Metal telluride nanosheets by scalable solid lithiation and exfoliation.

Transition metal tellurides (TMTs) have been ideal materials for exploring exotic properties in condensed-matter physics, chemistry and materials science1-3. Although TMT nanosheets have been produced by top-down exfoliation, their scale is below the gram level and requires a long processing time, restricting their effective application from laboratory to market4-8. We report the fast and scalable synthesis of a wide variety of MTe2 (M = Nb, Mo, W, Ta, Ti) nanosheets by the solid lithiation of bulk MTe2 within 10 min and their subsequent hydrolysis within seconds. Using NbTe2 as a representative, we produced more than a hundred grams (108 g) of NbTe2 nanosheets with 3.2 nm mean thickness, 6.2 µm mean lateral size and a high yield (>80%). Several interesting quantum phenomena, such as quantum oscillations and giant magnetoresistance, were observed that are generally restricted to highly crystalline MTe2 nanosheets. The TMT nanosheets also perform well as electrocatalysts for lithium-oxygen batteries and electrodes for microsupercapacitors (MSCs). Moreover, this synthesis method is efficient for preparing alloyed telluride, selenide and sulfide nanosheets. Our work opens new opportunities for the universal and scalable synthesis of TMT nanosheets for exploring new quantum phenomena, potential applications and commercialization.

Glycosylphosphatidylinositol anchor lipid remodeling directs proteins to the plasma membrane and governs cell wall mechanics.

Glycosylphosphatidylinositol (GPI) anchoring is a common protein modification that targets proteins to the plasma membrane (PM). Knowledge about the GPI lipid tail, which guides the secretion of GPI-anchored proteins (GPI-APs), is limited in plants. Here, we report that rice (Oryza sativa) BRITTLE CULM16 (BC16), a membrane-bound O-acyltransferase (MBOAT) remodels GPI lipid tails and governs cell wall biomechanics. The bc16 mutant exhibits fragile internodes, resulting from reduced cell wall thickness and cellulose content. BC16 is the only MBOAT in rice and is located in the endoplasmic reticulum and Golgi apparatus. Yeast gup1Δ mutant restoring assay and GPI lipid composition analysis demonstrated BC16 as a GPI lipid remodelase. Loss of BC16 alters GPI lipid structure and disturbs the targeting of BC1, a GPI-AP for cellulose biosynthesis, to the PM lipid nanodomains. Atomic force microscopy revealed compromised deposition of cellulosic nanofibers in bc16, leading to an increased Young's modulus and abnormal mechanical properties. Therefore, BC16-mediated lipid remodeling directs the GPI-APs, such as BC1, to the cell surface to fulfill multiple functions, including cellulose organization. Our work unravels a mechanism by which GPI lipids are remodeled in plants and provides insights into the control of cell wall biomechanics, offering a tool for breeding elite crops with improved support strength.

Identification and validation of stable reference genes for RT-qPCR analyses of Kobresia littledalei seedlings.

BACKGROUND: Kobreisa littledalei, belonging to the Cyperaceae family is the first Kobresia species with a reference genome and the most dominant species in Qinghai-Tibet Plateau alpine meadows. It has several resistance genes which could be used to breed improved crop varieties. Reverse Transcription Quantitative Real-Time Polymerase Chain Reaction (RT-qPCR) is a popular and accurate gene expression analysis method. Its reliability depends on the expression levels of reference genes, which vary by species, tissues and environments. However, K.littledalei lacks a stable and normalized reference gene for RT-qPCR analysis. RESULTS: The stability of 13 potential reference genes was tested and the stable reference genes were selected for RT-qPCR normalization for the expression analysis in the different tissues of K. littledalei under two abiotic stresses (salt and drought) and two hormonal treatments (abscisic acid (ABA) and gibberellin (GA)). Five algorithms were used to assess the stability of putative reference genes. The results showed a variation amongst the methods, and the same reference genes showed tissue expression differences under the same conditions. The stability of combining two reference genes was better than a single one. The expression levels of ACTIN were stable in leaves and stems under normal conditions, in leaves under drought stress and in roots under ABA treatment. The expression of glyceraldehyde-3-phosphate dehydrogenase (GAPDH) expression was stable in the roots under the control conditions and salt stress and in stems exposed to drought stress. Expression levels of superoxide dismutase (SOD) were stable in stems of ABA-treated plants and in the roots under drought stress. Moreover, RPL6 expression was stable in the leaves and stems under salt stress and in the stems of the GA-treated plants. EF1-alpha expression was stable in leaves under ABA and GA treatments. The expression levels of 28 S were stable in the roots under GA treatment. In general, ACTIN and GAPDH could be employed as housekeeping genes for K. littledalei under different treatments. CONCLUSION: This study identified the best RT-qPCR reference genes for different K. littledalei tissues under five experimental conditions. ACTIN and GAPDH genes can be employed as the ideal housekeeping genes for expression analysis under different conditions. This is the first study to investigate the stable reference genes for normalized gene expression analysis of K. littledalei under different conditions. The results could aid molecular biology and gene function research on Kobresia and other related species.

