Human identification: an investigation of 3D models of paranasal sinuses to establish a biological profile on a modern UK population.

Medical imaging is a valuable source for facilitating empirical research and provides an accessible gateway for developing novel forensic anthropological methods for analysis including 3D modelling. This is especially critical for the United Kingdom (UK), where methods developed from modern UK populations do not currently exist. This study introduces a new approach to assist in human identification using 3D models of the paranasal sinuses. The models were produced from a database of 500 modern CT scans provided by University College London Hospital. Linear measurements and elliptic Fourier coefficients taken from 1500 three-dimensional models across six ethnic groups assessed by one-way ANOVA and discriminant function analysis showed a range of classification rates with certain rates reaching 75-85.7% (p < 0.05) in correctly classifying age and sex according to size and shape. The findings offer insights into the potential for employing paranasal sinuses as an attribute for establishing the identification of unknown human remains in future crime reconstructions.

A method to induce stress in human subjects in online research environments.

This paper presents a method to induce stress in human subjects during online participation in research studies without the presence of researchers. In this study, participants in the stress-inducing condition (N = 52, 44%) were asked to answer general knowledge and mathematical questions which people often get wrong, and did so under time pressure as well as receiving feedback. In contrast, participants in the control condition (N = 66, 56%) did not have time pressure or receive feedback. The stress manipulation was found to be effective, as the reported state anxiety and visual analog scale on stress scores were higher for the stress group than for the non-stress group (both findings, p < 0.001). Consistent findings were found when accounting for trait anxiety as a moderator, with the exception of the state anxiety levels in high trait anxiety group. This stressing method combines the established stress conditions of uncontrollability (such as time pressures) and social evaluative threats (such as negative feedback). In addition, the method contains specific measures (such as a commitment statement and attention check questions) to enhance the internal validity by preventing and detecting cheating or random responses. This method can be deployed through any commonly available online software. It offers a simple and cost-effective way to collect data online - which fits the increasing need to carry out research in virtual and online environments.

A multi-method assessment of 3D printed micromorphological osteological features.

The evaluation of 3D printed osteological materials has highlighted the difficulties associated with accurately representing fine surface details on printed bones. Moreover, there is an increasing need for reconstructions to be demonstrably accurate and reliable for use in the criminal justice system. The aim of this study was to assess the surface quality of 3D prints (n = 9) that presented with micromorphological alterations from trauma, taphonomy and pathology processes. The archaeological bones were imaged using micro-CT scanning and 3D printed with selective laser sintering (SLS) printing. A multi-method experimental approach subsequently identified: (1) the 3D printed bones to be metrically accurate to within 1.0 mm; (2) good representation of micromorphological surface features overall, albeit with some loss of intricate details, depths, and fine textures that can be important for visual processing; (3) five of the nine 3D printed bones were quantitatively scored as accurate using the visual comparison method; and, (4) low mesh comparison distances (± 0.2 mm) between the original models and the digitised 3D print models. The findings offer empirical data that can be used to underpin 3D printed reconstructions of exhibits for use in courts of law. In addition, an adaptable pathway was presented that can be used to assess 3D print accuracy in future reconstructions.

The suitability of visual taphonomic methods for digital photographs: An experimental approach with pig carcasses in a tropical climate.

In the context of increased scrutiny of the methods in forensic sciences, it is essential to ensure that the approaches used in forensic taphonomy to measure decomposition and estimate the postmortem interval are underpinned by robust evidence-based data. Digital photographs are an important source of documentation in forensic taphonomic investigations but the suitability of the current approaches for photographs, rather than real-time remains, is poorly studied which can undermine accurate forensic conclusions. The present study aimed to investigate the suitability of 2D colour digital photographs for evaluating decomposition of exposed human analogues (Sus scrofa domesticus) in a tropical savanna environment (Hawaii), using two published scoring methods; Megyesi et al., 2005 and Keough et al., 2017. It was found that there were significant differences between the real-time and photograph decomposition scores when the Megyesi et al. method was used. However, the Keough et al. method applied to photographs reflected real-time decomposition more closely and thus appears more suitable to evaluate pig decomposition from 2D photographs. The findings indicate that the type of scoring method used has a significant impact on the ability to accurately evaluate the decomposition of exposed pig carcasses from photographs. It was further identified that photographic taphonomic analysis can reach high inter-observer reproducibility. These novel findings are of significant importance for the forensic sciences as they highlight the potential for high quality photograph coverage to provide useful complementary information for the forensic taphonomic investigation. New recommendations to develop robust transparent approaches adapted to photographs in forensic taphonomy are suggested based on these findings.

A systematic analysis of misleading evidence in unsafe rulings in England and Wales.

