Immunohistochemistry, cell viability, annexin V/7-AAD double staining, TUNEL assay, immunofluorescent staining, autophagic flux analysis, qRT-PCR and western blot were performed. RESULTS: Clinical data confirmed that sPA was increased significantly in the pathoglycemia individuals compared with controls and correlated negatively with renal function. Our findings suggested that PA could dock with DACH1. DACH1 enhances cell viability by inhibiting apoptosis and attenuating autophagy blockage induced by PA. Furthermore, the results demonstrated that DACH1 ameliorated inflammation and fibrosis through TLR4/MyD88/NF-κB and TGF-ß/Smad signalling pathway in PA-treated renal tubular epithelial cell line (HK-2). CONCLUSIONS: This study proved that sPA presents a risk factor for kidney injuries and DACH1 might serve as a protective target against renal function deterioration in diabetic patients.

[Prognostic nutritional index application value for acute-on-chronic liver failure co-infection].

Objective: To explore the predictive value of the prognostic nutritional index (PNI) in concurrently infected patients with acute-on-chronic liver failure (ACLF). Methods: 220 cases with ACLF diagnosed and treated at the First Affiliated Hospital of Xi'an Jiaotong University from January 2011 to December 2016 were selected. Patients were divided into an infection and non-infection group according to whether they had co-infections during the course of the disease. Clinical data differences were compared between the two groups of patients. Binary logistic regression analysis was used to screen out influencing factors related to co-infection. The receiver operating characteristic curve was used to evaluate the predictive value of PNI for ACLF co-infection. The measurement data between groups were compared using the independent sample t-test and the Mann-Whitney U rank sum test. The enumeration data were analyzed using the Fisher exact probability test or the Pearson χ(2) test. The Pearson method was performed for correlation analysis. The independent risk factors for liver failure associated with co-infection were analyzed by multivariate logistic analysis. Results: There were statistically significant differences in ascites, hepatorenal syndrome, PNI score, and albumin between the infection and the non-infection group (P < 0.05). Among the 220 ACLF cases, 158 (71.82%) were infected with the hepatitis B virus (HBV). The incidence rate of infection during hospitalization was 69.09% (152/220). The common sites of infection were intraabdominal (57.07%) and pulmonary infection (29.29%). Pearson correlation analysis showed that PNI and MELD-Na were negatively correlated (r = -0.150, P < 0.05). Multivariate logistic analysis results showed that low PNI score (OR=0.916, 95%CI: 0.865~0.970), ascites (OR=4.243, 95%CI: 2.237~8.047), and hepatorenal syndrome (OR=4.082, 95%CI : 1.106~15.067) were risk factors for ACLF co-infection (P < 0.05). The ROC results showed that the PNI curve area (0.648) was higher than the MELD-Na score curve area (0.610, P < 0.05). The effectiveness of predicting infection risk when PNI was combined with ascites and hepatorenal syndrome complications was raised. Patients with co-infections had a good predictive effect when PNI ≤ 40.625. The sensitivity and specificity were 84.2% and 41.2%, respectively. Conclusion: Low PNI score and ACLF co-infection have a close correlation. Therefore, PNI has a certain appraisal value for ACLF co-infection.

[The surgical management of axillary lymph node disease in breast cancer patients].

The precise assessment and management of the axillary lymph nodes in breast cancer is crucial for regional control, disease staging, selection of adjuvant chemotherapy strategies, and prediction of prognosis, with a general downward trend in surgical management. For early breast cancer with negative axillary lymph node metastases, sentinel lymph node biopsy (SLNB) has replaced axillary lymph node dissection (ALND) as the criterion for axillary status measurement. Patients can be exempted from ALND if they have negative SLNB results. However, it remains to be carefully decided in China whether patients with one or two positive nodes in SLNB can be spared from ALND. However, consensus has been met that patients who meet the criteria of the Z0011 study can be exempted from ALND. For breast cancer patients with positive axillary lymph nodes metastases at the beginning of treatment, the clearance of lymph node disease can be achieved by neoadjuvant therapy, with a reduced rate of complications related to ALND. In particular, there are still many debates associated with SLNB after neoadjuvant therapy, such as whether patients who remain axillary lymph node positive can be spared from ALND. Exploratory and validation studies related to the SLNB avoidance criteria are still controversial. In the future, clinicians should consider the characteristics of patients, the risk of recurrence, and adjuvant treatment regimens to develop individualized axillary lymph node management.

[A study on the application of intraoral camera in the identification of oral anatomical landmarks].