Recent Advances of Engineered Cell Membrane-Based Nanotherapeutics to Combat Inflammatory Diseases.

An immune reaction known as inflammation serves as a shield from external danger signals, but an overactive immune system may additionally lead to tissue damage and even a variety of inflammatory disorders. By inheriting biological functionalities and serving as both a therapeutic medication and a drug carrier, cell membrane-based nanotherapeutics offer the potential to treat inflammatory disorders. To further strengthen the anti-inflammatory benefits of natural cell membranes, researchers alter and optimize the membranes using engineering methods. This review focuses on engineered cell membrane-based nanotherapeutics (ECMNs) and their application in treating inflammation-related diseases. Specifically, this article discusses the methods of engineering cell membranes for inflammatory diseases and examines the progress of ECMNs in inflammation-targeted therapy, inflammation-neutralizing therapy, and inflammation-immunomodulatory therapy. Additionally, the article looks into the perspectives and challenges of ECMNs in inflammatory treatment and offers suggestions as well as guidance to encourage further investigations and implementations in this area.

Regulation of Fluorescence and Self-assembly of a Salicylaldehyde Azine-Containing Amphiphile by Pillararene.

Regulation of fluorescence and self-assembly of a salicylaldehyde azine-containing amphiphile by a water-soluble pillar[5]arene via host-guest recognition in water was realized. The fluorescence and the self-assembled aggregates of the bola-type amphiphile G can be tailored by adding different amounts of water-soluble pillar[5]arene (WP5). In addition, the emission property and self-assembly behavior of G and WP5 are responsive to pH conditions. Furthermore, the fluorescence emission property of G and the regulation by WP5 or pH conditions was applied as information encryption material, rewritable paper, and erasable ink. We believe that this fluorescence regulation strategy is promising for the construction of advanced fluorescent organic materials.

Gaze Estimation Based on Convolutional Structure and Sliding Window-Based Attention Mechanism.

The direction of human gaze is an important indicator of human behavior, reflecting the level of attention and cognitive state towards various visual stimuli in the environment. Convolutional neural networks have achieved good performance in gaze estimation tasks, but their global modeling capability is limited, making it difficult to further improve prediction performance. In recent years, transformer models have been introduced for gaze estimation and have achieved state-of-the-art performance. However, their slicing-and-mapping mechanism for processing local image patches can compromise local spatial information. Moreover, the single down-sampling rate and fixed-size tokens are not suitable for multiscale feature learning in gaze estimation tasks. To overcome these limitations, this study introduces a Swin Transformer for gaze estimation and designs two network architectures: a pure Swin Transformer gaze estimation model (SwinT-GE) and a hybrid gaze estimation model that combines convolutional structures with SwinT-GE (Res-Swin-GE). SwinT-GE uses the tiny version of the Swin Transformer for gaze estimation. Res-Swin-GE replaces the slicing-and-mapping mechanism of SwinT-GE with convolutional structures. Experimental results demonstrate that Res-Swin-GE significantly outperforms SwinT-GE, exhibiting strong competitiveness on the MpiiFaceGaze dataset and achieving a 7.5% performance improvement over existing state-of-the-art methods on the Eyediap dataset.

