Recent Developments in Synthesis, Properties, Applications and Recycling of Bio-Based Elastomers.

In 2021, global plastics production was 390.7 Mt; in 2022, it was 400.3 Mt, showing an increase of 2.4%, and this rising tendency will increase yearly. Of this data, less than 2% correspond to bio-based plastics. Currently, polymers, including elastomers, are non-recyclable and come from non-renewable sources. Additionally, most elastomers are thermosets, making them complex to recycle and reuse. It takes hundreds to thousands of years to decompose or biodegrade, contributing to plastic waste accumulation, nano and microplastic formation, and environmental pollution. Due to this, the synthesis of elastomers from natural and renewable resources has attracted the attention of researchers and industries. In this review paper, new methods and strategies are proposed for the preparation of bio-based elastomers. The main goals are the advances and improvements in the synthesis, properties, and applications of bio-based elastomers from natural and industrial rubbers, polyurethanes, polyesters, and polyethers, and an approach to their circular economy and sustainability. Olefin metathesis is proposed as a novel and sustainable method for the synthesis of bio-based elastomers, which allows for the depolymerization or degradation of rubbers with the use of essential oils, terpenes, fatty acids, and fatty alcohols from natural resources such as chain transfer agents (CTA) or donors of the terminal groups in the main chain, which allow for control of the molecular weights and functional groups, obtaining new compounds, oligomers, and bio-based elastomers with an added value for the application of new polymers and materials. This tendency contributes to the development of bio-based elastomers that can reduce carbon emissions, avoid cross-contamination from fossil fuels, and obtain a greener material with biodegradable and/or compostable behavior.

Quercetin and Its Fermented Extract as a Potential Inhibitor of Bisphenol A-Exposed HT-29 Colon Cancer Cells' Viability.

Bisphenol A (BPA) promotes colon cancer by altering the physiological functions of hormones. Quercetin (Q) can regulate signaling pathways through hormone receptors, inhibiting cancer cells. The antiproliferative effects of Q and its fermented extract (FEQ, obtained by Q gastrointestinal digestion and in vitro colonic fermentation) were analyzed in HT-29 cells exposed to BPA. Polyphenols were quantified in FEQ by HPLC and their antioxidant capacity by DPPH and ORAC. Q and 3,4-dihydroxyphenylacetic acid (DOPAC) were quantified in FEQ. Q and FEQ exhibited antioxidant capacity. Cell viability with Q+BPA and FEQ+BPA was 60% and 50%, respectively; less than 20% of dead cells were associated with the necrosis process (LDH). Treatments with Q and Q+BPA induced cell cycle arrest in the G0/G1 phase, and FEQ and FEQ+BPA in the S phase. Compared with other treatments, Q positively modulated ESR2 and GPR30 genes. Using a gene microarray of the p53 pathway, Q, Q+BPA, FEQ and FEQ+BPA positively modulated genes involved in apoptosis and cell cycle arrest; bisphenol inhibited the expression of pro-apoptotic and cell cycle repressor genes. In silico analyses demonstrated the binding affinity of Q > BPA > DOPAC molecules for ERα and ERß. Further studies are needed to understand the role of disruptors in colon cancer.

Fermentation Extract of Naringenin Increases the Expression of Estrogenic Receptor ß and Modulates Genes Related to the p53 Signalling Pathway, miR-200c and miR-141 in Human Colon Cancer Cells Exposed to BPA.

