Design and preliminary evaluation of a multi-channel multi-energy point integrated Wolter microscope.

In inertial confinement fusion, high-precision x-ray imaging is crucial for understanding the states of matter under extreme conditions. To observe the target asymmetry during compression, multiple imaging spots with varying energy responses are necessary. However, integrating multiple imaging channels in a grazing incidence x-ray imaging scheme is challenging, and there is an urgent need for effective combination of multi-color and high-throughput diagnostics. This study presents a design method for a multi-channel integrated Wolter microscope with high spatial resolution, wide-band response, and high throughput. The basic optical configuration, adjustment method, and multi-channel integration scheme are discussed in detail. A 10 keV-class three-channel integrated Wolter microscope is proposed for verification, with an estimated spatial resolution better than 4.0 µm in a field of view of ±500µm. The peak response efficiencies for each imaging channel are calculated as 5.2×10-5 s r, 8.6×10-5 s r, and 2.2×10-4 s r, respectively.

Elastic Particle Swarm Optimization for MarSCoDe Spectral Calibration on Tianwen-1 Mars Rover.

China's Tianwen-1 Mars rover carries a laser-induced breakdown spectroscopy (LIBS) payload named MarSCoDe to analyze the mineral and rock composition on Mars. MarSCoDe is expected to experience a wide working temperature range of about 100 °C, which will lead to a spectral shift of up to ∼40 pixels (∼8.13 nm). Even worse, drastic changes in temperature and environment may cause a loss or increase of some spectral lines of an on-board calibration Ti target. An elastic particle swarm optimization (PSO) approach is proposed to fulfill the on-board spectral calibration of MarSCoDe under this harsh condition. Through establishing a standard wavelength set (SWS) and an individual particle wavelength set (PWS), and further elastically selecting a part of PWS to compare with SWS, the problem of spectral shift and number mismatch can be solved gradually with the evolution of the particle swarm. Some tests of standard lamps and Ti with MarSCoDe, placed in a Mars simulation environment chamber (MSEC) in a temperature range of 70 °C, were completed. Compared with the standard spectrum of the Ti target (obtained at 20 °C), the spectral shifts of the first, second, and third channels are approximately 0.33 nm (5 pixels), 0.85 nm (6.4 pixels), and 8.09 nm (39.8 pixels), respectively, at -40 °C before correction; after PSO correction, the spectral shifts are greatly reduced to up to 0.015 nm, and specially for the 626.28 nm line, the spectral shift is reduced from 8.09 nm to about 0 nm. Experimental results demonstrate that the PSO-based approach can not only correct the on-board spectral shift but also solve the number mismatch of spectral lines of MarSCoDe in the harsh working environment of Mars. Further, it can be extended to the on-board calibration of other spectral payloads for deep space exploration.

Basic principles and optical system design of 17.48 keV high-throughput modified Wolter x-ray microscope.

High-precision x-ray imaging diagnostics of hotspot at the stagnation stage are essential for regulating implosion asymmetry and retrieving physical implosion parameters. With regard to 10-20 keV energy band imaging, existing diagnostic instruments such as Kirkpatrick-Baez microscopes and pinhole cameras are insufficient in terms of spatial resolution and collection efficiency. The situation is even worse when high-speed, time-resolved imaging diagnostics are performed by coupling framing cameras or line-of-sight imagers. This article presents the basic principles and optical system design of a 17.48 keV modified Wolter x-ray microscope, to resolve the problems encountered in high-energy imaging diagnostics. The proposed optical configuration offers a better spatial resolution, greater depth of field, and preliminary compliance with the requirements of high precision optical processing techniques. The spatial resolution is better than 1 µm in a field range ±150 µm, and is better than 3 µm in a total field of view ∼408 µm in diameter. The geometric solid angle is calculated as 3.0 × 10-5 sr and is estimated to be 1.2 × 10-6 sr, considering the reflectivity of the double mirrors. The proposed microscope is expected to effectively improve spatial resolution and signal-to-noise ratio for high-energy imaging diagnostics.

Dynamic confocal Raman spectroscopy of flowing blood in bionic blood vessel.

How to quickly and safely identify blood species has always been an urgent problem for scientists. Smear test method has the risk of blood contamination, and the blood itself may carry some unknown viruses or pathogens, which will bring health risks to the testing personnel. Therefore, in order to meet the urgent needs of rapid and safe detection of blood, a technology which can detect dynamic confocal Raman spectroscopy of flowing blood in bionic blood vessel was proposed. The blood, which was sealed in the bionic blood vessel, flowed through the focus gaze area of laser by the microfluidic pump, to detect the dynamic blood Raman spectrum. Human blood and cattle blood were selected as experimental objects, and the experiments were carried out under the same parameters. Combined with PCA-LDA (principal component analysis and linear discriminate analysis) classification model, the predictive classification of the two species without error recognition was realized. The hidden weak Raman signals were mined by derivative spectra, and the fundamental differences of Raman spectra of two species were compared. Then the biochemical information that caused the differences was also analyzed. The results show the method can meet the detection requirements of sealed blood, and the Raman spectra of flowing blood is more representative than those of static blood.

Rapid detection of Chinese-specific peony seed oil by using confocal Raman spectroscopy and chemometrics.

Peony seed oil (PSO) is a new woody nut oil which is unique to China. Its unsaturated fatty acids are over 90% and are rich in α - linolenic acid. Although the PSO industry is in its infancy, it is bound to become a top vegetable oil food material because of its own advantages. The potential high commercial profit of its adulteration with cheap vegetable oil will be an important factor hindering the healthy development of PSO industry. It is of great significance to study the adulteration of PSO for preventing large-scale adulteration. In this study, the qualitative and quantitative analysis of PSO was realised based on Raman spectroscopy combined with chemometrics analysis, and the fatty acid composition of PSO was analysed according to Raman characteristic peaks. The technology can be applied to routine analysis and quality control of PSO.