Boosting Reactive Oxygen Species Formation Over Pd and VOδ Co-Modified TiO2 for Methane Oxidation into Valuable Oxygenates.

Direct photocatalytic methane oxidation into value-added products provides a promising strategy for methane utilization. However, the inefficient generation of reactive oxygen species (ROS) partly limits the activation of CH4. Herein, it is reported that Pd and VOδ co-modified TiO2 enables direct and selective methane oxidation into liquid oxygenates in the presence of O2 and H2. Due to the extra ROS production from the in situ formed H2O2, a highly improved yield rate of 5014 µmol g-1 h-1 for liquid oxygenates with a selectivity of 89.3% is achieved over the optimized Pd0.5V0.2-TiO2 catalyst at ambient temperature, which is much better than those (2682 µmol g-1 h-1, 77.8%) without H2. Detailed investigations also demonstrate the synergistic effect between Pd and VOδ species for enhancing the charge carrier separation and transfer, as well as improving the catalytic activity for O2 reduction and H2O2 production.

Is robotic-assisted vaginectomy a better choice in vaginal high-grade squamous intraepithelial lesions than conventional laparoscopic surgery?

BACKGROUND: Vaginectomy has been shown to be effective for select patients with vaginal high-grade squamous intraepithelial lesions (HSIL) and is favored by gynecologists, while there are few reports on the robotic-assisted laparoscopic vaginectomy (RALV). The aim of this study was to evaluate the safety and treatment outcomes between RALV and the conventional laparoscopic vaginectomy (CLV) for patients with vaginal HSIL. METHODS: This retrospective cohort study was conducted in 109 patients with vaginal HSIL who underwent either RALV (RALV group) or CLV (CLV group) from December 2013 to May 2022. The operative data, homogeneous HPV infection regression rate and vaginal HSIL regression rate were compared between the two groups. Student's t-test, the Mann-Whitney U test, Pearson χ2 test or the Fisher exact test, Kaplan-Meier survival analysis and Cox proportional-hazards models were used for data analysis. RESULTS: There were 32 patients in the RALV group and 77 patients in the CLV group. Compared with the CLV group, patients in the RALV group demonstrated less estimated blood loss (41.6 ± 40.3 mL vs. 68.1 ± 56.4 mL, P = 0.017), lower intraoperative complications rate (6.3% vs. 24.7%, P = 0.026), and shorter flatus passing time (2.0 (1.0-2.0) vs. 2.0 (2.0-2.0), P < 0.001), postoperative catheterization time (2.0 (2.0-3.0) vs. 4.0 (2.0-6.0), P = 0.001) and postoperative hospitalization time (4.0 (4.0-5.0) vs. 5.0 (4.0-6.0), P = 0.020). In addition, the treatment outcomes showed that both RALV group and CLV group had high homogeneous HPV infection regression rate (90.0% vs. 92.0%, P > 0.999) and vaginal HSIL regression rate (96.7% vs. 94.7%, P = 0.805) after vaginectomy. However, the RALV group had significantly higher hospital costs than that in the CLV group (53035.1 ± 9539.0 yuan vs. 32706.8 ± 6659.2 yuan, P < 0.001). CONCLUSIONS: Both RALV and CLV can achieve satisfactory treatment outcomes, while RALV has the advantages of less intraoperative blood loss, fewer intraoperative complications rate and faster postoperative recovery. Robotic-assisted surgery has the potential to become a better choice for vaginectomy in patients with vaginal HSIL without regard to the burden of hospital costs.

Comparison of clinical outcomes and second-look hysteroscopy of the complete and incomplete septate uterus after hysteroscopic septoplasty.

