Conjugation of Carbon Dots with ß-Galactosidase Enzyme: Surface Chemistry and Use in Biosensing.

Nanoparticles have been conjugated to biological systems for numerous applications such as self-assembly, sensing, imaging, and therapy. Development of more reliable and robust biosensors that exhibit high response rate, increased detection limit, and enhanced useful lifetime is in high demand. We have developed a sensing platform by the conjugation of ß-galactosidase, a crucial enzyme, with lab-synthesized gel-like carbon dots (CDs) which have high luminescence, photostability, and easy surface functionalization. We found that the conjugated enzyme exhibited higher stability towards temperature and pH changes in comparison to the native enzyme. This enriched property of the enzyme was distinctly used to develop a stable, reliable, robust biosensor. The detection limit of the biosensor was found to be 2.9 × 10-4 M, whereas its sensitivity was 0.81 µA·mmol-1·cm-2. Further, we used the Langmuir monolayer technique to understand the surface properties of the conjugated enzyme. It was found that the conjugate was highly stable at the air/subphase interface which additionally reinforces the suitability of the use of the conjugated enzyme for the biosensing applications.

Surface Chemistry and Spectroscopic Study of a Cholera Toxin B Langmuir Monolayer.

In this article, we explored the surface chemistry properties of a cholera toxin B (CTB) monolayer at the air-subphase interface and investigated the change in interfacial properties through in situ spectroscopy. The study showed that the impact of the blue shift was negligible, suggesting that the CTB molecules were minimally affected by the subphase molecules. The stability of the CTB monolayer was studied by maintaining the constant surface pressure for a long time and also by using the compression-decompression cycle experiments. The high stability of the Langmuir monolayer of CTB clearly showed that the driving force of CTB going to the amphiphilic membrane was its amphiphilic nature. In addition, no major change was detected in the various in situ spectroscopy results (such as UV-vis, fluorescence, and IR ER) of the CTB Langmuir monolayer with the increase in surface pressure. This indicates that no aggregation occurs in the Langmuir monolayer of CTB.

Study of the aggregation of human insulin Langmuir monolayer.

The human insulin (HI) Langmuir monolayer at the air-water interface was systematically investigated in the presence and absence of Zn(II) ions in the subphase. HI samples were dissolved in acidic (pH 2) and basic (pH 9) aqueous solutions and then spread at the air-water interface. Spectroscopic data of aqueous solutions of HI show a difference in HI conformation at different pH values. Moreover, the dynamics of the insulin protein showed a dependence on the concentration of Zn(II) ions. In the absence of Zn(II) ions in the subphase, the acidic and basic solutions showed similar behavior at the air-water interface. In the presence of Zn(II) ions in the subphase, the surface pressure-area and surface potential-area isotherms suggest that HI may aggregate at the air-water interface. It was observed that increasing the concentration of Zn(II) ions in the acidic (pH 2) aqueous solution of HI led to an increase of the area at a specific surface pressure. It was also seen that the conformation of HI in the basic (pH 9) medium had a reverse effect (decrease in the surface area) with the increase of the concentration of Zn(II) ions in solution. From the compression-decompression cycles we can conclude that the aggregated HI film at air-water interface is not stable and tends to restore a monolayer of monomers. These results were confirmed from UV-vis and fluorescence spectroscopy analysis. Infrared reflection-absorption and circular dichroism spectroscopy techniques were used to determine the secondary structure and orientation changes of HI by zinc ions. Generally, the aggregation process leads to a conformation change from α-helix to ß-strand and ß-turn, and at the air-water interface, the aggregation process was likewise seen to induce specific orientations for HI in the acidic and basic media. A proposed surface orientation model is presented here as an explanation to the experimental data, shedding light for further research on the behavior of insulin as a Langmuir monolayer.

Interfacial behavior of Proteinase K enzyme at air-saline subphase.

This study investigates the interfacial behavior of the proteinase K enzyme at air-water interface. Adsorption of enzyme on the surface was induced using saline subphase. The surface packing and stability of the enzyme was investigated using of surface pressure-area (π-A) and surface potential-area (ΔV-A) isotherms. Proteinase K enzyme forms film at air-aqueous interface and demonstrates good stability as shown through compression-decompression cycle experiments. To characterize the surface assembly morphology of the interfacial enzymes UV-vis and fluorescence spectroscopic techniques were used. The data revealed that the enzyme Langmuir monolayer has good homogeneity with no evidence of aggregates during compression. The secondary structure of the enzyme at interface was determined to be α-helix using p-polarized infrared-reflection absorption spectroscopy. This was confirmed through Circular dichroism spectra of the enzyme Langmuir-Blodgett (LB) film which showed that the major conformation present were α-helices.