The estrogenic receptor beta (ERß) protects against carcinogenesis by stimulating apoptosis. Bisphenol A (BPA) is related to promoting cancer, and naringenin has chemoprotective activities both can bind to ERß. Naringenin in the colon is metabolized by the microbiota. Cancer involves genetic and epigenetic mechanisms, including miRNAs. The objective of the present study was to evaluate the co-exposure effect of colonic in vitro fermented extract of naringenin (FEN) and BPA, to elucidate molecular effects in HT-29 colon cancer cell line. For this, we quantified genes related to the p53 signaling pathway as well as ERß, miR-200c, and miR-141. As an important result, naringenin (IC50 250 µM) and FEN (IC50 37%) promoted intrinsic pathways of apoptosis through phosphatase and tensin homolog (PTEN) (+2.70, +1.72-fold, respectively) and CASP9 (+3.99, +2.03-fold, respectively) expression. BPA decreased the expression of PTEN (-3.46-fold) gene regulated by miR-200. We suggest that once co-exposed, cells undergo a greater stress forcing them to mediate other extrinsic apoptosis mechanisms associated with death domain FASL. In turn, these findings are related to the increase of ERß (5.3-fold with naringenin and 13.67-fold with FEN) gene expression, important in the inhibition of carcinogenic development.

Extraction of Acetogenins Using Thermosonication-Assisted Extraction from Annona muricata Seeds and Their Antifungal Activity.

The objective of this work was to find the optimal conditions by thermosonication-assisted extraction (TSAE) of the total acetogenin content (TAC) and yield from A. muricata seeds, assessing the effect of the temperature (40, 50, and 60 °C), sonication amplitude (80, 90, and 100%), and pulse-cycle (0.5, 0.7, and 1 s). In addition, optimal TSAE conditions of acetogenins (ACGs) were compared with extraction by ultrasound at 25 °C and the soxhlet method measuring TAC and antioxidant capacity. Moreover, solubility and identification of isolated ACGs were performed. Furthermore, the antifungal activity of ACGs crude extract and isolated ACGs was evaluated. Optimal TSAE conditions to extract the highest TAC (35.89 mg/g) and yield (3.6%) were 50 °C, 100% amplitude, and 0.5 s pulse-cycle. TSAE was 2.17-fold and 15.60-fold more effective than ultrasound at 25 °C and the Soxhlet method to extract ACGs with antioxidant capacity. Isolated ACGs were mostly soluble in acetone and methanol. Seven ACGs were identified, and pseudoannonacin was the most abundant. The inhibition of Candida albicans, Candida krusei, and Candida tropicalis was higher from isolated ACGs than crude extract. TSAE was effective to increase the yield in the ACGs extraction from A. muricata seeds and these ACGs have important antifungal activity.

Plasma membrane damage repair is mediated by an acid sphingomyelinase in Entamoeba histolytica.

Entamoeba histolytica is a pathogen that during its infective process confronts the host defenses, which damages the amoebic plasma membrane (PM), resulting in the loss of viability. However, it is unknown whether amoebic trophozoites are able to repair their PM when it is damaged. Acid sphingomyelinases (aSMases) have been reported in mammalian cells to promote endocytosis and removal of PM lesions. In this work, six predicted amoebic genes encoding for aSMases were found to be transcribed in the HM1:IMSS strain, finding that the EhaSM6 gene is the most transcribed in basal growth conditions and rendered a functional protein. The secreted aSMase activity detected was stimulated by Mg+2 and inhibited by Co+2. Trophozoites that overexpress the EhaSM6 gene (HM1-SM6HA) exhibit an increase of 2-fold in the secreted aSMase activity. This transfectant trophozoites exposed to pore-forming molecules (SLO, Magainin, ß-Defensin 2 and human complement) exhibited an increase from 6 to 25-fold in the secreted aSMase activity which correlated with higher amoebic viability in a Ca+2 dependent process. However, other agents that affect the PM such as hydrogen peroxide also induced an increase of secreted aSMase, but to a lesser extent. The aSMase6 enzyme is N- and C-terminal processed. Confocal and transmission electron microscopy showed that trophozoites treated with SLO presented a migration of lysosomes containing the aSMase towards the PM, inducing the formation of membrane patches and endosomes in the control strain. These cellular structures were increased in the overexpressing strain, indicating the involvement of the aSMase6 in the PM injury repair. The pore-forming molecules induced an increase in the expression of EhaSM1, 2, 5 and 6 genes, meanwhile, hydrogen peroxide induced an increase in all of them. In all the conditions evaluated, the EhaSM6 gene exhibited the highest levels of induction. Overall, these novel findings show that the aSMase6 enzyme from E. histolytica promotes the repair of the PM damaged with pore-forming molecules to prevent losing cell integrity. This novel system could act when encountered with the lytic defense systems of the host.

