Evaluating the Probiotic Potential of Lactic Acid Bacteria Implicated in Natural Fermentation of Table Olives, cv. Cobrançosa.

The probiotic features of Lactiplantibacillus (L.) pentosus and L. paraplantarum strains, endogenous in Cobrançosa table olives from northeast Portugal, were assessed in terms of functional properties and health benefits. Fourteen lactic acid bacteria strains were compared with Lacticaseibacillus casei from a commercial brand of probiotic yoghurt and L. pentosus B281 from Greek probiotic table olives, in attempts to select strains with higher probiotic performances than those references. For functional properties, the i53 and i106 strains, respectively, exhibited: 22.2 ± 2.2% and 23.0 ± 2.2% for Caco-2 cell adhesion capacity; 21.6 ± 7.8% and 21.5 ± 1.4% for hydrophobicity; 93.0 ± 3.0% and 88.5 ± 4.5% for autoaggregation ability by 24 h of incubation; and ability to co-aggregate with selected pathogens-from 29 to 40% to Gram+ (e.g., Staphylococcus aureus ATCC 25923 and Enterococcus faecalis ATCC 29212); and from 16 to 44% for Gram- (e.g., Escherichia coli ATCC 25922 and Salmonella enteritidis ATCC 25928). The strains proved to be resistant (i.e., halo zone ≤14 mm) to some antibiotics (e.g., vancomycin, ofloxacin, and streptomycin), but susceptible (i.e., halo zone ≥ 20 mm) to others (e.g., ampicillin and cephalothin). The strains exhibited health-beneficial enzymatic activity (such as acid phosphatase and naphthol-AS-BI-phosphohydrolase), but not health-harmful enzymatic activity (such as ß-glucuronidase and N-acetyl-ß-glucosaminidase). Additionally, the antioxidant activity and cholesterol assimilation features, respectively, of the strains were 19.6 ± 2.8% and 77.5 ± 0.5% for i53, and 19.6 ± 1.8% and 72.2 ± 0.9% for i106. This study indicated that the addition of L. pentosus strains i53 and/or i106 to Cobrançosa table olives is likely to enhance the added value of the final product, in view of the associated potential benefits upon human health.

Karlodinium veneficum: Growth optimization, metabolite characterization and biotechnological potential survey.

AIM OF THIS STUDY: The major aim of this work was to consistently optimize the production of biomass of the dinoflagellate Karlodinium veneficum and evaluate its extracts biotechnological potential application towards food, nutraceutical or/and pharmaceutical industries. METHODS AND RESULTS: A successful approach of biomass production of K. veneficum CCMP 2936 was optimized along with the chemical characterization of its metabolite profile. Several temperatures (12, 16, 20, 25, 30°C), L1 nutrient concentrations (0.5×, 2×, 2.5×, 3×) and NaCl concentrations (20, 25, 30, 40 g L-1 ) were tested. The growth rate was maximum at 16°C, 2× nutrient concentration and 40 g L-1 of NaCl; hence, these conditions were chosen for bulk production of biomass. Methanolic extracts were prepared, and pigments, lipids and phenolic compounds were assessed; complemented by antioxidant and anti-inflammatory capacities, and cytotoxicity. Fucoxanthin and derivatives accounted for 0.06% of dry weight, and up to 60% (w/w) of all quantified metabolites were lipids. Said extracts displayed high antioxidant capacity, as towards assessed via the NO•- and ABTS•+ assays (IC50  = 109.09 ± 6.73 and 266.46 ± 2.25 µgE  ml-1 , respectively), unlike observed via the O2 •- assay (IC25 reaching 56.06 ± 5.56 µgE  ml-1 ). No signs of cytotoxicity were observed. CONCLUSIONS: Karlodinium veneficum biomass production was consistently optimized in terms of temperature, L1 nutrient concentrations and NaCl concentration. In addition, this strain appears promising for eventual biotechnological exploitation. SIGNIFICANCE AND IMPACT OF THE STUDY: This work provides fundamental insights about the growth and potential of value-added compounds of dinoflagellate K. veneficum. Dinoflagellates, as K. veneficum are poorly studied regarding its biomass production and added-value compounds for potential biotechnological exploitation. These organisms are difficult to maintain and grow in the laboratory. Thus, any fundamental contribution is relevant to share with the scientific community.

Anti-Hepatocellular Carcinoma (HepG2) Activities of Monoterpene Hydroxy Lactones Isolated from the Marine Microalga Tisochrysis Lutea.

