Glycolipid-Containing Nanoparticle Vaccine Engages Invariant NKT Cells to Enhance Humoral Protection against Systemic Bacterial Infection but Abrogates T-Independent Vaccine Responses.

CD4+ T cells enable the critical B cell humoral immune protection afforded by most effective vaccines. We and others have recently identified an alternative source of help for B cells in mice, invariant NK T (iNKT) cells. iNKT cells are innate glycolipid-specific T cells restricted to the nonpolymorphic Ag-presenting molecule CD1d. As such, iNKT cells respond to glycolipids equally well in all people, making them an appealing adjuvant for universal vaccines. We tested the potential for the iNKT glycolipid agonist, α-galactosylceramide (αGC), to serve as an adjuvant for a known human protective epitope by creating a nanoparticle that delivers αGC plus antigenic polysaccharides from Streptococcus pneumoniae αGC-embedded nanoparticles activate murine iNKT cells and B cells in vitro and in vivo, facilitate significant dose sparing, and avoid iNKT anergy. Nanoparticles containing αGC plus S. pneumoniae polysaccharides elicits robust IgM and IgG in vivo and protect mice against lethal systemic S. pneumoniae However, codelivery of αGC via nanoparticles actually eliminated Ab protection elicited by a T-independent S. pneumoniae vaccine. This is consistent with previous studies demonstrating iNKT cell help for B cells following acute activation, but negative regulation of B cells during chronic inflammation. αGC-containing nanoparticles represent a viable platform for broadly efficacious vaccines against deadly human pathogens, but their potential for eliminating B cells under certain conditions suggests further clarity on iNKT cell interactions with B cells is warranted.

Do urban agglomeration planning policies promote the discharge reduction of industrial wastewater: Evidence from the Yellow River Basin in China.

The environmental effects of the urban agglomeration planning policy (UAPP) are an exploration by rapidly developing China and a concern for countries seeking development and urban reform around the world. This paper takes the three regional urban agglomerations in the Yellow River Basin (YRB) as the research object and collects the panel data of 106 prefecture-level cities from 2006 to 2019 to study the reduction effects of UAPP on the industrial wastewater discharge (IWD). The empirical results from Difference-in-Differences models indicate that UAPP can significantly inhibit IWD. UAPP reduces IWD by promoting green innovation, and the development of service industries can strengthen this effect. UAPP shows a stronger IWD reduction effect in the northeast YRB than that in the southwest region. Compared to urban agglomerations with a single provincial jurisdiction, UAPP exerts stronger IWD reduction effects on urban agglomerations with multiple jurisdictions. Moreover, there exist spatial spillover effects of UAPP on IWD. These findings provide support and references for urban reform and the development of green cities in countries around the world, especially in developing countries.

Aversion to ambiguity and model misspecification in dynamic stochastic environments.

Preferences that accommodate aversion to subjective uncertainty and its potential misspecification in dynamic settings are a valuable tool of analysis in many disciplines. By generalizing previous analyses, we propose a tractable approach to incorporating broadly conceived responses to uncertainty. We illustrate our approach on some stylized stochastic environments. By design, these discrete time environments have revealing continuous time limits. Drawing on these illustrations, we construct recursive representations of intertemporal preferences that allow for penalized and smooth ambiguity aversion to subjective uncertainty. These recursive representations imply continuous time limiting Hamilton-Jacobi-Bellman equations for solving control problems in the presence of uncertainty.

Surface modification of a polyethylene film for anticoagulant and anti-microbial catheter.

A functional anticoagulant and anti-bacterial coating for polyethylene (PE) films is described. The stepwise preparation of this nanocomposite surface coating involves O2 plasma etching of PE film, carbodiimide coupling of cysteamine to the etched PE film, binding of Ag to sulfhydryl groups of cysteamine, and assembly of heparin capped AgNPs on the PE film. The nanocomposite film and its components were characterized by 1H-nuclear magnetic resonance spectroscopy, attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and field emission-scanning electron microscopy. The resulting PE films demonstrate anticoagulant activity using a hemoglobin whole blood clotting assay, and anti-bacterial activity against Bacillus cereus 3551 (Gram-positive) and Escherichia coli BL21 (Gram-negative) bacteria. The hydrophilicity of the heparin coated PE was determined by contact angle measurements; and the stability of the nanocomposite film, with respect to Ag leaching, was assessed by atomic absorption spectroscopy.