From Intermolecular Interactions to Texture in Polycrystalline Surfaces of 1,ω-alkanediols (ω = 10-13).

Differences on herringbone molecular arrangement in two forms of long-chain 1,ω-alkanediols (CnH2n+2O2 with n = 10, 11, 12, 13) are explained from the analysis of O-H···O hydrogen-bond sequences in infinite chains and the role of a C-H···O intramolecular hydrogen-bond in stabilization of a gauche defect, as well as the inter-grooving effectiveness on molecular packing. GIXD (Glancing Incidence X-ray Diffraction) experiments were conducted on polycrystalline monophasic samples. Diffracted intensities were treated with the multi-axial March-Dollase method to correlate energetic and geometrical features of molecular interactions with the crystalline morphology and textural pattern of samples. The monoclinic (P21/c, Z = 2) crystals of the even-numbered members (n = 10, 12; DEDOL and DODOL, respectively) are diametrical prisms with combined form {104}/{-104}/{001} and present a two-fold platelet-like preferred orientation, whereas orthorhombic (P212121, Z = 4) odd-numbered members (n = 11, 13; UNDOL and TRDOL, respectively) present a dominant needle-like orientation on direction [101] (fiber texture). We show that crystalline structures of medium complexity and their microstructures can be determined from rapid GIXD experiments from standard radiation, combined with molecular replacement procedure using crystal structures of compounds with higher chain lengths as reference data.

Nanoemulsion Formulations of Fungicide Tebuconazole for Agricultural Applications.

Tebuconazole (TBZ) nanoemulsions (NEs) were formulated using a low energy method. TBZ composition directly affected the drop size and surface tension of the NE. Water fraction and the organic-to-surfactant-ratio (RO/S) were evaluated in the range of 1-90 and 1-10 wt %, respectively. The study was carried out with an organic phase (OP) consisting of an acetone/glycerol mixture containing TBZ at a concentration of 5.4 wt % and Tween 80 (TW80) as a nonionic and Agnique BL1754 (AG54) as a mixture of nonionic and anionic surfactants. The process involved a large dilution of a bicontinuous microemulsion (ME) into an aqueous phase (AP). Pseudo-ternary phase diagrams of the OP//TW80//AP and OP//AG54//AP systems at T = 25 °C were determined to map ME regions; these were in the range of 0.49-0.90, 0.01-0.23, and 0.07-0.49 of OP, AP, and surfactant, respectively. Optical microscope images helped confirm ME formation and system viscosity was measured in the range of 25-147 cP. NEs with drop sizes about 9 nm and 250 nm were achieved with TW80 and AG54, respectively. An innovative low-energy method was used to develop nanopesticide TBZ formulations based on nanoemulsion (NE) technology. The surface tension of the studied systems can be lowered 50% more than that of pure water. This study's proposed low-energy NE formulations may prove useful in sustainable agriculture.

Stable nisin food-grade electrospun fibers.

Most of antimicrobial peptides interact with food components decreasing their activity, which limit their successful incorporation into packaging material, functional foods and edible films. The aim of this work was to develop a nisin carrier. Nanofibers of amaranth protein and pullulan (50:50) loaded with nisin were obtained by electrospinning. The nanofibers morphology was determined by scanning electron microscopy and fluorescent microscopy. The molecular interactions were characterized by infrared spectroscopy, X-ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The nisin loading efficiency as well as the antimicrobial activity against Leuconostoc mesenteroides were evaluated. The micrographs of the obtained materials exhibited smooth and continuous fibers with no defects characterized by diameters between 124 and 173 nm. The FTIR analysis showed intermolecular interactions mainly by hydrogen bonding. The electrospinning process improved the thermal properties of the polymeric mixture displacing the Tm peak to higher temperatures and increasing crystallinity. The antimicrobial activity of nisin in broth and agar against L. mesenteroides was maintained after incorporation into fibers. The results presented an outlook for the potential use of protein amaranth nanofibers when incorporating antimicrobials as a food preservation strategy.

