Capturing the cervical spine shape: Angular measurements versus geometric morphometric methods.

The cervical spine manifests a wide shape variation. However, the traditional methods to evaluate the cervical spine curve were never tested against its actual shape. The study's main aim was to determine whether the shape classification of the cervical spine, based on traditional angular measurements, coincides with each other and with the shape captured by the 2D landmark-based geometric morphometric method. The study's second aim was to reveal the associations between the cervical spine shape and the demographic parameters, the head's position, and the spine's sagittal balance. CT scans of the cervical spine of 163 individuals were evaluated to achieve these goals. The shape was assessed by measuring the C2-C7 Cobb angle (CA), the C2-C7 posterior tangent angle (PTA), the curvedness of the arch, and by a 2D landmark-based geometric morphometric method. The position of the head and the sagittal balance of the spine were evaluated by measuring the foramen magnum-C2 Cobb angle (FMCA) and the T1 slope angle (T1SA), respectively. Based on the size of the angle measured, each individual was classified into one of the three cervical 'shape groups' (lordotic, straight, and kyphotic). We found that cervical lordosis was the dominant shape regardless of the measuring methods utilized (46.6%-54.6%), followed by straight neck (28.2%-30.1%), and kyphosis (15.3%-25.2%); however, about a third of the 163 individuals were classified into a different shape group using the CA and PTA methods. The cervical spine angle was sex-independent and age-dependent. The T1SA was significantly correlated with CA and PTA (r = 0.640 and r = 0.585, respectively; p < 0.001). In conclusion, the cervical spine shape evaluation is method-dependent and varies with age.

A new method for sex estimation based on femoral cross-sectional geometry measurements and its validation using recent and ancient populations.

Estimating sex is a fundamental task in biological and forensic anthropology. This study aimed to develop new methods for sex estimation based on femoral cross-sectional geometry (CSG) variables and to test their applicability in recent and ancient assemblages. The sample was divided into a study group (living individuals, N = 124) for creating sex prediction equations and two test groups: living individuals (N = 31) and prehistoric individuals (N = 34). The prehistoric sample was divided into three subgroups according to subsistence strategy (hunter-gatherers, early farmers that also hunted, and farmers and herders). Femoral CSG variables (size, strength, and shape) were measured from CT images using dedicated software. Discriminant functions for sex estimation were calculated for various bone completeness scenarios and validated using the test groups. Size and strength parameters were sexually dimorphic, while shape was not. Discriminant functions for sex estimation produced success rates in the living sample between 83.9 and 93.5%; the distal shaft yielded the highest results. Success rates were lower among the prehistoric test sample, with better results (83.3%) for the mid-Holocene population (farmers and herders) than for earlier groups (e.g., hunter-gatherers; < 60%). These results were compared with those obtained using other methods for sex estimation based on various skeletal elements. This study provides new, reliable, and simple methods with high success rates for sex estimation based on femoral CSG variables obtained automatically from CT images. Discriminant functions were created for various conditions of femoral completeness. However, these functions should be used carefully in past populations from different settings.

The Hidden Secrets of the Dental Calculus: Calibration of a Mass Spectrometry Protocol for Dental Calculus Protein Analysis.

Dental calculus is a solid deposit that forms and accumulates on the tooth surface, entrapping oral microorganisms, biomolecules, and other micro-debris found in the oral cavity. A mass spectrometry analysis of its protein content opens a vista into the subject's diet, oral flora, and even some aspects of health, thus providing new insight and expanding our knowledge of archaic cultures. Multiple experimental protocols have been proposed for the optimal extraction of proteins from dental calculus. Herein, we compared various experimental conditions in order to calibrate and validate a protocol for protein extraction. Our results show that a high concentration of acetic acid followed by mechanical crushing and sonication provided the highest protein yield, while acetone precipitation enabled the identification of more distinct proteins. We validated this protocol using archeological samples, identifying human and microbial proteins in specimens from the eighth and seventeenth centuries (approximately 250-1300 years ago). These findings demonstrate that the developed protocol is useful for studying excavated archaeological samples and that it might be utilized to explore the biohistory, dietary habits, and microbiome of archaic populations.