Multi-Layer Printable Lithium Ion Micro-Batteries with Remarkable Areal Energy Density and Flexibility for Wearable Smart Electronics.

Pursuing high areal energy density and developing scalable fabrication strategies of micro-batteries are the key for the progressive printed microelectronics. Herein, the scalable fabrication of multi-layer printable lithium ion micro-batteries (LIMBs) with ultrahigh areal energy density and exceptional flexibility is reported, based on highly conductive and mechanically stable inks by fully incorporating the polyurethane binders in dibasic esters with high-conducting additives of graphene and carbon nanotubes into active materials to construct a cross-linked conductive network. Benefiting from relatively higher electrical conductivity (≈7000 mS cm-1 ) and stably connected network of microelectrodes, the as-fabricated LIMBs by multi-layer printing display robust areal capacity of 398 µAh cm-2 , and remarkable areal energy density of 695 µWh cm-2 , which are much higher than most LIMBs reported. Further, the printed LIMBs show notable capacity retention of 88% after 3000 cycles, and outstanding flexibility without any structure degradation under various torsion states and folding angles. Importantly, a wearable smart bracelet, composed of a serially connected LIMBs pack, a temperature sensor, and a light-emitting diode, is realized for the automatic detection of body temperature. Therefore, this strategy of fabricating highly conductive and mechanically stable printable ink will open a new avenue for developing high-performance printable LIMBs for smart microelectronics.

Prominent antibacterial effect of sub 5 nm Cu nanoparticles/MoS2composite under visible light.

Achieving an efficient and inexpensive bactericidal effect is a key point for the design of antibacterial agent. Recent advances have proved molybdenum disulfide (MoS2) as a promising platform for antimicrobial applications, while the combination of metal nanoparticle would promote the antibacterial efficiency. Nevertheless, the dispersivity, cheapness and safety of metal nanoparticle loaded on MoS2raised some concerns. In this paper, we successfully realized a uniform decoration of copper nanoparticles (CuNPs) on surface of MoS2nanosheets, and the size of CuNPs could be controlled below 5 nm. Under 5 min irradiation of 660 nm visible light, the synthesized CuNPs/MoS2composite demonstrated superior antibacterial performances (almost 100% bacterial killed) towards both Gram-negativeE. coliand Gram-positiveS. aureusover the single component (Cu or MoS2), while the bactericidal effect could last for at least 6 h. The synergism of photodynamic generated hydroxyl radical (·OH), oxidative stress without reactive oxygen species production and the release of Cu ions was considered as the mechanism for the antibacterial properties of CuNPs/MoS2. Our findings provided new insights into the development of two-dimensional antibacterial nanomaterials of high cost performance.

Organophosphate esters in edible marine fish: Tissue-specific distribution, species-specific bioaccumulation, and human exposure.

Although growing evidences have proved the wide presence of organophosphate esters (OPEs) in marine environments, information on the tissue- and species-specific accumulation characteristics of these emerging pollutants in wild marine fish and the associated human exposure risks are currently lacking. Eleven OPEs were comprehensively investigated for their occurrence and tissue accumulation in 15 marine fish species and their living environment matrices (seawater and sediment) from the Beibu Gulf. The OPE concentrations were statistically higher in the liver (17.6-177 ng/g ww, mean 90.9 ± 52.1 ng/g ww) than those of muscle tissues (2.04-22.9 ng/g ww, mean 10.6 ± 5.6 ng/g ww). Tris (phenyl) phosphate (TPHP) was the most predominant OPE congeners in fish liver, and tris(2-chloropropyl) phosphate (TCIPP) and tris(2-chloroethyl) phosphate (TCEP) were dominant OPEs in the muscle. The results suggested different OPE profiles occurred between the tissues. The median logarithmic bioaccumulation factors (BAFs) of TPHP in the muscle and liver, and TCEP in muscle were higher than the regulatory benchmark value (BCF >3.7), indicating very strong bioaccumulation. Carnivorous benthic fish appear to potentially accumulate TPHP, while pelagic and omnivory fish tend to accumulate TCIPP and TCEP. Except for proteins and phospholipids, no significant relationships were found between OPE levels and other biological properties of the studied fish. The results implied that the species-specific accumulation of OPEs mainly attributed to habitat and feeding habit rather than the difference of biochemical composition among species. Metabolism may have a significant effect on the bioaccumulation of OPEs in marine fish. The dietary risks of OPEs for consumers in different age groups ranged from 2.02 × 10-4 to 3.01 × 10-3, indicating relatively low human exposure risks from fish consumption.

