High-Energy Proton-Beam-Induced Polymerization/Oxygenation of Hydroxynaphthalenes on Meteorites and Nitrogen Transfer from Urea: Modeling Insoluble Organic Matter?

Formation and structural modification of oxygenated polycyclic aromatic hydrocarbons (oxyPAHs) by UV irradiation on minerals have recently been proposed as a possible channel of PAH transformation in astrochemical and prebiotic scenarios of possible relevance for the origin of life. Herein, it is demonstrated that high-energy proton-beam irradiation in the presence of various meteorites, including stony iron, achondrite, and chondrite types, promotes the conversion of two representative oxyPAH compounds, 1-naphthol and 1,8-dihydroxynaphthalene, to complex mixtures of oxygenated and oligomeric derivatives. The main identified products include polyhydroxy derivatives, isomeric dimers encompassing benzofuran and benzopyran scaffolds, and, notably, a range of quinones and perylene derivatives. Addition of urea, a prebiotically relevant chemical precursor, expanded the range of identified species to include, among others, quinone diimines. Proton-beam irradiation of oxyPAH modulated by nitrogen-containing compounds such as urea is proposed as a possible contributory mechanism for the formation and processing of insoluble organic matter in meteorites and in prebiotic processes.

Spontaneous wrinkle emergence in nascent eumelanin thin films.

Self-patterning processes originated by physical stimuli have been extensively documented in thin films, whereas spontaneous wrinkling phenomena due to chemical transformation processes are, to the best of our knowledge, unprecedented. Herein we report a case of spontaneous polymerization-driven surface nano-patterning (∼500 nm) that develops in smooth thin solid films of 5,6-dihydroxyindole (DHI), a major precursor of eumelanin polymers, over a time scale of 30 to 60 days in air at room temperature. The phenomenon can be observed only above a critical film thickness of ∼250 nm and it is affected by exposure to ammonia vapors causing acceleration of the oxidation process. The thickness-dependent onset of wrinkling can be attributed to non-homogeneous rates of oxidation through the film causing slow swelling/expansion of the inner layers followed by fast stiffening and cross-linking in the outer layer exposed to higher oxygen levels.

Nanoscale PDA disassembly in ionic liquids: structure-property relationships underpinning redox tuning.

Nanoscale disassembly of mussel-inspired polydopamine (PDA) in ionic liquids (ILs) was recently shown to induce an electron paramagnetic resonance (EPR)-detectable reorganization of free radical centers in the resulting nanoparticles (NPs) in an IL-controlled manner. Herein, we report electrical impedance spectroscopy (EIS) data showing that PDA NPs produced by suspending samples obtained in Tris and bicarbonate buffer (PDA-T and PDA-C) in different ILs display different redox activity as a result of structural control combined with IL-surface interactions. In particular, susceptibility to oxidation was found to correlate closely with the spin density in an ion pair-tunable fashion in ILs. Structural control over free radical properties and redox behavior of PDA NPs in ILs opens novel perspectives for the rational design of functional nanovectors of possible interest for drug delivery and theranostic applications.

Astrochemistry and Astrobiology: Materials Sciencein Wonderland?

Astrochemistry and astrobiology, the fascinating disciplines that strive to unravel the origin of life, have opened unprecedented and unpredicted vistas into exotic compounds as well as extreme or complex reaction conditions of potential relevance for a broad variety of applications. Representative, and so far little explored sources of inspiration include complex organic systems, such as polycyclic aromatic hydrocarbons (PAHs) and their derivatives; hydrogen cyanide (HCN) and formamide (HCONH2) oligomers and polymers, like aminomalononitrile (AMN)-derived species; and exotic processes, such as solid-state photoreactions on mineral surfaces, phosphorylation by minerals, cold ice irradiation and proton bombardment, and thermal transformations in fumaroles. In addition, meteorites and minerals like forsterite, which dominate dust chemistry in the interstellar medium, may open new avenues for the discovery of innovative catalytic processes and unconventional methodologies. The aim of this review was to offer concise and inspiring, rather than comprehensive, examples of astrochemistry-related materials and systems that may be of relevance in areas such as surface functionalization, nanostructures, and hybrid material design, and for innovative technological solutions. The potential of computational methods to predict new properties from spectroscopic data and to assess plausible reaction pathways on both kinetic and thermodynamic grounds has also been highlighted.