OBJECTIVE: To preliminarily explore the applicable scenarios of an intraoral camera to assist oral anatomical landmarks recognition, so as to improve the clinical diagnosis and treatment mode, cultivate the concept of caring for patients, strengthen doctor-patient communication, assist experts to teach, and improve the clinical diagnosis and efficacy rate. METHODS: A new type of an intraoral camera was applied in the recognition of oral anatomy landmarks and four application scenarios were developed, namely: (1) clinical diagnosis and treatment scenarios, in which doctors used intraoral camera to conduct a comprehensive examination of patients in the mouth and take videos and photos; (2) doctor-patient communication scenarios, when the doctor told the patient about the treatment plan, the video or photo taken by the intraoral camera was displayed to the patient; (3) expert teaching scenarios, when the expert used an intraoral camera to teach in the patient's mouth, and the young doctor learned oral anatomical signs on the projection screen, with the study of theoretical lessons; (4) difficult case recording scenarios, in the process of clinical diagnosis and treatment, when encountering difficult cases, you could use intraoral camera to record and take photos for young doctors to discuss, and experts to comment and guide. RESULTS: The application of intraoral camera could: (1) improve the clinical diagnosis and treatment mode and raise the clinical diagnosis and efficacy rate; (2) stimulate young doctors' interest in learning, use intraoral camera in assessments, and skillfully combine theoretical knowledge of anatomical landmarks with clinical practice, so as to improve the teaching effect; (3) cultivate, through self or mutual use, the concept of caring for patients and reinforce the importance of gentle operation; (4) strengthen doctor-patient communication. Doctors could communicate with patients more visually, so that the patients could better understand their own situation, and strengthen the patients' trust in the doctors. CONCLUSION: Intraoral camera can assist oral clinical diagnosis and treatment, such as the recognition of oral anatomical landmarks. It plays a certain role in promoting the improvement of clinical diagnosis and treatment mode, stimulating learning interest, cultivating the concept of caring for patients, and enhancing doctor-patient communication.

[Prediction, analysis and application of learning curve of tooth preparation for all ceramic crowns of maxillary central incisors].

OBJECTIVE: To predict the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training based on the modified Wright learning curve model, then to analyze and applicate the learning curve. METHODS: Twelve graduate students participating in standardized dental resident training were selected to prepare the resin maxillary central incisors on phantom head simulators for all ceramic crowns 4 times. The results of preparation were evaluated by 3 prosthetic experts with at least 10 years' experience focusing on the reduction, contour, taper, shoulder, finish line, margin placement, adjacent tooth injury, and preparation time for tooth preparation. The learning rate of tooth preparation was calculated by scores of tooth preparation of 4 times. The learning curve of tooth preparation was predicted based on the modified Wright learning curve model. According to the criteria of standardized training skill examinations for dental residents in Beijing, 80 was taken as the qualified standard score. The minimum training times for tooth preparation to satisfy the qualified standard score (80) was calculated, to analyze the characteristics of learning curve and evaluate the effectiveness of tooth preparation. RESULTS: The scores of 4 tooth preparation were 64.03±7.80, 71.40±6.13, 74.33±5.96, and 75.98±4.52, respectively. The learning rate was (106±4)%, which showed the learning curve an upward trend. There were no significant differences between the qualified standard score and the predicted scores of tooth preparation from the 5th preparation to the 13th preparation (P > 0.05). The predicted score of the 14th preparation was higher than the qualified standard score (P < 0.05). CONCLUSION: The trend of the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training is upward, which predicts the minimum training times higher than the qualified standard score is 14 times.

[Comparative analysis of clinical diagnosis application of two intrauterine adhesion scoring criteria].