Tisochrysis lutea is a marine haptophyte rich in omega-3 polyunsaturated fatty acids (e.g., docosahexaenoic acid (DHA)) and carotenoids (e.g., fucoxanthin). Because of the nutraceutical applications of these compounds, this microalga is being used in aquaculture to feed oyster and shrimp larvae. In our earlier report, T. lutea organic crude extracts exhibited in vitro cytotoxic activity against human hepatocarcinoma (HepG2) cells. However, so far, the compound(s) accountable for the observed bioactivity have not been identified. Therefore, the aim of this study was to isolate and identify the chemical component(s) responsible for the bioactivity observed. Bioassay-guided fractionation through a combination of silica-gel column chromatography, followed by preparative thin layer chromatography (PTLC), led to the isolation of two diastereomers of a monoterpenoid lactone, namely, loliolide (1) and epi-loliolide (2), isolated for the first time in this species. The structural elucidation of both compounds was carried out by GC-MS and 1D (1H and 13C APT) and 2D (COSY, HMBC, HSQC-ed, and NOESY) NMR analysis. Both compounds significantly reduced the viability of HepG2 cells and were considerably less toxic towards a non-tumoral murine stromal (S17) cell line, although epi-loliolide was found to be more active than loliolide.

Gloeothece sp. as a Nutraceutical Source-An Improved Method of Extraction of Carotenoids and Fatty Acids.

The nutraceutical potential of microalgae boomed with the exploitation of new species and sustainable extraction systems of bioactive compounds. Thus, a laboratory-made continuous pressurized solvent extraction system (CPSE) was built to optimize the extraction of antioxidant compounds, such as carotenoids and PUFA, from a scarcely studied prokaryotic microalga, Gloeothece sp. Following "green chemical principles" and using a GRAS solvent (ethanol), biomass amount, solvent flow-rate/pressure, temperature and solvent volume-including solvent recirculation-were sequentially optimized, with the carotenoids and PUFA content and antioxidant capacity being the objective functions. Gloeothece sp. bioactive compounds were best extracted at 60 °C and 180 bar. Recirculation of solvent in several cycles (C) led to an 11-fold extraction increase of ß-carotene (3C) and 7.4-fold extraction of C18:2 n6 t (5C) when compared to operation in open systems. To fully validate results CPSE, this system was compared to a conventional extraction method, ultrasound assisted extraction (UAE). CPSE proved superior in extraction yield, increasing total carotenoids extraction up 3-fold and total PUFA extraction by ca. 1.5-fold, with particular extraction increase of 18:3 n3 by 9.6-fold. Thus, CPSE proved to be an efficient and greener extraction method to obtain bioactive extract from Gloeothece sp. for nutraceutical purposes-with low levels of resources spent, while lowering costs of production and environmental impacts.

Design of whey protein nanostructures for incorporation and release of nutraceutical compounds in food.

Whey proteins are widely used as nutritional and functional ingredients in formulated foods because they are relatively inexpensive, generally recognized as safe (GRAS) ingredient, and possess important biological, physical, and chemical functionalities. Denaturation and aggregation behavior of these proteins is of particular relevance toward manufacture of novel nanostructures with a number of potential uses. When these processes are properly engineered and controlled, whey proteins may be formed into nanohydrogels, nanofibrils, or nanotubes and be used as carrier of bioactive compounds. This review intends to discuss the latest understandings of nanoscale phenomena of whey protein denaturation and aggregation that may contribute for the design of protein nanostructures. Whey protein aggregation and gelation pathways under different processing and environmental conditions such as microwave heating, high voltage, and moderate electrical fields, high pressure, temperature, pH, and ionic strength were critically assessed. Moreover, several potential applications of nanohydrogels, nanofibrils, and nanotubes for controlled release of nutraceutical compounds (e.g. probiotics, vitamins, antioxidants, and peptides) were also included. Controlling the size of protein networks at nanoscale through application of different processing and environmental conditions can open perspectives for development of nanostructures with new or improved functionalities for incorporation and release of nutraceuticals in food matrices.

Biotechnological and Pharmacological Applications of Biotoxins and Other Bioactive Molecules from Dinoflagellates.