PURPOSE: Septate uterus is the most common congenital uterine malformation. This retrospective cohort study compared clinical outcomes and second-look hysteroscopy findings in patients with complete and incomplete septate uteri after septoplasty. METHODS: We reviewed the medical records of patients with a septate uterus who underwent hysteroscopic septoplasty and second-look hysteroscopy at the West China Second University Hospital between September 2013 and September 2021. Information regarding pregnancy outcomes was collected through telephone interviews. The independent samples t-test, Mann-Whitney U test, Pearson's chi-square test, and Fisher's exact test were used to explore the differences between the complete and incomplete septate uterus groups. RESULTS: A total of 64 patients were enrolled in this study. There was no significant difference in intrauterine adhesion (IUA) rates (16.7% and 32.1%), pregnancy rates (44.1% and 42.9%), term delivery rates (35.3% and 32.1%), premature delivery rates (2.9% and 0), placenta previa rates (2.9% and 3.6%), placenta implantation/adhesion rates (5.9% and 3.6%), and premature rupture of membranes rates (2.9% and 0) between the complete and the incomplete group after hysteroscopic septoplasty (P > 0.05). Endometrial polyps in the septate uterus were common, with an incidence of 33.3% and 25% in the complete and incomplete groups, respectively (P > 0.05). CONCLUSION: The pregnancy outcomes of complete and incomplete septate uteri after hysteroscopic septoplasty were similar. There was no statistical difference in IUAs after surgery. Different treatment strategies may not be required for complete or incomplete septate uteri.

DNA Origami-Based Letterpress Printing of Gold Nanostructures with Predesigned Morphologies.

Creating customizable metallic nanostructures in a simple and controllable manner has been a long-standing goal in nanoscience. In this study, we use DNA origami as a letterpress printing plate and gold nanoparticles as ink to produce predesigned gold nanostructures. The letterpress plate is reusable, enabling the repetitive production of predesigned gold nanostructures. Furthermore, by modifying the DNA origami letterpress plate on magnetic beads, we can simplify the printing processes. We have successfully printed gold nanoparticle dimers, trimers, straight and quadrilateral tetramers, and other nanostructures. Our approach improves the flexibility and stability of metallic nanostructures, simplifying both their design and their operation. It promises universal applicability in the fabrication of metamaterials, biosensors, and surface plasma nanooptics.

Boosting the Electrocatalytic Oxygen Evolution of Perovskite LaCo1- x Fex O3 by the Construction of Yolk-Shell Nanostructures and Electronic Modulation.

Realizing the rational design of perovskite oxides with controllable compositions and nanostructures remains a tremendous challenge for the development of efficient electrocatalysts. Herein, a ligand-assisted synthetic strategy to fabricate perovskite oxides LaCo1- x Fex O3 with yolk-shell nanostructures is developed. Benefiting from the unique structural and compositional merits, LaCo0.75 Fe0.25 O3 exhibits an overpotential of 310 mV at a current density of 10 mA cm-2 and long-term stability of 100 h for the oxygen evolution reaction. In situ Raman spectroscopy demonstrates that Fe substitution facilitates the pre-oxidation of Co sites and induces the surface reconstruction into active Co oxyhydroxides at a relatively lower applied potential, guaranteeing excellent catalytic performances. Density functional theory calculations unravel that the appropriate introduction of Fe into perovskite LaCoO3 leads to the improved electroactivity and durability of the catalyst for the oxygen evolution reaction (OER). Fe-3d orbitals show a pinning effect on Co-3d orbitals to maintain the stable valence state of Co sites at the low overpotential of the OER. Furthermore, Zn-air batteries (ZABs) assembled with LaCo0.75 Fe0.25 O3 display a high open circuit potential of 1.47 V, superior energy density of 905 Wh kg-1  Zn , and excellent stability in a large temperature range. This work supplies novel insights into the future developments of perovskite-based electrocatalysts.

Zinc Finger Protein LipR Represses Docosahexaenoic Acid and Lipid Biosynthesis in Schizochytrium sp.