Objective: To explore the similarities and differences of China Society of Gynecology Endoscopy (CSGE) and American Fertility Society (AFS) intrauterine adhesion (IUA) scoring criteria on IUA grading and their predictive value of reproductive prognosis. Methods: From January 2016 to January 2019, a total of 1 249 patients were diagnosed with IUA by hysteroscopy at Beijing Obstetrics and Gynecology Hospital. Totally, 378 patients with complete clinical data were enrolled, and the results diagnosed by CSGT and AFS scoring criteria were compared and analyzed.And follow-up for 2 years, the pregnancy rate and live birth rate were statistical analysis. Results: (1) The grade of IUA according to AFS and CSGE scoring criteria was less consistent (κ=0.295, P<0.001). Compared with AFS, the proportion of severe IUA cases diagnosed by CSGE was significantly lower [45.8% (173/378) vs 15.1% (57/378); RR=0.22, 95%CI: 0.15-0.30, P<0.01); the proportions of both mild and moderate IUA cases were significantly higher (RR=4.16, 95%CI: 2.38-7.14; RR=2.38, 95%CI: 1.75-3.23; both P<0.01). (2) The pregnancy rates of mild, moderate and severe IUA diagnosed according to CSGE were 11/13, 64.5% (147/228), 31.8% (7/22), live birth rates were 11/13, 54.8% (125/228) and 22.7% (5/22), respectively; there were statistically significant differences between the groups (all P<0.01). The pregnancy rates of mild, moderate and severe IUA diagnosed based on AFS were 3/3, 66.9% (97/145) and 56.5% (65/115), respectively, with no statistically significant difference between the groups (P>0.05). (3) IUA grades based on both CSGE and AFS criteria were significantly negatively correlated with pregnancy rates and live birth rates (CSGE: r=-0.210, r=-0.226; AFS: r=-0.130, r=-0.147; all P<0.05). Univariate logistic regression analysis showed that CSGE had higher OR for both pregnancy rates and live birth rates compared to AFS (3.889 vs 1.657, 3.983 vs 1.554, respectrvely). Conclusions: Compared with AFS, the IUA grade based on CSGE is better related with reproductive prognosis, suggesting that the CSGE standard might be more objective and comprehensive and has better predictive value for reproductive prognosis, thus avoiding overdiagnosis and overtreatment.

Evolution of superconductivity in K2-xFe4+ySe5: Spectroscopic studies of X-ray absorption and emission.

This study investigates the evolution of superconductivity in K2-xFe4+ySe5 using temperature-dependent X-ray absorption and resonant inelastic X-ray scattering techniques. Magnetization measurements show that polycrystalline superconducting (SC) K1.9Fe4.2Se5 has a critical temperature (T c) of ∼31 K with a varying superconducting volume fraction, which strongly depends on its synthesis temperature. An increase in Fe-structural/vacancy disorder in SC samples with more Fe atoms occupying vacant 4d sites is found to be closely related to the decrease in the spin magnetic moment of Fe. Moreover, the nearest-neighbor Fe-Se bond length in SC samples exceeds that in the non-SC (NS) sample, K2Fe4Se5, which indicates a weaker hybridization between the Fe 3d and Se 4p states in SC samples. These results clearly demonstrate the correlations among the local electronic and atomic structures and the magnetic properties of K2-xFe4+ySe5 superconductors, providing deeper insight into the electron pairing mechanisms of superconductivity.

[Preliminary clinical application verification of complete digital workflow of design lips symmetry reference plane based on posed smile].

OBJECTIVE: To automatically construct lips symmetry reference plane (SRP) based on posed smile, and to evaluate its advantages over conventional digital aesthetic design. METHODS: Eighteen subjects' three-dimensional facial and dentition data were gathered in this study. The lips SRP of experimental groups were used with the standard weighted Procrustes analysis (WPA) algorithm and iterative closest point (ICP), respectively. A reference plane defined by experts based on regional ICP algorithm, served as the truth plane. The angle error values between the lips SRP of WPA algorithm in the experimental groups and the truth plane were evaluated in this study, and the lips SRP of ICP algorithm of the experimental groups was calculated in the same way. The lips SRP based on posed smile as a reference for aesthetic design and evaluate preliminary clinical application. RESULTS: The average angle error between the lips SRP of WPA algorithm and the truth plane was 1.78°±1.24°, which was smaller than that between the lips SRP of ICP and the truth plane 7.41°±4.31°. There were significant differences in the angle errors among the groups (P < 0.05). In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile and the original symmetry plane by re-ference compared with the prosthetic design, the subjects' scores on the lips SRP of WPA algorithm based on posed smile (8.48±0.57) were higher than those on the original symmetry plane (5.20±1.31). CONCLUSION: Automatically constructing the lips SRP of WPA algorithm based on posed smile was more accurate than ICP algorithm, which was consistent with the truth plane. Moreover, it can provide an important reference for oral aesthetic diagnosis and aesthetic analysis of the restoration effect. In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile can improve the patients' satisfaction in esthetic rehabilitation.

[Long-term outcome follow-up of Oxford unicompartmental knee arthroplasty for medial compartment osteoarthropathy:a single center's experience for 10 years].