Evidence has the potential to be misleading if its value when expressing beliefs in hypotheses is not fully understood or presented. Although the knowledge base to understand uncertainties is growing, a challenge remains to prioritise research and to continuously assess the magnitude and consequences of misleading evidence in criminal cases. This study used a systematic content analysis to identify misleading evidence, drawing information from case transcripts of rulings argued unsafe by the Court of Appeal of England and Wales. In the 7-year study period, 218 applications were successful on appeal, containing 235 cases of misleading evidence. The majority (76%) of successful appeals were based upon the same materials available in the original trial, rather than the presentation of new relevant information. Witness (39%), forensic (32%), and character evidence (19%) were the most commonly observed evidence types, with the validity of witnesses (26%), probative value of forensic evidence (12%), and relevance of character evidence (10%) being the most prevalent combinations of identified issues. Additionally, the majority (66%) of misleading evidence types relate to their interpretation at activity level. The findings suggest that many of these misleading aspects could have been prevented by providing more transparency in the relationship between evidence and hypotheses. Generally, the results contribute to gaining a more complete picture of the role of misleading evidence in the criminal justice system.

Extensive unusual lesions on a large number of immersed human victims found to be from cookiecutter sharks (Isistius spp.): an examination of the Yemenia plane crash.

Accurate determination of the origin and timing of trauma is key in medicolegal investigations when the cause and manner of death are unknown. However, distinction between criminal and accidental perimortem trauma and postmortem modifications can be challenging when facing unidentified trauma. Postmortem examination of the immersed victims of the Yemenia airplane crash (Comoros, 2009) demonstrated the challenges in diagnosing extensive unusual circular lesions found on the corpses. The objective of this study was to identify the origin and timing of occurrence (peri- or postmortem) of the lesions.A retrospective multidisciplinary study using autopsy reports (n = 113) and postmortem digital photos (n = 3 579) was conducted. Of the 113 victims recovered from the crash, 62 (54.9 %) presented unusual lesions (n = 560) with a median number of 7 (IQR 3 ∼ 13) and a maximum of 27 per corpse. The majority of lesions were elliptic (58 %) and had an area smaller than 10 cm2 (82.1 %). Some lesions (6.8 %) also showed clear tooth notches on their edges. These findings identified most of the lesions as consistent with postmortem bite marks from cookiecutter sharks (Isistius spp.). It suggests that cookiecutter sharks were important agents in the degradation of the corpses and thus introduced potential cognitive bias in the research of the cause and manner of death. A novel set of evidence-based identification criteria for cookiecutter bite marks on human bodies is developed to facilitate more accurate medicolegal diagnosis of cookiecutter bites.

Morphological Variations of Explosive Residue Particles and Implications for Understanding Detonation Mechanisms.

The possibility of recovering undetonated explosive residues following detonation events is well-known; however, the morphology and chemical identity of these condensed phase postblast particles remains undetermined. An understanding of the postblast explosive particle morphology would provide vital information during forensic examinations, allowing rapid initial indication of the explosive material to be microscopically determined prior to any chemical analyses and thereby saving time and resources at the crucial stage of an investigation. In this study, condensed phase particles collected from around the detonations of aluminized ammonium nitrate and RDX-based explosive charges were collected in a novel manner utilizing SEM stubs. By incorporating the use of a focused ion beam during analysis, for the first time it is possible to determine that such particles have characteristic shapes, sizes, and internal structures depending on the explosive and the distance from the detonation at which the particles are recovered. Spheroidal particles (10-210 µm) with microsurface features recovered following inorganic charge detonations were dissimilar to the irregularly shaped particles (5-100 µm) recovered following organic charge firings. Confirmatory analysis to conclude that the particles were indeed explosive included HPLC-MS, Raman spectroscopy, and mega-electron volt-secondary ionization mass spectrometry. These results may impact not only forensic investigations but also the theoretical constructs that govern detonation theory by indicating the potential mechanisms by which these particles survive and how they vary between the different explosive types.

Analysis of transferred fragrance and its forensic implications.

Perfumes are widely used by many people in developed countries, and a large number of both men and women wear perfumes on a daily basis. Analysis of perfume trace materials from clothing is not commonly employed within forensic casework, yet as a form of trace evidence it has the potential to provide valuable intelligence. In order to appreciate the value of trace evidence there is a fundamental need for an evidence base that can both offer insight into how a trace material behaves under different scenarios and activities, and from which inferences can be made. With this purpose a gas chromatography-mass spectrometry method for trace analysis of perfumes was developed. This paper presents two different series of experiments that investigate the dynamics of perfume transfer as a factor of perfume ageing time, and as a factor of perfume contact time. Empirical data showed that both perfume ageing time, and perfume contact time play a key role in the number of perfume components transferred. These studies have implication for forensic protocols, specifically for perfume trace evidence collection, analysis, interpretation, and presentation, and there is potentially great value in analysing perfumes from clothing exhibits in forensic enquiries that involve close contact between individuals, such as sexual assaults.

