RESUMO
Current thrombolytic drugs exhibit suboptimal therapeutic outcomes and potential bleeding risks due to their limited circulation time, inadequate thrombus penetration, and off-target biodistribution. Herein, a photosensitizer-loaded, red cell membrane-encapsuled multiple magnetic nanoparticles aggregate is successfully developed for integrated mechanical/photothermal/photodynamic thrombolysis. Red cell membrane coating endows magnetic particles with prolonged blood circulation and superior biocompatibility. Under a preset rotating magnetic field (RMF), the aggregate with asymmetric magnetic distribution initiates rolling motion toward the blood clot interface, and because of magnetic dipole-dipole interactions, the aggregate tends to self-assemble into longer, flexible chain-like microrobotic swarm with powerful mechanical stir forces, thereby facilitating thrombus penetration and mechanical thrombolysis. Moreover, precise magnetic control enables targeted photosensitizer accumulation, allowing effective conversion of near-infrared (NIR) light into heat and reactive oxygen species (ROS) for thrombus phototherapy. In thrombolysis assays, the weight of thrombi is massively reduced by ≈90%. The work presents a safer and more promising combination of magnetic microrobotic technology and phototherapy for multi-modality thrombolysis.
RESUMO
More efficient soil remediation technologies are highly anticipated to treat large quantities of heavy metal-polluted urban sites nowadays. Herein, a novel hydrothermal technology of converting heavy metal-polluted soils into zeolites for in-situ immobilizing heavy metals was proposed. The zeolites (analcime and cancrinite) could be synthesized hydrothermally with certain Na/Si and Al/Si ratios. The formed zeolites could manage to change their species and structure during zeolitization to accommodate different heavy metals in soil according to their size and charge. Since smaller-size Cu2+ was introduced, analcime and some cancrinite possessing small cages could be formed adaptively to immobilize the Cu2+ by replacing Na+ and forming Cu2+-OH and Cu2+-O. Whereas, cancrinite with large channels managed to form to immobilize the larger-size Cd2+ by forming Cd2+-O. Interplanar spacing variation of zeolites also corresponded to their structural change for accommodating different heavy metals. Leaching results showed the amounts of Cu and Cd leached from the synthesized zeolites were reduced to 0.005% and 0.05% respectively, reflecting a more stable immobilization of smaller heavy metals by small cages, in agreement with the results of distribution coefficient (Kd). Negligible effect of pH environment on the leaching rates further confirmed the stable structural immobilization of heavy metals by zeolites.
Assuntos
Recuperação e Remediação Ambiental , Metais Pesados , Poluentes do Solo , Zeolitas , Solo/química , Poluentes do Solo/análise , Zeolitas/química , Cádmio , Metais Pesados/análise , TecnologiaRESUMO
The ability to monitor the physiological effect of the analgesic agent is of interest in clinical practice. Nonstationary changes would appear in photoplethysmography (PPG) during the analgesics-driven transition to analgesia. The present work studied the properties of nonlinear methods including approximate entropy (ApEn) and sample entropy (SampEn) derived from PPG responding to a nociceptive stimulus under various opioid concentrations. Forty patients with ASA I or II were randomized to receive one of the four possible remifentanil effect-compartment target concentrations (Ceremi) of 0, 1, 3, and 5 ng·ml-1 and a propofol effect-compartment target-controlled infusion to maintain the state entropy (SE) at 50 ± 10. Laryngeal mask airway (LMA) insertion was applied as a standard noxious stimulation. To optimize the performance of ApEn and SampEn, different coefficients were carefully evaluated. The monotonicity of ApEn and SampEn changing from low Ceremi to high Ceremi was assessed with prediction probabilities (PK). The result showed that low Ceremi (0 and 1 ng·ml-1) could be differentiated from high Ceremi (3 and 5 ng·ml-1) by ApEn and SampEn. Depending on the coefficient employed in algorithm: ApEn with k = 0.15 yielded the largest PK value (0.875) whereas SampEn gained its largest PK of 0.867 with k = 0.2. Thus, PPG-based ApEn and SampEn with appropriate k values have the potential to offer good quantification of analgesia depth under general anesthesia.
