Pressure promoted low-temperature melting of metal-organic frameworks.

Metal-organic frameworks (MOFs) are microporous materials with huge potential for chemical processes. Structural collapse at high pressure, and transitions to liquid states at high temperature, have recently been observed in the zeolitic imidazolate framework (ZIF) family of MOFs. Here, we show that simultaneous high-pressure and high-temperature conditions result in complex behaviour in ZIF-62 and ZIF-4, with distinct high- and low-density amorphous phases occurring over different regions of the pressure-temperature phase diagram. In situ powder X-ray diffraction, Raman spectroscopy and optical microscopy reveal that the stability of the liquid MOF state expands substantially towards lower temperatures at intermediate, industrially achievable pressures and first-principles molecular dynamics show that softening of the framework coordination with pressure makes melting thermodynamically easier. Furthermore, the MOF glass formed by melt quenching the high-temperature liquid possesses permanent, accessible porosity. Our results thus imply a route to the synthesis of functional MOF glasses at low temperatures, avoiding decomposition on heating at ambient pressure.

Structural Ordering in Liquid Gallium under Extreme Conditions.

The atomic-scale structure, melting curve, and equation of state of liquid gallium has been measured to high pressure (p) and high temperature (T) up to 26 GPa and 900 K by in situ synchrotron x-ray diffraction. Ab initio molecular dynamics simulations up to 33.4 GPa and 1000 K are in excellent agreement with the experimental measurements, providing detailed insight at the level of pair distribution functions. The results reveal an absence of dimeric bonding in the liquid state and a continuous increase in average coordination number n[over ¯]_{Ga}^{Ga} from 10.4(2) at 0.1 GPa approaching ∼12 by 25 GPa. Topological cluster analysis of the simulation trajectories finds increasing fractions of fivefold symmetric and crystalline motifs at high p-T. Although the liquid progressively resembles a hard-sphere structure towards the melting curve, the deviation from this simple description remains large (≥40%) across all p-T space, with specific motifs of different geometries strongly correlating with low local two-body excess entropy at high p-T.

Rich Polymorphism of a Metal-Organic Framework in Pressure-Temperature Space.

We present an in situ powder X-ray diffraction study on the phase stability and polymorphism of the metal-organic framework ZIF-4, Zn(imidazolate)2, at simultaneous high pressure and high temperature, up to 8 GPa and 600 °C. The resulting pressure-temperature phase diagram reveals four, previously unknown, high-pressure-high-temperature ZIF phases. The crystal structures of two new phases-ZIF-4-cp-II and ZIF-hPT-II-were solved by powder diffraction methods. The total energy of ZIF-4-cp-II was evaluated using density functional theory calculations and was found to lie in between that of ZIF-4 and the most thermodynamically stable polymorph, ZIF- zni. ZIF-hPT-II was found to possess a doubly interpenetrated diamondoid topology and is isostructural with previously reported Cd(Imidazolate)2 and Hg(Imidazolate)2 phases. This phase exhibited extreme resistance to both temperature and pressure. The other two new phases could be assigned with a unit cell and space group, although their structures remain unknown. The pressure-temperature phase diagram of ZIF-4 is strikingly complicated when compared with that of the previously investigated, closely related ZIF-62 and demonstrates the ability to traverse complex energy landscapes of metal-organic systems using the combined application of pressure and temperature.

Structural Behavior of Natural Silicate-Carbonate Spurrite Mineral, Ca5(SiO4)2(CO3), under High-Pressure, High-Temperature Conditions.

We report on high-pressure and high-temperature angle-dispersive synchrotron X-ray diffraction and high-pressure Raman data up to 27 GPa and 700 K for natural silicate carbonate Ca5(SiO4)2(CO3) spurrite mineral. No phase transition was found in the studied P-T range. The room-temperature bulk modulus of spurrite using Ne as the pressure-transmitting medium is B0 = 77(1) GPa with a first-pressure derivative of B0' = 5.9(2). The structure compression is highly anisotropic, the b axis being approximately 30% more compressible than the a and c axes. The volumetric thermal expansivity value around 8 GPa was estimated to be 4.1(3) × 10-5 K-1. A comparison with intimately related minerals CaCO3 calcite and aragonite and ß-Ca2SiO4 larnite shows that, as the composition and structural features of spurrite suggest, its compressibility and thermal expansivity lie between those of the silicate and carbonate end members. The crystal chemistry and thermodynamic properties of spurrite are discussed.

High-Pressure High-Temperature Stability and Thermal Equation of State of Zircon-Type Erbium Vanadate.