Rapid and accurate determination of the lignin content of lignocellulosic biomass by solid-state NMR.

Biofuels and biomaterials, produced from lignocellulosic feedstock, require facile access to cellulose and hemicellulose to be competitive with petroleum processing and sugar-based fermentation. Physical-chemical barriers resulting from lignin complicates the hydrolysis biomass into fermentable sugars. Thus, the amount of lignin within a substrate is critical in determining biomass processing. The application of 13C cross-polarization, magic-angle spinning, and solid-state nuclear magnetic resonance for the direct quantification of lignin content in biomass is examined. Using a standard curve constructed from pristine lignin and cellulose, the lignin content of a biomass sample is accurately determined through direct measurement without chemical or enzymatic pre-treatment.

Green finance reform and application intensity of chemical fertilizer and pesticide: policy evidence from China.

The environmental hazards resulting from the excessive application of pesticides and fertilizers have been an inevitable agricultural production issue in various countries around the world. New technologies and policies are constantly trying to improve their application efficiency. This paper utilizes panel data of the provincial level in China from 2009 to 2019 to empirically study the effect of green finance reform policies on the chemical fertilizer application intensity (FAI) and pesticide application intensity (PAI). Standard difference-in-differences (DID), synthetic DID, difference-in-difference-in differences (DDD), and spatial DID models are constructed for specific empirical analysis. The findings can be concluded as follows: (1) A unit of the green finance reform policy reduces FAI by 0.0144 and PAI by 1.7921 by promoting green technology innovation. (2) Government financial extractive capacity hinders the reduction effect of green finance on PAI. (3) Coastal geographical location is conducive to reducing PAI through green finance reform. (4) FAI and PAI show positive spatial autocorrelations, and the influence of green finance reform overflows to surrounding areas. The research results can provide policy references for countries around the world to promote the green development of agriculture and reduce environmental pollution.

Ultrasensitive detection and quantification of acidic disaccharides using capillary electrophoresis and quantum dot-based fluorescence resonance energy transfer.

Rapid and highly sensitive detection of the carbohydrate components of glycoconjugates is critical for advancing glycobiology. Fluorescence (or Förster) resonance energy transfer (FRET) is commonly used in detection of DNA, in protein structural biology, and in protease assays but is less frequently applied to glycan analysis due to difficulties in inserting two fluorescent tags into small glycan structures. We report an ultrasensitive method for the detection and quantification of a chondroitin sulfate disaccharide based on FRET, involving a CdSe-ZnS core-shell nanocrystal quantum dot (QD) streptavidin conjugate donor and a Cy5 acceptor. The disaccharide was doubly labeled with biotin and Cy5. QDs then served to concentrate the target disaccharide, enhancing the overall energy transfer efficiency, with unlinked QDs and Cy5 hydrazide producing nearly zero background signal in capillary electrophoresis using laser-induced fluorescence detection with two different band-pass filters. This method is generally applicable to the ultrasensitive analysis of acidic glycans and offers promise for the high-throughput disaccharide analysis of glycosaminoglycans.

Adsorption of doxorubicin on poly(methyl methacrylate)-chitosan-heparin-coated activated carbon beads.

Extracorporeal filter cartridges, filled with an activated carbon bead (ACB) adsorbent, have been used for removal of overdosed cancer drugs from the blood. Coatings on adsorbent matrices, poly(methyl methacrylate) (PMMA)/activated carbon bead and PMMA/chitosan/heparin/ACB composites, were tested to improve their biocompatibility and blood compatibility. PMMA coating on ACBs was accomplished in a straightforward manner using a PMMA solution in ethyl acetate. A one-step hybrid coating of ACBs with PMMA-anticoagulant heparin required the use of acetone and water co-solvents. Multilayer coatings with three components, PMMA, chitosan, and heparin, involved three steps: PMMA was first coated on ACBs; chitosan was then coated on the PMMA-coated surface; and finally, heparin was covalently attached to the chitosan coating. Surface morphologies were studied by scanning electron microscopy. X-ray photoelectron spectroscopy confirmed the -SO(3)(-) group. Adsorption, of a chemotherapy drug (doxorubicin) from both water and phosphate-buffered saline, by the coated ACBs was examined. The adsorption isotherm curves were fitted using the Freundlich model. The current adsorption system might find potential applications in the removal of high-dose regional chemotherapy drugs while maintaining high efficiency, biocompatibility, and blood compatibility.

