RESUMO
Cell-cell interactions are important to numerous biological systems, including tissue microenvironments, the immune system, and cancer. However, current methods for studying cell combinations and interactions are limited in scalability, allowing just hundreds to thousands of multicell assays per experiment; this limited throughput makes it difficult to characterize interactions at biologically relevant scales. Here, we describe a paradigm in cell interaction profiling that allows accurate grouping of cells and characterization of their interactions for tens to hundreds of thousands of combinations. Our approach leverages high-throughput droplet microfluidics to construct multicellular combinations in a deterministic process that allows inclusion of programmed reagent mixtures and beads. The combination droplets are compatible with common manipulation and measurement techniques, including imaging, barcode-based genomics, and sorting. We demonstrate the approach by using it to enrich for chimeric antigen receptor (CAR)-T cells that activate upon incubation with target cells, a bottleneck in the therapeutic T cell engineering pipeline. The speed and control of our approach should enable valuable cell interaction studies.
Assuntos
Bioensaio/métodos , Comunicação Celular/fisiologia , Técnicas Analíticas Microfluídicas/métodos , Microfluídica/métodos , Animais , Comunicação Celular/genética , Genômica/métodos , HumanosRESUMO
Gene therapy using viral vectors has been licensed for clinical use both in the European Union and the United States. Lentivectors (LV) and adeno-associated vectors (AAV) are two promising and FDA approved gene-therapy viral vectors. Many future applications of these vectors will benefit from targeting specific regions of interest within the body. Therefore, building on the early success of these vectors may depend on finding effective delivery systems to localize therapeutic administration. Degradable alginate hydrogels have been tested as appealing delivery vehicles for the controlled delivery of vector payloads. In this study, we compare the ability of two different degradable alginate hydrogel formulations to efficiently deliver LV and AAV. We propose that release rates of viral vectors are dependent on the physical properties of both the hydrogels and vectors. Here, we demonstrate that the initial strength and degradation rate of alginate hydrogels provides levers of control for tuning LV release but do not provide control in the release of AAV. While both alginate formulations used showed sustained release of both LV and AAV, LV release was shown to be dependent on alginate hydrogel degradation, while AAV release was largely governed by diffusive mechanisms. Altogether, this study demonstrates alginate's use as a possible delivery platform for LV and, for the first time, AAV - highlighting the potential of injectable degradable alginate hydrogels to be used as a versatile delivery tool in gene therapy applications.
Assuntos
Alginatos/química , Dependovirus/química , Dependovirus/genética , Portadores de Fármacos/química , Vetores Genéticos/química , Vetores Genéticos/genética , Hidrogéis/química , Cápsulas , Terapia Genética , Células HEK293 , HumanosRESUMO
Alginate hydrogels are widely used as delivery vehicles due to their ability to encapsulate and release a wide range of cargos in a gentle and biocompatible manner. The release of encapsulated therapeutic cargos can be promoted or stunted by adjusting the hydrogel physiochemical properties. However, the release from such systems is often skewed towards burst-release or lengthy retention. To address this, we hypothesized that the overall magnitude of burst release could be adjusted by combining microgels with distinct properties and release behavior. Microgel suspensions were generated using a process we have termed on-chip polymer blending to yield composite suspensions of a range of microgel formulations. In this manner, we studied how alginate percentage and degradation relate to the release of lentivectors. Whereas changes in alginate percentage had a minimal impact on lentivector release, microgel degradation led to a 3-fold increase, and near complete release, over 10â¯days. Furthermore, by controlling the amount of degradable alginate present within microgels the relative rate of release can be adjusted. A degradable formulation of microgels was used to deliver vascular endothelial growth factor (VEGF)-encoding lentivectors in the chick chorioallantoic membrane (CAM) assay and yielded a proangiogenic response in comparison to the same lentivectors delivered in suspension. The utility of blended microgel suspensions may provide an especially appealing platform for the delivery of lentivectors or similarly sized therapeutics. STATEMENT OF SIGNIFICANCE: Genetic therapeutics hold considerable potential for the treatment of diseases and disorders including ischemic cardiovascular diseases. To realize this potential, genetic vectors must be precisely and efficiently delivered to targeted regions of the body. However, conventional methods of delivery do not provide sufficient spatial and temporal control. Here, we demonstrate how alginate microgels provide a basis for developing systems for controlled genetic vector release. We adjust the physiochemical properties of alginate for quicker or slower release, and we demonstrate how combining distinct formulations of microgels can tune the release of the overall composite microgel suspension. These composite suspensions are generated using a straightforward and powerful application of droplet microfluidics which allows for the real-time generation of a composite suspension.
Assuntos
Técnicas de Transferência de Genes , Vetores Genéticos , Dispositivos Lab-On-A-Chip , Lentivirus , Fator A de Crescimento do Endotélio Vascular , Animais , Embrião de Galinha , Membrana Corioalantoide/irrigação sanguínea , Membrana Corioalantoide/metabolismo , Géis , Células HEK293 , Humanos , Neovascularização Fisiológica , Fator A de Crescimento do Endotélio Vascular/biossíntese , Fator A de Crescimento do Endotélio Vascular/genéticaRESUMO
Gene therapy is a promising strategy for musculoskeletal tissue repair and regeneration where local and sustained expression of proteins and/or therapeutic nucleic acids can be achieved. However, the musculoskeletal tissues present unique engineering and biological challenges as recipients of genetic vectors. Targeting specific cell populations, regulating expression in vivo, and overcoming the harsh environment of damaged tissue accompany the general concerns of safety and efficacy common to all applications of gene therapy. In this review, we will first summarize these challenges and then discuss how biomaterial carriers for genetic vectors can address these issues. Second, we will review how limitations specific to given vectors further motivate the utility of biomaterial carriers. Finally, we will discuss how these concepts have been combined with tissue engineering strategies and approaches to improve the delivery of these vectors for musculoskeletal tissue regeneration.