The dental remains from the Early Upper Paleolithic of Manot Cave, Israel.

This study presents the dental remains discovered at Manot Cave (MC), Western Galilee, Israel. The cave contains evidence for human occupation during the Early Upper Paleolithic period (46-33 ka) mainly of Early Ahmarian (∼46-42 ka) and Levantine Aurignacian (∼38-34 ka) cultural levels. Six teeth (three deciduous and three permanent) were found at the site, of which four could be thoroughly analyzed. The morphology of the teeth was qualitatively described and analyzed using traditional and geometric morphometric methods. A large comparative sample was used in order to assess the morphological affiliation of the Manot specimens with other Homo groups. The results provided equivocal signals: the upper first premolar (MC-9 P3) is probably modern human; the upper deciduous second molar (MC-10 dm2) and the upper second permanent molar (MC-8 M2) might be modern humans; the lower second deciduous molar (MC-7 dm2) might be Neanderthal. Owing to the small sample size and the almost total lack of distinctive characteristics, our outcome could not supply conclusive evidence to address the question of whether Manot Aurignacian population came from Europe or descended from the local Ahmarian population.

Early Upper Paleolithic human foot bones from Manot Cave, Israel.

The transition from the Middle Paleolithic to the Upper Paleolithic in the Levant represents a major event in human prehistory with regards to the dispersal of modern human populations. Unfortunately, the scarcity of human remains from this period has hampered our ability to study the anatomy of Upper Paleolithic populations. This study describes and examines pedal bones recovered from the Early Upper Paleolithic period at Manot Cave, Israel, from 2014 to 2017. The Manot Cave foot bones include a partial, left foot skeleton comprising a talus, a calcaneus, a cuboid, a first metatarsal, a second metatarsal, a fifth metatarsal, and a hallucal sesamoid. All these remains were found in the same archaeological unit of the cave and belong to a young adult. Shape and size comparisons with Neanderthals, Anatomically Modern Human and modern human foot bones indicate a modern human morphology. In some characteristics, however, the Manot Cave foot bones display a Neanderthal-like pattern. Notably, the Manot Cave foot is remarkable in its overall gracility. A healed traumatic injury in the second metatarsal (Lisfranc's fracture) is most likely due to a remote impact to the dorsum of the foot. This injury, its subsequent debility, and the individual's apparent recovery suggest that the members of the Manot Cave community had a supportive environment, one with mutual responsibilities among the members.

The endocast of the late Middle Paleolithic Manot 1 specimen, Western Galilee, Israel.

Studying endocasts has long allowed anthropologists to examine changes in the external topography and the overall size of the brain throughout the evolutionary history of hominins. The nearly complete calvaria of Manot 1 presents an opportunity to gain insights into the external brain morphology, vascular system, and dimensions of the brain of this late Middle Paleolithic hominin. Detailed size and shape analyses of the Manot 1 endocast indicate a modern Homo sapiens anatomy, despite the presence of some primitive features of the calvaria. Traits considered to be derived endocranial features for H. sapiens are present in Manot 1, including an elongated parietal sagittal chord with an elevated superior part of the hemisphere, a widened posterior part of the frontal lobes, a considerable development of the parietal reliefs such as the supramarginal lobules, and a slight posterior projection of the occipital lobes. These findings, together with data presented in previous studies, rule out the possibility of a direct Neanderthal ancestry for the Manot 1 hominin and instead confirm its affiliation with H. sapiens. The Manot 1 calvaria is more similar to that of later Upper Paleolithic H. sapiens than it is to the earlier Levantine populations of Skhul and Qafzeh. The late Middle Paleolithic date of Manot 1 provides an opportunity to analyze the recent developments in human cerebral morphology and organization.