Modeling Fungal Melanin Buildup: Biomimetic Polymerization of 1,8-Dihydroxynaphthalene Mapped by Mass Spectrometry.

Due to the emerging biomedical relevance and technological potential of fungal melanins, and prompted by the virtual lack of information about their structural arrangement, an optimized synthetic protocol has been devised for a potential structural model of Ascomyces allomelanin through enzyme-catalyzed oxidative polymerization of 1,8-dihydroxynaphthalene (1,8-DHN). Electrospray ionization mass spectrometry (ESI-MS) measurements of freshly synthesized DHN-polymer recorded in the negative ion mode allowed detection of oligomers up to m/z 4000, separated by 158 Da, corresponding to the in-chain DHN-unit. The dominant peaks were assigned to singly-charged distribution, up to 23 repeating units, whereas a doubly charged polymer distribution was also detectable. Chemical derivatization, ultra-performance liquid chromatography (UPLC)-ESI MS, and MS/MS data confirmed that oxidative polymerization of 1,8-DHN proceeds through C-C coupling of the naphthalene rings. The new insights reported here into synthetic 1,8-DHN oligomers/polymers as a mimic of fungal melanins may guide novel interesting advances and applications in the field of biomimetic functional materials.

Hydration-controlled anisotropic and giant permittivity in TEG-functionalized eumelanin.

Although it has long been known that the peculiar electronic-ionic conductor behavior of eumelanin is critically dependent on hydration, the detailed mechanisms by which water-polymer interactions control and affect the conduction properties have remained largely obscure. In this paper, we report a remarkable anisotropy and giant polarization effect in a synthetic eumelanin (TEGMe) chemically functionalized with hydrophilic TEG residues. FT-IR analyses of water sorption isotherms and AC measurements were consistent with a microporous structure binding or hosting mainly isolated water molecules. In contrast, similar experiments on a commercial synthetic eumelanin (AMe) used as a reference were suggestive of a bulk macroporous scaffold binding or hosting liquid water. These data disclosed for the first time the differential impact on eumelanin conductivity of vapor, liquid and ice-like forms of water adsorbed onto or embedded into the polymer layer. It is thus demonstrated, for the first time, that hydration controls the conduction properties of eumelanin in a more complex manner than is commonly believed, involving, besides the reported semiquinone comproportionation equilibria, the mode of interaction of water molecules as governed by both the chemical and morphological features of the polymer.

Replacing Nitrogen by Sulfur: From Structurally Disordered Eumelanins to Regioregular Thiomelanin Polymers.

The oxidative polymerization of 5,6-dihydroxybenzothiophene (DHBT), the sulfur analog of the key eumelanin building block 5,6-dihydroxyindole (DHI), was investigated to probe the role of nitrogen in eumelanin build-up and properties. Unlike DHI, which gives a typical black insoluble eumelanin polymer on oxidation, DHBT is converted to a grayish amorphous solid (referred to as thiomelanin) with visible absorption and electron paramagnetic resonance properties different from those of DHI melanin. Mass spectrometry experiments revealed gradational mixtures of oligomers up to the decamer level. Quite unexpectedly, nuclear magnetic resonance (NMR) analysis of the early oligomer fractions indicated linear, 4-, and 7-linked structures in marked contrast with DHI, which gives highly complex mixtures of partially degraded oligomers. Density functional theory (DFT) calculations supported the tendency of DHBT to couple via the 4- and 7-positions. These results uncover the role of nitrogen as a major determinant of the structural diversity generated by the polymerization of DHI, and point to replacement by sulfur as a viable entry to regioregular eumelanin-type materials for potential applications for surface functionalization by dip coating.