The long-lasting interest in bioactive molecules (namely toxins) produced by (microalga) dinoflagellates has risen in recent years. Exhibiting wide diversity and complexity, said compounds are well-recognized for their biological features, with great potential for use as pharmaceutical therapies and biological research probes. Unfortunately, provision of those compounds is still far from sufficient, especially in view of an increasing demand for preclinical testing. Despite the difficulties to establish dinoflagellate cultures and obtain reasonable productivities of such compounds, intensive research has permitted a number of advances in the field. This paper accordingly reviews the characteristics of some of the most important biotoxins (and other bioactive substances) produced by dinoflagellates. It also presents and discusses (to some length) the main advances pertaining to dinoflagellate production, from bench to large scale-with an emphasis on material published since the latest review available on the subject. Such advances encompass improvements in nutrient formulation and light supply as major operational conditions; they have permitted adaptation of classical designs, and aided the development of novel configurations for dinoflagellate growth-even though shearing-related issues remain a major challenge.

ß-Lactoglobulin microparticles obtained by high intensity ultrasound as a potential delivery system for bioactive peptide concentrate.

This work attempted to assess the effect of high intensity ultrasound (HIUS) upon development of bio-based delivery systems, from ß-lactoglobulin (ß-Lg) gelled microparticles, for encapsulation of a bioactive peptide concentrate (PepC). Solutions of 150 g L-1 of commercial ß-Lg and 30 g L-1 PepC, at various pH values (3.0, 4.0 and 5.5), were accordingly subjected to gelation for 30 min using a dry bath kept at 80 °C. The gelled systems were then exposed to HIUS at 0-4 °C, and the effect of processing time (2.5-20.0 min) was ascertained. Laser light scattering and confocal microscopy were used to characterize the particle size distribution, prior to and immediately after HIUS treatment. Gels obtained at pH 5.5 and 4.0 were harder than those obtained at pH 3.0. Ultrasound treatment of gels produced an important reduction in particle mean diameter as sonication time elapsed. Confocal microscopy indicated that application of HIUS led to almost round and monodispersed particles, at both pH 5.5 and 4.0. The peptide encapsulation efficiency was assessed by chromatography and accompanied by assay for bioactivity, after precipitation of the encapsulated material and analysis of the soluble peptides therein.

Effect of Solvent System on Extractability of Lipidic Components of Scenedesmus obliquus (M2-1) and Gloeothece sp. on Antioxidant Scavenging Capacity Thereof.

Microalgae are well known for their biotechnological potential, namely with regard to bioactive lipidic components-especially carotenoids and polyunsaturated fatty acids (PUFA), well-known for therapeutic applications based on their antioxidant capacity. The aim of this work was to evaluate the influence of four distinct food-grade solvents upon extractability of specific lipidic components, and on the antioxidant capacity exhibited against both synthetic (2,2-diphenyl-1-picrylhydrazyl (DPPH(•)) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid (ABTS(+•))) and biological reactive species (O2(•)⁻ and (•)NO⁻). A eukaryotic microalga (Scenedesmus obliquus (M2-1)) and a prokaryotic one (Gloeothece sp.) were used as case studies. Concerning total antioxidant capacity, the hexane:isopropanol (3:2) and acetone extracts of Sc. obliquus (M2-1) were the most effective against DPPH(•) and ABTS(+•), respectively. Gloeothece sp. ethanol extracts were the most interesting scavengers of O2(•)⁻, probably due the high content of linolenic acid. On the other hand, acetone and hexane:isopropanol (3:2) extracts were the most interesting ones in (•)NO⁻ assay. Acetone extract exhibited the best results for the ABTS assay, likely associated to its content of carotenoids, in both microalgae. Otherwise, ethanol stood out in PUFA extraction. Therefore, profiles of lipidic components extracted are critical for evaluating the antioxidant performance-which appears to hinge, in particular, on the balance between carotenoids and PUFAs.

Evaluation of the antioxidant activity of cell extracts from microalgae.

A growing market for novel antioxidants obtained from non-expensive sources justifies educated screening of microalgae for their potential antioxidant features. Characterization of the antioxidant profile of 18 species of cyanobacteria (prokaryotic microalgae) and 23 species of (eukaryotic) microalgae is accordingly reported in this paper. The total antioxidant capacity, accounted for by both water- and lipid-soluble antioxidants, was evaluated by the (radical cation) ABTS method. For complementary characterization of cell extracts, a deoxyribose assay was carried out, as well as a bacteriophage P22/Salmonella-mediated approach. The microalga Scenedesmus obliquus strain M2-1 exhibited the highest (p > 0.05) total antioxidant capacity (149 ± 47 AAU) of intracellular extracts. Its scavenger activity correlated well with its protective effects against DNA oxidative damage induced by copper(II)-ascorbic acid; and against decay in bacteriophage infection capacity induced by H2O2. Finally, performance of an Ames test revealed no mutagenic effects of the said extract.