Objective: To investigate the long-term outcomes of minimally invasive Oxford phase Ⅲ unicompartmental knee arthroplasty (UKA) for patients with medial compartment osteoarthropathy. Methods: The clinical data of 594 patients (701 knees) who underwent minimally invasive UKA with Oxford phase Ⅲ unicompartmental prosthesis at Department of Orthopedics,the Affiliated Hospital of Qingdao University from January 2007 to January 2016 were retrospectively analyzed.There were 155 males and 439 females,aged (62.6±10.9) years (range: 44 to 81 years),with a body mass index of (26.9±3.8) kg/m2 (range: 21.1 to 36.2 kg/m2).There were 359 left knees and 342 right knees,676 knees with osteoarthritis and 25 knees with idiopathic osteonecrosis of the medial femoral condyle.There were 487 cases underwent UKA (66 cases underwent UKA on one side and total knee arthroplasty on the other) and 107 cases underwent bilateral UKA.Patients' prosthetic survival,complications,range of motion(ROM) of the knee,visual analogue score (VAS),Western Ontario and McMaster University (WOMAC) osteoarthritis index,and American knee society score (KSS) were collected to assess clinical outcomes.Paired sample t test was used to compare the data before and after operation. Results: All patients completed the surgery successfully.There was no intraoperative fractures,postoperative infections or symptomatic vascular embolic disease occurred.The postoperative complications,including mobile bearing dislocation,prosthesis loosening,tibial plateau collapse,the lateral compartment degeneration and postoperative pain were occurred in 18 cases (3.0%,18/594).Thirteen patients suffered complications were transferred to total knee arthroplasty,4 underwent partial revision,if this was used as the endpoint of the study,the surgical success rate was 97.1% (577/594) and the prosthetic revision rate was 2.9%.The ROM was improved from(105.9±11.8)°preoperatively to (114.0±13.3)° at the last follow-up (t=10.796,P<0.01);the KSS clinical score was increased from 54.3±3.6 to 90.1±6.0 (P<0.01) and the functional score was increased from 55.9±3.9 to 87.5±5.7(t=124.325,P<0.01;t=110.985,P<0.01).The WOMAC osteoarthritis index was decreased from 54.8±6.7 to 9.2±3.1 at the last follow-up(t=150.860,P<0.01) and the VAS was decreased from 6.1±1.1 to 1.5±1.0 at the last follow-up(t=74.941,P<0.01). Conclusions: Minimally invasive Oxford phase Ⅲ UKA for medial compartment knee osteoarthritis has a favorable prosthesis survival rate,low revision rate,and few complications at long-term follow-up.Patients have significant improvement in knee function with satisfactory clinical outcomes.

[Evaluation of methods for fitness of removable partial denture].

OBJECTIVE: To compare the differences and indications of three evaluation methods for fitness evaluation of removable partial denture (RPD). METHODS: A RPD was fabricated and seated on the stone cast of a partially edentulous mandible, and the spaces between RPD and stone cast were recorded with polyvinyl siloxane (PVS) impression material forming PVS replicas. Using cross sectional measurement, the average thicknesses of PVS replicas were measured under stereomicroscope with different numbers of selected measuring points in the denture base, major connector, occlusal rest of the RPD, and the average thicknesses of the PVS replicas measured with different numbers of measuring points were compared using one-way analysis of variance (ANOVA) and independent sample t test. Three kinds of method, including cross sectional measurement, three-dimensional analysis on the stone cast, and three-dimensional analysis on the polyether cast, were applied to measure the average thicknesses of the PVS replicas, and the average thicknesses of the PVS replicas measured by these three evaluation methods were compared with ANOVA. RESULTS: For cross sectional measurement, statistically significant differences were found in the average thicknesses of the PVS replicas in the denture base and the major connector among the different numbers of measuring points (P < 0.05), but no differences were found in the average thicknesses of the PVS replicas in the occlusal rest (P>0.05). There were significant differences among the average thicknesses of the PVS replicas measured by these three evaluation methods in each component of the RPD (P < 0.01). The average thickness measured by three-dimensional analysis on the stone cast and three-dimensional analysis on polyether cast were smaller than that measured by cross sectional measurement (P < 0.05). And there were no differences between the average thicknesses of PVS replicas measured by three-dimensional analysis on stone cast and three-dimensional analysis on polyether cast (P>0.05). CONCLUSION: For cross sectional measurement, the average thickness of the PVS replicas was influenced by the number of measuring points, and the measurement accuracy of cross sectional measurement was not reliable enough. Three-dimensional analysis on stone cast which is suitable for evaluation in vitro and three-dimensional analysis on polyether cast which is suitable for evaluation in vivo can evaluate the fitness of RPD more comprehensively and effectively than that of cross sectional measurement.

Altered resting-state functional connectivity between subregions in the thalamus and cortex in migraine without aura.

