Histological and histomorphometric analysis of bone tissue using customized titanium meshes with or without resorbable membranes: A randomized clinical trial.

OBJECTIVES: To date, no clinical studies have investigated the effect of using resorbable collagen membrane in conjunction with customized titanium mesh to promote bone formation in guided bone regeneration. Therefore, a non-inferiority analysis (one-sided 95% CI approach) was designed to compare the augmented bone gained using meshes with and without collagen membranes, through histological and histomorphometric investigations. MATERIALS AND METHODS: Thirty patients undergoing bone augmentation procedures at both maxillary and mandible sites were randomly treated with customized titanium meshes alone (M-, n = 15) or covered with resorbable membrane (M+, n = 15), in both cases filled with autogenous bone and xenograft. After 6 months of healing, bone tissue biopsies were taken from the augmented region. The bone tissue (B.Ar), grafting material (G.Ar), and non-mineralized tissue (NMT.Ar) areas were quantified through histomorphometric analysis, as were the osteoid area (O.Ar) and its width. RESULTS: Collagen membrane did not appear to significantly influence the investigated parameters: B.Ar, G.Ar, NMT.Ar, and O.Ar were similar between Group M- (34.3%, 11.5%, 54.1%, 1.95 µm2 , respectively) and Group M+ (35.3%, 14.6%, 50.2%, and 1.75 µm2 , respectively). Considering the overall population, significantly higher rates of newly formed bone were obtained in mandibular sites, while non-mineralized and dense connective tissue rates were higher in the maxilla (p < .05). CONCLUSIONS: The application of collagen membrane over titanium mesh did not lead to significant results. Bone formation appeared significantly different in the maxilla compared with the mandible. Additional studies are required to further investigate the issues observed.

A 3D micro-CT assessment of composition and structure of bone tissue after vertical and horizontal alveolar ridge augmentation using CAD/CAM-customized titanium mesh.

OBJECTIVES: To date, no studies have exploited micro-CT in humans to evaluate bone morphology and structure after bone augmentation with CAD/CAM-customized titanium mesh, in mandible and maxilla. The aim of this study was to assess the composition and microstructure of bone biopsy through micro-CT analysis. MATERIALS AND METHODS: Bone augmentation at both maxillary and mandible sites was performed on 30 patients randomly treated with customized mesh, either alone (M-) or covered with resorbable membrane (M+), in both cases filled 50:50 with autogenous bone and xenograft. After 6 months, biopsies were taken and micro-CT was performed on consecutive 1-mm-thick VOIs from coronal to apical side, measuring tissue volumes, trabecular thickness, spacing, and number. RESULTS: In both groups, irrespective of membrane use, bone tissue (M-: 29.76% vs. M+: 30.84%) and residual graft material (M-: 14.87% vs. M+: 13.11%) values were similar. Differences were site-related (maxillary vs. mandibular) with higher percentage of bone tissue and trabecular density of low-mineralized bone and overall bone in the mandible. CONCLUSIONS: The composition and structure of bone tissue, as assessed by micro-CT after alveolar ridge augmentation using CAD/CAM-customized titanium meshes, showed similar features regardless of whether a collagen membrane was applied.

An Advanced Human Bone Tissue Culture Model for the Assessment of Implant Osteointegration In Vitro.

In the field of biomaterials for prosthetic reconstructive surgery, there is the lack of advanced innovative methods to investigate the potentialities of smart biomaterials before in vivo tests. Despite the complex osteointegration process being difficult to recreate in vitro, this study proposes an advanced in vitro tissue culture model of osteointegration using human bone. Cubic samples of trabecular bone were harvested, as waste material, from hip arthroplasty; inner cylindrical defects were created and assigned to the following groups: (1) empty defects (CTRneg); (2) defects implanted with a cytotoxic copper pin (CTRpos); (3) defects implanted with standard titanium pins (Ti). Tissues were dynamically cultured in mini rotating bioreactors and assessed weekly for viability and sterility. After 8 weeks, immunoenzymatic, microtomographic, histological, and histomorphometric analyses were performed. The model was able to simulate the effects of implantation of the materials, showing a drop in viability in CTR+, while Ti appears to have a trophic effect on bone. MicroCT and a histological analysis supported the results, with signs of matrix and bone deposition at the Ti implant site. Data suggest the reliability of the tested model in recreating the osteointegration process in vitro with the aim of reducing and refining in vivo preclinical models.