The heterotrophic marine microalgae Schizochytrium sp. is an important industrial producer of docosahexaenoic acid (DHA). Increased production of DHA and lipids in Schizochytrium sp. has been achieved by standard fermentation optimization and metabolic engineering methods; however, regulatory mechanisms for DHA and lipid biosynthesis remain unknown. In this study, the C2H2 zinc finger protein LipR was identified in Schizochytrium sp. ATCC 20888 by transcriptional analysis. Deletion of the lipR gene significantly (P < 0.001) increased production of total lipids and DHA by 33% and 48%, respectively. LipR repressed DHA and lipid production by directly inhibiting transcription of polyunsaturated fatty acid (PUFA) and fatty acid synthase (FAS) genes (pfa1, pfa2, pfa3, and fas). Specific binding of LipR to 9-bp recognition sequence 5'-(C/A)(A/G)CCATCTT-3' in upstream regions of target genes was demonstrated by electrophoretic mobility shift assays (EMSAs) and DNase I footprinting assays. Expression of several key genes (acc, acl, ampD, fabD, mae, zwf, and dga1) related to levels of precursors and NADPH, and to triacylglycerol storage rate, were also directly repressed by LipR. Our findings, taken together, indicate that the evolutionarily unique regulator LipR is an essential repressor of DHA and saturated fatty acid biosynthesis in Schizochytrium sp. IMPORTANCE Regulatory mechanisms for DHA and saturated fatty acid biosynthesis in the heterotrophic marine microalgae Schizochytrium sp. are unclear. We demonstrate here that deletion of the gene (lipR) encoding the C2H2 zinc finger protein LipR promotes DHA and saturated fatty acid production in this genus. LipR acts as a key repressor of such production by binding to 9-bp consensus sequence 5'-(C/A)(A/G)CCATCTT-3' in the upstream regions of polyunsaturated fatty acid and fatty acid synthase genes (pfa1, pfa2, pfa3, and fas), and genes related to levels of precursors and NADPH (acc, acl, ampD, fabD, mae, and zwf), and to triacylglycerol storage rate (dga1). This is the first demonstration that a regulator inhibits synthesis of DHA and lipids in Schizochytrium sp. by directly controlling transcription of PUFA synthase and fas genes. Manipulation of the lipR gene provides a potential strategy for enhancing accumulation of polyunsaturated fatty acids and lipids in thraustochytrids.

Infection status and survival impact of high-risk human papillomavirus in cervical adenocarcinomas: A systematic review and meta-analysis.

OBJECTIVE: Cervical adenocarcinoma (CAC) comprises a heterogeneous group of tumors that are not universally associated with HPV infection. As has been shown in other organs, it is becoming increasingly apparent that HPV status significantly affects the prognosis of adenocarcinoma. We conducted a systematic review and meta-analysis to investigate the infection status of high-risk Human papillomavirus (hrHPV) in CAC and evaluate its impact on the survival of patients. METHODS: PubMed, Embase, Cochrane Central Register of Controlled Trials (CENTRAL), International Clinical Trials Registry Platform (ICTRP), and Clinical Trials.gov were searched from inception to May 1st, 2022. Data on HPV infection status and survival outcomes were evaluated using STATA 16.0. RESULTS: Seventy-one studies with 11,278 participants were included in HPV infection analysis and eight studies with 1099 participants were included in prognosis analysis. The HPV infection rate (including high-risk and low-risk) and hrHPV infection rate in CAC were 75% (95% CI 0.70-0.80, 6978 participants) and 75% (95% CI 0.70-0.81, 4906 participants), respectively. HPV-16 and -18 were the most common HPVs in CAC, with pooled infection rates of 37% (95% CI 0.33-0.41, 7848 participants) and 34% (95% CI 0.30-0.38, 7730 participants), respectively. hrHPV infection was associated with better overall survival (HR 0.23, 95% CI 0.11-0.47, 1013 participants), better disease-free survival (HR 0.18, 95% CI 0.07-0.43, 292 participants), better progression-free survival (HR 0.20, 95% CI 0.08-0.47, 271 participants) and less recurrence (RR 0.30, 95% CI 0.07-0.43, 181 participants). CONCLUSION: HPV infection rates were high in CAC. HPV-16 and -18 had the highest infection rates in CAC. However, hrHPV infection was associated with better survival and less recurrence. Future studies should clarify the relationship between hrHPV infection and other prognostic factors and make reasonable treatment strategies for CAC with different HPV status. PROTOCOL REGISTRATION: CRD42022319390.