BACKGROUND AND PURPOSE: Migraine is a complex and disabling neurological disorder, the exact neurological mechanisms of which remain unclear. The thalamus is considered to be the hub of the central processing and integration of nociceptive information, as well as the modulation of these processes. METHODS: A total of 48 migraineurs without aura (MWoAs) during the interictal phase and 48 age- and sex-matched healthy controls underwent resting-state functional magnetic resonance imaging scans. We utilized masked independent component analysis and seed-based functional connectivity (FC) to investigate whether MWoAs exhibited abnormal FC between subregions in the thalamus and the cortex regions. RESULTS: The MWoAs showed significantly weaker FC between the anterior dorsal thalamic nucleus and left precuneus. Additionally, MWoAs exhibited significantly reduced FC between the ventral posterior nucleus (VPN) and left precuneus, right inferior parietal lobule (R-IPL) and right middle frontal gyrus. Furthermore, the FC Z-scores between the VPN and R-IPL were negatively correlated with pain intensity in MWoAs. The disease duration of patients was negatively correlated with the FC Z-scores between the VPN and R-IPL. CONCLUSION: These altered thalamocortical connectivity patterns may contribute to multisensory integration abnormalities, deficits in pain attention, cognitive evaluation and pain modulation. Pain sensitivity and disease duration are closely tied to abnormal FC between the VPN and R-IPL. Remarkably, recurrent headache attacks might contribute to this maladaptive functional plasticity closely related to pain intensity.

Glucose and lipid metabolism of broiler chickens fed diets with graded levels of corn resistant starch.

1. The aim of this study was to investigate the effects of graded levels of dietary corn resistant starch (RS) on glucose and lipid metabolism of broilers. 2. A total of 320 male broiler chicks (Arbor Acres, one-day-old) were randomly allocated to five dietary treatments, including a corn-soybean control diet, a corn-soybean based diet containing 20% corn starch, and three diets containing 4%, 8% and 12% RS by replacing corn starch with 6.67%, 13.33% and 20% Hi-Maize® 260 (identified as control, RS1, RS2, RS3 and RS4, respectively). Each treatment contained eight replicates with eight birds, and the experiment lasted 42 days. 3. Birds fed RS diets showed lower (P < 0.05) concentrations of serum low-density lipoprotein cholesterol and non-esterified fatty acid (NEFA) at d 21 and 42 of age, compared to the control. Lower (P < 0.05) hepatic apolipoprotein B concentration and citrate synthase (CS) activity, as well as a higher (P < 0.05) glycogen synthase (GS) concentration were observed in birds fed RS diets than those in the control group at d 21 of age. Consuming RS diets linearly increased (P < 0.01) serum glucose concentration, and linearly decreased (P < 0.01) NEFA concentrations in broilers at d 21 and 42 of age. Liver GS concentration and activities of hexokinase, pyruvate and CS were linearly increased (P < 0.01) in broilers at d 21 of age, but were linearly decreased (P < 0.05) in birds at d 42 of age in response to the increase of dietary RS levels. Feeding RS diets linearly decreased (P < 0.05) mRNA expressions of PC, PPARα and CPT-1 at d 21 of age and the mRNA expressions of SREBP-1 c, ChREBP, ACC and FAS at d 42 of age, and linearly increased (P < 0.05) the mRNA expressions of PEPCK, PC, LKB1, AMPKα1, PPARα, CPT-1 and L-FABP at d 42 of age. 4. Feeding broilers with diets containing higher concentration of RS promoted hepatic lipolysis and gluconeogenesis through activated AMPK signalling pathway and accelerated whole-body energy expenditures in the grower phase.

Growth performance, carcass traits and digestive function of broiler chickens fed diets with graded levels of corn resistant starch.