Effects of Temperature, pH, and NaCl Concentration on Biomass and Bioactive Compound Production by Synechocystis salina.

Synechocystis salina is a cyanobacterium that has biotechnological potential thanks to its ability to synthesize several bioactive compounds of interest. Therefore, this study aimed to find optimal conditions, in terms of temperature (15-25 °C), pH (6.5-9.5), and NaCl concentration (10-40 g·L-1), using as objective functions the productivities of biomass, total carotenoids, total PBPs, phycocyanin (PC), allophycocyanin (APC), phycoerythrin (PE), and antioxidants (AOXs) capacity of Synechocystis salina (S. salina) strain LEGE 06155, based in factorial design resorting to Box-Behnken. The model predicted higher biomass productivities under a temperature of 25 °C, a pH of 7.5, and low NaCl concentrations (10 g·L-1). Maximum productivities in terms of bioactive compounds were attained at lower NaCl concentrations (10 g·L-1) (except for PE), with the best temperature and pH in terms of carotenoids and total and individual PBPs ranging from 23-25 °C to 7.5-9.5, respectively. PE was the only pigment for which the best productivity was reached at a lower temperature (15 °C) and pH (6.5) and a higher concentration of NaCl (≈25 g·L-1). AOX productivities, determined in both ethanolic and aqueous extracts, were positively influenced by lower temperatures (15-19 °C) and higher salinities (≈15-25 g·L-1). However, ethanolic AOXs were better recovered at a higher pH (pH ≈ 9.5), while aqueous AOXs were favored by a pH of 8. The model showed that biomass production can be enhanced by 175% (compared to non-optimized conditions), total carotenoids by 91%, PC by 13%, APC by 50%, PE by 130%, and total PBPs by 39%; for AOX productivities, only water extracts exhibited a (marginal) improvement of 1.4%. This study provided insightful information for the eventual upgrading of Synechocystis salina biomass in the biotechnological market.

Edible films and coatings from whey proteins: a review on formulation, and on mechanical and bioactive properties.

The latest decade has witnessed joint efforts by the packaging and the food industries to reduce the amount of residues and wastes associated with food consumption. The recent increase in environmental awareness has also contributed toward development of edible packaging materials. Viable edible films and coatings have been successfully produced from whey proteins; their ability to serve other functions, viz. carrier of antimicrobials, antioxidants, or other nutraceuticals, without significantly compromising the desirable primary barrier and mechanical properties as packaging films, will add value for eventual commercial applications. These points are tackled in this review, in a critical manner. The supply of whey protein-based films and coatings, formulated to specifically address end-user needs, is also considered.

Modelling growth of, and removal of Zn and Hg by a wild microalgal consortium.

Microorganisms isolated from sites contaminated with heavy metals usually possess a higher removal capacity than strains from regular cultures. Heavy metal-containing soil samples from an industrial dumpsite in Northern Portugal were accordingly collected; following enrichment under metal stress, a consortium of wild microalgae was obtained. Their ability to grow in the presence of, and their capacity to recover heavy metals was comprehensively studied; the datasets thus generated were fitted to by a combined model of biomass growth and metal uptake, derived from first principles. After exposure to 15 and 25 mg/L Zn(2+) for 6 days, the microalgal consortium reached similar, or higher cell density than the control; however, under 50 and 65 mg/L Zn(2+), 71% to 84% inhibition was observed. Growth in the presence of Hg(2+) was significantly inhibited, even at a concentration as low as 25 µg/L, and 90% inhibition was observed above 100 µg/L. The maximum amount of Zn(2+) removed was 21.3 mg/L, upon exposure to 25 mg/L for 6 day, whereas the maximum removal of Hg(2+) was 335 µg/L, upon 6 day in the presence of 350 µg/L. The aforementioned mechanistic model was built upon Monod assumptions (including heavy metal inhibition), coupled with Leudeking-Piret relationships between the rates of biomass growth and metal removal. The overall fits were good under all experimental conditions tested, thus conveying a useful tool for rational optimisation of microalga-mediated bioremediation.

Ultrahigh-sensitivity temperature fiber sensor based on multimode interference.