The zircon to scheelite phase boundary of ErVO4 has been studied by high-pressure and high-temperature powder and single-crystal X-ray diffraction. This study has allowed us to delimit the best synthesis conditions of its scheelite-type phase, determine the ambient-temperature equation of state of the zircon and scheelite-type structures, and obtain the thermal equation of state of the zircon-type polymorph. The results obtained with powder samples indicate that zircon-type ErVO4 transforms to scheelite at 8.2 GPa and 293 K and at 7.5 GPa and 693 K. The analyses yield bulk moduli K0 of 158(13) GPa for the zircon phase and 158(17) GPa for the scheelite phase, with a temperature derivative of d K0/d T = -[3.8(2)] × 10-3 GPa K-1 and a volumetric thermal expansion of α0 = [0.9(2)] × 10-5 K-1 for the zircon phase according to the Berman model. The results are compared with those of other zircon-type vanadates, raising the need for careful experiments with highly crystalline scheelite to obtain reliable bulk moduli of this phase. Finally, we have performed single-crystal diffraction experiments from 110 to 395 K, and the obtained volumetric thermal expansion (α0) for zircon-type ErVO4 in the 300-395 K range is [1.4(2)] × 10-5 K-1, in good agreement with previous data and with our experimental value given from the thermal equation of state fit within the limits of uncertainty.

An Ultrahigh CO2-Loaded Silicalite-1 Zeolite: Structural Stability and Physical Properties at High Pressures and Temperatures.

We report the formation of an ultrahigh CO2-loaded pure-SiO2 silicalite-1 structure at high pressure (0.7 GPa) from the interaction of empty zeolite and fluid CO2 medium. The CO2-filled structure was characterized in situ by means of synchrotron powder X-ray diffraction. Rietveld refinements and Fourier recycling allowed the location of 16 guest carbon dioxide molecules per unit cell within the straight and sinusoidal channels of the porous framework to be analyzed. The complete filling of pores by CO2 molecules favors structural stability under compression, avoiding pressure-induced amorphization below 20 GPa, and significantly reduces the compressibility of the system compared to that of the parental empty one. The structure of CO2-loaded silicalite-1 was also monitored at high pressures and temperatures, and its thermal expansivity was estimated.

Author Correction: Thermal equation of state of ruthenium characterized by resistively heated diamond anvil cell.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Thermal equation of state of ruthenium characterized by resistively heated diamond anvil cell.

The high-pressure and high-temperature structural and chemical stability of ruthenium has been investigated via synchrotron X-ray diffraction using a resistively heated diamond anvil cell. In the present experiment, ruthenium remains stable in the hcp phase up to 150 GPa and 960 K. The thermal equation of state has been determined based upon the data collected following four different isotherms. A quasi-hydrostatic equation of state at ambient temperature has also been characterized up to 150 GPa. The measured equation of state and structural parameters have been compared to the results of ab initio simulations performed with several exchange-correlation functionals. The agreement between theory and experiments is generally quite good. Phonon calculations were also carried out to show that hcp ruthenium is not only structurally but also dynamically stable up to extreme pressures. These calculations also allow the pressure dependence of the Raman-active E2g mode and the silent B1g mode of Ru to be determined.

Post-tilleyite, a dense calcium silicate-carbonate phase.

Calcium carbonate is a relevant constituent of the Earth's crust that is transferred into the deep Earth through the subduction process. Its chemical interaction with calcium-rich silicates at high temperatures give rise to the formation of mixed silicate-carbonate minerals, but the structural behavior of these phases under compression is not known. Here we report the existence of a dense polymorph of Ca5(Si2O7)(CO3)2 tilleyite above 8 GPa. We have structurally characterized the two phases at high pressures and temperatures, determined their equations of state and analyzed the evolution of the polyhedral units under compression. This has been possible thanks to the agreement between our powder and single-crystal XRD experiments, Raman spectroscopy measurements and ab-initio simulations. The presence of multiple cation sites, with variable volume and coordination number (6-9) and different polyhedral compressibilities, together with the observation of significant amounts of alumina in compositions of some natural tilleyite assemblages, suggests that post-tilleyite structure has the potential to accommodate cations with different sizes and valencies.

The Use of Microtechnology to Monitor Collision Performance in Professional Rugby Union.

PURPOSE: To determine if microtechnology-derived collision loads discriminate between collision performance and compare the physical and analytical components of collision performance between positional groups. METHODS: Thirty-seven professional male rugby union players participated in this study. Collision events from 11 competitive matches were coded using specific tackle and carry classifications based on the ball-carrier's collision outcome. Collisions were automatically detected using 10 Hz microtechnology units. Collision events were identified, coded (as tackle or carry), and timestamped at the collision contact point using game analysis software. Attacking and defensive performances of 1609 collision events were analyzed. RESULTS: Collision loads were significantly greater during dominant compared with neutral and passive collisions (P < .001; effect size [ES] = 0.53 and 0.80, respectively), tackles (P < .0001; ES = 0.60 and 0.56, respectively), and carries (P < .001; ES = 0.48 and 0.79, respectively). Overall, forwards reported a greater number and frequency of collisions but lower loads per collision and velocities at collision point than did backs. Microtechnology devices can also accurately, sensitively, and specifically identify collision events (93.3%, 93.8%, and 92.8%, respectively). CONCLUSION: Microtechnology is a valid means of discriminating between tackle and carry performance. Thus, microtechnology-derived collision load data can be utilized to track and monitor collision events in training and games.