1. This study was conducted to assess the effects of graded levels of dietary corn resistant starch (RS) on growth performance, carcass traits, nutrient retention, digestive organ index, intestinal morphology, digestive enzyme activities, and mRNA expression of certain nutrient transporters in broiler chickens.2. A total of 320, 1-d-old Arbor Acres broiler chickens were randomly assigned to five dietary treatments, with eight replicates of eight birds in each. These treatments included one corn-soybean control diet, a corn-soybean based diet containing 20% corn starch, and three diets supplemented with 4%, 8% and 12% RS by replacing corn starch with 6.67%, 13.33% and 20% of Hi-Maize 260® (identified as control, RS1, RS2, RS3 and RS4, respectively). The feeding period lasted 42 days.3. Performance parameters including feed consumption, feed conversion, body weight gain and percentage of abdominal fat at d 42 of age, nutrient retention (including dry matter, fat, total starch and nitrogen free extract), and apparent metabolisable energy was measured from d 18 to 20 and d 39 to 41 and showed negative linear responses to increasing dietary RS level (P < 0.05). Birds fed the RS3 and RS4 diets showed higher relative weight of duodenum, jejunum and ileum, as well as lower villus height and villus height/crypt depth compared to the control (P < 0.05). The activity of pancreatic trypsin of birds at d 21 and 42 of age decreased linearly in response to the increase of dietary RS level (P < 0.01). There were linear changes in up-regulated mRNA expression of SGLT-1 and down-regulated mRNA expression of GLUT-2 with increasing proportion of RS at d 21 and 42 of age (P < 0.05), respectively.4. It was concluded that feeding broilers with diets containing higher concentrations of RS impaired the development of small intestine, which resulted in lower apparent total tract retention of nutrients and poorer body weight gain, feed efficiency and carcass traits of broiler chickens.

Prevalence and molecular characterization of Spirometra erinaceieuropaei spargana in snakes in Hunan Province, China.

Sparganosis is an important foodborne parasitic zoonosis; however, few reports on the prevalence of snake-infecting plerocercoids from Hunan province in China are available. Therefore, we investigated the prevalence of spargana infection in wild snakes from this region in 2018, and identified an astonishing prevalence rate of 91.7% (344/375). Spargana parasites were found in 99.1% of Zaocys dhumnades, 94.1% of Elaphe carinata and 86.7% of Elaphe taeniura. Parasites exhibited various distributions: 50% were located in muscular tissue, 32.1% in subcutaneous tissue and 17.9% in the coelomic cavity. To identify the specific status of spargana collected from wild snakes, partial mitochondrial cytochrome c oxidase subunit 1 (cox1) gene sequences were amplified, sequenced and analysed. Sequence variations for cox1 among all the examined plerocercoids ranged between 0.0 and 2.9%, with 21 variable sites identified (4.71%, 21/446). Phylogenetic analyses identified that all plerocercoids isolated from Hunan province were Spirometra erinaceieuropaei. This is the first report of S. erinaceieuropaei infection in snakes in Hunan province. The risks and harms of sparganosis should be publicized, and illegal wildlife trade should be controlled.

[Application of biocopy function of temporary crown occlusal morphology in patients with severe attrition].

OBJECTIVE: To explore the preliminary application of "biocopy function" in digital technology of temporary crown in severe tooth attrition, so as to reduce the difficulty of final restoration adjustment in severe tooth wear cases, and save clinical time. METHODS: Twelve patients aged between 40 and 65 years with severe tooth attrition were recruited in this study. The experimental group (6 cases, 3 females and 3 males) used the method of digital copy of temporary restoration shape when making the final restoration, and the control group (6 cases, 3 females and 3 males) used the traditional method to make the final restoration. The mean time of central occlusal adjustment and protrusive and lateral occlusal adjustment of each crown, the number of follow-up visits of the patients were recorded and statistically analyzed. The occlusal comfort of the first and the third months after wearing the prosthesis was evaluated by the patients, and the difference of the occlusal comfort of the final prosthesis made by the two methods was compared (the full score was 10 points). The occlusal adjustment time and occlusal comfort score were used as measurement data. Single sample t test was used. The number of follow-up visits was count data. Rank sum test was used for non-normal continuous variables. RESULTS: The mean occlusal time of each crown adjustment in the experimental group was significantly lower than that in the control group (P < 0.01), and the median number of follow-up visits in the experimental group was lower than that in the control group (P < 0.01). The average occlusal comfort score of the experimental group was higher than that of the control group at the first time (P < 0.01). After three months of crown wearing, the median occlusal comfort score of the experimental group was higher than that of the control group (P < 0.05). CONCLUSION: In the case of severe tooth attrition, it is feasible to use the "biocopy function" in the design software to design the final prosthesis, which is conducive to reduce the difficulty of adjustment and achieve predictable functional and aesthetic effects, which is of great significance to save clinical time and improve the accuracy of restoration.

[Application and exploration of Smile Lite MDP portable photography system in aesthetic photography of anterior teeth].