Optimizing grazing exclusion duration for carbon sequestration in grasslands: Incorporating temporal heterogeneity of aboveground biomass and soil organic carbon.

Grasslands account for approximately one-third of the global terrestrial carbon stocks. However, a limited understanding of the impact of grazing exclusion on carbon storage in grassland ecosystems hinders progress towards restoring overgrazed grasslands and promoting carbon sequestration. In this study, we conducted a comprehensive meta-analysis to investigate the effects of grazing exclusion on aboveground biomass (AGB) and soil organic carbon (SOC) in four grasslands: alpine grasslands (AP), tropical savannas (TS), temperate subhumid grasslands (TG), and a semi-desert steppe (SD). Our meta-analysis indicated that grazing exclusion significantly enhanced carbon sequestration in grassland ecosystems, and the benefits of carbon sequestration were most pronounced in the AP, followed by the TG, SD, and TS. Grazing exclusion duration (DUR) was a significant factor associated with the response of aboveground biomass (AGB) and soil organic carbon (SOC) to grazing exclusion. Moreover, the relationships between AGB and DUR were nonlinear, with existence thresholds of 18, 21, 12, 19, and 23 years in global grasslands (ALL), AP, TS, TG, and SD, respectively. However, the relationship between SOC and DUR was linear, with SOC continuing to increase as DUR increased (up to 40 years). The multi-objective optimization indicated that the optimal duration of grazing exclusion for grassland carbon sequestration was 18-20, 21-23, 12-14, 19-21, and 23-25 years for ALL, AP, TS, TG, and SD, respectively. Our study contributes to the enhancement of grazing management and offers better options for increasing carbon sequestration in grasslands.

2.4 V ultrahigh-voltage aqueous MXene-based asymmetric micro-supercapacitors with high volumetric energy density toward a self-sufficient integrated microsystem.

Two-dimensional MXenes are key high-capacitance electrode materials for micro-supercapacitors (MSCs) catering to integrated microsystems. However, the narrow electrochemical voltage windows of conventional aqueous electrolytes (≤ 1.23 V) and symmetric MXene MSCs (typically ≤ 0.6 V) substantially limit their output voltage and energy density. Highly concentrated aqueous electrolytes exhibit lower water molecule activity, which inhibits water splitting and consequently widens the operating voltage window. Herein, we report ultrahigh-voltage aqueous planar asymmetric MSCs (AMSCs) based on a highly concentrated LiCl-gel quasi-solid-state electrolyte with MXene (Ti3C2T x ) as the negative electrode and MnO2 nanosheets as the positive electrode (MXene//MnO2-AMSCs). The MXene//MnO2-AMSCs exhibit a high voltage of up to 2.4 V, attaining an ultrahigh volumetric energy density of 53 mWh cm-3. Furthermore, the in-plane geometry and the quasi-solid-state electrolyte enabled excellent mechanical flexibility and performance uniformity in the serially/parallel connected packs of our AMSCs. Notably, the MXene//MnO2-AMSC-based integrated microsystem, in conjunction with solar cells and consumer electronics, could efficiently realize simultaneous energy harvesting, storage, and conversion. The findings of this study provide insights for constructing high-voltage aqueous MXene-based AMSCs as safe and self-sufficient micropower sources in smart integrated microsystems.

Rational design of triazine-based conjugated polymers with enhanced charge separation ability for photocatalytic hydrogen evolution.