RNA Extraction from Cartilage: Issues, Methods, Tips.

The increase in degenerative diseases involving articular cartilage has pushed research to focus on their pathogenesis and treatment, exploiting increasingly complex techniques. Gene expression analyses from tissue are representative of the in vivo situation, but the protocols to be applied to obtain a reliable analysis are not completely cleared through customs. Thus, RNA extraction from fresh samples and specifically from musculoskeletal tissue such as cartilage is still a challenging issue. The aim of the review is to provide an overview of the techniques described in the literature for RNA extraction, highlighting limits and possibilities. The research retrieved 65 papers suitable for the purposes. The results highlighted the great difficulty in comparing the different studies, both for the sources of tissue used and for the techniques employed, as well as the details about protocols. Few papers compared different RNA extraction methods or homogenization techniques; the case study reported by authors about RNA extraction from sheep cartilage has not found an analog in the literature, confirming the existence of a relevant blank on studies about RNA extraction from cartilage tissue. However, the state of the art depicted can be used as a starting point to improve and expand studies on this topic.

Bone Regeneration Guided by a Magnetized Scaffold in an Ovine Defect Model.

The reconstruction of large segmental defects still represents a critical issue in the orthopedic field. The use of functionalized scaffolds able to create a magnetic environment is a fascinating option to guide the onset of regenerative processes. In the present study, a porous hydroxyapatite scaffold, incorporating superparamagnetic Fe3O4 nanoparticles (MNPs), was implanted in a critical bone defect realized in sheep metatarsus. Superparamagnetic nanoparticles functionalized with hyperbranched poly(epsilon-Lysine) peptides and physically complexed with vascular endothelial growth factor (VEGF) where injected in situ to penetrate the magnetic scaffold. The scaffold was fixed with cylindrical permanent NdFeB magnets implanted proximally, and the magnetic forces generated by the magnets enabled the capture of the injected nanoparticles forming a VEGF gradient in its porosity. After 16 weeks, histomorphometric measurements were performed to quantify bone growth and bone-to-implant contact, while the mechanical properties of regenerated bone via an atomic force microscopy (AFM) analysis were investigated. The results showed increased bone regeneration at the magnetized interface; this regeneration was higher in the VEGF-MNP-treated group, while the nanomechanical behavior of the tissue was similar to the pattern of the magnetic field distribution. This new approach provides insights into the ability of magnetic technologies to stimulate bone formation, improving bone/scaffold interaction.

Vitamin D and Platelets: A Menacing Duo in COVID-19 and Potential Relation to Bone Remodeling.

Global data correlate severe vitamin D deficiency with COVID-19-associated coagulopathy, further suggesting the presence of a hypercoagulable state in severe COVID-19 patients, which could promote thrombosis in the lungs and in other organs. The feedback loop between COVID-19-associated coagulopathy and vitamin D also involves platelets (PLTs), since vitamin D deficiency stimulates PLT activation and aggregation and increases fibrinolysis and thrombosis. Vitamin D and PLTs share and play specific roles not only in coagulation and thrombosis but also during inflammation, endothelial dysfunction, and immune response. Additionally, another 'fil rouge' between vitamin D and PLTs is represented by their role in mineral metabolism and bone health, since vitamin D deficiency, low PLT count, and altered PLT-related parameters are linked to abnormal bone remodeling in certain pathological conditions, such as osteoporosis (OP). Hence, it is possible to speculate that severe COVID-19 patients are characterized by the presence of several predisposing factors to bone fragility and OP that may be monitored to avoid potential complications. Here, we hypothesize different pervasive actions of vitamin D and PLT association in COVID-19, also allowing for potential preliminary information on bone health status during COVID-19 infection.

Vascular Supply and Bone Marrow Concentrate for the Improvement of Allograft in Bone Defects: A Comparative In Vivo Study.