Synthesis of photochromic oligophenylenimines: optical and computational studies.

Phenyleneimine oligomers 4,4'-(((1E,1'E)-(((1E,1'E)-(1,4-phenylenebis-(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy)-4,1-phenylene))bis(methanylyl-idene))-bis(azanylylidene))dianiline (OIC1MS) and 7,7'-(((1E,1'E)-(((1E,1'E)-((9H-fluorene-2,7-diyl)bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy)-4,1phenylene))bis- (methanylylidene))bis(azanylylidene))bis(9H-fluoren-2-amine) (OIC2MS) were prepared by means of conventional and mechanochemical synthesis and characterized by FT-IR, 1H- and 13C-NMR techniques. The optical properties of the compounds were studied in solution by using UV-visible spectroscopy, and the optical effects were analyzed as a function of solvent. The results show that OIC2MS exhibits interesting photochromic properties. Furthermore, the structural and electronic properties of the compounds were analyzed by TD-DFT. It was found that the mechanosynthesis is an efficient method for the synthesis of both tetraimines.

Novel gigahertz frequency dielectric relaxations in chitosan films.

Molecular relaxations of chitosan films have been investigated in the wide frequency range of 0.1 to 3 × 10(9) Hz from -10 °C to 110 °C using dielectric spectroscopy. For the first time, two high-frequency relaxation processes (in the range 10(8) to 3 × 10(9) Hz) are reported in addition to the low frequency relaxations α and ß. These two relaxation processes are related to the vibrations of OH and NH2/NH3(+), respectively. The high-frequency relaxations exhibit Arrhenius-type dependencies in the temperature range 10 °C to 54 °C with negative activation energy; this observation is traceable to hydrogen bonding reorientation. At temperatures above the glass transition temperature (54 °C), the activation energy changes from negative to positive values due to breaking of hydrogen bonding and water loss. Upon cooling in a sealed environment, the activation energies of two relaxation processes are nearly zero. FTIR and XRD analyses reveal associated structural changes upon heating and cooling. These two new high-frequency relaxation processes can be attributed to the interaction of bound water with OH and NH2/NH3(+), respectively. A plausible scenario for these high-frequency relaxations is discussed in light of impedance spectroscopy, TGA, FTIR and XRD measurements.

Development of an electrochemical sensor for the quantification of ascorbic acid and acetaminophen in pharmaceutical samples.

This work presents the modification of glassy carbon electrodes (GCE) by using a dispersion resulting from the non-covalent functionalization of multi-walled carbon nanotubes (MWCNT) with polyarginine (polyArg). MWCNT-polyArg is used for the quantification of ascorbic acid (AA) in the presence of acetaminophen (APAP) and viceversa. Since ascorbic acid and acetaminophen are strongly absorbed on GCE/MWCNT-polyArg, they can be detected in the presence of 4.0×10-5 M acetaminophen (and 3.0×10-5 M ascorbic acid) by using adsorptive stripping with media exchange and differential pulse voltammetry. Using water as the solvent for the MWCNT dispersion, the result was Z-potential of 0.053 ± 0.006 V. The developed sensor showed excellent specificity, sensitivity, stability and reproducibility compared to previously published sensors. The GCE/MWCNT-polyArg sensor shows a fast response time of ∼5 minutes, low limits of detection and quantification for AA (0.95 and 2.9 µM respectively) and APAP (0.27 and 0.82µM, respectively), high sensitivity of 0.0616 µA/M for AA or APAP 0.240µA/M. It was used to test its practicability by determining the concentration of AA or APAP (AA and APAP) in pharmaceutical samples. Finally, the simultaneous measurement of ascorbic acid and acetaminophen in pharmaceuticals showed a good correlation, with a maximum error and RSD of 4.5 and 5.1 %, respectively.