The proposed sensing device relies on the self-imaging effect that occurs in a pure silica multimode fiber (coreless MMF) section of a single-mode-multimode-single-mode (SMS)-based fiber structure. The influence of the coreless-MMF diameter on the external refractive index (RI) variation permitted the sensing head with the lowest MMF diameter (i.e., 55 µm) to exhibit the maximum sensitivity (2800 nm/RIU). This approach also implied an ultrahigh sensitivity of this fiber device to temperature variations in the liquid RI of 1.43: a maximum sensitivity of -1880 pm/°C was indeed attained. Therefore, the results produced were over 100-fold those of the typical value of approximately 13 pm/°C achieved in air using a similar device. Numerical analysis of an evanescent wave absorption sensor was performed, in order to extend the range of liquids with a detectable RI to above 1.43. The suggested model is an SMS fiber device where a polymer coating, with an RI as low as 1.3, is deposited over the coreless MMF; numerical results are presented pertaining to several polymer thicknesses in terms of external RI variation.

Microbiological profile of maize and rye flours, and sourdough used for the manufacture of traditional Portuguese bread.

A thorough microbiological study of maize and rye flours, and sourdoughs obtained therefrom for eventual manufacture of broa--a dark sour bread typical in Northern Portugal, following artisanal practices, was carried out. Towards this purpose, samples were supplied by 14 artisanal producers, selected from 4 sub-regions, during two periods of the year. Total viable counts, as well as viable mesophilic and thermophilic microorganisms, yeasts and molds, Gram⁻ rods, endospore-forming and nonsporing Gram⁺ rods, and catalase⁺ and catalase⁻ Gram⁺ cocci were assayed for. The comprehensive experimental dataset unfolded a unique and rather complex wild microflora in flours and sourdoughs throughout the whole region, which did not discriminate among sub-regions or seasons, or flour source for that matter. However, fermentation played a major role upon the numbers of the various microbial groups: the viable counts of yeasts, lactobacilli, streptococci, lactococci, enterococci and leuconostocs increased, whereas those of molds, Enterobacteriaceae, Pseudomonadaceae, staphylococci and micrococci decreased.

Light Modulation for Bioactive Pigment Production in Synechocystis salina.

Cyanobacteria are microorganisms that are well-adapted to sudden changes in their environment, namely to light conditions. This has allowed them to develop mechanisms for photoprotection, which encompass alteration in pigment composition. Therefore, light modulation appears to be a suitable strategy to enhance the synthesis of specific pigments (e.g., phycocyanin) with commercial interest, in addition to conveying a more fundamental perspective on the mechanisms of acclimatization of cyanobacterium species. In this study, Synechocystis salina was accordingly cultivated in two light phase stages: (i) white LED, and (ii) shift to distinct light treatments, including white, green, and red LEDs. The type of LED lighting was combined with two intensities (50 and 150 µmolphotons·m-2·s-1). The effects on biomass production, photosynthetic efficiency, chlorophyll a (chl a) content, total carotenoids (and profile thereof), and phycobiliproteins (including phycocyanin, allophycocyanin, and phycoerythrin) were assessed. White light (under high intensity) led to higher biomass production, growth, and productivity; this is consistent with higher photosynthetic efficiency. However, chl a underwent a deeper impact under green light (high intensity); total carotenoids were influenced by white light (high intensity); whilst red treatment had a higher effect upon total and individual phycobiliproteins. Enhanced PC productivities were found under modulation with red light (low intensities), and could be achieved 7 days earlier than in white LED (over 22 days); this finding is quite interesting from a sustainability and economic point of view. Light modulation accordingly appears to be a useful tool for supplementary studies pertaining to optimization of pigment production with biotechnological interest.

Diel biochemical and photosynthetic monitorization of Skeletonema costatum and Phaeodactylum tricornutum grown in outdoor pilot-scale flat panel photobioreactors.

Diatoms are currently considered valuable feedstocks for different biotechnological applications. To deepen the knowledge on the production of these microalgae, the diel pattern of batch growth, photosystem II performance, and accumulation of target metabolites of two commercially relevant diatoms, Phaeodactylum tricornutum and Skeletonema costatum, were followed outdoors in 100-L flat panel photobioreactors. S. costatum presented a higher light-to-biomass conversion resulting in higher growth than P. tricornutum. Both fluorescence data and principal component analysis pointed to temperature as a limiting factor for the growth of P. tricornutum. Higher protein and carbohydrate contents were found in P. tricornutum, whereas S. costatum fatty acids were characterized by a higher unsaturation degree. Higher productivities were found at 1 p.m. for protein, lipid, and ash in the case of S. costatum. Overall, S. costatum showed great potential for outdoor cultivation, revealing a broader temperature tolerance and increased biomass productivity than P. tricornutum.