Human cardiac troponin I: a Langmuir monolayer study.

Human cardiac troponin I (cTnI) is the preferred biomarker in the assessment of myocardial infarction. It is known to interact with troponin C and T to form a trimeric complex. Whereas small amounts are found in the cytoplasm, most of cTnI is in the form of a complex with actin located in myofilaments. To understand these interactions of cTnI better, we first investigated the surface chemistry of cTnI as a Langmuir monolayer spread at the air-water interface. We investigated the optimal conditions for obtaining a stable Langmuir monolayer in terms of changing the ionic strength of the subphase using different concentrations of potassium chloride. Monolayer stability was investigated by compressing the cTnI monolayer to a specific surface pressure and keeping the surface pressure constant while measuring the decrease in the molecular area as a function of time. Aggregation and/or domain formation was investigated by using compression-decompression cycles, in situ UV-vis spectroscopy, Brewster angle microscopy (BAM), and epifluorescence microscopy. To ensure that the secondary structure is maintained, we used infrared reflection-absorption spectroscopy (IRRAS) directly at the air-subphase interface. It was found that cTnI forms a very stable monolayer (after more that 5000 s) that does not aggregate at the air-subphase interface. The cTnI molecules maintain their secondary structure and, on the basis of the low reflectivity observed using BAM measurements and the low reflection-absorption intensities measured with IRRAS spectroscopy, lie flat on the subphase with the alpha-helices parallel to the air-subphase interface.

Infrared reflection-absorption spectroscopy and polarization-modulated infrared reflection-absorption spectroscopy studies of the aequorin langmuir monolayer.

The Langmuir monolayer of aequorin and apoaequorin was studied by infrared reflection-absorption spectroscopy (IRRAS) and polarization-modulated IRRAS techniques. The alpha-helices in the aequorin Langmuir monolayer were parallel to the air-water interface at zero surface pressure. When the surface pressure increased to 15 mN.(m-1), the alpha-helices became tilted and the turns became parallel to the air-water interface. As for apoaequorin, the alpha-helices were also parallel to the air-water interface at 0 mN.m(-1). However, the alpha-helix became tilted and the turns became parallel to the air-water interface quickly at 5 mN.m(-1). With further compression of the apoaequorin Langmuir monolayer, the orientation remained the same. The different behaviors of aequorin and apoaequorin at the air-water interface were explained by the fact that aequorin formed dimers at the air-water interface but apoaequorin was a monomer. It is more difficult for a dimer to be tilted by the compression of the Langmuir monolayer.

Antibody-gold quantum dot-PAMAM dendrimer complex as an immunoglobulin immunoassay.

Gold quantum dots (AuQDs) were synthesized and electrostatically conjugated to goat-derived anti-human IgG for the purpose of detecting human IgG in solution over a broad range of concentrations. The system is able to detect human IgG by linear fluorescence quenching over a micromolar to nanomolar concentration range. We have demonstrated the specificity and a wide dynamic range of the proposed immunoassay. The quenching is a result of competitive surface quenching of the AuQDs. Characterization, details of the immunoassay, and the quenching mechanism, are discussed.

Deconvolution of fluorescence spectra: contribution to the structural analysis of complex molecules.