Preparation and characterization of electrospun core sheath nanofibers from multi-walled carbon nanotubes and poly(vinyl pyrrolidone).

Electrospinning is a versatile technique to prepare polymer fibers in nano to micrometer size ranges using very high electrostatic fields. Electrospun nanofibers with tunable porosity and high specific surface area have various applications, including chromatographic supports for protein separation, biomedical devices, tissue engineering and drug delivery matrices, and as key components in solar cells and supercapacitors. Unspinnable materials such as nanoparticles, nanorods, nanotubes or rigid conducting polymers can also be electrospun into fibers through co-axial electrospinning. In this study, we have prepared core-sheath nanofibers utilizing co-axial electrospinning. The core portion of these electrospun fibers consists of multi-walled carbon nanotubes and the sheath portion is poly(vinyl pyrrolidone) (PVP). Various morphologies were obtained by changing both core and sheath solution concentrations. The core-sheath nanofibers were characterized by scanning electron microscopy and transmission electron microscopy, to confirm core-sheath morphology, thermogravimetric analysis, and mechanical strength testing. The electrical conductivity of the surfaces of poly(vinyl pyrrolidone) fibers and poly(vinyl pyrrolidone)-multi-walled nanotube fibers were both 10(-15) S/m. The highest bulk conductivity observed for the poly(vinyl pyrrolidone)-multi-walled nanotube fibers was 1.2 x 10(-3) S/m.

Facile pretreatment of lignocellulosic biomass at high loadings in room temperature ionic liquids.

Ionic liquids (ILs) have emerged as attractive solvents for lignocellulosic biomass pretreatment in the production of biofuels and chemical feedstocks. However, the high cost of ILs is a key deterrent to their practical application. Here, we show that acetate based ILs are effective in dramatically reducing the recalcitrance of corn stover toward enzymatic polysaccharide hydrolysis even at loadings of biomass as high as 50% by weight. Under these conditions, the IL serves more as a pretreatment additive rather than a true solvent. Pretreatment of corn stover with 1-ethyl-3-methylimidizolium acetate ([Emim] [OAc]) at 125 ± 5°C for 1 h resulted in a dramatic reduction of cellulose crystallinity (up to 52%) and extraction of lignin (up to 44%). Enzymatic hydrolysis of the IL-treated biomass was performed with a common commercial cellulase/xylanase from Trichoderma reesei and a commercial ß-glucosidase, and resulted in fermentable sugar yields of ∼80% for glucose and ∼50% for xylose at corn stover loadings up to 33% (w/w) and 55% and 34% for glucose and xylose, respectively, at 50% (w/w) biomass loading. Similar results were observed for the IL-facilitated pretreatment of switchgrass, poplar, and the highly recalcitrant hardwood, maple. At 4.8% (w/w) corn stover, [Emim][OAc] can be readily reused up to 10 times without removal of extracted components, such as lignin, with no effect on subsequent fermentable sugar yields. A significant reduction in the amount of IL combined with facile recycling has the potential to enable ILs to be used in large-scale biomass pretreatment.

Conductive cable fibers with insulating surface prepared by coaxial electrospinning of multiwalled nanotubes and cellulose.

Core-sheath multiwalled carbon nanotube (MWNT)-cellulose fibers of diameters from several hundreds of nanometers to several micrometers were prepared by coaxial electrospinning from a nonvolatile, nonflammable ionic liquid (IL) solvent, 1-methyl-3-methylimidazolium acetate ([EMIM][Ac]). MWNTs were dispersed in IL to form a gel solution. This gel core solution was electrospun surrounded by a sheath solution of cellulose dissolved in the same IL. Electrospun fibers were collected in a coagulation bath containing ethanol-water to remove the IL completely and dried to form core-sheath MWNT-cellulose fibers having a cable structure with a conductive core and insulating sheath. Enzymatic treatment of a portion of a mat of these fibers with cellulase selectively removed the cellulose sheath exposing the MWNT core for connection to an electrode. These MWNT-cellulose fiber mats demonstrated excellent conductivity because of a conductive pathway of bundled MWNTs. Fiber mat conductivity increased with increasing ratio of MWNT in the fibers with a maximum conductivity of 10.7 S/m obtained at 45 wt % MWNT loading.