Assuntos
Analgesia , Propofol , Anestesia Geral , Entropia , Humanos , Fotopletismografia , Piperidinas , RemifentanilRESUMO
Emotion is a series of reactions triggered by a specific object or situation that affects a person's physiological state and can, therefore, be identified by physiological signals. This paper proposes an emotion recognition model. Extracted the features of physiological signals such as photoplethysmography, galvanic skin response, respiration amplitude, and skin temperature. The SVM-RFE-CBR(Recursive Feature Elimination-Correlation Bias Reduction-Support Vector Machine) algorithm was performed to select features and support vector machines for classification. Finally, the model was implemented on the DEAP dataset for an emotion recognition experiment. In the rating scale of valence, arousal, and dominance, the accuracy rates of 73.5%, 81.3%, and 76.1% were obtained respectively. The result shows that emotional recognition can be effectively performed by combining a variety of physiological signals.
Assuntos
Emoções , Nível de Alerta , Resposta Galvânica da Pele , Humanos , Fotopletismografia , Máquina de Vetores de SuporteRESUMO
BACKGROUND: Preeclampsia (PE) presence could lead to hemodynamic changes. Previous research suggested that morphological parameters based on photoplethysmographic pulse waves (PPGW) could help diagnose PE. AIM: To investigate the performance of a novel PPGPW-based parameter, falling scaled slope (FSS), in distinguishing PE. To investigate the advantages of the machine learning algorithm over the conventional statistical methods in the analysis. METHODS: Eighty-one pieces of PPGPW data were acquired for the study (PE, n = 44; normotensive, n = 37). The FSS values were calculated and used to construct a PE classifier using the K-nearest neighbors (KNN) algorithm. A predicted PE state varying from 0 to 1 was also calculated. The classifier's performance in distinguishing PE was evaluated using the ROC and AUC. A comparison was conducted with previously published PPGPW-based models. RESULT: Compared to the previous PPGPW-based parameters, FSS showed a better performance in distinguishing PE with an AUC value of 0.924, the best threshold of 0.498 could predict PE with a sensitivity of 84.1% and a specificity of 89.2%. As for the analysis method, training a classifier using the KNN algorithm had an advantage over the conventional statistical methods with the AUC values of 0.878 and 0.749, respectively. CONCLUSION: The result indicated that FSS might be an effective tool for identifying PE. Moreover, the machine learning algorithm could further help the data analysis and improve performance. [Figure: see text].
Assuntos
Pré-Eclâmpsia , Gravidez , Feminino , Humanos , Pré-Eclâmpsia/diagnóstico , AlgoritmosRESUMO
BACKGROUND: Some parameters have been extracted from photoplethysmography (PPG) with a good relativity with nociception, but without encouraging results in qualifying the balance of nociception-anti-nociception (NAN). The features of PPG have not been thoroughly depicted and more prospective univariate parameters deserve to be explored. The aim of this study was to investigate the ability of parameters derived from catacrotic phase of PPG to grade the level of analgesia. METHODS: 45 patients with ASA I or II were randomized to receive a remifentanil effect-compartment target controlled infusion (Ceremi) of 0, 1, or 3 ng/ml, and a propofol effect-compartment target controlled infusion to maintain an acceptable level of hypnosis with state entropy (SE) at 40~60. Laryngeal mask airway (LMA) insertion was applied as a noxious stimulus. Five diastole-related parameters, namely diastolic interval (DI), diastolic slope (DS), the minimum slope during catacrotic phase (DSmin), the interval between DSmin and its nearest trough (DTI), and area difference ratio (ADR), were extracted. Pulse beat interval (PBI) was calculated as a reference parameter. RESULTS: LMA insertion elicited a significant variation in all parameters except ADR during Ceremi of 0 and 1 ng/ml. Compared to PBI (prediction probability ([Formula: see text]) = 0.796), the parameters of DI, DS, and DTI presented a better consistence with the level of anti-nociceptive medication, with [Formula: see text] of 0.825, 0.822, and 0.822 respectively. CONCLUSION: The features extracted from catacrotic phase of PPG, including DI, DS, and DTI, could provide a promising potential to qualify the balance of NAN.