Annonaceae acetogenins: A potential treatment for gynecological and breast cancer.

Breast and gynecological cancers are major health concerns due to their increasing incidence rates, and in some cases, their low survival probability. In recent years, multiple compounds of natural origin have been analyzed as alternative treatments for this disease. For instance, Acetogenins are plant secondary metabolites from the Annonaceae family, and its potential anticancer activity has been reported against a wide range of cancer cells both in vitro and in vivo. Several studies have demonstrated promising results of Acetogenins' antitumor capacity, given their selective activity of cellular inhibition at low concentrations. This review outlines the origin, structure, and antineoplastic activities in vitro and in vivo of Acetogenins from Annonaceae against breast cancer and gynecological cancers reported to date. Here, we also provide a systematic summary of the activity and possible mechanisms of action of Acetogenins against these types of cancer and provide references for developing future therapies based on Acetogenins and nanotechnologies.

Evaluation of the synergistic effects of curcumin-resveratrol co-loaded biogenic silica on colorectal cancer cells.

Colorectal cancer (CRC) remains a significant global health concern, being the third most diagnosed cancer in men and the second most diagnosed cancer in women, with alarming mortality rates. Natural phytochemicals have gained prominence among various therapeutic avenues explored due to their diverse biological properties. Curcumin, extracted from turmeric, and resveratrol, a polyphenol found in several plants, have exhibited remarkable anticancer activities. However, their limited solubility and bioavailability hinder their therapeutic efficacy. To enhance the bioavailability of these compounds, nanomaterials work as effective carriers with biogenic silica (BS) attracting major attention owing to their exceptional biocompatibility and high specific surface area. In this study, we developed Curcumin-resveratrol-loaded BS (Cur-Res-BS) and investigated their effects on colorectal cancer cell lines (HCT-116 and Caco-2). Our results demonstrated significant concentration-dependent inhibition of cell viability in HCT-116 cells and revealed a complex interplay of crucial proto-onco or tumor suppressor genes, such as TP53, Bax, Wnt-1, and CTNNB1, which are commonly dysregulated in colorectal cancer. Notably, Cur-Res-BS exhibited a synergistic impact on key signaling pathways related to colorectal carcinogenesis. While these findings are promising, further investigations are essential to comprehensively understand the mechanisms and optimize the therapeutic strategy. Moreover, rigorous safety assessments and in vitro studies mimicking the in vivo environment are imperative before advancing to in vivo experiments, ensuring the potential of Cur-Res-BS as an efficient treatment for CRC.

Correction: Development and characterization of three-dimensional antibacterial nanocomposite sponges of chitosan, silver nanoparticles and halloysite nanotubes.

[This corrects the article DOI: 10.1039/D4RA04274C.].

Hydrogel Based on Chitosan/Gelatin/Poly(Vinyl Alcohol) for In Vitro Human Auricular Chondrocyte Culture.