Electrospinning of nanomaterials and applications in electronic components and devices.

Electrospinning of nanomaterial composites are gaining increased interest in the fabrication of electronic components and devices. Performance improvement of electrospun components results from the unique properties associated with nanometer-scaled features, high specific surface areas, and light-weight designs. Electrospun nanofiber membrane-containing polymer electrolytes show improved ionic conductivity, electrochemical stability, low interfacial resistance, and improved charge-discharge performance than those prepared from conventional membranes. Batteries with non-woven electrospun separators have increased cycle life and higher rate capabilities than ones with conventional separators. Electrospun nanofibers may also be used as working electrodes in lithium-ion batteries, where they exhibit excellent rate capability, high reversible capacity, and good cycling performance. Moreover, the high surface area of electrospun activated carbon nanofibers improves supercapacitor energy density. Similarly, nanowires having quasi-one-dimensional structures prepared by electrospinning show high conductivity and have been used in ultra-sensitive chemical sensors, optoelectronics, and catalysts. Electrospun conductive polymers can also perform as flexible electrodes. Finally, the thin, porous structure of electrospun nanofibers provides for the high strain and fast response required for improved actuator performance. The current review examines recent advances in the application of electrospinning in fabricating electronic components and devices.

A practical new strategy to prevent bile duct injury during laparoscopic cholecystectomy. A single-center experience with 5539 cases.

Purpose Bile duct injury (BDI) is a catastrophic complication of cholecystectomy, and misidentification of the cystic anatomy is considered to be the main cause. Although several techniques have been developed to prevent BDI, such as the "critical view of safety", the infundibular technique, the rates remain higher during laparoscopic cholecystectomy (LC) than during open surgery. We, here, propose a practical new strategy for ductal identification, that can help to prevent laparoscopic bile duct injury. Methods A retrospective study of 5539 patients who underwent LC from March 2007 to February 2019 at a single institution was conducted. The gallbladder infundibulum was classified by its position located on an imaginary clock with the gallbladder neck as the center point of the dial, 3-o'clock position as cranial, 6-o'clock as dorsal, 9-o'clock as caudal, and 12-o'clock as ventral, as well as the axial position. Patient demographics, pathologic variables and infundibulum classification were evaluated. Detailed analysis of ductal identification based on gallbladder infundibulum position was performed in this study. All infundibulum positions were recorded by intraoperative laparoscopic video or photographic images. Results All the patients successfully underwent LC during the study period. No conversion or serious complications such as biliary injury occurred. Gallbladders with infundibulum of 3-o'clock position, 6-o'clock position, 9-o'clock position, 12-o'clock position, axial position were 12.3%, 23.4%, 28.0%, 4.2%, and 32.1%, respectively. The 3-o'clock and 12-o'clock position were pitfalls that might cause biliary injury. Conclusion The gallbladder infundibulum as a navigator is useful for ductal identification to reduce BDI and improve the safety of LC.

Determination of amitraz and 2,4-dimethylaniline residues in honey by using LC with UV detection and MS/MS.

A method for the determination and confirmation of amitraz and its degradation product 2,4-dimethylaniline (2,4-DMA) in honey is reported. Determination of the two compounds was based on HPLC with UV detection and MS/MS (LC-MS/MS) after a liquid-liquid extraction with hexane and isopropyl alcohol. Chromatographic separation was achieved by using a C18 column with a gradient mobile phase consisting of 0.02 M ammonium acetate and ACN. Recoveries for fortified honey ranged from 83.4 to 103.4% for amitraz and from 89.2 to 104.7% for 2,4-DMA with RSD values lower than 11.6% for HPLC and LC-MS/MS methods. LOD was 6 microg/kg for amitraz and 8 microg/kg for 2,4-DMA, while LOQ was 20 microg/kg for amitraz and 25 microg/kg for 2,4-DMA in HPLC method. LOD was 1 microg/kg for amitraz and 2 microg/kg for 2,4-DMA, while LOQ was 5 microg/kg for amitraz and 10 microg/kg for 2,4-DMA in LC-MS/MS method.