Towards eumelanin@zeolite hybrids: pore-size-controlled 5,6-dihydroxyindole polymerization.

5,6-Dihydroxyindole (1) and its N-methyl derivative (2), key eumelanin building blocks, were inserted into zeolite L by sublimation at 175 °C for 5 days. At a 10 mg/300 mg indole/zeolite ratio, the resulting hybrids displayed a stable deep red coloration. CP/MAS (13)C NMR and UV/Vis spectroscopy of the red species suggested the generation and accommodation of quinonoid biindole derivative(s) within the void space of the acidic zeolite channels. Removal of the zeolite matrix by treatment with HF gave a stable species that could be separated by HPLC and characterized by mass spectrometry as an oxygenated biindole derivative (or a mixture of isomers), suggesting addition of water to the original dimer and subsequent re-oxidation. The characterization was corroborated by optimized molecular geometries and simulated UV spectra with density functional calculations. Loading 1 or 2 into the larger pores of SBA-15 type mesoporous silica resulted in black eumelanin-type polymers, confirming channel size dependence over the polymerization process.

Biotechnological Production and Characterization of Extracellular Melanin by Streptomyces nashvillensis.

Melanins are pigments employed in food, cosmetic, and textile industries, manufactured by extraction from cuttlefishes. Their biotechnological production by Streptomycetes, instead, has been poorly investigated so far. In this paper, for the first time, the strain Streptomyces nashvillensis DSM 40314 was tested as an extracellular melanin producer by investigating the influence of diverse temperatures (26, 28, and 30 °C) and pH values (6.0 and 7.0) on bacterial growth, melanin production, and on the activity of the secreted tyrosinase, the first enzyme of the pigment biosynthetic pathway. In physiological 96-h shake flask experiments, the optimal growth parameters resulted to be 28 °C and pH 7.0, at which a maximum biomass of 8.4 ± 0.5 gcdw/L, a melanin concentration of 0.74 ± 0.01 g/L (yield on biomass of 0.09 ± 0.01 g/gcdw and productivity of 0.008 ± 0.001 g/L/h), and a final tyrosinase activity of 10.1 ± 0.1 U/mL were reached. The produced pigment was purified from the broth supernatant with a two-step purification process (75.0 ± 2.0% of purity with 65.0 ± 5.0% of recovery) and tested for its chemical, antioxidant, and photoprotective properties. Finally, characterization by UV-visible and FT-IR spectroscopy, elemental analyses, and mono- and bi-dimensional NMR suggested the eumelanin-like nature of the pigment.

Risk assessment of feed components of botanical origin - Approaches taken in the European Union.

In view of a continuous trend in replacing synthetic feed additives and especially flavouring compounds by botanical preparations, different aspects of the safety evaluations of plants and plant-derived preparations and components in feed are discussed. This includes risk assessment approaches developed by the European Food Safety Authority (EFSA) for phytotoxins regarding unintentional exposure of target animals and of consumers to animal derived food via carry-over from feed. Relevant regulatory frameworks for feed additives and feed contaminants in the European Union are summarised and the essentials of existing guidelines used in the safety evaluation of botanicals and their preparations and components in feed are outlined. The examples presented illustrate how the safety of the botanicals, their preparations and components present in feed is assessed. An outlook on possible future developments in risk assessment by applying new in vitro and in silico methodologies is given.

Safety of feed additives consisting of microcrystalline cellulose and carboxymethyl cellulose for all animal species (International Cellulosics Association).

