Photoelectric Conversion System Composed of Gene-Recombined Photosystem I and Platinum Nanoparticle Nanosheet.

Photosynthesis is one of the most vital processes in nature, which consists of two main photoreaction centers called photosystem I and photosystem II. The high quantum yield of photosystem I (PSI) makes it attractive for bioelectronic applications. However, the native PSI (N-PSI) loses its robust photochemical properties once fabricated into devices. This property degradation results from the difficulty in controlling the orientation of PSI. With the optimal orientation of PSI, photoexcited electrons can easily reach the electrode, yielding good photoelectric conversion efficiency. We developed a novel photoelectrode by integrating a newly designed gene-recombined PSI (G-PSI) with platinum nanoparticles (PtNPs) on substrates using a simple stacking method, which can control the orientation of PSI on the electrode. The target orientation of the attached G-PSI toward the substrate was confirmed by the absorption spectra of polarized light. An approximately 2-fold increase in the internal quantum yield (IQY) was observed for the G-PSI-attached electrode under 680 nm irradiation compared with that of the N-PSI-modified electrode. In addition, a 4-fold enhancement of the IQY was detected for cytochrome c (Cyt c) stacking on the G-PSI because of the electrostatic interaction, suggesting that Cyt c successfully secured the electron-transfer pathway.

Conjugates between photosystem I and a carbon nanotube for a photoresponse device.

Photosystem I (PS I) is a large pigment-protein complex embedded in the thylakoid membranes that performs light-driven electron transfer across the thylakoid membrane. Carbon nanotubes exhibit excellent electrical conductivities and excellent strength and stiffness. In this study, we generated PSI-carbon nanotube conjugates dispersed in a solution aimed at application in artificial photosynthesis. PS I complexes in which a carbon nanotube binding peptide was introduced into the middle of the PsaE subunit were conjugated on a single-walled carbon nanotube, orienting the electron acceptor side to the nanotube. Spectral and photoluminescence analysis showed that the PS I is bound to a single-walled carbon nanotube, which was confirmed by transmission electron microscopy. Photocurrent observation proved that the photoexcited electron originated from PSI and transferred to the carbon nanotube with light irradiation, which also confirmed its orientated conjugation. The PS I-carbon nanotube conjugate will be a useful nano-optoelectronic device for the development of artificial systems.

Photocurrent Generation of Reconstituted Photosystem II on a Self-Assembled Gold Film.

Photosystem II (PSII)-modified gold electrodes were prepared by the deposition of PSII reconstituted with platinum nanoparticles (PtNPs) on Au electrodes. PtNPs modified with 1-[15-(3,5,6-trimethyl-1,4-benzoquinone-2-yl)]pentadecyl disulfide ((TMQ(CH2)15S)2) were incorporated into the QB site of PSII isolated from thermophilic cyanobacterium Thermosynechococcus elongatus. The reconstitution was confirmed by QA-reoxidation measurements. PSII reconstituted with PtNPs was deposited and integrated on a Au(111) surface modified with 4,4'-biphenyldithiol. The cross section of the reconstituted PSII film on the Au electrode was investigated by SEM. Absorption spectra showed that the surface coverage of the electrode was about 18 pmol PSII cm-2. A photocurrent density of 15 nAcm-2 at E = +0.10 V (vs Ag/AgCl) was observed under 680 nm irradiation. The photoresponse showed good reversibility under alternating light and dark conditions. Clear photoresponses were not observed in the absence of PSII and molecular wire. These results supported the photocurrent originated from PSII and moved to a gold electrode by light irradiation, which also confirmed conjugation with orientation through the molecular wire.

Effective Method for Micro-Patterning Arene-Terminated Monolayers on a Si(111) Electrode.

Microstructured electrodes are significant to modern electrochemistry. A representative aromatic group, 4-ferrocenylphenyl one, was covalently bound to a micropatterned silicon electrode via the arylation of a hydrogen-terminated silicon(111) surface formed selectively on a Si wafer. Starting from a silicon(100)-on-insulator (SOI) wafer, the aromatic monolayer was attached sequentially by spin-coating a resist, electron beam lithography, Cr/Au deposition, lift-off, anisotropic etching with aqueous KOH solution, and Pd-catalyzed arylation. Cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) are used to characterize the coupling reaction between 4-ferrocenyl group and silicon substrate, and to confirm performance of the final modified microsized electrode. These data show that this synthetic protocol gives chemically well-defined and robust functionalized monolayers on a silicon semiconducting surface with a small electrode.

Bio-inspired photoresponse of porphyrin-attached gold nanoparticles on a field-effect transistor.

A bio-inspired photoresponse was engineered in porphyrin-attached Au nanoparticles (AuNPs) on a field-effect transistor (FET). The system mimics photosynthetic electron transfer, using porphyrin derivatives as photosensitizers and AuNPs as photoelectron counting devices. Porphyrin-protected AuNPs were immobilized onto the gate of an FET via the formation of self-assembled monolayers. Photoinduced electron transfer from the porphyrin led to single electron transfer at the Au nanoparticles, which was monitored via a changing gate voltage on the FET in the presence of organic electrolyte. The further attachment of other functional molecules to this system should enable various other potential functionalities. This article is part of a special issue entitled: photosynthesis research for sustainability: keys to produce clean energy.

π-Conjugated nickel bis(dithiolene) complex nanosheet.