Vacancy-Mediated Hydrogen Spillover Improving Hydrogen Storage Properties and Air Stability of Metal Hydrides.

Hydrogen storage in metal hydrides is a promising solution for sustainable and clean energy carriers. Although Mg-based metal hydrides are considered as potential hydrogen storage media, severe surface passivation has limited their industrial application. In this study, a simple, cheap, and efficient method is proposed to produce highly reactive and air-stable bulk Mg-Ni-based hydrides by rapid treatment with water for 3 min. The nickel-decorated Mg(OH)2 nanosheets formed in situ during hydrolysis can provide a pathway for hydrogen desorption via vacancy-mediated hydrogen spillover, as revealed by density functional theory calculations, thereby significantly decreasing the peak dehydrogenation temperature by 108.2 °C. Moreover, water-activated hydrides can be stored under ambient conditions without surface decay and activity loss, exhibiting excellent air stability, which can be attributed to the chemical stability of the surface layer. The results provide alternative insights into the design of highly active, air-stable metal hydrides with low cost and promote the industrial application of hydrogen energy.

Catalytic effect of sandwich-like Ti3C2/TiO2(A)-C on hydrogen storage performance of MgH2.

A sandwich-like Ti3C2/TiO2(A)-C prepared through a facile gas-solid method was doped into MgH2 by ball milling. Ti3C2/TiO2(A)-C shows a far superior catalytic effect on the hydrogen storage of MgH2 than individual Ti3C2 or TiO2(A)-C, assigning as a synergistic catalysis between Ti3C2 and TiO2(A)-C. For example, the peak dehydrogenation temperature of MgH2-5 wt% Ti3C2/TiO2(A)-C is reduced to 308 °C, much lower than that of MgH2-5 wt% Ti3C2 (340 °C) or MgH2-5 wt% TiO2(A)-C (356 °C). After dehydrogenation, the dehydrogenated MgH2-5 wt% Ti3C2/TiO2(A)-C can uptake approximately 4 wt% of hydrogen within 800 s at 125 °C, while for the dehydrogenated MgH2-5 wt% Ti3C2 and MgH2-5 wt% TiO2(A)-C, only 3 wt% and 2.65 wt% hydrogen content can be obtained, respectively. Besides this, MgH2-5 wt% Ti3C2/TiO2(A)-C exhibits the lowest apparent activation energies (42.32 kJ mol-1 H2 for the hydrogen absorption and 77.69 kJ mol-1 H2 for the hydrogen desorption), which can explain the excellent hydrogen ab/desorption kinetic properties. The synergetic effects between the special layered structure and multiple valence titanium compounds (Ti4+, Ti3+, Ti2+, Ti0) verified by the x-ray photoelectron spectroscopy results are responsible for the catalytic mechanism on the hydrogen storage of MgH2. This study also supplies innovative insights into designing high efficiency MXene derivative catalysts in hydrogen storage.

[A Case of Acute Aortic Dissection Following Intrapartum in a Patient with Marfan ' s Syndrome].