BACKGROUND: Surgical repair of critical-sized bone defects still remains a big challenge in orthopedic surgery. Biological enhancement, such as growth factors or cells, can stimulate a better outcome in bone regeneration driven by well-established treatments such as allogenic bone graft. However, despite the surgical options available, correct healing can be slowed down or compromised by insufficient vascular supply to the injured site. MATERIALS AND METHODS: In this pilot study, critical size bone defects in rabbit radius were treated with allograft bone, in combination with vascular bundle and autologous bone marrow concentrate seeded onto a commercial collagen scaffold. Microtomographical, histological and immunohistochemical assessments were performed to evaluate allograft integration and bone regeneration. RESULTS: Results showed that the surgical deviation of vascular bundle in the bone graft, regardless from the addition of bone marrow concentrate, promote the onset of healing process at short experimental times (8 wk) in comparison with the other groups, enhancing graft integration. CONCLUSION: The surgical procedure tested stimulates bone healing at early times, preserving native bone architecture, and can be easily combined with biological adjuvant.

Platelet functions and activities as potential hematologic parameters related to Coronavirus Disease 2019 (Covid-19).

Coronavirus disease 2019 (COVID-19) is a new infectious disease that currently lacks standardized and established laboratory markers to evaluate its severity. In COVID-19 patients, the number of platelets (PLTs) and dynamic changes of PLT-related parameters are currently a concern. The present paper discusses the potential link between PLT parameters and COVID-19. Several studies have identified a link between severe COVID-19 patients and specific coagulation index, in particular, high D-dimer level, prolonged prothrombin time, and low PLT count. These alterations reflect the hypercoagulable state present in severe COVID-19 patients, which could promote microthrombosis in the lungs, as well as in other organs. Further information and more advanced hematological parameters related to PLTs are needed to better estimate this link, also considering COVID-19 patients at different disease stages and stratified in different cohorts based on preexisting co-morbidity, age, and gender. Increasing the understanding of PLT functions in COVID-19 will undoubtedly improve our knowledge on disease pathogenesis, clinical management, and therapeutic options, but could also lead to the development of more precise therapeutic strategies for COVID-19 patients.

Platelet Features and Derivatives in Osteoporosis: A Rational and Systematic Review on the Best Evidence.

Background: With the increase in aging population, the rising prevalence of osteoporosis (OP) has become an important medical issue. Accumulating evidence showed a close relationship between OP and hematopoiesis and emerging proofs revealed that platelets (PLTs), unique blood elements, rich in growth factors (GFs), play a critical role in bone remodeling. The aim of this review was to evaluate how PLT features, size, volume, bioactive GFs released, existing GFs in PLTs and PLT derivatives change and behave during OP. Methods: A systematic search was carried out in PubMed, Scopus, Web of Science Core Collection and Cochrane Central Register of Controlled Trials databases to identify preclinical and clinical studies in the last 10 years on PLT function/features and growth factor in PLTs and on PLT derivatives during OP. The methodological quality of included studies was assessed by QUIPS tool for assessing risk of bias in the clinical studies and by the SYRCLE tool for assessing risk of bias in animal studies. Results: In the initial search, 2761 studies were obtained, only 47 articles were submitted to complete reading, and 23 articles were selected for the analysis, 13 on PLT function/features and growth factor in PLTs and 10 on PLT derivatives. Risk of bias of almost all animal studies was high, while the in the clinical studies risk of bias was prevalently moderate/low for the most of the studies. The majority of the evaluated studies highlighted a positive correlation between PLT size/volume and bone mineralization and an improvement in bone regeneration ability by using PLTs bioactive GFs and PLT derivatives. Conclusions: The application of PLT features as OP markers and of PLT-derived compounds as therapeutic approach to promote bone healing during OP need to be further confirmed to provide clear evidence for the real efficacy of these interventions and to contribute to the clinical translation.

Osteochondral tissue cultures: Between limits and sparks, the next step for advanced in vitro models.

The increasing demand for reliable preclinical models and to reduce, refine and, if possible, replace animal studies have brought forth the development of complex tissue cultures in different research areas, including the musculoskeletal field. In this paper, we review the literature within last 10 years on the state of progress for in vitro models of osteochondral tissue cultures, taking into account the clinical relevance of the management and treatment of osteochondral lesions. According to the selected research criteria, 35 works, 27 of which with animal tissues and 8 with human tissues, resulted to be relevant for the purposes of this review. Data analyzed revealed a great heterogeneity among the proposed tissue culture models. The anatomical harvesting sites resulted to be mainly the knee stifle joint, both for animal (prevalently bovines) and human tissues derived from joint replacement surgery, and significant heterogeneity among culture conditions and media were found. To date, very few papers have focused on the set up of a reproducible in vitro model, applicable to a variety of studies, thus suggesting a relevant gap to fill in the development of advanced three-dimensional osteochondral culture models.