Triazine-based conjugated polymers (TCPs) are promising organic catalysts for green H2 production, since their photocatalytic performance can be easily regulated via appropriate molecular design. However, apart from weak absorption of visible light, weak charge separation and transport abilities also considerably restrict the photocatalytic performance of TCPs. Herein, we report two novel TCP photocatalysts with donor-acceptor (D-A) and donor-π-acceptor (D-π-A) structures using dibenzo[g,p]chrysene (Dc), thiophene (T), and 2,4,6-triphenyl-1,3,5-triazine (Tz) as the donor, π-spacer, and acceptor, respectively. Compared to Dc-Tz with a D-A structure, Dc-T-Tz exhibits a broader light absorption edge and more efficient charge separation and transmission due to its D-π-A structure and strong dipole effect. These properties enable Dc-T-Tz to display a prominent H2 production rate of 45.13 mmol h-1 g-1 under ultraviolet-visible (UV-Vis) light (λ > 300 nm). Therefore, Dc-T-Tz represents state-of-the-art TCP photocatalysts to date.

XTP8 Promotes Ovarian Cancer Progression by Activating AKT/AMPK/mTOR Pathway to Regulate EMT.

Ovarian cancer (OC) ranks as the fifth leading cause of cancer-related death in women. The main contributors to the poor prognosis of ovarian cancer are the high rates of recurrence and metastasis. Studies have indicated a crucial role for hepatitis B virus X Ag-Transactivated Protein 8 (XTP8), a protein containing the DEP domain, in various cellular processes, including cell growth, movement, and differentiation, across several types of cancers. However, the role of XTP8 in ovarian cancer remains unclear. We observed elevated expression of XTP8 in ovarian cancer. Silencing XTP8 inhibited cell proliferation, promoted apoptosis, and yielded contrasting results in cells overexpressing XTP8. Furthermore, XTP8 facilitated ovarian cancer invasion and migration, triggering epithelial-mesenchymal transition (EMT). Mechanistically, XTP8 silencing led to reduced phosphorylation levels of AKT, increased p-AMPK levels, and decreased p-mTOR levels, while XTP8 overexpression exerted the opposite effects. Additionally, the activation of p-AMPK rescued the promoting effect of XTP8 on EMT in ovarian cancer cell lines, indicating that XTP8 acts as an oncogene by modulating the AKT/AMPK/mTOR pathway. Through transcriptome sequencing to identify downstream targets of XTP8, we found that XTP8 influences the expression of Caldesmon (CALD1) at both transcriptional and translational levels. CALD1 can be considered a downstream target of XTP8. The collaborative action of XTP8 and CALD1 activates the AKT/AMPK/mTOR pathway, regulating EMT to promote ovarian cancer progression. Inhibiting this signaling axis might represent a potential therapeutic target for ovarian cancer.

SALVIANOLIC ACID A ATTENUATES ANGIOTENSIN II-INDUCED CARDIAC FIBROSIS THROUGH REGULATING THE TXNIP SIGNALING PATHWAY.

ABSTRACT: Cardiac fibrosis, characterized by excessive collagen accumulation in heart tissues, poses a significant clinical challenge in various heart diseases and complications. Although salvianolic acid A (Sal A) from Danshen ( Salvia miltiorrhiza ) has shown promise in the treatment of ischemic heart disease, myocardial infarction, and atherosclerosis, its effects on cardiac fibrosis remain unexplored. Our study investigated the efficacy of Sal A in reducing cardiac fibrosis and elucidated its underlying molecular mechanisms. We observed that Sal A demonstrated significant cardioprotective effects against Angiotensin II (Ang II)-induced cardiac remodeling and fibrosis, showing a dose-dependent reduction in fibrosis in mice and suppression of cardiac fibroblast proliferation and fibrotic protein expression in vitro . RNA sequencing revealed that Sal A counteracted Ang II-induced upregulation of Txnip, and subsequent experiments indicated that it acts through the inflammasome and ROS pathways. These findings establish the antifibrotic effects of Sal A, notably attenuated by Txnip overexpression, and highlight its significant role in modulating inflammation and oxidative stress pathways. This underscores the importance of further research on Sal A and similar compounds, especially regarding their effects on inflammation and oxidative stress, which are key factors in various cardiovascular diseases.