The retrieval of fingerprint friction ridge detail from elephant ivory using reduced-scale magnetic and non-magnetic powdering materials.

An evaluation of reduced-size particle powdering methods for the recovery of usable fingermark ridge detail from elephant ivory is presented herein for the first time as a practical and cost-effective tool in forensic analysis. Of two reduced-size powder material types tested, powders with particle sizes ≤ 40 µm offered better chances of recovering ridge detail from unpolished ivory in comparison to a conventional powder material. The quality of developed ridge detail of these powders was also assessed for comparison and automated search suitability. Powder materials and the enhanced ridge detail on ivory were analysed by scanning electron microscopy and energy dispersive X-ray spectroscopy and interactions between their constituents and the ivory discussed. The effect of ageing on the quality of ridge detail recovered showed that the best quality was obtained within 1 week. However, some ridge detail could still be developed up to 28 days after deposition. Cyanoacrylate and fluorescently-labelled cyanoacrylate fuming of ridge detail on ivory was explored and was less effective than reduced-scale powdering in general. This research contributes to the understanding and potential application of smaller scale powdering materials for the development of ridge detail on hard, semi-porous biological material typically seized in wildlife-related crimes.

Fingermark submission decision-making within a UK fingerprint laboratory: Do experts get the marks that they need?

Within UK policing it is routinely the responsibility of fingerprint laboratory practitioners to chemically develop areas of latent fingerprint ridge detail on evidential items and to determine which areas of ridge detail are of sufficient quality to be submitted to fingerprint experts for search or comparison against persons of interest. This study assessed the effectiveness of the fingermark submission process within the Evidence Recovery Unit Fingerprint Laboratory of the Metropolitan Police Service. Laboratory practitioners were presented with known source fingermark images previously deemed identifiable or insufficient by fingerprint experts, and were asked to state which of the marks they would forward to the Fingerprint Bureau. The results indicated that practitioners forwarded a higher percentage of insufficient fingermarks than is acceptable according to current laboratory guidelines, and discarded a number of marks that were of sufficient quality for analysis. Practitioners forwarded more insufficient fingermarks when considering fingermarks thought to be related to a murder and discarded more sufficient fingermarks when considering those thought to be related to a crime of 'theft from vehicle'. The results highlight the need for fingerprint laboratories to work alongside fingerprint experts to ensure that a consistent approach to decision-making is, as far as possible, achieved, and that appropriate thresholds are adopted so as to prevent the loss of valuable evidence and improve the efficiency of the fingerprint filtering process.

Cognitive bias in forensic anthropology: visual assessment of skeletal remains is susceptible to confirmation bias.

An experimental study was designed to examine cognitive biases within forensic anthropological non-metric methods in assessing sex, ancestry and age at death. To investigate examiner interpretation, forty-one non-novice participants were semi randomly divided into three groups. Prior to conducting the assessment of the skeletal remains, two of the groups were given different extraneous contextual information regarding the sex, ancestry and age at death of the individual. The third group acted as a control group with no extraneous contextual information. The experiment was designed to investigate if the interpretation and conclusions of the skeletal remains would differ amongst participants within the three groups, and to assess whether the examiners would confirm or disagree with the given extraneous context when establishing a biological profile. The results revealed a significant biasing effect within the three groups, demonstrating a strong confirmation bias in the assessment of sex, ancestry and age at death. In assessment of sex, 31% of the participants in the control group concluded that the skeleton remains were male. In contrast, in the group that received contextual information that the remains were male, 72% concluded that the remains were male, and in the participant group where the context was that the remains were of a female, 0% of the participants concluded that the remains were male. Comparable results showing bias were found in assessing ancestry and age at death. These data demonstrate that cognitive bias can impact forensic anthropological non-metric methods on skeletal remains and affects the interpretation and conclusions of the forensic scientists. This empirical study is a step in establishing an evidence base approach for dealing with cognitive issues in forensic anthropological assessments, so as to enhance this valuable forensic science discipline.

A global survey of the attitudes and perspectives of cognitive bias in forensic anthropology.