Unique foot posture in Neanderthals reflects their body mass and high mechanical stress.

Neanderthal foot bone proportions and morphology are mostly indistinguishable from those of Homo sapiens, with the exception of several distinct Neanderthal features in the talus. The biomechanical implications of these distinct talar features remain contentious, fueling debate around the adaptive meaning of this distinctiveness. With the aim of clarifying this controversy, we test phylogenetic and behavioral factors as possible contributors, comparing tali of 10 Neanderthals and 81 H. sapiens (Upper Paleolithic and Holocene hunter-gatherers, agriculturalists, and postindustrial group) along with the Clark Howell talus (Omo, Ethiopia). Variation in external talar structures was assessed through geometric morphometric methods, while bone volume fraction and degree of anisotropy were quantified in a subsample (n = 45). Finally, covariation between point clouds of site-specific trabecular variables and surface landmark coordinates was assessed. Our results show that although Neanderthal talar external and internal morphologies were distinct from those of H. sapiens groups, shape did not significantly covary with either bone volume fraction or degree of anisotropy, suggesting limited covariation between external and internal talar structures. Neanderthal external talar morphology reflects ancestral retentions, along with various adaptations to high levels of mobility correlated to their presumably unshod hunter-gatherer lifestyle. This pairs with their high site-specific trabecular bone volume fraction and anisotropy, suggesting intense and consistently oriented locomotor loading, respectively. Relative to H.sapiens, Neanderthals exhibit differences in the talocrural joint that are potentially attributable to cultural and locomotor behavior dissimilarity, a talonavicular joint that mixes ancestral and functional traits, and a derived subtalar joint that suggests a predisposition for a pronated foot during stance phase. Overall, Neanderthal talar variation is attributable to mobility strategy and phylogenesis, while H. sapiens talar variation results from the same factors plus footwear. Our results suggest that greater Neanderthal body mass and/or higher mechanical stress uniquely led to their habitually pronated foot posture.

Levantine cranium from Manot Cave (Israel) foreshadows the first European modern humans.

A key event in human evolution is the expansion of modern humans of African origin across Eurasia between 60 and 40 thousand years (kyr) before present (bp), replacing all other forms of hominins. Owing to the scarcity of human fossils from this period, these ancestors of all present-day non-African modern populations remain largely enigmatic. Here we describe a partial calvaria, recently discovered at Manot Cave (Western Galilee, Israel) and dated to 54.7 ± 5.5 kyr bp (arithmetic mean ± 2 standard deviations) by uranium-thorium dating, that sheds light on this crucial event. The overall shape and discrete morphological features of the Manot 1 calvaria demonstrate that this partial skull is unequivocally modern. It is similar in shape to recent African skulls as well as to European skulls from the Upper Palaeolithic period, but different from most other early anatomically modern humans in the Levant. This suggests that the Manot people could be closely related to the first modern humans who later successfully colonized Europe. Thus, the anatomical features used to support the 'assimilation model' in Europe might not have been inherited from European Neanderthals, but rather from earlier Levantine populations. Moreover, at present, Manot 1 is the only modern human specimen to provide evidence that during the Middle to Upper Palaeolithic interface, both modern humans and Neanderthals contemporaneously inhabited the southern Levant, close in time to the likely interbreeding event with Neanderthals.

Are chin and symphysis morphology facial type-dependent? A computed tomography-based study.

