A Flexible Fluorescent Zr Carboxylate Metal-Organic Framework for the Detection of Electron-Rich Molecules in Solution.

A novel Zr(IV) dicarboxylate metal organic framework (MOF) built up from an s-tetrazine derived ligand was prepared. This solid, which exhibits a diamond type network, combines a good stability in water, a structural flexibility, and fluorescence properties thanks to the organic ligand. It is noteworthy that this fluorescence is quenched when exposed to electron-rich molecules in solution, such as amines or phenol, this phenomenon being associated with the adsorption of the quencher, as unambiguously proven by X-ray diffraction (XRD) analysis. Finally, the quenching efficiency is shown to be governed not only by electronic and steric factors but also by the relative polarity of the solvent, the MOF, and the quencher. This work thus suggests that it is possible to develop new MOF-based sensors presenting in a given medium (such as water) highly selective responses.

In Situ Solid-State (13)C NMR Observation of Pore Mouth Catalysis in Etherification of ß-Citronellene with Ethanol on Zeolite Beta.

The reaction mechanism of etherification of ß-citronellene with ethanol in liquid phase over acid zeolite beta is revealed by in situ solid-state (13)C NMR spectroscopy. Comparison of (13)C Hahn-echo and (1)H-(13)C cross-polarization NMR characteristics is used to discriminate between molecules freely moving in liquid phase outside the zeolite and molecules adsorbed inside zeolite pores and in pore mouths. In the absence of ethanol, ß-citronellene molecules enter zeolite pores and react to isomers. In the presence of ethanol, the concentration of ß-citronellene inside zeolite pores is very low because of preferential adsorption of ethanol. The etherification reaction proceeds by adsorption of ß-citronellene molecule from the external liquid phase in a pore opening where it reacts with ethanol from inside the pore. By competitive adsorption, ethanol prevents the undesired side reaction of ß-citronellene isomerization inside zeolite pores. ß-citronellene etherification on zeolite beta is suppressed by bulky base molecules (2,4,6-collidine and 2,6-ditertiarybutylpyridine) that do not enter the zeolite pores confirming the involvement of easily accessible acid sites in pore openings. The use of in situ solid-state NMR to probe the transition from intracrystalline catalysis to pore mouth catalysis depending on reaction conditions is demonstrated for the first time. The study further highlights the potential of this NMR approach for investigations of adsorption of multicomponent mixtures in general.

Solving the Hydrogen and Lithium Substructure of Poly(triazine imide)/LiCl Using NMR Crystallography.

Poly(triazine imide) with incorporated lithium chloride has recently attracted substantial attention due to its photocatalytic activity for water splitting. However, an apparent H/Li disorder prevents the delineation of structure-property relationships, for example, with respect to band-gap tuning. Herein, we show that through a combination of one- and two-dimensional, multinuclear solid-state NMR spectroscopy, chemical modelling, automated electron diffraction tomography, and an analysis based on X-ray pair distribution functions, it is finally possible to resolve the H/Li substructure. In each cavity, one hydrogen atom is bound to a bridging nitrogen atom, while a second one protonates a triazine ring. The two lithium ions within each cavity are positioned between two nitrogen atoms of neighbouring triazine rings. The thereby induced local dipole moments cause slight buckling of the framework and lateral displacements of the Cl- ions at a coherence length below 2 nm. Nevertheless, the average structure conforms to space group P21 21 21 . In this way, we demonstrate that, in particular, the above-mentioned techniques allow for smart interplay in delineating the real structure of PTI/LiCl.

A Breathing Zirconium Metal-Organic Framework with Reversible Loss of Crystallinity by Correlated Nanodomain Formation.

The isoreticular analogue of the metal-organic framework UiO-66(Zr), synthesized with the flexible trans-1,4-cyclohexanedicarboxylic acid as linker, shows a peculiar breathing behavior by reversibly losing long-range crystalline order upon evacuation. The underlying flexibility is attributed to a concerted conformational contraction of up to two thirds of the linkers, which breaks the local lattice symmetry. X-ray scattering data are described well by a nanodomain model in which differently oriented tetragonal-type distortions propagate over about 7-10 unit cells.