Three-dimensional (3D) hydrogels provide tissue-like complexities and allow for the spatial orientation of cells, leading to more realistic cellular responses in pathophysiological environments. There is a growing interest in developing multifunctional hydrogels using ternary mixtures for biomedical applications. This study examined the biocompatibility and suitability of human auricular chondrocytes from microtia cultured onto steam-sterilized 3D Chitosan/Gelatin/Poly(Vinyl Alcohol) (CS/Gel/PVA) hydrogels as scaffolds for tissue engineering applications. Hydrogels were prepared in a polymer ratio (1:1:1) through freezing/thawing and freeze-drying and were sterilized by autoclaving. The macrostructure of the resulting hydrogels was investigated by scanning electron microscopy (SEM), showing a heterogeneous macroporous structure with a pore size between 50 and 500 µm. Fourier-transform infrared (FTIR) spectra showed that the three polymers interacted through hydrogen bonding between the amino and hydroxyl moieties. The profile of amino acids present in the gelatin and the hydrogel was determined by ultra-performance liquid chromatography (UPLC), suggesting that the majority of amino acids interacted during the formation of the hydrogel. The cytocompatibility, viability, cell growth and formation of extracellular matrix (ECM) proteins were evaluated to demonstrate the suitability and functionality of the 3D hydrogels for the culture of auricular chondrocytes. The cytocompatibility of the 3D hydrogels was confirmed using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, reaching 100% viability after 72 h. Chondrocyte viability showed a high affinity of chondrocytes for the hydrogel after 14 days, using the Live/Dead assay. The chondrocyte attachment onto the 3D hydrogels and the formation of an ECM were observed using SEM. Immunofluorescence confirmed the expression of elastin, aggrecan and type II collagen, three of the main components found in an elastic cartilage extracellular matrix. These results demonstrate the suitability and functionality of a CS/Gel/PVA hydrogel as a 3D support for the auricular chondrocytes culture, suggesting that these hydrogels are a potential biomaterial for cartilage tissue engineering applications, aimed at the regeneration of elastic cartilage.

Porous Chitosan Hydrogels Produced by Physical Crosslinking: Physicochemical, Structural, and Cytotoxic Properties.

Chitosan hydrogels are biomaterials with excellent potential for biomedical applications. In this study, chitosan hydrogels were prepared at different concentrations and molecular weights by freeze-drying. The chitosan sponges were physically crosslinked using sodium bicarbonate as a crosslinking agent. The X-ray spectroscopy (XPS and XRD diffraction), equilibrium water content, microstructural morphology (confocal microscopy), rheological properties (temperature sweep test), and cytotoxicity of the chitosan hydrogels (MTT assay) were investigated. XPS analysis confirmed that the chitosan hydrogels obtained were physically crosslinked using sodium bicarbonate. The chitosan samples displayed a semi-crystalline nature and a highly porous structure with mean pore size between 115.7 ± 20.5 and 156.3 ± 21.8 µm. In addition, the chitosan hydrogels exhibited high water absorption, showing equilibrium water content values from 23 to 30 times their mass in PBS buffer and high thermal stability from 5 to 60 °C. Also, chitosan hydrogels were non-cytotoxic, obtaining cell viability values ≥ 100% for the HT29 cells. Thus, physically crosslinked chitosan hydrogels can be great candidates as biomaterials for biomedical applications.

Biogenic Silver Nanoparticles and Stressors Generate Synergistic Growth Inhibition in Candida Species through Cell Wall Damage, Osmotic Stress, and Oxidative Stress.

BACKGROUND: The need to combat and reduce the incidence, virulence, and drug resistance of species belonging to Candida genus, has led to the development of new strategies. Nanotechnology, through the implementation of nanomaterials, has emerged as an infallible tool to treat various diseases caused by pathogens, where its mechanisms of action prevent the development of undesirable pharmacological resistance. OBJECTIVE: The antifungal activity and adjuvant properties of biogenic silver nanoparticles in different Candida species (C. parapsilosis, C. glabrata, and C. albicans) are evaluated. METHODS: The biogenic metallic nanoparticles were developed by quercetin-mediated biological synthesis. The physicochemical properties were studied by light scattering, electrophoretic mobility, UV-vis and infrared spectroscopy, and transmission electron microscopy. The elucidation of mechanisms of antifungal action was carried out under stress conditions in Candida species at the cell wall and response to oxidative stress. RESULTS: Small silver nanoparticles (≈ 16.18 nm) with irregular morphology, and negative surface electrical charge (≈ -48.99 mV), were obtained through quercetin-mediated biosynthesis. Infrared spectra showed that the surface of silver nanoparticles is functionalized with the quercetin molecule. The antifungal activity of biogenic nanoparticles had efficacy in the following trend C. glabrata ≥ C. parapsilosis > C. albicans. Biogenic nanoparticles and stressors showed synergistic and potentiated antifungal effects through cell damage, osmotic stress, cell wall damage, and oxidative stress. CONCLUSIONS: Silver nanoparticles synthesized by quercetin-mediated biosynthesis could be implemented as a powerful adjuvant agent to enhance the inhibition effects of diverse compounds over different Candida species.