INTRODUCTION: The chin is a major determinant of the facial profile; hence, it plays a major role in orthodontics and orthognathic surgery. It is thus essential to follow and better understand its expression in different facial types. The major objectives of the current study were to characterize morphometrically the chin and symphysis and reveal their association with different facial types. METHODS: Computed tomography scans of the head and neck of 311 adults (163 males, 148 females; age range, 18-95 years) were classified into 3 facial types: short, average, and long. Height, width, projection, inclination, thickness, and area were measured on the chin and symphysis. RESULTS: The majority of the population (70%) manifested an average facial type; the other 30% were almost equally distributed between short and long facial types. The long facial type was more common among females and the short facial type among males. Chin projection, area, and size were significantly greater in short-faced patients. Chin width in males was similar for all facial types, whereas, in females, chin width was the widest in the short facial type and the narrowest in the long facial type. Symphysis height was significantly greater in long-faced patients in both sexes. The mandibular incisors' inclination relative to the mandibular plane was not significantly associated with the chin or symphysis morphology. CONCLUSIONS: Chin and symphysis morphology is facial type-dependent. Orthodontists and maxillofacial surgeons should be aware of the complex relationship between facial types and chin/symphysis size and shape when planning treatment.

New methods for sex estimation using sternum and rib morphology.

Sex estimation of skeletal remains is of great importance in the fields of physical and forensic anthropology. Since skeletons are often incomplete, it is essential to estimate sex from as many skeletal remains as possible. The aim of this study was to establish new methods for estimating sex using the morphology of the sternum and the fifth to ninth ribs. We considered two conditions of skeletal preservation: All skeletal elements measured are available, or only a single element is available. Traditional or virtual measurements were carried out on three samples: (1) A skeletal sample from the Hamann-Todd Human osteological collection, Cleveland Museum of Natural History, USA (N = 413), was used to create prediction equations for sex estimation. (2) A recent, CT-based sample from Israel (N = 33) was used to cross-validate the accuracy of the prediction equations. (3) A skeletal sample from the Anthropological Collection at Tel Aviv University (N = 15) was used to test the validity of the virtual measurements. Reliability and validity analyses were carried out via intraclass correlation coefficient analysis. Prediction equations for sex were created using logistic regression. The measurements were found to be highly reliable and valid. Success rates for sex estimation were high (> 80%) and correspond well between the skeletal and recent samples, especially for the left sixth, left eigth, and left ninth ribs. To conclude, measurements of the sternum and ribs are valuable for estimating sex and can be carried out using either traditional or virtual tools. Of all the skeletal elements examined in this study, the sternum, left sixth, left eighth, and left ninth ribs were found to be the most reliable skeletal elements for estimating the sex of an individual.

Age estimation of fragmented human dental remains by secondary dentin virtual analysis.

Unlike bones, teeth are remarkably resilient and can withstand severe trauma, making age assessment based on the dentition essential for forensic analysis. Modern techniques for age estimation focus on pulp-chamber volume measurements using radiographs and computerized tomography (CT); however, these are applicable only for complete teeth (i.e., with intact crown and root). In the current study, we developed a new approach using high-resolution micro-computerized tomography (µCT) to visualize the secondary dentin (SD), an inner layer surrounding the pulp which accumulates with age, thus facilitating age estimation of fragmented and broken teeth.The growth pattern of the SD with age was analyzed for 77 lower premolars from two anthropological collections. A comparison of SD virtual segmentation and histological measurement was highly correlative (ICC = 0.95). SD was measured per volume (mm3) of a 1 mm thick slice directly below the cemento-enamel junction. Regression analysis using SD measurements increased the success rates of age estimation (82%) compared with the "gold-standard" pulp/dentin method (54%) in the range of ± 10 years. The accuracy of age estimation based on SD analysis was improved to a range of 7-8 years.The SD method thus allows age estimation with greater prediction rates and better accuracy based on only a small fragment of a tooth in a non-invasive manner. This novel methodology is easy to use, accessible, and bears implications in various fields such as forensic sciences and anthropological research.

Sex estimation using computed tomography of the mandible.