Fluorescence spectroscopy is a sensitive analytical tool in the studies of both simple and complex molecular structures. In complex molecules, however, determining the number and position of components may give a specific insight into the structure, complementary to the other analytical techniques. We applied log-normal model to analyze fluorescence of simple monofluorophore molecule. In order to analyze spectra where both fluorophores and Raman emission bands were present, we developed a method obtained by combination of the symmetric, Gaussian, for Raman and asymmetric, log-normal model, for fluorescence, applicable to the molecules of different complexity. Technically, for each sample we varied excitation wavelength with 5 nm step and recorded the corresponding emission spectra. They were subsequently used for component analysis. Position of each component was plotted against the excitation wavelength. Applying this approach we could identify minimal number of components having stable positions, while their approximate probability density (APD) in a spectral series was correlated with the probable number of fluorophores in the molecule. The method was tested on molecules containing different number of fluorophores: monomers involved in the synthesis of plant polymer lignin-coniferyl alcohol (one fluorophore), ferulic acid (two fluorophores) and on lignin model compound produced from these monomers (many fluorophores). All investigated species belong to benzene-substituted class of compounds, and it is reasonable to assume that they have similar fluorescence band contour. We also report the results of environmental scanning electron microscopy (ESEM) studies showing multilayered dehydrogenative polymer (DHP) structure, in order to show complexity of the polymer. Our results present complementarity of these two approaches in the structural studies of the lignin model compound.

A novel, compact disk-like centrifugal microfluidics system for cell lysis and sample homogenization.

In this paper, we present the design and characterization of a novel platform for mechanical cell lysis of even the most difficult to lyse cell types on a micro or nanoscale (maximum 70 microL total volume). The system incorporates a machined plastic circular disk assembly, magnetic field actuated microfluidics, centrifugal cells and tissue homogenizer and centrifugation system. The mechanism of tissue disruption of this novel cell homogenization apparatus derives from the relative motion of ferromagnetic metal disks and grinding matrices in a liquid medium within individual chambers of the disk in the presence of an oscillating magnetic field. The oscillation of the ferromagnetic disks or blades produces mechanical impaction and shear forces capable of disrupting cells within the chamber both by direct action of the blade and by the motion of the surrounding lysis matrix, and by motion induced vortexing of buffer fluid. Glass beads or other grinding media are integrated into each lysis chamber within the disk to enhance the transfer of energy from the oscillating metal blade to the cells. The system also achieves the centrifugal elimination of solids from each liquid sample and allows the elution of clarified supernatants via siphoning into a collection chamber fabricated into the plastic disk assembly. This article describes system design, implementation and validation of proof of concept on two samples--Escherichia coli and Saccharomyces cerevisiae representing model systems for cells that are easy and difficult to lyse, respectively.

Immunoasssay based on the antibody-conjugated PAMAM-dendrimer-gold quantum dot complex.

An immunoassay based upon photoluminescent gold quantum dots aimed at detecting human IgG in aqueous solution from micromolar to nanomolar concentrations is described.

ß-Galactosidase Langmuir Monolayer at Air/X-gal Subphase Interface.

This article investigates the surface chemistry properties of the ß-galactosidase monolayer at the air-subphase interface at the vicinity of its substrate, X-gal. We have demonstrated that the ß-galactosidase in the monolayer form remained active and performed hydrolysis of the X-gal in the subphase. We investigated the ß-galactosidase Langmuir monolayer in absence and presence of X-gal in the subphase of varying concentration of X-gal with the sodium chloride solution. It was found that the limiting molecular area as well as the collapse surface pressure kept on decreasing with the increasing concentration of X-gal. In accordance to the data obtained from the isotherm it was also found that ß-galactosidase forms a stable monolayer that does not aggregate at the air-subphase interface. The stability of the monolayer at the air-subphase interface was studied by using compression-decompression cycles with and without X-gal at varying concentration and different surface pressures. The infrared reflection-absorption spectroscopy (IRRAS) and Brewster angle microscopy (BAM) of ß-galactosidase Langmuir monolayer was also investigated for pure and mixed ß-galactosidase at the air-subphase.

New insights into the structural organization of the plant polymer lignin.

The organizational features of lignin structure and the mechanism of its synthesis have significant implications for the response of the plant to stress. It was unknown whether the enzymic formation of lignin in the cell wall is an uncontrolled process or finely regulated in time and space. In vitro scanning tunneling microscopy (STM), atomic force microscopies (AFM), near-field scanning optical microscopy (NSOM). and the novel environmental scanning electron microscopy (ESEM) imaging studies of the lignin model compounds have directly shown its highly ordered structure and elucidated its modular and fractal organization. Direct evidence was presented for the existence of strong intermolecular forces responsible for holding lignin globules together in highly ordered structures. Fractal analysis was applied as a theoretical approach, to show regularity and modular organization of lignin. Surface chemistry studies of the lignin monolayer reveal intrinsic properties that may be a key to osmotic pressure and cell size control mechanism in the higher plant cells. The obtained data contribute to the explanation of the mechanisms of cell wall synthesis in vivo.