A 33-year-old woman was admitted at 34 +4 weeks after embryo transfer and over 5 d of cutaneous pruritus. Over 2 years ago, the patient had a third-generation test tube baby due to Marfan's syndrome and gave birth to a live baby girl at full term. This time, the glucose tolerance test during the prenatal examination indicated that the patient was with gestational diabetes, and the blood glucose fluctuated within the normal range after the medical nutrition management and exercise control. The heart ultrasound examination during pregnancy showed that the aortic sinus was enlarged to 40 mm, and the left ventricular systolic function was normal. The patient was diagnosed as "intrahepatic cholestasis of pregnancy (mild)". After admission, the gestational age was verified to be 37 +2 weeks according to the time of embryo transfer, and the diagnostic result was modified to be intrahepatic cholestasis of pregnancy (severe). During the test, the patient complainted back pain, which might interpreted as a sign of aortic dissection. Cesarean section was carried out under multidisciplinary cooperation, during which the amount of bleeding was 600 mL, bilateral uterine artery ligation was performed and a live baby boy was delivered. The body mass of the baby was 3 020 g, and the Apgar scores (1-5-10 min after delivery) were 10-10-10. The postoperative CT angiography showed aortic dissection (Type B). It was found in the follow-up that the patient had no discomforts such as chest tightness and shortness of breath, and recovered well after the delivery.

A microbiological inhibition method for the rapid, broad-spectrum, and high-throughput screening of 34 antibiotic residues in milk.

In this study, we developed a microbiological inhibition method for the rapid screening of antibiotics in milk with Geobacillus stearothermophilus ATCC12980 as an indicator bacterium and an easy sample pretreatment. We observed that the limits of detection of the kit for 34 common antibiotic residues in milk, including ß-lactams (13), aminoglycosides (6), tetracyclines (4), sulfonamides (6), macrolides (4), lincosamides (1), were lower than or close to the maximum residue limits formulated by the European Union and China. Moreover, the false-positive rate was 1% and the false-negative rates were less than 5%. The ruggedness of the method (the reproducibility of detection capability of different batches of medium) met requirements at determined levels and residual limits. The shelf life of the kit was more than 6 mo at 4°C. Additionally, we observed good correlations between the kit results and ultra-high-performance liquid chromatography-tandem mass spectrometry results for incurred milk (samples taken from animals treated with antibiotics according to the pre-slaughter medication data), which indicated that the kit was reliable for screening antibiotics in incurred samples. In conclusion, the kit has a broad application potential with high sensitivity, specificity, and reproducibility, stability, and reliability, combined with simple operation, low cost, and high-throughput capacity.

[Pattern recognition of decorative papers with different visual characteristics using visible spectroscopy coupled with principal component analysis (PCA)].

As one of the most important decorative materials for the modern household products, decorative papers impregnated with melamine not only have better decorative performance, but also could greatly improve the surface properties of materials. However, the appearance quality (such as color-difference evaluation and control) of decorative papers, as an important index for the surface quality of decorative paper, has been a puzzle for manufacturers and consumers. Nowadays, human eye is used to discriminate whether there exist color difference in the factory, which is not only of low efficiency but also prone to bring subjective error. Thus, it is of great significance to find an effective method in order to realize the fast recognition and classification of the decorative papers. In the present study, the visible spectroscopy coupled with principal component analysis (PCA) was used for the pattern recognition of decorative papers with different visual characteristics to investigate the feasibility of visible spectroscopy to rapidly recognize the types of decorative papers. The results showed that the correlation between visible spectroscopy and visual characteristics (L*, a* and b*) was significant, and the correlation coefficients wereup to 0.85 and some was even more than 0. 99, which might suggest that the visible spectroscopy reflected some information about visual characteristics on the surface of decorative papers. When using the visible spectroscopy coupled with PCA to recognize the types of decorative papers, the accuracy reached 94%-100%, which might suggest that the visible spectroscopy was a very potential new method for the rapid, objective and accurate recognition of decorative papers with different visual characteristics.

[Study of rapid prediction of wood surface glossiness by near infrared spectroscopy].