Sex estimation of skeletal parts is of great value even in the DNA era. When computed tomography (CT) facilities were introduced to forensic institutes, new possibilities for sex estimation emerged. The aim of this study was to develop a CT-based method for sex estimation using the mandible. Twenty-five CT-based measurements of the mandible were developed and carried out on 3D reconstructions (volume rendering) and cross sections of the lower jaw of 438 adult individuals (214 males and 224 females). Intraobserver and interobserver variances of the measurements were examined using intraclass correlation coefficient (ICC) analysis. Five discriminant functions were developed using different states of completeness of the mandible. The success rates of these equations were cross validated twice. The measurements were found to be highly reliable (for intraobserver 0.838 < ICC < 0.995 and for interobserver 0.71 < ICC < 0.996). For a complete mandible, the correct classification rate was 90.8%. For incomplete mandibles, the correct classification rates varied from 72.9 to 85.6%. Cross-validation tests yielded similar success rates, for the complete mandible 89% and for the incomplete mandible 67.5 to 89%. We concluded that CT techniques are appropriate for estimating sex based on the mandible size and shape characteristics. Suggested discriminant functions for sex estimation are given with data on the correct classification rates.

The effect of impact tool geometry and soft material covering on long bone fracture patterns in children.

INTRODUCTION: The effect of impact tool geometry and soft material covering on bone fracture patterns plays a major role in fracture patterns. However, the literature is nearly void of such studies and only general correlations between the fracture pattern and the mechanism underlying the insult were reported. PURPOSE: The aim of this study is to reveal the association between the geometry of the impact tool and the presence of soft material covering on bone fracture patterns. The Dynatup Model POE 2000 (Instron Co.) low energy pendulum impact machine was utilized to apply impact loading on fresh pig femoral bones (n = 50). The bone clamp shaft was adjusted to position the bone for three-point bending with additional bone compression simulating a situation occurring in pedestrian road traffic accidents. Five different tests using varying impact tool sizes with and without soft interface covering were carried out. RESULTS: A significant positive correlation was found between the fracture features and the impact tool's geometry. Only bones that were damaged by a rounded impact body result in a "false" butterfly fragment; in all other cases where the impact body is flat and wide, double trapezoid fragments are observed in the area of impact. The impacted aspect is the most affected. All fracture line features were significantly greater in bones subjected to an impact by tools without soft covering. With an impact with soft covering, the impacted aspect exhibits numerous unique fracture lines and a fragmented pattern. Our study clearly shows that impact tool geometry and soft material covering markedly affect the fracture pattern.

Physical burden and lower limb bone structure at the origin of agriculture in the levant.

OBJECTIVES: To examine the femoral midshaft morphological characteristics in hunter-gathering Natufian and farming Pre-pottery Neolithic (PPN) populations in the southern Levant and relate these to changes in mobility, physical stress, and diet. MATERIALS AND METHODS: 32 Natufian, 41 PPNB, and 26 PPNC femora, dating from 14,900 to 8,250 cal BP, were studied. Femoral diaphyseal cross-sectional images were obtained from CT scans. Dedicated software was used to measure cross-sectional breadths, areas, cortical bone thickness, rigidity, and strength. RESULTS: Two general temporal trends in femoral bone architecture were observed: (1) a continuous decline in the relative amount of bone tissue (cortical area/total area) due to expansion of the medullary cavity and (2) an increase in circularity (decrease in anteroposterior/mediolateral ratios) together with an overall decline in bone rigidity and strength, mainly apparent in the later PPNC. The first trend suggests a gradual decline in nutritional quality and health continuing from the Natufian through the late Neolithic. The second trend is interpreted as a result of increased sedentism with the full establishment of agriculture. DISCUSSION: The transition to food production in the southern Levant was accompanied by reduced physical stress and mobility, with the most marked effects occurring toward the end of the PPN with increasing sedentism. Deterioration of nutrition and health also occurred, but more continuously from the beginning of the PPN. Thus, environmental changes associated with the agricultural transition in this region of the world were gradual and prolonged, with direct dietary effects more apparent earlier than reductions in mobility. Am J Phys Anthropol 161:26-36, 2016. © 2016 Wiley Periodicals, Inc.

Paraspinal muscles density: a marker for degenerative lumbar spinal stenosis?