Optical refractometer based on large-core air-clad photonic crystal fibers.

A large-core air-clad photonic crystal fiber-based sensing structure is described, which is sensitive to refractive index. The sensing head is based on multimodal interference, and relies on a single-mode/large-core air-clad photonic crystal fiber (PCF)/single-mode fiber configuration. Using two distinct large-core air-clad PCF geometries-one for refractive index measurement and the other for temperature compensation, it was possible to implement a sensing head sensitive to refractive index changes in water as induced by temperature variations. The results indicated the high sensitivity of this sensing head to refractive index variations of water, and a resolution of 3.4×10(-5) refractive index units could be achieved.

Light requirements in microalgal photobioreactors: an overview of biophotonic aspects.

In order to enhance microalgal growth in photobioreactors (PBRs), light requirement is one of the most important parameters to be addressed; light should indeed be provided at the appropriate intensity, duration, and wavelength. Excessive intensity may lead to photo-oxidation and -inhibition, whereas low light levels will become growth-limiting. The constraint of light saturation may be overcome via either of two approaches: increasing photosynthetic efficiency by genetic engineering, aimed at changing the chlorophyll antenna size; or increasing flux tolerance, via tailoring the photonic spectrum, coupled with its intensity and temporal characteristics. These approaches will allow an increased control over the illumination features, leading to maximization of microalgal biomass and metabolite productivity. This minireview briefly introduces the nature of light, and describes its harvesting and transformation by microalgae, as well as its metabolic effects under excessively low or high supply. Optimization of the photosynthetic efficiency is discussed under the two approaches referred to above; the selection of light sources, coupled with recent improvements in light handling by PBRs, are chronologically reviewed and critically compared.

Influence of bacterial dynamics upon the final characteristics of model Portuguese traditional cheeses.

The microbiological profile in raw milk cheeses is typically characterized by a multitude of microbial groups, with interactions among them throughout ripening that are not fully understood to date. Incidence of undesired microorganisms in raw cheesemaking milk, as is the case of either spoilage or even pathogenic ones, is a common trait in Portuguese traditional cheeses. Hence, they will likely contribute to the physicochemical changes occurring therein and, consequently, to the characteristics of the final product. In order to gain insight into their role, model cheese systems, manufactured as far as possible according to artisanal practices (except that the initial microbial load and biodiversity were controlled), were experimentally tested. Single contaminants, or a consortium thereof, were inoculated at two levels in sterilized raw ewe's milk, and duly combined with inocula containing one or two lactic acid bacteria normally found in those traditional cheeses. The physicochemical composition, organic acid profile, and evolution of both protein breakdown and rheology were monitored throughout a 60 d-ripening period. Modifications brought about within the cheese matrix as a result of microbial metabolism, especially those arising from the interaction between lactic acid bacteria and unwanted microorganisms, included the enhanced release of peptides and free amino acids, which in turn led to higher viscoelastic moduli. The final model cheeses could be well discriminated, based on the impact of the various inocula considered upon the levels of organic acids. Conversely, proteolysis and viscoelastic properties appeared to be essentially independent of the initial microflora.

In vitro screening for anti-microbial activity of chitosans and chitooligosaccharides, aiming at potential uses in functional textiles.

Antimicrobial finishing of textiles has been found to be an economical way to prevent (or treat) skin disorders. Hence, this research effort was aimed at elucidating the relationship between molecular weight (MW) of chitosan and its antimicrobial activity upon six dermal reference microorganisms, as well as the influence of the interactions with cotton fabrics on said activity. Using 3 chitosans with different MW, as well as two chitooligosaccharide (COS) mixtures, a relevant antimicrobial effect was observed by 24 h for the six microorganisms tested; it was apparent that the antimicrobial effect is strongly dependent on the type of target microorganism and on the MW of chitosan being higher for lower MW in the case of E. coli, K. pneumoniae and P. aeruginosa, and the reverse in the case of both Gram-positive bacteria. Furthermore, a strong anti-fungal effect was detectable upon C. albicans, resembling the action over Gram-positive bacteria. Interactions with cotton fabric resulted in a loss of COS activity when compared with cultured media, relative to the effect over Gram-negative bacteria. However, no significant differences for the efficacy of all the 5 compounds were observed by 4 h. The three chitosans possessed a higher antimicrobial activity when impregnated onto the fabric, and presented a similar effect on both Gram-positive bacteria and yeast, in either matrix. Pseudomonas aeruginosa showed to be the most resistant microorganism to all five compounds.