RESUMO
The purpose of the present study was to investigate the ability of three different normalization methods, namely root mean square (RMS) value, mean value, and maximum which referred to pulse beat interval (PBI), based on photoplethysmographic diastolic interval (DI) in response to laryngeal mask airway (LMA) insertion under various remifentanil concentrations during general anesthesia. Sixty patients were randomly allocated to one of the four groups to receive a possible remifentanil effect-compartment target concentration (Ceremi) of 0, 1, 3, or 5 ng/ml, and an effect-compartment target controlled infusion of propofol to maintain the state entropy (SE) at 40~60. Three normalized measures DIRMS, DIMean, and DIPBI were compared with the DI values without normalization. Before LMA insertion, only DI showed a considerable correlation with remifentanil concentrations. DIRMS and DIMean performed better than DI in discriminating 'insufficient' concentrations (0 and 1 ng/ml) from 'sufficient' concentrations (3 and 5 ng/ml). DIRMS was superior to all other variables in grading analgesic depth after nociceptive event occurred with PK value of 0.836. These results demonstrate that the normalization using RMS value, compared to using mean value and maximum, seems to provide a more effective approach for signal pre-processing.
Assuntos
Analgésicos Opioides , Anestesia Geral , Máscaras Laríngeas , Fotopletismografia , Propofol , Remifentanil , Analgésicos , Analgésicos Opioides/administração & dosagem , Humanos , Piperidinas , Remifentanil/administração & dosagemRESUMO
Localized administration of anti-inflammatory agents benefits patients after myocardial infarction (MI) by repressing/modulating inflammatory response of the MI region and thus accelerating repair of the impaired tissues. Colchicine (Col), an ancient natural drug, has excellent anti-inflammatory effects; however, its utilization is strictly limited due to its severe systemic toxicity and narrow therapeutic window. In this study, we developed an intramyocardial delivery system of Col using an injectable, thermosensitive poly(lactide-co-glycolide)-poly(ethylene glycol)-poly(lactide-co-glycolide) (PLGA-PEG-PLGA) polymer hydrogel as the vehicle for the treatment of MI while minimizing its systemic toxicity. The aqueous PLGA-PEG-PLGA solution loaded with Col (Col@Gel) underwent a sol-gel transition at 35 °C and maintained a gel state at body temperature. Col was released from the Col@Gel in an initial burst followed by a sustained release manner for over 8 days. The in vitro cell tests showed that the Col@Gel system significantly inhibited macrophage proliferation and migration. In a mouse model of MI, a single intramyocardial administration of the Col@Gel effectively alleviated cardiac inflammation, inhibited myocardial apoptosis and fibrosis, improved cardiac function and structure, and increased mouse survival without inducing severe systemic toxicity, which was observed following intraperitoneal administration of Col solution. These results suggested that the Col@Gel system is a reliable drug delivery system for the sustained local release of Col and has great potential as an anti-inflammatory therapy for the treat of MI.
Assuntos
Anti-Inflamatórios não Esteroides/farmacologia , Colchicina/farmacologia , Hidrogéis/química , Infarto do Miocárdio/tratamento farmacológico , Poliésteres/química , Polietilenoglicóis/química , Temperatura , Animais , Anti-Inflamatórios não Esteroides/administração & dosagem , Anti-Inflamatórios não Esteroides/química , Movimento Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Colchicina/administração & dosagem , Colchicina/química , Hidrogéis/administração & dosagem , Injeções Intralesionais , Injeções Subcutâneas , Masculino , Teste de Materiais , Camundongos , Camundongos Endogâmicos C57BL , Estrutura Molecular , Infarto do Miocárdio/patologia , Tamanho da Partícula , Poliésteres/administração & dosagem , Polietilenoglicóis/administração & dosagem , Propriedades de SuperfícieRESUMO
OBJECTIVE: To describe the comparative hierarchical area ratio (CHAR), a novel parameter derived from the photoplethysmographic (PPG) pulse wave and differences in CHAR values in parturients with and without preeclampsia (PE). METHODS: A total of 59 parturients (37 without and 22 with PE) was conducted at the Women's Hospital, Zhejiang University, School of Medicine in Hangzhou, China. We calculated the CHAR values derived from the PPG pulse wave and compared them in parturients with and without PE. RESULT: The values of CHAR derived from the parturients with PE were lower compared to those without PE (pâ¯<â¯0.01). The ROC analysis indicated that the best threshold for the mean value of CHAR was 7.92 to predict PE with a sensitivity of 86.4% and a specificity of 87.1%, while the threshold for the standard deviation of CHAR was 0.76 with a sensitivity of 77.3% and a specificity of 77.4%. The area under the curve (AUC) was 0.91 for mean value of CHAR while 0.78 for standard deviation of CHAR. Meanwhile, a contrast of AUC between CHAR and the former parameter we proposed showed CHAR had better performance in distinguishing PE (0.908 over 0.615, pâ¯<â¯0.01). CONCLUSION: The novel parameter, CHAR, derived from PPG pulse wave differs in parturients with and without PE with high sensitivity and specificity, suggesting that the CHAR might be an effective tool in differentiating the presence of PE.