BACKGROUND: The condition of paraspinal muscles is known to be associated with some variables such as age, gender, and low back pain. It is generally agreed that these muscles play an important role in the stability and functional movements of the lumbar vertebral column. Although spinal instability has been shown to play an essential role in degenerative lumbar spinal stenosis (DLSS), the role of paraspinal muscles remains elusive. The main purpose of this study was to shed light on the relationship between the condition of paraspinal muscles and symptomatic DLSS. METHODS: Two sample populations were studied. The first included 165 individuals with DLSS (age range: 40-88, sex ratio: 80 M/85 F) and the second 180 individuals without spinal stenosis related symptoms and low back pain (age range: 40-99, sex ratio: 90 M/90 F). Measurements were taken at the middle part of L3 vertebral body, using CT axial images (Philips Brilliance 64). Muscles density was measured in Hounsfield units (HU) using a 50 mm2 circle of the muscle mass at three different locations and the mean density was then calculated. The cross-sectional area (CSA) was also measured using the quantitative CT angiography method. Analysis of Covariance (adjusted for body mass index and age) was performed in order to determine the relationship between the condition of paraspinal muscles and symptomatic DLSS. RESULTS: Individuals in the stenosis group had higher muscle density as compared to the control group. The CSA values for the erector spinae (both sexes) and psoas (males) muscles were significantly greater in the stenosis group as compared to their counterparts in the control group. Additionally, density of multifidus (both sexes) and erector spinae (males) muscles was significantly associated with symptomatic DLSS. CONCLUSIONS: Our results show that individuals with symptomatic DLSS manifest greater paraspinal muscles density and CSA (erector spinae), compared to the control group. Density of multifidus increases the likelihood of symptomatic DLSS.

Rate and pattern of interproximal dental attrition.

Although occlusal and interproximal attrition occur because of diverse etiology and present dissimilar features, both progress with age. The objectives of this study were to reveal the rate and pattern of development of interproximal attrition facets (PAF) with age and to compare those with occlusal attrition (OA) changes. Five-hundred and ninety-four teeth were collected from 198 skulls (of adults, 20-71 yr of age). Three mandibular teeth [first premolar (P1), second premolar (P2), and first molar (M1)] were examined for PAF size and OA rate. Interproximal attrition and OA followed similar patterns of development until subjects reached 40-45 yr of age, after which they took different paths: PAF did not increase in size and were not as large as in younger groups, regardless of facet location, whereas OA continued to progress. The PAF changes with age differed between premolars and molars, unlike OA, which presented a similar rate for all teeth studied. Although OA scores presented significantly moderate correlations with age, PAF area size demonstrated low correlations with age. Low, but significant, correlations were found between the rate of OA and that of PAF. However, PAF and OA exhibited different patterns of development with age. Premolars and molars presented dissimilar development of PAF, which is probably caused by a unique attrition pattern in the molar teeth, different morphology, and force vectors.

Vertebral hemangiomas: their demographical characteristics, location along the spine and position within the vertebral body.

PURPOSE: Vertebral hemangiomas (VHs) are the most common form of benign tumors in the spine. The aim of this research was to study the prevalence of VHs in the human population, their distribution along the spine and their location in the vertebral body. METHODS: The presence of VHs was assessed in full spine CT scans of 196 adults. Demographic data were gathered from medical records. RESULTS: VHs were present in 26.0% of the individuals studied, a rate significantly higher (χ2=43.338, p<0.001) than the prevalence reported in the literature (10.7%). Multiple VHs (≥2) appeared in 7.2% of the population studied. VHs prevalence is sex-independent, appearing in 28.6% of females and 23.5% of males (χ2=0.663, p=0.416); and age-dependent: the mean age of affected individuals (65.8 years) was significantly higher (p<0.001) than unaffected individuals (56.2 years). VH size was also age-dependent (p=0.023). No vertebra was significantly more prone to be affected by a hemangioma. T11 and T12 show the highest prevalence of VHs (3.57% of vertebrae affected). VHs were found in similar percentages in the anterior and posterior parts of the vertebral body (52.8 vs. 47.2%, respectively); and at its center and periphery (50.1 and 49.9%, respectively). VHs usually appeared at mid-height of the vertebral body or slightly higher. CONCLUSIONS: The reported prevalence of VHs is dependent on the demographic structure of the population studied, the size of the VHs and the method used to identify them. Overall, the phenomenon is more frequent than usually reported. VHs may appear at all vertebral levels and in all areas of the vertebral body.