The status and challenging perspectives of 3D-printed micro-batteries.

In the era of the Internet of Things and wearable electronics, 3D-printed micro-batteries with miniaturization, aesthetic diversity and high aspect ratio, have emerged as a recent innovation that solves the problems of limited design diversity, poor flexibility and low mass loading of materials associated with traditional power sources restricted by the slurry-casting method. Thus, a comprehensive understanding of the rational design of 3D-printed materials, inks, methods, configurations and systems is critical to optimize the electrochemical performance of customizable 3D-printed micro-batteries. In this review, we offer a key overview and systematic discussion on 3D-printed micro-batteries, emphasizing the close relationship between printable materials and printing technology, as well as the reasonable design of inks. Initially, we compare the distinct characteristics of various printing technologies, and subsequently emphatically expound the printable components of micro-batteries and general approaches to prepare printable inks. After that, we focus on the outstanding role played by 3D printing design in the device architecture, battery configuration, performance improvement, and system integration. Finally, the future challenges and perspectives concerning high-performance 3D-printed micro-batteries are adequately highlighted and discussed. This comprehensive discussion aims at providing a blueprint for the design and construction of next-generation 3D-printed micro-batteries.

A study on the performance, structure, composition, and release behavior changes of polybutylene adipate terephthalic acid (PBAT) film during food contact.

Polybutylene adipate terephthalic acid (PBAT) is an emerging biodegradable material in food packaging. However, concerns have been raised regarding the potential hazards it could pose to food safety. In this study, the changes of PBAT films during food contact and the release of small molecules were inestigated by a multiscale approach. On a macro-scale, the surface roughness of the films increased with the reduction in the concentration of food simulants and the increase in contact temperatures, especially after immersion in acidic food environments. On a micro-scale, the crystallinity (Xc) and degradation indexes (DI) of the films increased by 5.7-61.2% and 7.8-48.6%, respectively, which led to a decrease in thermal stability. On a scale approaching the molecular level, 2,4-di-tert-butylphenol (2,4-DTBP) was detected by gas chromatography-mass spectrometry (GC-MS/MS) with the highest migration content, and the release behavior of 2,4-DTBP was further investigated by migration kinetics. In addition, terephthalic acid (TPA), a hydrolysis product of PBAT, was detected in acidic food environments by liquid chromatography-mass spectrometry (LC-MS/MS). The results of this study could provide practical guidance and assistance to promote sustainable development in the field of food packaging.

An Intense Out-of-Season Rebound of Influenza Activity After the Relaxation of Coronavirus Disease 2019 Restrictions in Beijing, China.

Background: The aim of this study was to investigate the changes of epidemic characteristics of influenza activity pre- and post-coronavirus disease 2019 (COVID-19) in Beijing, China. Methods: Epidemiologic data were collected from the influenza surveillance system in Beijing. We compared epidemic intensity, epidemic onset and duration, and influenza transmissibility during the 2022-2023 season with pre-COVID-19 seasons from 2014 to 2020. Results: The overall incidence rate of influenza in the 2022-2023 season was significantly higher than that of the pre-COVID-19 period, with the record-high level of epidemic intensity in Beijing. The onset and duration of the influenza epidemic period in 2022-2023 season was notably later and shorter than that of the 2014-2020 seasons. Maximum daily instantaneous reproduction number (Rt) of the 2022-2023 season (Rt = 2.31) was much higher than that of the pre-COVID-19 period (Rt = 1.49). The incidence of influenza A(H1N1) and A(H3N2) were the highest among children aged 0-4 years and 5-14 years, respectively, in the 2022-2023 season. Conclusions: A late, intense, and short-term peak influenza activity was observed in the 2022-2023 season in Beijing. Children <15 years old were impacted the most by the interruption of influenza circulation during the COVID-19 pandemic. Maintaining continuous surveillance and developing targeted public health strategies of influenza is necessary.

Photo- and Oxygen- Synergistically Controlled Selective Expression of Organic Phosphorescence Units.