A π-conjugated nanosheet comprising planar nickel bis(dithiolene) complexes was synthesized by a bottom-up method. A liquid-liquid interfacial reaction using benzenehexathiol in the organic phase and nickel(II) acetate in the aqueous phase produced a semiconducting bulk material with a thickness of several micrometers. Powder X-ray diffraction analysis revealed that the crystalline portion of the bulk material comprised a staggered stack of nanosheets. A single-layer nanosheet was successfully realized using a gas-liquid interfacial reaction. Atomic force microscopy and scanning tunneling microscopy confirmed that the π-conjugated nanosheet was single-layered. Modulation of the oxidation state of the nanosheet was possible using chemical redox reactions.

Synthesis of diazenido-ligated vanadium nanoparticles.

Metallic vanadium nanoparticles stabilized with 4-octylphenyldiazenido groups (particle size: 1.7 ± 0.2 nm) were synthesized via the reduction of VCl4 with superhydride (LiBHEt3) in the presence of 4-octylphenyldiazonium salt in an Ar-filled glovebox. The resulting particles were characterized using TEM, elemental analysis, and XPS measurements. The unusual reaction on the surface resulted in the passivation of V-N═N-Ar covalent bonds.

Nanoparticle assemblies via coordination with a tetrakis(terpyridine) linker bearing a rigid tetrahedral core.

Controlling particle-particle interactions is a major challenge in achieving the programmable assembly of nanoparticles, which shows great potential for device fabrication and detection systems. We present here a simple chemical method that allows the formation of Pd nanoparticle assemblies using a tetrakis(terpyridine) linker with a rigid tetrahedral core.

A new method to generate arene-terminated Si(111) and Ge(111) surfaces via a palladium-catalyzed arylation reaction.

Formation of silicon-aryl and germanium-aryl direct bonds on the semiconductor surface is a key issue to realize molecular electronic devices, but the conventional methods based on radical intermediates have problems to accompany the side reactions. We developed the first example of versatile and efficient methods to form clean organic monolayers with Si-aryl and Ge-aryl bonds on hydrogen-terminated silicon and germanium surfaces by applying our original catalytic arylation reactions of hydrosilanes and hydrogermanes using Pd catalyst and base in homogeneous systems. We could immobilize aromatic groups with redox-active and photoluminescent properties, and further applied in the field of rigid π-conjugated redox molecular wire composites, as confirmed by the successive coordination of terpyridine molecules with transition metal ions. The surfaces were characterized using cyclic voltammetry (CV), water contact angle measurements, X-ray photoelectron spectroscopy (XPS), fluorescence spectroscopy, and atomic force microscopy (AFM). Especially, the AFM analysis of 17 nm-long metal complex molecular wires confirmed their vertical connection to the plane surface.

Surface immobilization of PSI using vitamin K1-like molecular wires for fabrication of a bio-photoelectrode.

We present a bio-photoelectrode made of photosystem I complex (PSI) of cyanobacteria, Thermosynechococcus elongatus, and molecular wires. The newly designed and synthesized molecular wire similar to vitamin K1 (VK1) has a naphthoquinone moiety that can connect to PSI, and a terpyridine moiety for connection to a Co(II) ion. Surface immobilization of PSI and molecular wires was performed by a self-assembled monolayer (SAM) formation process at indium tin oxide (ITO) followed by stepwise coordination reactions. The PSI-immobilized ITO showed a photocurrent action spectrum, whose profile was consistent with that of PSI. We have demonstrated a new method for the immobilization of PSI on the electrode surface, useful in the construction of phovoltaic cells or photon-sensing devices.

Photosensing System Using Photosystem I and Gold Nanoparticle on Graphene Field-Effect Transistor.

In this study, a light sensor is fabricated based on photosystem I (PSI) and a graphene field-effect transistor (FET) that detects light at a high quantum yield under ambient conditions. We immobilized PSI on a micrometer-sized graphene FET using Au nanoparticles (AuNPs) and measured the I-V characteristics of the modified graphene FET before and after light irradiation. The source-drain current (Isd) increased upon illumination, exhibiting a photoresponsivity of 4.8 × 102 A W-1, and the charge neutrality point of graphene shifted by -12 mV. This system represents the first successful photosensing system based on proteins and a solution-gated graphene FET. The probable mechanism of this negative shift can be explained by the increase in negative charge carriers in graphene induced by a hole trap in the AuNP resulting from electron transfer from the AuNP to PSI. Photoresponses were only observed in the presence of two surface-active agents, n-hexyltrimethylammonium bromide and sodium dodecylbenzenesulfonate, because they caused the formation of a hydrophobic environment on the surface of the graphene. The lipid layer of these agents caused dissociation of ascorbate ions from the graphene sheet, thereby expanding the Debye screening length of the electrolyte solution. The hydrophobic environment above graphene also enhanced hole storage in the AuNP through electron transfer from the AuNP to PSI.

Direct synthesis of alkylsilanes by platinum-catalyzed coupling of hydrosilanes and iodoalkanes.

Alkyl iodides and tertiary silanes were successfully coupled with good functional group tolerance using a Pt(P(tBu)(3))(2)/(iPr)(2)EtN/CH(3)CN system. The utility of the methodology is demonstrated by the synthesis of silafluofen, a Si-containing insecticide.

A photosensing system composed of photosystem I, molecular wire, gold nanoparticle, and double surfactants in water.

Photosensing performance of a system composed of photosystem I (PSI), vitamin K(1) (VK(1))-like molecular wire, and gold nanoparticles (AuNPs) in an aqueous solution was increased considerably by the addition of double surfactants, hexylamine and dodecylbenzenesulfonate.