Bone marrow concentrate and expanded mesenchymal stromal cell surnatants as cell-free approaches for the treatment of osteochondral defects in a preclinical animal model.

PURPOSE: To evaluate the regenerative potential of surnatants (SNs) from bone marrow concentrate (SN-BMC) and expanded mesenchymal stromal cells (SN-MSCs) loaded onto a collagen scaffold (SC) in comparison with cell-based treatments (BMC and MSCs) in an osteochondral (OC) defect model in rabbits. METHODS: OC defects (3 × 5 mm) were created in the rabbit femoral condyles and treated with SC alone or combined with SN-BMC, SN-MSCs, BMC, and MSCs. In control groups, the defects were left untreated. At three and six months, the quality of regenerated tissue was evaluated with macroscopic, histologic, microtomographic, and immunohistochemical assessments. The production of several immunoenzymatic markers was measured in the synovial fluid. RESULTS: All proposed treatments improved OC regeneration in comparison with untreated and SC-treated defects. Both BMC and MSCs showed a similar healing potential than their respective SNs, with the best performance exerted by BMC as demonstrated with macroscopic and histological scores and type I and II collagen results. CONCLUSIONS: SNs loaded onto SC exerted a positive effect on OC defect regeneration, underlying the biological significance of the trophic factors, thus potentially opening new opportunities for the use of cell-free-based therapies. BMC was confirmed to be the most beneficial treatment.

Peripheral Blood Mononuclear Cells Spontaneous Osteoclastogenesis: Mechanisms Driving the Process and Clinical Relevance in Skeletal Disease.

In vitro peripheral blood mononuclear cells differentiate into osteoclasts under the influence of osteoclast-stimulating factors. However, accumulating evidence suggests spontaneous osteoclasts formation and activity in patients affected by local or systemic bone remodeling diseases in comparison with healthy controls. Therefore, within this review, we summarize the studies where spontaneous osteoclastogenesis of peripheral blood mononuclear cells was observed in pathological conditions of the skeletal system. We indicate a linkage between immunoregulation by T cells and spontaneous osteoclasts formation with increased levels of tumor necrosis factors-α, receptor activator of nuclear factor kappa-B ligand and inteleukin-7 production. In the light of these results, it would be of crucial importance to deepen the correlation between systemic bone remodeling diseases and spontaneous osteoclastogenesis as well as to investigate in detail the mechanisms underlying this phenomenon and the clinical relevance in bone remodeling disease diagnosis and monitoring.

Vitamin D Level Between Calcium-Phosphorus Homeostasis and Immune System: New Perspective in Osteoporosis.

Vitamin D is a key molecule in calcium and phosphate homeostasis; however, increasing evidence has recently shown that it also plays a crucial role in the immune system, both innate and adaptive. A deregulation of vitamin D levels, due also to mutations and polymorphisms in the genes of the vitamin D pathway, determines severe alterations in the homeostasis of the organism, resulting in a higher risk of onset of some diseases, including osteoporosis. This review gives an overview of the influence of vitamin D levels on the pathogenesis of osteoporosis, between bone homeostasis and immune system.

Calibration of Aseptic Loosening Simulation for Coatings Osteoinductive Effect.

The risk of aseptic loosening in cementless hip stems can be reduced by improving osseointegration with osteoinductive coatings favoring long-term implant stability. Osseointegration is usually evaluated in vivo studies, which, however, do not reproduce the mechanically driven adaptation process. This study aims to develop an in silico model to predict implant osseointegration and the effect of induced micromotion on long-term stability, including a calibration of the material osteoinductivity with conventional in vivo studies. A Finite Element model of the tibia implanted with pins was generated, exploiting bone-to-implant contact measures of cylindrical titanium alloys implanted in rabbits' tibiae. The evolution of the contact status between bone and implant was modeled using a finite state machine, which updated the contact state at each iteration based on relative micromotion, shear and tensile stresses, and bone-to-implant distance. The model was calibrated with in vivo data by identifying the maximum bridgeable gap. Afterward, a push-out test was simulated to predict the axial load that caused the macroscopic mobilization of the pin. The bone-implant bridgeable gap ranged between 50 µm and 80 µm. Predicted push-out strength ranged from 19 N to 21 N (5.4 MPa-3.4 MPa) depending on final bone-to-implant contact. Push-out strength agrees with experimental measurements from a previous animal study (4 ± 1 MPa), carried out using the same implant material, coated, or uncoated. This method can partially replace in vivo studies and predict the long-term stability of cementless hip stems.