Surface glossiness is one of the important visual appearance parameters of natural polymer material (wood) and its related products. To realize the fast measurement of natural polymer material surface glossiness is of great significance to the online quality control and assessment of its surface. In order to broaden the application of near infrared (NIR) spectroscopy in the field of polymer material surface quality control and realize the feasibility of NIR as a fast measurement of surface glossiness, the NIR combined with partial least squares (PLS) analysis were used to analyse the correlations of natural polymer material wood surface glossiness between the NIR predicted and lab measured, and then to investigate the feasibility of NIR to rapidly predict the surface glossiness of natural polymer material wood. The results showed that the wood NIR diffuse reflectance spectroscopy regularly varied with the different wood surface glossiness, from which we can concluded that the NIR spectrums reflected the information of wood surface glossiness. The correlation coefficients of surface glossiness between the PLS models predicted and lab measured were up to 0.90. Additionally, by changing the degree between the fiber and sample surface, we collected the different wood NIR spectrums, the accuracy of NIR surface glossiness models based on these NIR spectrums had not significantly improved, and models based on the NIR spectrums collected by the 90 degree between the fiber and sample surface performed better.

bZIP transcription factor FabR: Redox-dependent mechanism controlling docosahexaenoic acid biosynthesis and H2O2 stress response in Schizochytrium sp.

Schizochytrium sp. is an important industrial strain for commercial production of docosahexaenoic acid (DHA), which plays essential physiological roles in infant development and human health. The regulatory network for DHA biosynthesis and lipid accumulation in Schizochytrium remains poorly understood. FabR (fatty acid biosynthesis repressor), a basic leucine zipper (bZIP) transcription factor, was transcriptionally downregulated under low-nitrogen condition. Deletion of fabR gene (mutant ΔfabR) increased production of total lipids and DHA by 30.1% and 46.5%, respectively. ΔfabR displayed H2O2 stress resistance higher than that of parental strain or complementation strain CfabR. FabR bound specifically to 7-bp pseudo-palindromic sequence 5'-ATTSAAT-3' in upstream regions and repressed transcription of fatty acid biosynthesis genes (acl, fas, pfa) and antioxidant defense genes (cat, sod1, sod2, gpx). DNA binding activity of FabR was regulated in a redox-dependent manner. Under oxidative condition, FabR forms intermolecular disulfide bonds between two Cys46 residues of dimers; its DNA binding activity is thereby lost, and the transcription of its target genes is enhanced through derepression. Our findings clarify the redox-dependent mechanism that modulates FabR activity governing lipid and DHA biosynthesis and H2O2 stress response in Schizochytrium.

Selectively superior production of docosahexaenoic acid in Schizochytrium sp. through engineering the fatty acid biosynthetic pathways.

BACKGROUND: Schizochytrium sp. is commercially used for production of docosahexaenoic acid (DHA). Schizochytrium sp. utilizes the polyketide synthase complex (PKS) and a single type I fatty acid synthase (FAS) to synthesize polyunsaturated fatty acids and saturated fatty acids, respectively. The acyl carrier protein (ACP) domains of FAS or PKS are used to load acyl groups during fatty acids biosynthesis. Phosphopantetheinyl transferase (PPTase) transfers the pantetheine moiety from Coenzyme A to the conserved serine residue of an inactive ACP domain to produce its active form. RESULTS: In this study, in order to improve production and content of DHA, we decreased the expression of fas, strengthened the expression of the PKS pathway, and enhanced the supply of active ACP in Schizochytrium sp. ATCC20888. Weakening the expression of fas or disruption of orfA both led to growth defect and reduction of lipid yields in the resulting strains WFAS and DPKSA, indicating that both FAS and PKS were indispensable for growth and lipid accumulation. Although WFAS had a higher DHA content in total fatty acids than the wild-type strain (WT), its growth defect and low DHA yield hinders its use for DHA production. Overexpression of the orfAB, orfC, orfC-DH (truncated orfC), or ppt promoted DHA and lipid production, respectively. The yields and contents of DHA were further increased by combined overexpression of these genes. Highest values of DHA yield (7.2 g/L) and DHA content (40.6%) were achieved in a recombinant OPKSABC-PPT, ⁓56.5% and 15.3% higher than the WT values, respectively. CONCLUSIONS: This study demonstrates that genetic engineering of the fatty acid biosynthetic pathways provides a new strategy to enhance DHA production in Schizochytrium.