Surface chemistry and spectroscopy of the ß-galactosidase Langmuir monolayer.

The changes of interfacial properties of ß-galactosidase introduced into different pH environments are investigated through surface chemistry and in situ spectroscopy. Conditions for an optimal Langmuir monolayer formation were firstly obtained by varying the subphase salt concentration and the surface-pressure area isotherm was used to extrapolate the limiting molecular area of the enzyme monolayer to be around 42,000 Å(2) molecule(-1). Surface pressure stability measurements held at 20 mN/m for 90 min along with compression-decompression cycles revealed no aggregate formation at the air-water interface. Consistent with the data obtained from the isotherm, in situ UV-Vis and fluorescence spectroscopy shows a steep rise in absorbance and photoluminescence intensity correlating to with a switch from a liquid-expanded to a liquid-condensed phase. A decrease in subphase pH increased the electrostatic repulsion as the enzyme was protonated, leading to an expanded monolayer. Infrared absorption-reflection spectroscopy demonstrates that the enzyme adopts mainly ß-sheet conformation at the air-water interface before and during the compression.

ZL-DHP lignin model compound at the air-water interface.

In this paper we present our surface chemistry studies of enzymatically polymerized, poly-coniferyl alcohol lignin model compound (dehydrogenate polymer a.k.a. ZL-DHP) at the air-water interface. Using the CHCl(3)/MeOH (5:1 v/v) spreading solvent, we found an average molecular area of ZL-DHP of approximately 1200 A(2). The monolayer expresses a high compressibility with a collapsed area of 500 A(2) and collapsed surface pressure of 28 mN m(-1). In the range of applied surface pressures, ZL-DHP polymer have no phase changes, as shown by the very high linearity (R=0.994) of absorbance vs. surface pressure cure. There was no symmetry transitions observed as shown by absence of shifts of absorption peak maximums.

Study of the lignin model compound supramolecular structure by combination of near-field scanning optical microscopy and atomic force microscopy.

In this paper, we present a nanoscale study of the supramolecular structure of the dehydrogenate polymer (ZL-DHP) lignin model compound. The combination of near-field scanning optical microscopy (NSOM or SNOM) and atomic force microscopy (AFM) has been utilized to explore physicochemical properties of the lignin model compound on a scale ranging from individual macromolecules to globular supramolecular assemblies. By utilizing NSOM in transmission mode, the optical inhomogeneity in the lignin supramolecular structure has been observed for the first time. In particular, the transmission-mode NSOM images reveal a combination of hollow and layered supramolecular globular structure in the lignin model compound. Through the paired use of TappingMode and pulsed-mode AFM, we have also confirmed the existence of regions with different rheological properties on the single lignin model compound supramolecular assembly.

Correlated atomic force microscopy and fluorescence lifetime imaging of live bacterial cells.

We report on imaging living bacterial cells by using a correlated tapping-mode atomic force microscopy (AFM) and confocal fluorescence lifetime imaging microscopy (FLIM). For optimal imaging of Gram-negative Shewanella oneidensis MR-1 cells, we explored different methods of bacterial sample preparation, such as spreading the cells on poly-L-lysine coated surfaces or agarose gel coated surfaces. We have found that the agarose gel containing 99% ammonium acetate buffer can provide sufficient local aqueous environment for single bacterial cells. Furthermore, the cell surface topography can be characterized by tapping-mode in-air AFM imaging for the single bacterial cells that are partially embedded. Using in-air rather than under-water AFM imaging of the living cells significantly enhanced the contrast and signal-to-noise ratio of the AFM images. Near-field AFM-tip-enhanced fluorescence lifetime imaging (AFM-FLIM) holds high promise on obtaining fluorescence images beyond optical diffraction limited spatial resolution. We have previously demonstrated near-field AFM-FLIM imaging of polymer beads beyond diffraction limited spatial resolution. Here, as the first step of applying AFM-FLIM on imaging bacterial living cells, we demonstrated a correlated and consecutive AFM topographic imaging, fluorescence intensity imaging, and FLIM imaging of living bacterial cells to characterize cell polarity.

A structural study of amphiphilic PAMAM (poly(amido amine)) dendrimers in Langmuir and Langmuir-Blodgett films.