Assuntos
Engenharia Tecidual , Materiais Biocompatíveis , Técnicas de Transferência de Genes , Terapia Genética , Vetores Genéticos , HumanosRESUMO
Sphingosine-1-phosphate (S1P), a bioactive lipid, is a potent candidate for treatment of ischemic vascular disease. However, designing biomaterial systems for the controlled release of S1P to achieve therapeutic angiogenesis presents both biological and engineering challenges. Thus, the objective of this study was to design a hydrogel system that provides controlled and sustained release of S1P to establish local concentration gradients that promote neovascularization. Alginate hydrogels have been extensively studied and characterized for delivery of proangiogenic factors. We sought to explore if chitosan (0, 0.1, 0.5, or 1%) incorporation could be used as a means to control S1P release from alginate hydrogels. With increasing chitosan incorporation, hydrogels exhibited significantly denser pore structure and stiffer material properties. While 0.1 and 0.5% chitosan gels demonstrated slower respective release of S1P, release from 1% chitosan gels was similar to alginate gels alone. Furthermore, 0.5% chitosan gels induced greater sprouting and directed migration of outgrowth endothelial cells (OECs) in response to released S1P under hypoxia in vitro. Overall, this report presents a platform for a novel alginate-chitosan hydrogel of controlled composition and in situ gelation properties that can be used to control lipid release for therapeutic applications.
Assuntos
Alginatos , Quitosana , Células Endoteliais da Veia Umbilical Humana/metabolismo , Hidrogéis , Lisofosfolipídeos , Neovascularização Fisiológica/efeitos dos fármacos , Esfingosina/análogos & derivados , Alginatos/química , Alginatos/farmacocinética , Alginatos/farmacologia , Células Cultivadas , Quitosana/química , Quitosana/farmacocinética , Quitosana/farmacologia , Preparações de Ação Retardada/química , Preparações de Ação Retardada/farmacocinética , Preparações de Ação Retardada/farmacologia , Ácido Glucurônico/química , Ácido Glucurônico/farmacocinética , Ácido Glucurônico/farmacologia , Ácidos Hexurônicos/química , Ácidos Hexurônicos/farmacocinética , Ácidos Hexurônicos/farmacologia , Humanos , Hidrogéis/química , Hidrogéis/farmacocinética , Hidrogéis/farmacologia , Lisofosfolipídeos/química , Lisofosfolipídeos/farmacocinética , Lisofosfolipídeos/farmacologia , Esfingosina/química , Esfingosina/farmacocinética , Esfingosina/farmacologiaRESUMO
Lentivectors are widely used for gene delivery and have been increasingly tested in clinical trials. However, achieving safe, localized, and sufficient gene expression remain key challenges for effective lentivectoral therapy. Localized and efficient gene expression can be promoted by developing material systems to deliver lentivectors. Here, we address the utility of microgel encapsulation as a strategy for the controlled release of lentivectors. Three distinct routes for ionotropic gelation of alginate were incorporated into microfluidic templating to create lentivector-loaded microgels. Comparisons of the three microgels revealed marked differences in mechanical properties, crosslinking environment, and ultimately lentivector release and functional gene expression in vitro. Gelation with chelated calcium demonstrated low utility for gene delivery due to a loss of lentivector function with acidic gelation conditions. Both calcium carbonate gelation, and calcium chloride gelation, preserved lentivector function with a more sustained transduction and gene expression over 4 days observed with calcium chloride gelated microgels. The validation of these two strategies for lentivector microencapsulation may provide a platform for controlled gene delivery.
RESUMO
Hydrogels are an especially appealing class of biomaterials for gene delivery vehicles as they can be introduced into the body with minimally invasive procedures and are often applied in tissue engineering and regenerative medicine strategies. In this study, we show for the first time the use of an injectable alginate hydrogel for controlled delivery of lentivectors in the skeletal muscle of murine hindlimb. We propose to alter the release rates of lentivectors through manipulation of the molecular weight distribution of alginate hydrogels. The release of lentivector was tested using two different ratios of low and high molecular weight (MW) alginate polymers (75/25 and 25/75 low/high MW). The interdependency of lentivector release rate and alginate degradation rate was assessed in vitro. Lentivector-loaded hydrogels maintained transduction potential for up to one week in vitro as demonstrated by the continual transduction of HEK-293T cells. Injection of lentivector-loaded hydrogel in vivo led to a sustained level of transgene expression for more than two months while minimizing the copies of lentivirus genome inserted into the genome of murine skeletal muscle cells. This strategy of spatiotemporal control of lentivector delivery from alginate hydrogels may provide a versatile tool to combine gene therapy and biomaterials for applications in regenerative medicine.