Regeneration of Osteochondral Lesion of the Talus with Retrograde Drilling Technique: An In Vitro Pilot Study.

Background: Retrograde Drilling (RD) is a surgical technique employed for osteochondral lesions of the talus (OCLTs) to reach the subchondral bone lesion from behind, thus preserving cartilage integrity. The aim of the present pilot study was to set up an in vitro model of OCLTs to evaluate the regenerative potential of biological approaches that could be associated with the RD technique. Methods: For this purpose, an OCLT was created in human osteochondral specimens, to try to mimic the RD technique, and to compare the regenerative potential of two biological treatments. For this purpose, three groups of treatments were performed in vitro: (1) no treatment (empty defect); (2) autologous bone graft (ABG); (3) hyaluronic membrane enriched with autologous bone marrow cells. Tissue viability; production of Collagen I and II, Vascular Endothelial Growth Factor, and Aggrecan; and histological and microCT evaluations were performed after 30 days of culture in normal culture conditions. Results: It was observed that Group 3 showed the highest viability, and Group 2 showed the highest protein production. From a histological and microtomographic point of view, it was possible to appreciate the structure of the morcellized bone with which the defect of Group 2 was filled, while it was not yet possible to observe the deposition of mineralized tissue in Group 3. Conclusions: To conclude, this pilot study shows the feasibility of an alternative in vitro model to evaluate and compare the regenerative potential of two biological scaffolds, trying to mimic the RD technique as much as possible. The tissues remained vital for up to 4 weeks and both ABG and hyaluronic acid-based scaffolds stimulated the release of proteins linked to regenerative processes in comparison to the empty defect group.

Combining Multiple Spectroscopic Techniques to Reveal the Effects of Staphylococcus aureus Infection on Human Bone Tissues.

Osteomyelitis (OM) and periprosthetic joint infections (PJIs) are major public health concerns in Western countries due to increased life expectancy. Infections usually occur due to bacterial spread through fractures, implants, or blood-borne transmission. The pathogens trigger an inflammatory response that hinders bone tissue regeneration. Treatment requires surgical intervention, which involves the precise removal of infected tissue, wound cleansing, and local and systemic antibiotic administration. Staphylococcus aureus (SA) is one of the most common pathogens causing infection-induced OM and PJIs. It forms antimicrobial-resistant biofilms and is frequently found in healthcare settings. In this proof-of-concept, we present an approach based on multiple spectroscopic techniques aimed at investigating the effects of SA infection on bone tissue, as well as identifying specific markers useful to detect early bacterial colonization on the tissue surface. A cross-section of a human femoral diaphysis, with negative-culture results, was divided into three parts, and the cortical and trabecular regions were separated from each other. Two portions of each bone tissue type were infected with SA for one and seven days, respectively. Multiple techniques were used to investigate the impact of the infection on bone tissue, Brillouin-Raman microspectroscopy and attenuated total reflection Fourier transform infrared spectroscopy were employed to assess and develop a new noninvasive diagnostic method to detect SA by targeting the bone of the host. The results indicate that exposure to SA infection significantly alters the bone structure, especially in the case of the trabecular type, even after just one day. Moreover, Raman spectral markers of the tissue damage were identified, indicating that this technique can detect the effect of the pathogens' presence in bone biopsies and pave the way for potential application during surgery, due to its nondestructive and contactless nature.

Platelet and Lymphocyte-Related Parameters as Potential Markers of Osteoarthritis Severity: A Cross-Sectional Study.