OBJECTIVE: To explore the possibility of the Smile Lite MDP (Smile Lite Mobile Dental Photograph) portable dental photography system applying in anterior teeth aesthetic photography, and to provide the chance to simplify aesthetic photography process and facilitate communication among patients, dentists and dental technitians. METHODS: The Smile Lite MDP photography system combined with the smartphone were used to photograph the front occlusal phase photos of anterior teeth. The photographic conditions including the color temperature parameter, the Smile Lite MDP light position and the intensity settings were explored. The best photographic conditions were chosen by blind evaluation within experienced dentists and technicians through the method of the visual analogue scale/score (VAS) evaluation, which went through statistical analysis to figure out the optimum photograghic conditions. Smile Lite MDP photography system was used to photograph the front occlusal phase photos of anterior teeth under the optimum parameter by different magnifications. The width/height ratio of the central incisor and the front width ratio of the upper anterior teeth in those photos were measured and calculated respectively. The accuracy of the anterior teeth photos taken by Smile Lite MDP photography system was analyzed based on the photographs taken by digital single lens reflex (DSLR) camera. RESULTS: The optimum color temperature parameter of Smile Lite MDP portable camera system was 5 000 K, the optimum magnification was 4 times, the best light position was the side lights of Smile Lite MDP, the optimum intensity of lights was 2 grades. Photos taken by the optimum parameters won the highest score during the VAS evaluation and the result of statistical analysis had significant difference compared with other groups (P<0.05). When comparing the photos of the upper anterior teeth taken by the Smile Lite MDP portable photography system using 4 times magnification or by DSLR using the standard parameters, there was no significant difference neither in the width/hieght ratio of the central incisor nor in the front width ratio of the upper anterior teeth (P>0.05). CONCLUSION: The Smile Lite MDP portable dental photography system applying in anterior teeth aesthetic analysis photography was capable to show the color and shape of anterior teeth in an accurate way by using the right photography parameters. Therefore, Smile Lite MDP portable dental photography system was considered to be a simple and easy photographic tool in clinical work.

[Airway parameters and reference value range of high-resolution CT reconstruction in general population].

Objective: To investigate the measurement of small airways by high-resolution CT and image post-processing software. Screen and analyze the reconstructed airway parameters in order to find the best imaging biomarker parameters of small airway changes and calculate the reference value range; meanwhile, explore its influencing factors. Methods: From a water plant and a medical school, 169 cases of the general population aged 20 to 60 were selected as research objects, and questionnaire surveys and CT tests were performed, and CT data were reconstructed with image post-processing software. The reference value range of the general population was evaluated, and a linear mixed effect model was used to adjust the age, gender, height, BMI, and smoking status, and analyze the influencing factors of airway parameters. Results: The ratio of sixth-grade tracheal wall area to total tracheal area in the Left B1+2 to carina was (53.01±13.35) %, Left B9 to carina was (50.44±12.98) %, Right B1 to carina was (52.73±12.22) %, and Right B9 to carina was (52.93±11.85) %. The ratio of nineth-grade tracheal wall area to total tracheal area in the Left B1+2 to carina was (44.08±14.66) %, Left B9 to carina was (42.44±15.89) %, Right B1 to carina was (46.51±14.03) %, and Right B9 to carina is (43.54±15.87) %. BMI affect the area of the tracheal wall, all p value<0.05. Conclusion: High-resolution CT small airway morphology can make a preliminary assessment of the susceptible population of small airway-related diseases based on a range of reference values, and prevent and control it in combination with influencing factors.

Time-to-progression following conventional compared with drug-eluting-bead transcatheter arterial chemoembolisation in patients with large hepatocellular carcinoma.

AIMS: To identify the optimal transarterial chemoembolisation (TACE) approach in patients with large hepatocellular carcinoma (HCC; >5 cm) by comparing conventional TACE (cTACE) and drug-eluting-bead (DEB)-TACE. MATERIALS AND METHODS: This retrospective study included 63 consecutive HCC patients who received TACE at a single medical centre from September 2009 to October 2015. Primary endpoints were 3-year overall survival (OS) rate and time-to-progression (TTP). Hazard ratios (HRs) from Kaplan-Meier curves were calculated to compare survival estimates. RESULTS: The median OS was shorter in the cTACE group, but was not significantly different from the DEB-TACE group (33.9 versus 35.6 months, respectively; p=0.52). The mean TTP was shorter in the cTACE group than in the DEB-TACE group (13.9 versus 17.5 months, respectively; p=0.01). There was no difference in 3-year survival (HR=0.95, 95% confidence interval [CI]: 0.51-1.78; p=0.880) and TTP (HR=0.70, 95% CI: 0.42-1.16; p=0.147) between the groups; however, patients treated with DEB-TACE were more likely to have longer TTP in the first 2 years following treatment (HR=0.51, 95% CI: 0.29-0.88; p=0.009). CONCLUSION: Although DEB-TACE is not superior in terms of TTP or OS in patients with large HCC, it may have greater efficacy in the first 24 months following therapy.