Investigating the Case of Titanium(IV) Carboxyphenolate Photoactive Coordination Polymers.

The reactivity of 2,5-dihydroxyterephthalic acid (H4DOBDC) with titanium(IV) precursors was thoroughly investigated for the synthesis of metal-organic frameworks under solvothermal conditions. Four crystalline phases were isolated whose structures were studied by a combination of single-crystal or powder X-ray diffraction and solid-state NMR. The strong coordination ability of the phenolate moieties was found to favor the formation of isolated TiO6 octahedra bearing solely organic ligands in the resulting structures, unless hydrothermal conditions and precondensed inorganic precursors are used. It is worth noting that these solids strongly absorb visible light, as a consequence of the ligand-to-metal charge transfer (LMCT) arising from Ti-phenolate bonds. Preliminary photocatalytic tests suggest that one compound, namely, MIL-167, presents a higher activity for hydrogen evolution than the titanium carboxylate MIL-125-NH2 but that such an effect cannot be directly correlated with its improved light absorption feature.

Mechanochromic luminescence of copper iodide clusters.

Luminescent mechanochromic materials are particularly appealing for the development of stimuli-responsive materials. Establishing the mechanism responsible for the mechanochromism is always an issue owing to the difficulty in characterizing the ground phase. Herein, the study of real crystalline polymorphs of a mechanochromic and thermochromic luminescent copper iodide cluster permits us to clearly establish the mechanism involved. The local disruption of the crystal packing induces changes in the cluster geometry and in particular the modification of the cuprophilic interactions, which consequently modify the emissive states. This study constitutes a step further toward the understanding of the mechanism involved in the mechanochromic luminescent properties of multimetallic coordination complexes.

Geometry flexibility of copper iodide clusters: variability in luminescence thermochromism.

An original copper(I) iodide cluster of novel geometry obtained by using a diphosphine ligand is reported and is formulated [Cu6I6(PPh2(CH2)3PPh2)3] (1). Interestingly, this sort of "eared cubane" cluster based on the [Cu6I6] inorganic core can be viewed as a combination of the two known [Cu4I4] units, namely, the cubane and the open-chair isomeric geometries. The synthesis, structural and photophysical characterisations, as well as theoretical study of this copper iodide along with the derived cubane (3) and open-chair (2) [Cu4I4(PPh3)4] forms, were investigated. A new polymorph of the cubane [Cu4I4(PPh3)4] cluster is indeed presented (3). The structural differences of the clusters were analyzed by solid-state nuclear magnetic resonance spectroscopy. Luminescence properties of the three clusters were studied in detail as a function of the temperature showing reversible luminescence thermochromism for 1 with an intense orange emission at room temperature. This behavior presents different feature compared to the cubane cluster and completely contrasts with the open isomer, which is almost nonemissive at room temperature. Indeed, the thermochromism of 1 differs by a concomitant increase of the two emission bands by lowering the temperature, in contrast to an equilibrium phenomenon for 3. The luminescence properties of 2 are very different by exhibiting only one single band when cooled. To rationalize the different optical properties observed, density functional theory calculations were performed for the three clusters giving straightforward explanation for the different luminescence thermochromism observed, which is attributed to different contributions of the ligands to the molecular orbitals. Comparison of 3 with its [Cu4I4(PPh3)4] cubane polymorphs highlights the sensibility of the emission properties to the cuprophilic interactions.

Can one and two-dimensional solid-state NMR fingerprint zeolite framework topology?

