Double-walled carbon nanotubes under hydrostatic pressure: Raman experiments and simulations.

We have used Raman spectroscopy to study the behavior of double-walled carbon nanotubes (DWNT) under hydrostatic pressure. We find that the rate of change of the tangential mode frequency with pressure is higher for the sample with traces of polymer compared to the pristine sample. We have performed classical molecular dynamics simulations to study the collapse of single (SWNT) and double-walled carbon nanotube bundles under hydrostatic pressure. The collapse pressure (pc) was found to vary as 1/R3, where R is the SWNT radius or the DWNT effective radius. The bundles showed approximately 30% hysteresis and the hexagonally close packed lattice was completely restored on decompression. The pc of a DWNT bundle was found to be close to the sum of its values for the inner and the outer tubes considered separately as SWNT bundles, demonstrating that the inner tube supports the outer tube and that the effective bending stiffness of DWNT, D(DWNT) - 2D(SWNT).

Bulk production of a strong covalently linked (C60H(x))2 dimer.

The high-pressure treatment of C60 in an H2 atmosphere at high temperatures leads to the efficient formation of a covalently bound dimer and some oligomeric species. The resulting hydrogenated C120 is an example of the bulk production of covalently bound derivatized fullerene cores. Matrix-assisted laser desorption/ionization in conjunction with reflectron time-of-flight mass spectrometry has been applied to the product analysis. The dissociation pattern of selected C120H(2x)+ ions (x > 30) indicates the dimeric structure of (C60H(x))2, as opposed to a giant hydrofullerene species possessing a fused C120 core. However, the results also clearly indicate a much stronger bonding (multiple sigma bonding) between the C60H(x) units than present in cycloaddition products. Evidence of a covalently linked dimer was obtained in labeling experiments, on the basis of which any laser-induced gas-phase aggregation of the C60H(x) monomer during the analysis is discounted.

Key factors limiting carbon nanotube yarn strength: exploring processing-structure-property relationships.

Studies of carbon nanotube (CNT) based composites have been unable to translate the extraordinary load-bearing capabilities of individual CNTs to macroscale composites such as yarns. A key challenge lies in the lack of understanding of how properties of filaments and interfaces across yarn hierarchical levels govern the properties of macroscale yarns. To provide insight required to enable the development of superior CNT yarns, we investigate the fabrication-structure-mechanical property relationships among CNT yarns prepared by different techniques and employ a Monte Carlo based model to predict upper bounds on their mechanical properties. We study the correlations between different levels of alignment and porosity and yarn strengths up to 2.4 GPa. The uniqueness of this experimentally informed modeling approach is the model's ability to predict when filament rupture or interface sliding dominates yarn failure based on constituent mechanical properties and structural organization observed experimentally. By capturing this transition and predicting the yarn strengths that could be obtained under ideal fabrication conditions, the model provides critical insights to guide future efforts to improve the mechanical performance of CNT yarn systems. This multifaceted study provides a new perspective on CNT yarn design that can serve as a foundation for the development of future composites that effectively exploit the superior mechanical performance of CNTs.

Extraordinary improvement of the graphitic structure of continuous carbon nanofibers templated with double wall carbon nanotubes.