Following a request from the European Commission, the EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety of microcrystalline cellulose and carboxymethyl cellulose as technological feed additives for all animal species. In its previous opinions on the safety and efficacy of the products, the FEEDAP Panel could not conclude on proper identification and characterisation as required for a feed additive. The occurrence of potential toxic impurities could also not be assessed. Based on the new data provided, the feed additives microcrystalline cellulose and carboxymethyl cellulose were properly identified and characterised and were shown to meet the specifications set for their use as food additives. Therefore, the conclusions of the safety reached in the previous opinions for microcrystalline cellulose and carboxymethyl cellulose meeting the food additive specifications apply to the microcrystalline cellulose and carboxymethyl cellulose under assessment as feed additives. The additives are considered safe for all animal species, the consumer and the environment. In the absence of data, the FEEDAP Panel is not in the position to conclude on the safety for the user.

Safety and efficacy of a feed additive consisting of a tincture derived from the dried fruit of Schisandra chinensis (Turcz.) Baill. (omicha tincture) for poultry, horses, dogs and cats (FEFANA asbl).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of a tincture from the dried fruit of Schisandra chinensis (Turcz.) Baill. (omicha tincture), when used as a sensory additive in feed for horses, cats, dogs, and in feed and in water for drinking for poultry. The product is a water/ethanol (55:45 v/v) solution, with a dry matter content of not more than 4% (w/w) and a content of 0.01%-0.15% (w/w) for the sum of schisandrin and deoxyschisandrin. The Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) concluded that omicha tincture is safe at the following concentrations in complete feed: 16 mg/kg for turkeys for fattening, 12 mg/kg for chickens for fattening and other poultry for fattening or reared for laying/reproduction, 18 mg/kg for laying hens and other laying/reproductive birds, 56 mg/kg for dogs and 47 mg/kg for horses and cats. The additive is considered safe for consumers when used up to the highest safe level in feed for poultry species and horses. Omicha tincture should be considered as irritants to skin and eyes, and as dermal and respiratory sensitisers. The use of omicha tincture as a flavour in feed for poultry species and horses was not considered to be a risk to the environment. Since it was recognised that the fruit of S. chinensis can influence sensory properties of feedingstuffs, no further demonstration of efficacy was considered necessary for the tincture under assessment.

Safety and efficacy of a feed additive consisting of an essential oil derived from fresh leaves of Melaleuca cajuputi Maton & Sm. ex R. Powell and Melaleuca leucadendra (L.) L. (cajuput oil) for use in all animal species (FEFANA asbl).

Following a request from the European Commission, the EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety and efficacy of cajuput oil obtained from fresh leaves of Melaleuca cajuputi Maton & Sm. ex R. Powell and Melaleuca leucadendra (L.) L., when used as a sensory additive for all animal species. The FEEDAP Panel concluded that cajuput oil is safe up to the maximum proposed use levels in complete feed of 30 mg/kg for sows and dogs, 50 mg/kg for horses and ornamental fish, 40 mg/kg for salmon and 5 mg/kg for cats. For the other species, the calculated safe concentrations were 18 mg/kg for chickens for fattening, 26 mg/kg for laying hens, 23 mg/kg for turkeys for fattening, 37 mg/kg for pigs for fattening, 31 mg/kg for piglets, 78 mg/kg for veal calves (milk replacer), 69 mg/kg for cattle for fattening and sheep/goats, 45 mg/kg for dairy cows and 28 mg/kg for rabbits. These conclusions were extrapolated to other physiologically related species. For any other species, the additive is safe at 5 mg/kg complete feed. The use of cajuput oil in water for drinking was considered safe provided that the total daily intake does not exceed the daily amount considered safe when consumed via feed. No concerns for consumers and the environment were identified following the use of the additive up to the highest safe use level in feed. The essential oil under assessment should be considered as an irritant to skin and eyes, and as a dermal and respiratory sensitiser. Since cajuput oil was recognised to flavour food and their function in feed would be essentially the same as that in food, no further demonstration of efficacy was considered necessary.

