Unexpected Electronic Features of NiO Quantum Dots Produced by Femtosecond Pulsed Laser Ablation in Water.

This study examines the effect of quantum confinement and surface orientations on the electronic properties of NiO quantum dots. It compares NiO nanocrystals produced via atmospheric-pressure microplasma and femtosecond laser (fs-laser) ablation in water, finding that both methods yield quantum-confined nanocrystals with a defined face-centered cubic lattice. Notably, fs-laser synthesis generates crystalline nanocrystals from both crystalline and amorphous targets. While the electronic properties, i.e., energy of the highest occupied molecular orbital and lowest unoccupied molecular orbital (LUMO), of microplasma-synthesized NiO nanocrystals are consistent with the literature, the electronic characteristics of NiO nanocrystals produced by a fs-laser, particularly the high-lying LUMO level, are unusual for NiO quantum dots. Supported by density functional theory calculations, we show that the observed level positions are related to the different polar and nonpolar faces of the nanocrystal surface.

A Single-Step Process to Produce Carbon Nanotube-Zinc Compound Hybrid Materials.

An atmospheric-pressure plasma system is developed and is used to treat carbon nanotube assemblies, producing a hybrid carbon-zinc structure. This system is integrated into a floating-catalyst chemical vapor deposition furnace used for the synthesis of macroscopic assemblies of carbon nanotubes to allow for the in-line, continuous, and single-step production of nano-composite materials. Material is deposited from a sacrificial zinc wire in the form of nanoparticles and can coat the surface of the individual carbon nanotubes as they form. Additionally, it is found that the deposited materials penetrate further into the carbon nanotube matrix than a comparable post-synthesis deposition, improving the uniformity of the material through the thickness. Thus, a single-step metal-based coating and carbon nanotube synthesis process which can form the basis of production scale manufacturing of metal-carbon nanotube composite materials with an atmospheric-pressure plasma system are demonstrated.

Flexible Bifunctional Electrode for Alkaline Water Splitting with Long-Term Stability.

Progress in electrochemical water-splitting devices as future renewable and clean energy systems requires the development of electrodes composed of efficient and earth-abundant bifunctional electrocatalysts. This study reveals a novel flexible and bifunctional electrode (NiO@CNTR) by hybridizing macroscopically assembled carbon nanotube ribbons (CNTRs) and atmospheric plasma-synthesized NiO quantum dots (QDs) with varied loadings to demonstrate bifunctional electrocatalytic activity for stable and efficient overall water-splitting (OWS) applications. Comparative studies on the effect of different electrolytes, e.g., acid and alkaline, reveal a strong preference for alkaline electrolytes for the developed NiO@CNTR electrode, suggesting its bifunctionality for both HER and OER activities. Our proposed NiO@CNTR electrode demonstrates significantly enhanced overall catalytic performance in a two-electrode alkaline electrolyzer cell configuration by assembling the same electrode materials as both the anode and the cathode, with a remarkable long-standing stability retaining ∼100% of the initial current after a 100 h long OWS run, which is attributed to the "synergistic coupling" between NiO QD catalysts and the CNTR matrix. Interestingly, the developed electrode exhibits a cell potential (E10) of only 1.81 V with significantly low NiO QD loading (83 µg/cm2) compared to other catalyst loading values reported in the literature. This study demonstrates a potential class of carbon-based electrodes with single-metal-based bifunctional catalysts that opens up a cost-effective and large-scale pathway for further development of catalysts and their loading engineering suitable for alkaline-based OWS applications and green hydrogen generation.

Controllable Anchoring of Graphitic Carbon Nitride on MnO2 Nanoarchitectures for Oxygen Evolution Electrocatalysis.

The design and fabrication of eco-friendly and cost-effective (photo)electrocatalysts for the oxygen evolution reaction (OER) is a key research goal for a proper management of water splitting to address the global energy crisis. In this work, we focus on the preparation of supported MnO2/graphitic carbon nitride (g-CN) OER (photo)electrocatalysts by means of a novel preparation strategy. The proposed route consists of the plasma enhanced-chemical vapor deposition (PE-CVD) of MnO2 nanoarchitectures on porous Ni scaffolds, the anchoring of controllable g-CN amounts by an amenable electrophoretic deposition (EPD) process, and the ultimate thermal treatment in air. The inherent method versatility and flexibility afforded defective MnO2/g-CN nanoarchitectures, featuring a g-CN content and nano-organization tunable as a function of EPD duration and the used carbon nitride precursor. Such a modulation had a direct influence on OER functional performances, which, for the best composite system, corresponded to an overpotential of 430 mV at 10 mA/cm2, a Tafel slope of ≈70 mV/dec, and a turnover frequency of 6.52 × 10-3 s-1, accompanied by a very good time stability. The present outcomes, comparing favorably with previous results on analogous systems, were rationalized on the basis of the formation of type-II MnO2/g-CN heterojunctions, and yield valuable insights into this class of green (photo)electrocatalysts for end uses in solar-to-fuel conversion and water treatment.