In this contribution, we have explored the potential and strength of one-dimensional (1D) (29)Si and two-dimensional (2D) (29)S-(29)Si and (29)Si-(17)O NMR as invariants of non-oriented graph for fingerprinting zeolite frameworks. 1D and 2D (29)Si NMR can indeed provide indications on the graph vertices, edges and allow the construction of the adjacency matrix, i.e. the set of connections between the graph vertices. From the structural data, hypothetical 1D (29)Si and 2D (29)Si-(29)Si NMR signatures for 193 of the zeolite frameworks reported in the Atlas of Zeolite Structures have been generated. Comparison between all signatures shows that thanks to the 1D (29)Si NMR data only, almost 20% of the known zeolite frameworks could be distinguished. Further NMR signatures were generated by taking into account 2D (29)Si-(29)Si and (29)Si-(17)O correlations. By sorting and comparison of all the NMR data, up to 80% of the listed zeolites could be unambiguously discriminated. This work indicates that (i) solid-state NMR data indeed represent a rather strong graph invariant for zeolite framework, (ii) despite their difficulties and costs (isotopic labeling is often required, the NMR measurements can be long), (29)Si and (17)O NMR measurements are worth being investigated in the frame of zeolites structure resolution. This approach could also be generalized to other zeolite-related materials containing NMR-measurable nuclides.

A Robust Infinite Zirconium Phenolate Building Unit to Enhance the Chemical Stability of Zr MOFs.

A novel Zr-chain based MOF, namely MIL-163, was designed and successfully synthesized using a bis-1,2,3-trioxobenzene ligand. Endowed with large square-shaped channels of 12 Šwidth, it shows remarkable water uptake (ca. 0.6 cm(3) g(-1) at saturating vapor pressure) and a remarkable stability in simulated physiological media, where archetypical Zr carboxylate MOFs readily degrade.

The structure of the aluminum fumarate metal-organic framework A520.

The synthesis of the commercially available aluminum fumarate sample A520 has been optimized and its structure analyzed through a combination of powder diffraction, solid-state NMR spectroscopy, molecular simulation, IR spectroscopy, and thermal analysis. A520 is an analogue of the MIL-53(Al)-BDC solid, but with a more rigid behavior. The differences between the commercial and the optimized samples in terms of defects have been investigated by in situ IR spectroscopy and correlated to their catalytic activity for ethanol dehydration.

Polymorphic copper iodide clusters: insights into the mechanochromic luminescence properties.

An in-depth study of mechanochromic and thermochromic luminescent copper iodide clusters exhibiting structural polymorphism is reported and gives new insights into the origin of the mechanochromic luminescence properties. The two different crystalline polymorphs exhibit distinct luminescence properties with one being green emissive and the other one being yellow emissive. Upon mechanical grinding, only one of the polymorphs exhibits great modification of its emission from green to yellow. Interestingly, the photophysical properties of the resulting partially amorphous crushed compound are closed to those of the other yellow polymorph. Comparative structural and optical analyses of the different phases including a solution of clusters permit us to establish a correlation between the Cu-Cu bond distances and the luminescence properties. In addition, the local structure of the [Cu4I4P4] cluster cores has been probed by (31)P and (65)Cu solid-state NMR analysis, which readily indicates that the grinding process modifies the phosphorus and copper atoms environments. The mechanochromic phenomenon is thus explained by the disruption of the crystal packing within intermolecular interactions inducing shortening of the Cu-Cu bond distances in the [Cu4I4] cluster core and eventually modification of the emissive state. These results definitely establish the role of cuprophilic interactions in the mechanochromism of copper iodide clusters. More generally, this study constitutes a step further into the understanding of the mechanism involved in the mechanochromic luminescent properties of metal-based compounds.

NMR crystallography: Applications to inorganic materials.

Current developments of NMR crystallography as well as some recent applications to diamagnetic inorganic solids are presented. First, we illustrate how solid-state NMR data can be used in combination with diffraction data for the determination of the periodic part of the crystal structures, from the space group selection, to the structure determination over the refinement and validation processes. As ss-NMR, contrary to diffraction (powder and single-crystal), is not restricted to periodic boundary conditions, ss-NMR data can be used to further complete the structural description of materials, including studies of local order/disorder, etc. This illustrated through examples, which are shown and discussed in the second part of this review.