[Status of diagnosis and management of acute appendicitis in 2017: a national multi-center retrospective study].

OBJECTIVE: To analyze the current status of diagnosis and management of acute appendicitis (AA) in China. METHODS: Questionnaire survey was used to retrospectively collect data of hospitalized patients with AA from 43 medical centers nationwide in 2017 (Sort by number of cases provided: Jinling Hospital of Medical School of Nanjing University, The First Affiliated Hospital of Xinjiang Medical University, Lu'an People's Hospital, Tengzhou Central People's Hospital, Dalian Central Hospital, The Affiliated Hospital of Xuzhou Medical University, Dongying People's Hospital, Jinjiang Hospital of Traditional Chinese Medicine, Huangshan Shoukang Hospital, Xuyi People's Hospital, Nanjing Jiangbei People's Hospital, Lanzhou 940th Hospital of PLA, Heze Municipal Hospital, The First College of Clinical Medical Science of China Three Gorges University, Affiliated Jiujiang Hospital of Nanchang University, The Second People's Hospital of Hefei, Affiliated Central Hospital of Shandong Zaozhuang Mining Group, The Third People's Hospital of Kunshan City, Xuzhou First People's Hospital, The 81st Group Army Hospital of PLA, Linyi Central Hospital, The General Hospital of Huainan Eastern Hospital Group, The 908th Hospital of PLA, Liyang People's Hospital, The 901th Hospital of Joint Logistic Support Force, The Third Affiliated Hospital of Chongqing Medical University, The Fourth Hospital of Jilin University, Harbin Acheng District People's Hospital, The First Affiliated Hospital of Zhengzhou University, Nanjing Luhe People's Hospital, Taixing Municipal People's Hospital, Baotou Central Hospital, The Affiliated Hospital of Nantong University, Linyi People's Hospital, The 72st Group Army Hospital of PLA, Zaozhuang Municipal Hospital, People's Hospital of Dayu County, Taixing City Hospital of Traditional Chinese Medicine, Suzhou Municipal Hospital, Beijing Guang'anmen Hospital, Langxi County Hospital of Traditional Chinese Medicine, Nanyang Central Hospital, The Affiliated People's Hospital of Inner Mongolia Medical University).The diagnosis and management of AA were analyzed through unified summary. Different centers collected and summarized their data in 2017 and sent back the questionnaires for summary. RESULTS: A total of 8 766 AA patients were enrolled from 43 medical centers, including 4 711 males (53.7%) with median age of 39 years and 958 (10.9%) patients over 65 years old. Of 8 776 patients, 5 677 cases (64.6%) received one or more imaging examinations, and the other 3 099 (35.4%) did not receive any imaging examination. A total of 1 858 (21.2%) cases received medical treatment, mainly a combination of nitroimidazoles (1 107 cases, 59.8%) doublet regimen, followed by a single-agent regimen of non-nitroimidazoles (451 cases, 24.4%), a nitroimidazole-free doublet regimen (134 cases, 7.2%), a triple regimen of combined nitroimidazoles (116 cases, 6.3%), nitroimidazole alone (39 cases, 2.1%) and nitroimidazole-free triple regimen (3 cases, 0.2%). Of the 6 908 patients (78.8%) who underwent surgery, 4 319 (62.5%) underwent laparoscopic appendectomy and 2589 (37.5%) underwent open surgery. Ratio of laparotomy was higher in those patients under 16 years old (392 cases) or over 65 years old (258 cases) [15.1%(392/2 589) and 10.0%(258/2 589), respectively, compared with 8.5%(367/4 316) and 8.0%(347/4 316) in the same age group for laparoscopic surgery, χ²=91.415, P<0.001; χ²=15.915,P<0.001]. Patients with complicated appendicitis had higher ratio of undergoing open surgery as compared to those undergoing laparoscopic surgery [26.7%(692/2 589) vs. 15.6%(672/4 316), χ²=125.726, P<0.001].The cure rates of laparoscopic and open surgery were 100.0% and 99.8%(2 585/2 589) respectively without significant difference (P=0.206). Postoperative complication rates were 4.5%(121/2 589) and 4.7%(196/4 316) respectively, and the difference was not statistically significant (χ²=0.065, P=0.799). The incidence of surgical site infection was lower (0.6% vs. 1.7%, χ²=17.315, P<0.001), and hospital stay was shorter [6(4-7) days vs. 6(5-8) days, U=4 384 348.0, P<0.001] in the laparoscopic surgery group, while hospitalization cost was higher (median 12 527 yuan vs. 9 342 yuan, U=2 586 809.0, P<0.001). CONCLUSIONS: The diagnosis of acute appendicitis is still clinically based, supplemented by imaging examination. Appendectomy is still the most effective treatment at present. Laparoscopic appendectomy has become the main treatment strategy, but anti-infective drugs are also very effective.