Association between hypertensive disorders and Bell's palsy in pregnancy: protocol for a systematic review and meta-analysis.

BACKGROUND: Bell's palsy is an idiopathic peripheral nerve palsy involving the facial nerve. Pregnancy, diabetes mellitus and hypertension are the risk factors for Bell's palsy. However, the association between hypertensive disorders and Bell's palsy during pregnancy or the puerperium remains unclear. This systematic review will comprehensively summarise the literature and evaluate the association between Bell's palsy and hypertensive disorders during pregnancy or the puerperium. METHODS AND ANALYSIS: Systematic searches of PubMed, MEDLINE, EMBASE and the Cochrane Central Register of Controlled Trials will be undertaken using prespecified search strategies. Observational studies (cross-sectional studies, cohort studies, case reports and series case reports) written in English that investigate the association between hypertensive disorders of late pregnancy and Bell's palsy during pregnancy or the puerperium will be included. Different authors will independently conduct the eligible study selection, perform data extraction and appraise the quality of included studies. Subgroup analysis will be carried out based on the age of pregnant women (≤35 years old, >35 years old), parity (primipara, multipara) and fetus number (singleton or multiple-gestation pregnancy). ETHICS AND DISSEMINATION: This review will be based on published literature, and thus there is no requirement for ethics approval. The results of this study will aid in the knowledge of the relationship between Bell's palsy during pregnancy or the puerperium and hypertensive disorders of late pregnancy. The results of this systematic review will be shared through publication in a peer-reviewed journal with good visibility for the field of obstetrics and presentations at academic conferences. PROSPERO REGISTRATION NUMBER: CRD42023422902.

A low-background and wash-free signal amplification F-CRISPR biosensor for sensitive quantitative and visible qualitative detection of Salmonella Typhimurium.

In traditional CRISPR-based biosensors, the cleavage-induced signal generation is insufficient because only a signals is generated at a CRISPR-induced cleavage. Herein, we developed an improved CRISPR/Cas12a-based biosensor with an enlarged signal generation which integrated the hybridization chain reaction (HCR) and low-background Förster Resonance Energy Transfer (FRET) signal output mode. The HCR with nucleic acid self-assembly capability was used as a signal carrier to load more signaling molecules. To get the best signal amplification, three different fluorescence signal output modes (fluorescence recovery, FRET and low-background FRET) generated by two fluoresceins, FAM and Cy5, were fully investigated and compared. The results indicated that the low-background FRET signal output mode with the strictest signal generation conditions yielded the highest signal-to-noise ratio (S/N) (19.17) and the most obvious fluorescence color change (from red to yellow). In optimal conditions, the proposed biosensor was successfully applied for Salmonella Typhimurium (S. Typhimurium) detection with 6 h (including 4 h for sample pre-treatment) from the initial target processing to the final detection result. The qualitative sensitivity, reliant on color changes, was 103 CFU/mL. The quantitative sensitivity, calculated by the fluorescence value, were 1.62 × 101 CFU/mL, 3.72 × 102 CFU/mL, and 8.71 × 102 CFU/mL in buffer solution, S. Typhimurium-spiked milk samples, and S.Typhimurium-spiked chicken samples, respectively. The excellent detection performance of the proposed biosensor endowed its great application potential in food and environment safety monitoring.

Inactivation of Bacillus cereus spores by ohmic heating: Efficiency and changes of spore biological properties.