Carbon nanotubes are being widely studied as a reinforcing element in high-performance composites and fibers at high volume fractions. However, problems with nanotube processing, alignment, and non-optimal stress transfer between the nanotubes and surrounding matrix have so far prevented full utilization of their superb mechanical properties in composites. Here, we present an alternative use of carbon nanotubes, at a very small concentration, as a templating agent for the formation of graphitic structure in fibers. Continuous carbon nanofibers (CNF) were manufactured by electrospinning from polyacrylonitrile (PAN) with 1.2% of double wall nanotubes (DWNT). Nanofibers were oxidized and carbonized at temperatures from 600 °C to 1850 °C. Structural analyses revealed significant improvements in graphitic structure and crystal orientation in the templated CNFs, with the largest improvements observed at lower carbonization temperatures. In situ pull-out experiments showed good interfacial bonding between the DWNT bundles and the surrounding templated carbon matrix. Molecular Dynamics (MD) simulations of templated carbonization confirmed oriented graphitic growth and provided insight into mechanisms of carbonization initiation. The obtained results indicate that global templating of the graphitic structure in fine CNFs can be achieved at very small concentrations of well-dispersed DWNTs. The outcomes reveal a simple and inexpensive route to manufacture continuous CNFs with improved structure and properties for a variety of mechanical and functional applications. The demonstrated improvement of graphitic order at low carbonization temperatures in the absence of stretch shows potential as a promising new manufacturing technology for next generation carbon fibers.

Bio-inspired carbon nanotube-polymer composite yarns with hydrogen bond-mediated lateral interactions.

Polymer composite yarns containing a high loading of double-walled carbon nanotubes (DWNTs) have been developed in which the inherent acrylate-based organic coating on the surface of the DWNT bundles interacts strongly with poly(vinyl alcohol) (PVA) through an extensive hydrogen-bond network. This design takes advantage of a toughening mechanism seen in spider silk and collagen, which contain an abundance of hydrogen bonds that can break and reform, allowing for large deformation while maintaining structural stability. Similar to that observed in natural materials, unfolding of the polymeric matrix at large deformations increases ductility without sacrificing stiffness. As the PVA content in the composite increases, the stiffness and energy to failure of the composite also increases up to an optimal point, beyond which mechanical performance in tension decreases. Molecular dynamics (MD) simulations confirm this trend, showing the dominance of nonproductive hydrogen bonding between PVA molecules at high PVA contents, which lubricates the interface between DWNTs.

A multiscale study of high performance double-walled nanotube-polymer fibers.

The superior mechanical behavior of carbon nanotubes (CNT) and their electrical and thermal functionalities has motivated researchers to exploit them as building blocks to develop advanced materials. Here, we demonstrate high performance double-walled nanotube (DWNT)-polymer composite yarns formed by twisting and stretching of ribbons of randomly oriented bundles of DWNTs thinly coated with polymeric organic compounds. A multiscale in situ scanning electron microscopy experimental approach was implemented to investigate the mechanical performance of yarns and isolated DWNT bundles with and without polymer coatings. DWNT-polymer yarns exhibited significant ductility of ∼20%, with energy-to-failure of as high as ∼100 J g(-1), superior to previously reported CNT-based yarns. The enhanced ductility is not at the expense of strength, as yarns exhibited strength as high as ∼1.4 GPa. In addition, the significance of twisting on the densification of yarns and corresponding enhancement in the lateral interactions between bundles is identified. Experiments at nanometer and macroscopic length scales on DWNT-polymer yarns and bundles further enabled quantification of energy dissipation/storage mechanisms in the yarns during axial deformations. We demonstrate that while isolated DWNT bundles are capable of storing/dissipating up to ∼500 J g(-1) at failure, unoptimal load transfer between individual bundles prevents the stress build up in the yarns required for considerable energy storage at the bundle level. By contrast, through polymer lateral interactions, a much better performance is obtained with the majority of energy dissipated at failure being contributed by the interactions between the polymer coating and the DWNTs as compared to the direct van der Waals interactions between bundles.

Anomalously soft dynamics of water in a nanotube: a revelation of nanoscale confinement.

Quasi-one-dimensional water encapsulated inside single-walled carbon nanotubes, here referred to as nanotube water, was studied by neutron scattering. The results reveal an anomalously soft dynamics characterized by pliable hydrogen bonds, anharmonic intermolecular potentials, and large-amplitude motions in nanotube water. Molecular dynamics simulations consistently describe the observed phenomena and propose the structure of nanotube water, which comprises a square-ice sheet wrapped into a cylinder inside the carbon nanotube and interior molecules in a chainlike configuration.