Adapted MR velocimetry of slow liquid flow in porous media.

MR velocimetry of liquid flow in opaque porous filters may play an important role in better understanding the mechanisms of deep bed filtration. With this knowledge, the efficiency of separating the suspended solid particles from the vertically flowing liquid can be improved, and thus a wide range of industrial applications such as wastewater treatment and desalination can be optimized. However, MR velocimetry is challenging for such studies due to the low velocities, the severe B0 inhomogeneity in porous structures, and the demand for high spatial resolution and an appropriate total measurement time during which the particle deposition will change velocities only marginally. In this work, a modified RARE-based MR velocimetry method is proposed to address these issues for velocity mapping on a deep bed filtration cell. A dedicated RF coil with a high filling factor is constructed considering the limited space available for the vertical cell in a horizontal MR magnet. Several means are applied to optimize the phase contrast RARE MRI pulse sequence for accurately measuring the phase contrast in a long echo train, even in the case of a low B1 homogeneity. Two means are of particular importance. One uses data acquired with zero flow to correct the phase contrast offsets from gradient imperfections, and the other combines the phase contrast from signals of both odd and even echoes. Results obtained on a 7T preclinical MR scanner indicate that the low velocities in the heterogeneous system can be correctly quantified with high spatial resolution and an adequate total measurement time, enabling future studies on flow during the filtration process.

Multi-loaded ceramic beads/matrix scaffolds obtained by combining ionotropic and freeze gelation for sustained and tuneable vancomycin release.

For a targeted release against bacteria-associated bone diseases (osteomyelitis) ceramic beads with a high drug loading capacity, loaded with vancomycin as model antibiotic, are synthesized as drug carrier and successfully incorporated in an open porous hydroxyapatite matrix scaffold via freeze gelation to prevent bead migration at the implantation site and to extend drug release. We demonstrate that the quantity of loaded drug by the hydroxyapatite and ß-tricalcium phosphate beads, produced by ionotropic gelation, as well as drug release can be tuned and controlled by the selected calcium phosphate powder, sintering temperature, and high initial vancomycin concentrations (100mg/ml) used for loading. Bead pore volume up to 68mm(3)/g, with sufficiently large open pores (pore size of up to 650nm with open porosity of 72%) and high surface area (91m(2)/g) account likewise for a maximum drug loading of 236mg/g beads or 26mg/sample. Multi-drug loading of the beads/matrix composite can further increase the maximum loadable amount of vancomycin to 37mg/sample and prolong release and antibacterial activity on Bacillus subtilis up to 5days. The results confirmed that our approach to incorporate ceramic beads as drug carrier for highly increased drug load in freeze-gelated matrix scaffolds is feasible and may lead to a sustained drug release and antibacterial activity.

Hierarchical Porous Zeolite Structures for Pressure Swing Adsorption Applications.

Porous adsorbents with hierarchical structured macropores ranging from 1 to 100 µm are prepared using a combination of freeze casting and additional sacrificial templating of polyurethane foams, with a zeolite 13X powder serving as adsorbent. The pore system of the prepared monoliths features micropores assigned to the zeolite 13X particle framework, interparticular pores of ∼1-2 µm, lamellar pores derived from freeze casting of ∼10 µm, and an interconnected pore network obtained from the sacrificial templates ranging from around 100 to 200 µm with a total porosity of 71%. Gas permeation measurements show an increase in intrinsic permeability by a factor of 14 for monoliths prepared with an additional sacrificial templated foam compared to monoliths solely providing freeze casting pores. Cyclic CO2 adsorption and desorption tests where pressure swings between 8 and 140 kPa reveal constant working capacities over multiple cycles. Furthermore, the monoliths feature a high volumetric working capacity of ∼1.34 mmol/cm(3) which is competitive to packed beds made of commercially available zeolite 13X beads (∼1.28 mmol/cm(3)). Combined with the faster CO2 uptake showing an adsorption of 50% within 5-8 s (beads ∼10 s), the monoliths show great potential for pressure swing adsorption applications, where high volumetric working capacities, fast uptakes, and low pressure drops are needed for a high system performance.