Assuntos
Fotopletismografia , Pré-Eclâmpsia/diagnóstico , Análise de Onda de Pulso/métodos , Adulto , Área Sob a Curva , Estudos de Casos e Controles , Diagnóstico Diferencial , Feminino , Humanos , Gravidez , Proteinúria/urina , Curva ROC , Sensibilidade e Especificidade , Estatísticas não ParamétricasRESUMO
The present study was aimed to evaluate the abilities of photoplethysmography (PPG)-derived parameters, including sample entropy of PPG (SampEn), amplitude of PPG (PPGA), pulse beat interval (PBI) and diastolic interval (DI) extracted by nonlinear or linear methods, to monitor the balance between nociception and antinociception. 26 ASA I or II patients were randomized into one of the three groups to receive a remifentanil effect-compartment target controlled infusion (Ceremi) of 1, 3 and 5 ng/ml and an effect-compartment target controlled propofol infusion (Ceprop) to keep the state entropy (SE) at 50 (40~60). Laryngeal mask airway (LMA) insertion was applied as a noxious stimulus. The percentage of change in SampEn (â³SampEn, AUC=0.896), PBI (â³PBI, AUC=0.896) and DI (ΔDI, AUC=0.972), but not in PPGA (â³PPGA, AUC=0.667), were statistically excellent in discriminating low Ceremi (1 ng/ml) from higher Ceremi (3 and 5 ng/ml). Additionally, the prediction probabilities (Pk) values of â³SampEn, ΔPBI and ΔDI were high as well with 0.795, 0.754 and 0.813 for discriminating Ceremi. These results demonstrated that nonlinear and linear parameters of SampEn, PBI and DI had strong dependency on Ceremi in response to LMA insertion and could provide nociceptive information during propofol-remifentanil anesthesia. This indicated that PPG-derived parameters were potential to develop the clinical assessment of nociception-antinociception balance under general anesthesia.
Assuntos
Anestésicos Intravenosos , Máscaras Laríngeas , Fotopletismografia , Propofol , Remifentanil , Anestésicos Intravenosos/administração & dosagem , Humanos , Piperidinas , Propofol/administração & dosagem , Remifentanil/administração & dosagemRESUMO
The Fukushima nuclear accident in Japan on March 11, 2011 produced huge amounts of Cs-polluted incineration ashes; conventional solidification methods seem unsuitable for the treatment of large amounts of Cs-polluted ashes. A novel hydrothermal method was developed to directly convert Cs-polluted incineration ash (rice husk ash) into pollucite to immobilize Cs in its crystal structure in situ. Results revealed that pollucite could be synthesized readily over a wide range of added Cs (Cs/Si=0.2-0.6); the addition of more Cs (Cs/Si≥0.5) caused the formation of a small amount of cesium aluminosilicate (CsAlSiO4), which exhibits poor immobilization behavior for Cs. Pollucite could be formed even for a short curing time (1h) or at a low curing temperature (150°C). However, a high curing temperature or a long curing time favored the formation of a pure pollucite. With the added calcium hydroxide, a tough specimen with a flexural strength of approximately 22MPa could be obtained, which suggested that this technology may be applied directly to the solidification of Cs-polluted incineration ashes. Hydrogarnet and tobermorite formations enhanced the strength of the solidified specimens, and meanwhile the formed pollucite was present in a matrix steadily. Leaching test demonstrated that the amount of Cs that leached from the synthesized specimens was very low (0.49×10(-5)-2.31×10(-5)) and even lower than that from the reference hollandite-rich synroc (2.0×10(-2)), although a higher content of Cs was found in the synthesized pollucite specimens (6.0-31.7%) than in the reference (3.7%). Therefore, the hydrothermal conversion of Cs-polluted incineration ash into pollucite can be applied to immobilize Cs directly.