Safety and efficacy of a feed additive consisting of a dry extract obtained from the leaves of Ginkgo biloba L. (ginkgo extract) for horses, dogs, cats, rabbits and guinea pigs (FEFANA asbl).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of a feed additive obtained from the dried leaves of Ginkgo biloba L. (ginkgo extract) when used as a sensory additive in feed for horses, dogs, cats, rabbits and guinea pigs. Ginkgo extract contains ≥ 24% total flavonoids, ≥ 6% total terpene lactones and ≤ 1 mg/kg ginkgolic acids. The EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) concluded that ginkgo extract is safe for the target species at the following concentrations in complete feed: 2.8 mg/kg for horses and cats, 1.1 mg/kg for rabbits and guinea pigs, and 3.3 mg/kg for dogs. No safety concern would arise for the consumers from the use of ginkgo extract up to the highest level in feed which is considered safe for food-producing species (horses and rabbits). The additive should be considered as irritant to skin and eyes, and as a dermal and respiratory sensitiser. The use of the additive at the proposed level in feed for the target species is not considered to be a risk to the environment. While the available data indicate that Ginkgo preparations have a distinctive flavour profile, there is no evidence that the ginkgo extract would impart flavour to a food or feed matrix. Therefore, the FEEDAP Panel cannot conclude on the efficacy of the additive.

Safety of a feed additive consisting of hydroxypropyl cellulose for all animal species (Association Management & Regulatory Services Ltd).

Following a request from the European Commission, the EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety of hydroxypropyl cellulose as a technological feed additive for all animal species. In its previous opinions on the safety and efficacy of the product, the FEEDAP Panel could not conclude on proper identification and characterisation as required for a feed additive. The occurrence of potential toxic impurities could also not be assessed. Based on the new data provided, the feed additive hydroxypropyl cellulose was properly identified and characterised and was shown to meet the specifications set for the food additive. Therefore, the conclusions of the safety assessment reached in the previous opinion for hydroxypropyl cellulose meeting the food additive specifications, apply to the hydroxypropyl cellulose under assessment as a feed additive. The feed additive is considered safe for all animal species, the consumer and the environment. In the absence of data, the FEEDAP Panel is not in the position to conclude on the safety for the user.

Safety of a feed additive consisting of ethyl cellulose for all animal species (Association Management & Regulatory Services Ltd).

Following a request from the European Commission, the EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety of ethyl cellulose as a technological feed additive for all animal species. In its previous opinions on the safety and efficacy of the product, the FEEDAP Panel could not conclude on proper identification and characterisation as required for a feed additive. The occurrence of potential toxic impurities could also not be assessed. Based on the new data provided, the feed additive ethyl cellulose was properly identified and characterised and was shown to meet the specifications set for the food additive. Therefore, the conclusions of the safety assessment reached in the previous opinions for ethyl cellulose meeting the food additive specifications, apply to the ethyl cellulose under assessment as a feed additive. The feed additive is considered safe for all animal species, the consumer and the environment. In the absence of data, the FEEDAP Panel is not in the position to conclude on the safety for the user.

Safety of feed additives consisting of hydroxypropyl methyl cellulose (E 464) and methyl cellulose (E 461) for all animal species (International Cellulosics Association).

Following a request from the European Commission, the EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety of hydroxypropyl methyl cellulose and methyl cellulose as technological feed additives for all animal species. In its previous opinions on the safety and efficacy of the products, the FEEDAP Panel could not conclude on proper identification and characterisation as required for a feed additive. The occurrence of potential toxic impurities could also not be assessed. Based on the new data provided, the feed additives hydroxypropyl methyl cellulose and methyl cellulose were properly identified and characterised and were shown to meet the specifications set for the food additives. Therefore, the conclusions of the safety assessments reached in the previous opinions for hydroxypropyl methyl cellulose and methyl cellulose meeting the food additive specifications, apply to the hydroxypropyl methyl cellulose and methyl cellulose under assessment as feed additives. The additives are considered safe for all animal species, the consumer and the environment. In the absence of data, the FEEDAP Panel is not in the position to conclude on the safety for the user.