Design of zeolite by inverse sigma transformation.

Although the search for new zeolites has traditionally been based on trial and error, more rational methods are now available. The theoretical concept of inverse σ transformation of a zeolite framework to generate a new structure by removal of a layer of framework atoms and contraction has for the first time been achieved experimentally. The reactivity of framework germanium atoms in strong mineral acid was exploited to selectively remove germanium-containing four-ring units from an UTL type germanosilicate zeolite. Annealing of the leached framework through calcination led to the new all-silica COK-14 zeolite with intersecting 12- and 10-membered ring channel systems. An intermediate stage of this inverse σ transformation with dislodged germanate four-rings still residing in the pores could be demonstrated. Inverse σ transformation involving elimination of germanium-containing structural units opens perspectives for the synthesis of many more zeolites.

Parallelizing acquisitions of solid-state NMR spectra with multi-channel probe and multi-receivers: applications to nanoporous solids.

A five-channel ((1)H, (19)F, (31)P, (27)Al, (13)C) 2.5 mm magic-angle-spinning (MAS) nuclear magnetic resonance (NMR) probe is used in combination with three separate receivers for the parallel acquisitions of one (1D) and two-dimensional (2D) NMR spectra in model fluorinated aluminophosphate and porous Al-based metal-organic framework (MOF). Possible combinations to record simultaneously spectra using this set-up are presented, including (i) parallel acquisitions of quantitative 1D NMR spectra of solids containing nuclei with contrasted T1 relaxation rates and (ii) parallel acquisitions of 2D heteronuclear NMR spectra. In solids containing numerous different NMR-accessible nuclei, the number of NMR experiments that have to be acquired to get accurate structural information is high. The strategy we present here, i.e. the multiplication of both the number of irradiation channels in the probe and the number of parallel receivers, offers one possibility to optimize this measurement time.

Triazine-based carbon nitrides for visible-light-driven hydrogen evolution.

A new dimension: The doping of amorphous poly(triazine imide) (PTI) through ionothermal copolymerization of dicyandiamide with 4-amino-2,6-dihydroxypyrimidine (4AP) results in triazine-based carbon nitrides with increased photoactivity for water splitting compared to crystalline poly(triazine imide) (PTI/Li(+)Cl(-), see picture) and melon-type carbon nitrides. This family of carbon nitride semiconductors has potential as low-cost, environmentally clean photocatalysts for solar fuel production.

High-resolution through-space correlations between spin-1/2 and half-integer quadrupolar nuclei using the MQ-D-R-INEPT NMR experiment.

The multiple-quantum dipolar refocused-INEPT (MQ-D-R-INEPT) NMR experiment is presented. This new pulse sequence allows the generation of two-dimensional through-space NMR correlation spectra between spin-½ and quadrupolar nuclei under high-resolution. Compared to the existing sequences, the MQ-D-R-INEPT sequence benefits from increased robustness, due to the reduced sensitivity to offsets and radio-frequency field inhomogeneity of the R-INEPT recoupling scheme as compared to the classical cross-polarization transfer involving a quadrupolar nucleus, and applicability to quadrupolar nuclei with any half-integer spin value. Here, the heteronuclear dipolar couplings have been reintroduced using the rotary resonance recoupling (R(3)) sequence, chosen because it is γ-encoded, and thus robust to spinning speed instabilities and to radio-frequency inhomogeneities in the case of nuclei subjected to large chemical shift anisotropy (e.g., (31)P). In the course of the article, a new definition of γ-encoding is introduced, more general and practical than the previous ones, as it does not depend on the implementation of the recoupling sequence, and is independent of the considered frame. The efficiency of the MQ-D-R-INEPT experiment is demonstrated for the observation of (31)P-(27)Al proximities. It is first tested on AlPO4-VPI-5, and then applied to a complex aluminophosphate AlPO4-(Al5P7)-DAE of incompletely established structure. For this latter sample, the high-resolution provided by the MQMAS filter allows the resolution of a large number of (31)P-(27)Al correlations, which represent an essential step towards the determination of its structural model.