Proximal attrition facets: morphometric, demographic, and aging characteristics.

Although interproximal attrition is considered to be limited in modern populations, it has important clinical implications. However, in contrast to occlusal attrition, proximal attrition receives limited scientific attention. The main purpose of the current study was to fill this void. Seven-hundred and sixty-five teeth were collected from 255 skulls of subjects 18-75 yr of age. For each individual, three mandibular teeth (the first and second premolars and the first molar) were examined for proximal attrition facets (PAFs). The results provide detailed information on the size, shape, and location of the facets according to age cohort, gender, and ethnicity. The validity of the method used to measure the facets was also examined. The major findings were as follows: PAFs are usually located on the upper half of the crown proximal aspect; in each tooth, the mesial facet is more lingually positioned and the distal facet is more buccally positioned; the majority of the facets are subrectangular in shape; the size of the facets tends to increase in an anteroposterior direction (from premolars to molars); and facet size and location are age- and sex-dependent and ethnicity-independent. It is our recommendation that dentists bear in mind that interproximal attrition is a dynamic, long-term process and needs to be considered in many clinical scenarios.

Evolutionary roots of the risk of hip fracture in humans.

The transition to bipedal locomotion was a fundamental milestone in human evolution. Consequently, the human skeleton underwent substantial morphological adaptations. These adaptations are responsible for many of today's common physical impairments, including hip fractures. This study aims to reveal the morphological changes in the proximal femur, which increase the risk of intracapsular hip fractures in present-day populations. Our sample includes chimpanzees, early hominins, early Homo Neanderthals, as well as prehistoric and recent humans. Using Geometric Morphometric methods, we demonstrate differences in the proximal femur shape between hominids and populations that practiced different lifestyles. We show that the proximal femur morphology is a risk factor for intracapsular hip fracture independent of osteoporosis. Changes in the proximal femur, such as the shortening of the femoral neck and an increased anterolateral expansion of the greater trochanter, are associated with an increased risk for intracapsular hip fractures. We conclude that intracapsular hip fractures are a trade-off for efficient bipedal walking in humans, and their risk is exacerbated by reduced physical activity.

Intracranial volume, cranial thickness, and hyperostosis frontalis interna in the elderly.

OBJECTIVES: According to the "brain reserve hypothesis," a larger premorbid brain protects against the development of dementia. The aim of this study was to reveal a possible pathophysiology of brain degenerative diseases by studying intracranial bone lesions that act to reduce intracranial volume (ICV), such as hyperostosis frontalis interna (HFI). METHODS: Three hundred and eighty postmenopausal females (aged 60+) who had undergone a head computerized tomography scan (Brilliance 64, Philips Healthcare, Cleveland, OH) at the Carmel Medical Center, Haifa, Israel, before the study were included. The subjects were divided into four groups according to their degree of HFI. Six measurements of the skull and brain were taken. RESULTS: As HFI becomes more severe, the cranial bone thickness and cranial bone volume increase. This process is accompanied by a decrease in ICV. In none of the HFI groups studied there was a significant association between ICV and cranial bone thickness. The inter-relationships between the various thickness parameters are not disturbed by the degree of HFI. CONCLUSION: HFI is accompanied by an increase in thickness of all calvarial bones and reduced ICV. In addition, the thickening process initiated by HFI is synchronized among the calvarial bones. Presence of HFI suggests a decrease in brain volume and has a major clinical significance as it may indicate the beginning of degenerative processes of the brain. In addition, as females age, their skulls tend to develop more robust characteristics.