BACKGROUND: Platelets and lymphocytes levels are important in assessing systemic disorders, reflecting inflammatory and immune responses. This study investigated the relationship between blood parameters (platelet count (PLT), mean platelet volume (MPV), lymphocyte count (LINF), and platelet-to-lymphocyte ratio (PLR)) and osteoarthritis (OA) severity, considering age, sex, and body mass index (BMI). METHODS: Patients aged ≥40 years were included in this cross-sectional study and divided into groups based on knee OA severity using the Kellgren-Lawrence (KL) grading system. A logistic regression model, adjusted for confounders, evaluated the ability of PLT, MPV, LINF, and PLR to categorize OA severity. Model performance in terms of accuracy, sensitivity, and specificity was assessed using ROC curves. RESULTS: The study involved 245 OA patients (51.4% female, 48.6% male) aged 40-90 years, 35.9% with early OA (KL < 3) and 64.1% moderate/severe OA (KL ≥ 3). Most patients (60.8%) were aged ≥60 years, and BMI was <25 kg/m2 in 33.9%. The model showed that a 25-unit increase in PLR elevates the odds of higher OA levels by 1.30 times (1-unit OR = 1.011, 95% CI [1.004, 1.017], p < 0.005), while being ≥40 years old elevates the odds by 4.42 times (OR 4.42, 95% CI [2.46, 7.95], p < 0.0005). The model's accuracy was 73.1%, with 84% sensitivity, 52% specificity, and an AUC of 0.74 (95% CI [0.675, 0.805]). CONCLUSIONS: Higher PLR increases the likelihood of moderate/severe OA, suggesting that monitoring these biomarkers could aid in early detection and management of OA severity. Further research is warranted to cross-validate these results in larger populations.

Regulation of osteogenesis and angiogenesis by cobalt, manganese and strontium doped apatitic materials for functional bone tissue regeneration.

Strontium, cobalt, and manganese ions are present in the composition of bone and useful for bone metabolism, even when combined with calcium phosphate in the composition of biomaterials. Herein we explored the possibility to include these ions in the composition of apatitic materials prepared through the cementitious reaction between ion-substituted calcium phosphate dibasic dihydrate, CaHPO4·2H2O (DCPD) and tetracalcium phosphate, Ca4(PO4)2O (TTCP). The results of the chemical, structural, morphological and mechanical characterization indicate that cobalt and manganese exhibit a greater delaying effect than strontium (about 15 at.%) on the cementitious reaction, even though they are present in smaller amounts within the materials (about 0.8 and 4.5 at.%, respectively). Furthermore, the presence of the foreign ions in the apatitic materials leads to a slight reduction of porosity and to enhancement of compressive strength. The results of biological tests show that the presence of strontium and manganese, as well as calcium, in the apatitic materials cultured in direct contact with human mesenchymal stem cells (hMSCs) stimulates their viability and activity. In contrast, the apatitic material containing cobalt exhibits a lower metabolic activity. All the materials have a positive effect on the expression of Vascular Endothelial Growth Factor (VEGF) and Von Willebrand Factor (vWF). Moreover, the apatitic material containing strontium induces the most significant reduction in the differentiation of preosteoclasts into osteoclasts, demonstrating not only osteogenic and angiogenic properties, but also ability to regulate bone resorption.

Ionized jet deposition of silver nanostructured coatings: Assessment of chemico-physical and biological behavior for application in orthopedics.

Infection is one of the main issues connected to implantation of biomedical devices and represents a very difficult issue to tackle, for clinicians and for patients. This study aimed at tackling infection through antibacterial nanostructured silver coatings manufactured by Ionized Jet Deposition (IJD) for application as new and advanced coating systems for medical devices. Films composition and morphology depending on deposition parameters were investigated and their performances evaluated by correlating these properties with the antibacterial and antibiofilm efficacy of the coatings, against Escherichia coli and Staphylococcus aureus strains and with their cytotoxicity towards human cell line fibroblasts. The biocompatibility of the coatings, the nanotoxicity, and the safety of the proposed approach were evaluated, for the first time, in vitro and in vivo by rat subcutaneous implant models. Different deposition times, corresponding to different thicknesses, were selected and compared. All silver coatings exhibited a highly homogeneous surface composed of nanosized spherical aggregates. All coatings having a thickness of 50 nm and above showed high antibacterial efficacy, while none of the tested options caused cytotoxicity when tested in vitro. Indeed, silver films impacted on bacterial strains viability and capability to adhere to the substrate, in a thickness-dependent manner. The nanostructure obtained by IJD permitted to mitigate the toxicity of silver, conferring strong antibacterial and anti-adhesive features, without affecting the coatings biocompatibility. At the explant, the coatings were still present although they showed signs of progressive dissolution, compatible with the release of silver, but no cracking, delamination or in vivo toxicity was observed.