Dynamic control of ultralong organic room-temperature phosphorescence (UORTP) is a charming target. Herein, we report a stimuli-responsive phosphorescence unit 7H-indolo[2,3-c]quinoline (NBCz) and its derivatives (PCBNBCz, FSO2NBCz, and N2BCzSO2NBCz) that show photo- and oxygen- synergistically induced afterglow activation and afterglow color change in the PMMA film. PCBNBCz and FSO2NBCz feature a donor-acceptor (D-A) structure, and N2BCzSO2NBCz features acceptor-bridged two different phosphorescence units (NBCz and N2BCz). The photoactivated UORTP of PCBNBCz and FSO2NBCz arises from the photoinduced consumption of oxygen in the PMMA film. It is clear that the phosphorescence unit NBCz contributes to subsequent photoinduced UORTP color change because the NBCz-doped PMMA film shows the same UORTP color change process. ESR and HRMS measurements confirmed that oxidation of NBCz occurs at the nitrogen atom of the quinoline ring via photogenerated superoxide radicals, which results in the UORTP color change. TDDFT calculations proved that after oxidation of NBCz, the T1 energy level declines significantly. Furthermore, photocontrolled selective expression of phosphorescence units is achieved in the case of N2BCzSO2NBCz. After further UV irradiation, oxidation of NBCz happened, and the oxidized form N2BCzSO2NBCz-O emitted the intrinsic orange UORTP of NBCz-O selectively and screened the intrinsic yellowish-green UORTP of N2BCz. Finally, multilevel photolithography can be demonstrated based on the photoactivated UORTP and the photoinduced UORTP color change. This work may give a deep insight into organic phosphorescence and pave a simple way for the development of stimulus-responsive smart UORTP materials.

Enhanced Mechanical Strength and Sustained Drug Release in Carrier-Free Silver-Coordinated Anthraquinone Natural Antibacterial Anti-Inflammatory Hydrogel for Infectious Wound Healing.

The persistent challenge of healing infectious wounds and the rise of bacterial resistance represent significant hurdles in contemporary medicine. In this study, based on the natural small molecule drug Rhein self-assembly to form hydrogels and coordinate assembly with silver ions (Ag+), a sustained-release carrier-free hydrogel with compact structure is constructed to promote the repair of bacterial-infected wounds. As a broad-spectrum antimicrobial agent, Ag+ can avoid the problem of bacterial resistance caused by the abuse of traditional antibiotics. In addition, due to the slow-release properties of Rhein hydrogel, continuous effective concentration of Ag+ at the wound site can be ensured. The assembly of Ag+ and Rhein makes the hydrogel system with enhanced mechanical stability. More importantly, it is found that Rhein effectively promotes skin tissue regeneration and wound healing by reprogramming M1 macrophages into M2 macrophages. Further mechanism studies show that Rhein realizes its powerful anti-inflammatory activity through NRF2/HO-1 activation and NF-κB inhibition. Thus, the hydrogel system combines the excellent antibacterial properties of Ag+ with the excellent anti-inflammatory and tissue regeneration ability of Rhein, providing a new strategy for wound management with dual roles.

High-Voltage MXene-Based Supercapacitors: Present Status and Future Perspectives.

As an emerging class of 2D materials, MXene exhibits broad prospects in the field of supercapacitors (SCs). However, the working voltage of MXene-based SCs is relatively limited (typically ≤ 0.6 V) due to the oxidation of MXene electrode and the decomposition of electrolyte, ultimately leading to low energy density of the device. To solve this issue, high-voltage MXene-based electrodes and corresponding matchable electrolytes are developed urgently to extend the voltage window of MXene-based SCs. Herein, a comprehensive overview and systematic discussion regarding the effects of electrolytes (aqueous, organic, and ionic liquid electrolytes), asymmetric device configuration, and material modification on the operating voltage of MXene-based SCs, is presented. A deep dive is taken into the latest advances in electrolyte design, structure regulation, and high-voltage mechanism of MXene-based SCs. Last, the future perspectives on high-voltage MXene-based SCs and their possible development directions are outlined and discussed in depth, providing new insights for the rational design and realization of advanced next-generation MXene-based electrodes and high-voltage electrolytes.