Bacillus cereus spores pose a significant concern during food processing due to their high resistance to environmental stress. Ohmic heating (OH) is an emerging and alternative heating technology with potential for inactivating such spores. This study evaluated the inactivation effects and the biological property changes of Bacillus cereus spores during OH treatments. OH effectively inactivated spores in milk, orange juice, broth, rice soup, and buffer solution in less time than oil bath heating (OB). A decrease in NaCl content improved spore inactivation at the same temperature. Spores were more sensitive to acid at 80-85 °C with OH treatment. Furthermore, OH at 10 V/cm and 50 Hz could reduce the spore resistance and inhibit an increase in spore hydrophobicity and spore aggregation. Both heating methods resulted in significant dipicolinic acid (DPA) leakage and damage to the cortex and inner membranes of the spores. However, OH at 10 V/cm and 50 Hz had the lowest DPA leakage and inflicted the least damage to the inner membrane. The damage to the spore's inner membrane was considered the primary reason for inactivation by OB and OH treatments. Still, OH at 10 V/cm and 50 Hz might also block the germination or outgrowth of treated spores or cause damage to the spore core.

Dual Strategy of Morphology Optimization and Interlayer Expansion in VS2 Cathode Toward High-Performance Mg-Li Hybrid Ion Batteries.

Combining the merits of the dendrite-free formation of a Mg anode and the fast kinetics of Li ions, the Mg-Li hybrid ion batteries (MLIBs) are considered an ideal energy storage system. However, the lack of advanced cathode materials limits their further practical application. Herein, we report a dual strategy of morphology optimization and interlayer expansion for the construction of hierarchical flower-like VS2 architecture coated by N-doped amorphous carbon layers. This tailored hierarchical flower-like structure coupled with homogeneous N-doped amorphous carbon layers cooperatively provide more active sites and buffer volume changes, thus realizing the enhancement of capacity and structural stability. Moreover, the enlarged interlayer spacing caused by the cointercalation of polyvinylpyrrolidone and ammonium ions can effectively promote the charge transfer rate and facilitate the rapid ion diffusion, as further demonstrated by electrochemical results and theoretical calculations. These features endow the hierarchical flower-like VS2 cathode with superior specific energy density (644.4 Wh kg-1, average voltage of 1.2 V vs Mg2+/Mg) and excellent rate capability (181.1 mAh g-1 at 2000 mA g-1). Systematic ex situ characterization measurements are employed to reveal the ion storage mechanism, which confirms that Li+ storage plays a leading role in the capacity contribution of MLIBs. Our strategy is in favor of providing useful insights to design and construct MLIBs with high energy density and excellent rate performance.

Identifying the Potential Apoptotic Metabolites in Postmortem Beef Muscle by Targeted Metabolomics.

Apoptotic cells may release specific metabolites to act as messengers during the apoptotic process. This study represents the first attempt to identify potential apoptotic metabolites in postmortem muscle. Ninety potential apoptotic metabolites in beef were selected and analyzed through targeted metabolomics, with 84 of them exhibiting significant differences over the postmortem time. Following the addition of the mitochondria-targeted antiapoptotic agent mitoquinone to postmortem muscle, metabolomic analysis revealed that 73 apoptotic metabolites still underwent significant changes, even against the backdrop of altered apoptosis. Of these 73 apoptotic metabolites, 54 exhibited similar trends at various treatment times with adding mitoquinone, including lipids (6), amino acids (27), nucleosides (11), and carbohydrate and energy metabolism (10). Mitoquinone significantly reduced the levels of most apoptotic metabolites, and inhibition of apoptosis resulted in a significant decrease in the levels of numerous apoptotic metabolites. Consequently, these apoptotic metabolites are considered complementary to apoptosis in postmortem muscle, with their increased levels potentially promoting apoptosis. Noteworthy apoptotic metabolites, such as glycerol 3-phosphate, serine, AMP, ATP, GMP, and creatine, were identified as active signaling molecules that attract and recruit phagocytes during apoptosis, assisting in recognizing apoptotic cells by phagocytes. This study provides, for the first time, insights into potential apoptotic metabolites in postmortem muscle, contributing to a better understanding of meat biochemistry.