Potential Use of Chitosan-TiO2 Nanocomposites for the Electroanalytical Detection of Imidacloprid.

The detection of toxic insecticides is a major scientific and technological challenge. In this regard, imidacloprid is a neonicotinoid that is a systemic insecticide that can accumulate in agricultural products and affect human health. This work aims to study the properties of chitosan-TiO2 nanocomposites in which nanoparticles with high surface area serve as molecular recognition sites for electroanalytical imidacloprid detection. We show that the best sensitivity to imidacloprid was obtained using a modified electrode with a chitosan-TiO2 nanocomposite with a 40 wt.% of TiO2 nanoparticles. By using a three-phase effective permittivity model which includes chitosan, TiO2, an interface layer between nanoparticles and a matrix, we showed that nanocomposites with 40 wt.% of TiO2 the interface volume fraction reaches a maximum. At higher nanoparticle concentration, the sensitivity of the sensor decreases due to the decreasing of the interface volume fraction, agglomeration of nanoparticles and a decrease in their effective surface area. The methodology presented can be helpful in the design and optimization of polymer-based nanocomposites for a variety of applications.

Improving the Mechanical Resistance of Hydroxyapatite/Chitosan Composite Materials Made of Nanofibers with Crystalline Preferential Orientation.

The stability and mechanical properties of hydroxyapatite (HAp)/Chitosan composite materials depend on the dispersion of HAp aggregates in the chitosan matrix and on the chemical interaction between them. Therefore, hexagonal cross-sectioned HAp nanofibers were produced using a microwave-assisted hydrothermal method. Glutamic acid was used to control the HAp crystal growth; thereby, nanofibers were obtained with a preferential crystalline orientation, and they were grown along the "c" axis of HAp crystal structures. This morphology exposed the (300) and (100) crystal planes on the surface, and several phosphate groups and calcium ions were also exposed; they were able to form numerous chemical interactions with the amine, hydroxyl, and carbonyl groups of chitosan. Consequently, the final mechanical resistance of the composite materials was synergistically increased. Nanofibers were mixed with commercial chitosan using a sonotrode to improve their dispersion within the biopolymer matrix and prevent migration. The HAp nanofiber/Chitosan composite materials showed higher mechanical resistance than that observed in similar materials with the same chemical composition that were made of commercial HAp powders, which were used as reference materials. The mechanical resistance under tension of the composite materials made of nanofibers was similar to that reported for cortical bone.

Gelatin-Coated Magnetic Nanowires for High-Sensitivity Optical Labels.

The encapsulation of magnetic nickel nanowires (NiNWs) with gelatin is proposed as an alternative for optical label detection. Magnetic nanowires can be detected at very low concentrations using light-scattering methods. This detection capacity could be helpful in applications such as transducers for molecular and biomolecular sensors; however, potential applications require the attachment of specific binding molecules to the nanowire structure. In the present study, a method is presented which is helpful in coating magnetic nanowires with gelatin, a material with the potential to handle specific decoration and functionalization of the nanowires; in the first case, silver nanoparticles (AgNPs) are efficiently used to decorate the nanowires. Furthermore, it is shown that the synthesized gelatin-coated particles have excellent detectability to the level of 140 pg/mL; this level of detection outperforms more complex techniques such as ICP-OES (~3 ng/mL for Ni) and magnetoresistance sensing (~10 ng/mL for magnetic nanoparticles).