[Evaluation of one-piece polyetheretherketone removable partial denture fabricated by computer-aided design and computer-aided manufacturing].

OBJECTIVE: To explore a novel method for fabricating removable partial dentures (RPDs) using polyetheretherketone (PEEK) by computer-aided design and computer-aided manufacturing (CAD/CAM) technologies and to evaluate their fits for different assemblies in vitro. METHODS: A standard stone cast of mandibular partial edentulous jaw was scanned using a lab scanner. Based on the digital cast, thirteen complete RPDs were designed combing dental CAD software and reverse engineering software, and then fabricated using PEEK by milling machine. Fits of assemblies were evaluated quantitatively by measuring the spaces between RPDs and casts. The gaps between RPDs and stone casts in different assemblies were duplicated using light-body silicone impression material and then measured using three-dimensional (3D) digital analysis methods in virtue of a dedicated software. Statistically, one-way analysis of variance (ANOVA) was used to compare the difference of gaps among assemblies in different shapes such as occlusal rest, denture base, and major connector. Paired-samples t test was used to compare the gaps difference for the similar shape assemblies in different areas. RESULTS: One-piece PEEK RPDs were successfully designed and fabricated by CAD/CAM, and all the RPDs were well-seated on stone casts. The gaps between occlusal rests and casts [(84.3±23.6) µm] were significantly larger than those of denture bases [(32.5±27.8) µm] and major connectors [(49.9±47.0) µm], which meant that the fits of denture bases and major connectors were better than that of occlusal rests. However, the fits of all assemblies could be accepted clinically. For the similar shape assemblies in different areas, there were no significantly differences for gaps between distal extension denture bases [(25.1±55.3) µm] and non-extensive denture bases [(41.5±17.7) µm]. The gaps of occlusal rests adjacent and nonadjacent to the edentulous space were (86.1±29.8) µm and (80.8±42.1) µm respectively and there were no significantly difference between them either. These results implied that different locations had no apparent effect on the fits of assemblies. CONCLUSION: With the computer-aided design and computer-aided manufacturing technology, PEEK can be used to fabricate one-piece removable partial dentures. And all assemblies of the one-piece PEEK RPDs showed satisfying fits in vitro, indicating a promising clinical application in the future.

[Establishment of a 3D printing system for bone tissue engineering scaffold fabrication and the evaluation of its controllability over macro and micro structure precision].

OBJECTIVE: To establish a 3D printing system for bone tissue engineering scaffold fabrication based on the principle of fused deposition modeling, and to evaluate the controllability over macro and micro structure precision of polylactide (PLA) and polycaprolactone (PCL) scaffolds. METHODS: The system was composed of the elements mixture-I bioprinter and its supporting slicing software which generated printing control code in the G code file format. With a diameter of 0.3 mm, the nozzle of the bioprinter was controlled by a triaxial stepper motor and extruded melting material. In this study, a 10 mm×10 mm×2 mm cuboid CAD model was designed in the image ware software and saved as STL file. The file was imported into the slicing software and the internal structure was designed in a pattern of cuboid pore uniform distribution, with a layer thickness of 0.2 mm. Then the data were exported as Gcode file and ready for printing. Both polylactic acid (PLA) and polycaprolactone (PCL) filaments were used to print the cuboid parts and each material was printed 10 times repeatedly. After natural cooling, the PLA and PCL scaffolds were removed from the platform and the macro dimensions of each one were measured using a vernier caliper. Three scaffolds of each material were randomly selected and scanned by a 3D measurement laser microscope. Measurements of thediameter of struts and the size of pores both in the interlayer overlapping area and non-interlayer overlapping area were taken. RESULTS: The pores in the printed PLA and PCL scaffolds were regular and interconnected. The printed PLA scaffolds were 9.950 (0.020) mm long, 9.950 (0.003) mm wide and 1.970 (0.023) mm high, while the PCL scaffolds were 9.845 (0.025) mm long, 9.845 (0.045) mm wide and 1.950 (0.043) mm high. The struts of both the PLA and PCL parts became wider inthe interlayer overlapping area, and the former was more obvious. The difference between the designed size and the printed size was greatest in the pore size of the PLA scaffolds in interlayer overlapping area [(274.09 ± 8.35) µm)], which was 26.91 µm. However, it satisfied the requirements for research application. CONCLUSION: The self-established 3D printing system for bone tissue engineering scaffold can be used to print PLA and PCL porous scaffolds. The controllability of this system over macro and micro structure can meet the precision requirements for research application.