Sonoelectrochemical synthesis of CdSe nanotubes.

CdSe nanotubes were successfully synthesized by a sonoelectrochemical technique for the first time; the formation process of the CdSe nanotubes was carefully studied and a sonication-induced roll-up mechanism is proposed.

Synthesis of novel chalcogenide 'lifebelts' and their electrogenerated chemiluminescence.

Novel chalcogenide lifebelts have been prepared by using a simple sacrificial template method, and their electrogenerated chemiluminescence properties were studied.

Fabrication of Cd(OH)2 nanorings by ultrasonic chiselling on Cd(OH)2 nanoplates.

Cd(OH)2 nanorings were successfully fabricated from Cd(OH)2 nanoplates by ultrasonic chiselling, a unique effect of the sonochemical process that has never been reported before.

Sonochemical synthesis of CdS and CdSe nanowires.

A convenient sonochemical route was developed to fabricate one-dimensional (1D) CdS or CdSe assemblies via a simple template method with two-steps: Firstly, the colloid one dimensional cadmium hydroxide particles were prepared as templates under sonication; then, the colloid particles were converted into 1D CdS or CdSe assemblies via a replacement reaction after the surface nucleation and crystal growth processes. The as-prepared CdS and CdSe nanowires were characterized by XRD, TEM, XPS, and UV-visible Spectroscopy. The effects of the ultrasonic irradiation were discussed. It is believed that the ultrasound irradiation played a positive role in both the assembly of the colloid cadmium hydroxide particles into the 1D structure and the growth of CdSe and CdS nanowires. The effects of pH on the morphologies of the cadmium hydroxide template were also discussed. The band gaps of the as-prepared 1D CdSe and CdS assemblies were calculated to be 3.1 eV and 4.9 eV, respectively, indicating the quantum size effect. The as-prepared products might have potential applications in nanodevices in future.

A practical new strategy to prevent bile duct injury during laparoscopic cholecystectomy. A single-center experience with 5539 cases

Abstract Purpose Bile duct injury (BDI) is a catastrophic complication of cholecystectomy, and misidentification of the cystic anatomy is considered to be the main cause. Although several techniques have been developed to prevent BDI, such as the "critical view of safety", the infundibular technique, the rates remain higher during laparoscopic cholecystectomy (LC) than during open surgery. We, here, propose a practical new strategy for ductal identification, that can help to prevent laparoscopic bile duct injury. Methods A retrospective study of 5539 patients who underwent LC from March 2007 to February 2019 at a single institution was conducted. The gallbladder infundibulum was classified by its position located on an imaginary clock with the gallbladder neck as the center point of the dial, 3-o'clock position as cranial, 6-o'clock as dorsal, 9-o'clock as caudal, and 12-o'clock as ventral, as well as the axial position. Patient demographics, pathologic variables and infundibulum classification were evaluated. Detailed analysis of ductal identification based on gallbladder infundibulum position was performed in this study. All infundibulum positions were recorded by intraoperative laparoscopic video or photographic images. Results All the patients successfully underwent LC during the study period. No conversion or serious complications such as biliary injury occurred. Gallbladders with infundibulum of 3-o'clock position, 6-o'clock position, 9-o'clock position, 12-o'clock position, axial position were 12.3%, 23.4%, 28.0%, 4.2%, and 32.1%, respectively. The 3-o'clock and 12-o'clock position were pitfalls that might cause biliary injury. Conclusion The gallbladder infundibulum as a navigator is useful for ductal identification to reduce BDI and improve the safety of LC.