Two amphiphilic PAMAM dendrimers are synthesized by attaching 12-hydroxydodecanoic acid (HA) chains to a poly(amido amine) (PAMAM) dendrimer core (including generation I and generation II). The limiting molecular area obtained from the surface pressure-area isotherm at the air/water interface suggests the edge-on configuration for both dendrimers in Langmuir films. The edge-on arrangement is also supported by the atomic force microscopic (AFM) studies of the Langmuir-Blodgett films.

Strong and selective adsorption of lysozyme on graphene oxide.

Biosensing methods and devices using graphene oxide (GO) have recently been explored for detection and quantification of specific biomolecules from body fluid samples, such as saliva, milk, urine, and serum. For a practical diagnostics application, any sensing system must show an absence of nonselective detection of abundant proteins in the fluid matrix. Because lysozyme is an abundant protein in these body fluids (e.g., around 21.4 and 7 µg/mL of lysozyme is found in human milk and saliva from healthy individuals, and more than 15 or even 100 µg/mL in patients suffering from leukemia, renal disease, and sarcoidosis), it may interfere with detections and quantification if it has strong interaction with GO. Therefore, one fundamental question that needs to be addressed before any development of GO based diagnostics method is how GO interacts with lysozyme. In this study, GO has demonstrated a strong interaction with lysozyme. This interaction is so strong that we are able to subsequently eliminate and separate lysozyme from aqueous solution onto the surface of GO. Furthermore, the strong electrostatic interaction also renders the selective adsorption of lysozyme on GO from a mixture of binary and ternary proteins. This selectivity is confirmed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), fluorescence spectroscopy, and UV-vis absorption spectroscopy.

Human insulin fibril-assisted synthesis of fluorescent gold nanoclusters in alkaline media under physiological temperature.

Fluorescent insulin fibrils gold nanoclusters (Au NCs) have been synthesized through the reduction of gold by human insulin in fibrillated form. Likewise, nanocluster formation has been regulated by insulin, working as a protein-based template. Environment- and surface-controlled experiments have shown the optimized synthesis conditions is comprised of a pure aqueous alkaline solvent for insulin under constant heat at physiological temperature (37°C) prior to addition of the Au precursor (HAuCl4), followed by subsequent heating (37°C) and vigorous stirring after the addition of HAuCl4 until the completion of the synthetic approach. Microscopy experiments detected the presence of primordial fibril structures in samples of heated human insulin in the alkaline medium prior to addition of HAuCl4, while encountering more developed insulin fibrils in the terminal production of Au NCs. This investigation provides insight to the development of a novel synthesis of Au NCs in the alkaline medium, while providing a graphical description of the environmental and surface-dependent effects that were presented in the synthesis of human insulin nanoclusters. The study provides pertinent information for future synthetic procedures, as the protein state of several protein-nanoparticle systems may reflect on the results that were obtained herein.

Human islet amyloid polypeptide at the air-aqueous interface: a Langmuir monolayer approach.

Human islet amyloid polypeptide (hIAPP) is the source of the major component of the amyloid deposits found in the islets of Langerhans of around 95 per cent type 2 diabetic patients. The formation of aggregates and mature fibrils is thought to be responsible for the dysfunction and death of the insulin-producing pancreatic ß-cells. Investigation on the conformation, orientation and self-assembly of the hIAPP at time zero could be beneficial for our understanding of its stability and aggregation process. To obtain these insights, the hIAPP at time zero was studied at the air-aqueous interface using the Langmuir monolayer technique. The properties of the hIAPP Langmuir monolayer at the air-aqueous interface on a NaCl subphase with pH 2.0, 5.6 and 9.0 were examined by surface pressure- and potential-area isotherms, UV-Vis absorption, fluorescence spectroscopy and Brewster angle microscopy. The conformational and orientational changes of the hIAPP Langmuir monolayer under different surface pressures were characterized by p-polarized infrared-reflection absorption spectroscopy, and the results did not show any prominent changes of conformation or orientation. The predominant secondary structure of the hIAPP at the air-aqueous interface was α-helix conformation, with a parallel orientation to the interface during compression. These results showed that the hIAPP Langmuir monolayer at the air-aqueous interface was stable, and no aggregate or domain of the hIAPP at the air-aqueous interface was observed during the time of experiments.