Hybrid Plasma-Liquid Functionalisation for the Enhanced Stability of CNT Nanofluids for Application in Solar Energy Conversion.

Macroscopic ribbon-like assemblies of carbon nanotubes (CNTs) are functionalised using a simple direct-current-based plasma-liquid system, with oxygen and nitrogen functional groups being added. These modifications have been shown to reduce the contact angle of the ribbons, with the greatest reduction being from 84° to 35°. The ability to improve the wettability of the CNTs is of paramount importance for producing nanofluids, with relevance for a number of applications. Here, in particular, we investigate the efficacy of these samples as nanofluid additives for solar-thermal harvesting. Surface treatments by plasma-induced non-equilibrium electrochemistry are shown to enhance the stability of the nanofluids, allowing for full redispersion under simulated operating conditions. Furthermore, the enhanced dispersibility results in both a larger absorption coefficient and an improved thermal profile under solar simulation.

Surfactant-free synthesis of copper nanoparticles and gas phase integration in CNT-composite materials.

Copper nanoparticles (Cu-NPs) represent a viable low-cost alternative to replace bulk copper or other more expensive NPs (e.g. gold or silver) in various applications such as electronics for electrical contact materials or high conductivity materials. This study deals with the synthesis of well dispersed Cu-NPs by using an Ar + H2 microplasma using a solid copper precursor. The morphological analysis is carried out by electron microscopy showing particles with a mean diameter of 8 nm. Crystallinity and chemical analyses were also carried out by X-ray diffraction and X-ray photoelectron spectroscopy, respectively. In the second step, the Cu-NPs were successfully deposited onto porous carbon nanotube ribbons; surface coverage and the penetration depth of the Cu-NPs inside the CNT ribbon structure were investigated as these can be beneficial for a number of applications. The oxidation state of the Cu-NPs was also studied in detail under different conditions.

Melt-extrusion 3D printing of resorbable levofloxacin-loaded meshes: Emerging strategy for urogynaecological applications.

Current surgical strategies for the treatment of pelvic floor dysfunctions involve the placement of a polypropylene mesh into the pelvic cavity. However, polypropylene meshes have proven to have inadequate mechanical properties and have been associated to the arising of severe complications, such as infections. Furthermore, currently employed manufacturing strategies are unable to produce compliant and customisable devices. In this work, polycaprolactone has been used to produce resorbable levofloxacin-loaded meshes in two different designs (90° and 45°) via melt-extrusion 3D printing. Drug-loaded meshes were produced using a levofloxacin concentration of 0.5% w/w. Drug loaded meshes were successfully produced with highly reproducible mechanical and physico-chemical properties. Tensile test results showed that drug-loaded 45° meshes possessed a mechanical behaviour close to that of the vaginal tissue (E ≃ 8.32 ± 1.85 MPa), even after 4 weeks of accelerated degradation. Meshes released 80% of the loaded levofloxacin in the first 3 days and were capable of producing an inhibitory effect against S. Aureus and E. coli bacterial strains with an inhibition zone equal to 12.8 ± 0.45 mm and 15.8 ± 0.45 mm respectively. Thus, the strategy adopted in this work holds great promise for the manufacturing of custom-made surgical meshes with antibacterial properties.

Electroanalytical properties of chlorophenol red at disposable carbon electrodes: Implications for Escherichia coli detection.

The use of coliforms and Escherichia coli as indicator species for assessing the quality of water is well established and a large variety of methods based on ß-galactosidase (B-GAL) activity, inherent to the microbes within this classification, have arisen to enable their detection and enumeration. Chlorophenol red (CPR) is widely used as a chromogenic label, but its capacity for translation to electroanalytical devices has yet to be fully explored. The CPR moiety is capable of undergoing oxidation at carbon substrates (+0.7 V) giving rise to a variety of phenolic intermediates. Electrochemical, XPS and enzymatic techniques were employed to characterise the underpinning chemistry and the intermediate identified as a 1,2-quinone derivative in which the chlorine substituent is retained. The latter was found to accumulate at the electrode and, in contrast to the parent CPR, was found to be detected at a significantly less positive potential (+0.3 V). Bacterial hydrolysis of a CPR labelled substrate was demonstrated with the 1,2-quinone oxidation product found to accumulate at the electrode and detected using square wave voltammetry. Proof of concept for the efficacy of the alternative electrode pathway was established through the detection of E.coli after an incubation time of 2.5 h with no interference from the labelled substrates.