Safety for the user of the feed additive consisting of ferric tyrosine chelate (TYFER™) for chickens, turkeys and minor poultry species for fattening or reared for laying/breeding (Akeso Biomedical, Inc).

Following a request from the European Commission, the Panel on Additives and Products or Substances used in Animal Feed (FEEDAP Panel) was asked to deliver a scientific opinion on the safety for the users of the feed additive consisting of ferric tyrosine chelate (TYFER™) when used as a zootechnical additive for chickens, turkeys and minor poultry species for fattening or reared for laying/breeding. The European Commission request follows a previous opinion of the FEEDAP Panel. In that opinion, the Panel identified several risks for the users of the additive; it was listed that it posed a risk to users by inhalation, should be considered as an irritant to skin, eyes and mucous membranes, and also that, due to its nickel content, should be considered as a dermal and respiratory sensitiser. In the current application, the applicant proposed a maximum content of nickel (50 mg/kg). No changes in the manufacturing process have been reported by the applicant. In the absence of new data, the FEEDAP Panel reiterates its previous conclusion that the additive should be as an irritant to skin, eyes and mucous membranes and as a dermal and respiratory sensitiser.

Safety and efficacy of a feed additive consisting of a tincture derived from the roots of Panax ginseng C.A.Mey. (ginseng tincture) for horses, dogs and cats (FEFANA asbl).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of a tincture from the roots of Panax ginseng C.A.Mey. (ginseng tincture), when used as a sensory additive in feed for horses, dogs and cats. The product is a water/ethanol (40:60 v/v) solution, with a dry matter content of no more than 6% and a content of 0.01%-0.5% (w/w) for the sum of the two triterpene saponins ginsenoside Rb1 and ginsenoside Rg1. The Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) concluded that the tincture is safe for horses, dogs and cats at the maximum proposed use level of 48.6, 228.7 and 162 mg/kg complete feed, respectively. The Panel also concluded that the additive is considered safe for consumers when used at the proposed conditions of use in feed for horses. Ginseng tincture should be considered as an irritant to skin and eyes, and as a dermal and respiratory sensitiser. The use of the ginseng tincture as a flavour in feed for horses was not expected to pose a risk for the environment. Since the roots of P. ginseng and its preparations were recognised to flavour food and their function in feed would be essentially the same, no demonstration of efficacy was considered necessary.

Safety and efficacy of a feed additive consisting of a tincture derived from the flowers of Syzygium aromaticum (L.) Merr. & L.M. Perry (clove tincture) for all animal species (FEFANA asbl).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of a tincture from the dried flower bud of Syzygium aromaticum (L.) Merr. & L.M. Perry (clove tincture) when used as a sensory additive in feed and water for drinking for all animal species. The product is a ■■■■■) solution, with a dry matter content of ~ 1.66%. The product contains on average 0.511% phenolic acids (of which 0.0344% were flavonoids), 0.039% eugenol, 0.00019% methyleugenol and 0.00008% estragole. The Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) concluded that the use of clove tincture is very unlikely to be of safety concern for the target species up to the maximum proposed use level of 50 mg clove tincture/kg complete feed for all animal species, except for horses, for which the proposed use level is 200 mg/kg complete feed. The FEEDAP Panel considers that the use in water for drinking alone or in combination with use in feed should not exceed the daily amount that is considered very unlikely to be of safety concern when consumed via feed alone. No safety concern would arise for the consumer and the environment from the use of clove tincture up to the maximum proposed use levels in feed. The additive under assessment should be considered as irritant to skin and eyes, and as a dermal and respiratory sensitiser. When handling the additive, exposure of unprotected users to methyleugenol and estragole may occur. Therefore, to reduce the risk, the exposure of the users should be minimised. Since the flower buds of S. aromaticum and their preparations were recognised to flavour food and their function in feed would be essentially the same, no demonstration of efficacy was considered necessary.