Hartmann-Hahn 2D-map to optimize the RAMP-CPMAS NMR experiment for pharmaceutical materials.

Cross polarization-magic angle spinning (CPMAS) is the most used experiment for solid-state NMR measurements in the pharmaceutical industry, with the well-known variant RAMP-CPMAS its dominant implementation. The experimental work presented in this contribution focuses on the entangled effects of the main parameters of such an experiment. The shape of the RAMP-CP pulse has been considered as well as the contact time duration, and a particular attention also has been devoted to the radio-frequency (RF) field inhomogeneity. (13)C CPMAS NMR spectra have been recorded with a systematic variation of (13)C and (1)H constant radiofrequency field pair values and represented as a Hartmann-Hahn matching two-dimensional map. Such a map yields a rational overview of the intricate optimal conditions necessary to achieve an efficient CP magnetization transfer. The map also highlights the effects of sweeping the RF by the RAMP-CP pulse on the number of Hartmann-Hahn matches crossed and how RF field inhomogeneity helps in increasing the CP efficiency by using a larger fraction of the sample. In the light of the results, strategies for optimal RAMP-CPMAS measurements are suggested, which lead to a much higher efficiency than constant amplitude CP experiment.

Structure resolution of Ba5Al3F19 and investigation of fluorine ion dynamics by synchrotron powder diffraction, variable-temperature solid-state NMR, and quantum computations.

The room temperature structure of Ba(5)Al(3)F(19) has been solved using electron microscopy and synchrotron powder diffraction data. One-dimensional (1D) (27)Al and ultrafast magic-angle-spinning (MAS) (19)F NMR spectra have been recorded and are in agreement with the proposed structural model for Ba(5)Al(3)F(19). The (19)F isotropic chemical shift and (27)Al quadrupolar parameters have been calculated using the CASTEP code from the experimental and density functional theory geometry-optimized structures. After optimization, the calculated NMR parameters of both the (19)F and (27)Al nuclei show improved consistency with the experimental values, demonstrating that the geometry optimization step is necessary to obtain more accurate and reliable structural data. This also enables a complete and unambiguous assignment of the (19)F MAS NMR spectrum of Ba(5)Al(3)F(19). Variable-temperature 1D MAS (19)F NMR experiments have been carried out, showing the occurrence of fluorine ion mobility. Complementary insights were obtained from both two-dimensional (2D) exchange and 2D double-quantum dipolar recoupling NMR experiments, and a detailed analysis of the anionic motion in Ba(5)Al(3)F(19) is proposed, including the distinction between reorientational processes and chemical exchange involving bond breaking and re-formation.

NMR crystallography of AlPO4-CJ2: from the topological network to the local (OH)/F distribution.

We present in this contribution the description of the structure of AlPO(4)-CJ2 by NMR crystallography, from the main topological features to the very local order of the OH and F atoms. A whole range of 1D ((19)F, (31)P, (27)Al) and 2D heteronuclear ((27)Al-(31)P, (19)F-(27)Al, (19)F-(31)P) and homonuclear ((19)F-(19)F and (31)P-(31)P) NMR experiments with unprecedented resolution for AlPO(4)-CJ2 are used to describe and quantify the various environments of the aluminium, phosphorus and fluorine atoms leading to the determination of the integrant unit and its distribution in the 3D space, which defines the topological network. Additional local information about the OH/F distribution in this sample, which cannot be accessed by the usual diffraction techniques, is also provided by the high-resolution of the solid-state NMR spectra presented in this work. The example of AlPO(4)-CJ2 illustrates the importance of the high flexibility and versatility of the NMR experiment, which allows one to select the scale and the level of accuracy in the description of a structural model, together with the applicability of computational structure prediction methods once constituent building blocks are identified. This study, which lies in the frame of generalized crystallography, also highlights the value of providing an accurate and detailed structural description to better understand the formation of solids.