It is now well established that decision making can be susceptible to cognitive bias in a broad range of fields, with forensic science being no exception. Previously published research has revealed a bias blind spot in forensic science where examiners do not recognise bias within their own domain. A survey of 101 forensic anthropology practitioners (n = 52) and students (n = 38) was undertaken to assess their level of awareness of cognitive bias and investigate their attitudes towards cognitive bias within forensic anthropology. The results revealed that the forensic anthropology community (∼90%) had a high level of awareness of cognitive bias. Overall ∼89% expressed concerns about cognitive bias in the broad discipline of forensic science, their own domain of forensic anthropology, and in the evaluative judgments they made in reconstruction activities, identifying a significant reduction in the bias blind spot. However, more than half of the participants believed that bias can be reduced by sheer force of will, and there was a lack of consensus about implementing blinding procedures or context management. These findings highlight the need to investigate empirically the feasibility of proposed mitigating strategies within the workflow of forensic anthropologists and their capabilities for increasing the transparency in decision making.

Comparison of DNA recovery methods and locations from regularly-worn hooded jumpers before and after use by a second wearer.

Items of worn clothing are routinely examined for DNA in forensic casework, commonly with the expectation that at least some of the DNA will come from a wearer of the item, so-called 'wearer DNA'. This study investigated DNA recovered from hooded jumpers that were regularly worn and laundered for four weeks and then subsequently worn by a different individual for four hours. This study also systematically investigated whether using different recovery methods or sampling locations on the jumpers might distinguish between DNA deposited by the regular and most recent wearers of clothing. Four volunteers each wore a new hooded jumper regularly (6 h/day, 2 days/week, washed at weekends) during two 4-week periods. At the end of each month, DNA was first recovered by cutting out and mini-taping the inside left cuff, half-collar, pocket and underarm fabric. The jumpers were then worn by a different individual for four hours, and DNA was again recovered by cutting out and mini-taping, but this time from the inside right cuff, half-collar, pocket and underarm fabric. All DNA samples (n = 128) were quantified and profiled. DNA quantities ranged from 0 to âˆ¼40 ng with an outlier of âˆ¼150 ng, and no significant differences were observed among recovery methods and sampling locations, nor whether one or two wearers had worn the jumpers. However, one volunteer consistently deposited significantly more DNA to their jumpers than two other volunteers, confirming the impact of 'shedder status' on DNA deposition during wearing of clothing. When jumpers were regularly worn by one wearer, the majority (72.7-83.3 %) of the samples for all wearers across both months comprised a major profile of the wearer with a minor profile of non-wearer alleles. When jumpers were then worn by a second wearer, the composition of the profiles obtained were generally reproducible across the recovery methods used, the sampling locations and the two replicates of the experiment for each pairing of wearers. However, profile compositions differed between wearer pairings. Overall, ∼60 % of profiles obtained gave a major profile of the regular wearer, whereas âˆ¼30 % gave a major profile of the second wearer. The remaining profiles comprised other much less frequent observations of single-source profiles of each wearer and equal proportions of DNA from both wearers. Non-wearer DNA was also observed in the majority of samples, both before and after jumpers were worn by a second wearer. For one volunteer's jumpers, a recurring non-wearer DNA profile was observed that could be attributed to their romantic partner, and this DNA persisted on the jumpers even after being worn by the second wearer. This study provides insight on the impact of shedder status, multiple wearers, different recovery methods and sampling locations on the quantities of DNA and compositions of DNA profiles recovered from authentically regularly-worn hooded jumpers. The findings also provide a preliminary dataset that can be used to infer activity level probabilities in casework.

Unpacking workplace stress and forensic expert decision-making: From theory to practice.

Workplace stress can affect forensic experts' job satisfaction and performance, which holds financial and other implications for forensic service providers. Therefore, it is important to understand and manage workplace stress, but that is not simple or straightforward. This paper explores stress as a human factor that influences forensic expert decision-making. First, we identify and highlight three factors that mitigate decisions under stress conditions: nature of decision, individual differences, and context of decision. Second, we situate workplace stress in forensic science within the Challenge-Hindrance Stressor Framework. We argue that stressors in forensic science workplaces can have a positive or a negative impact, depending on the type, level, and context of stress. Developing an understanding of the stressors, their sources, and their possible impact can help forensic service providers and researchers to implement context-specific interventions to manage stress at work and optimize expert performance.

Drilling down into ethics: A thematic review of ethical considerations for the creation and use of 3D printed human remains in crime reconstruction.

The existing literature contains some exploration of the ethics concerning human remains in forensic and virtual anthropology. However, previous work has stopped short of interrogating the underlying ethical concepts. The question of how people understand and apply these concepts in practice, and what it means to act ethically, remain underexplored. This thematic review explores the ethical considerations that contribute to the creation and use of 3D printed human remains for forensic purposes. The three main branches of ethical theory are outlined to explore how they may apply to forensic practice. Key themes relating to 3D printing human remains in forensic contexts were explored to better understand the ethics landscape, ethical challenges, and the current guidelines in place. Through this thematic review, nine ethics principles were identified as key principles for guiding best practice: anonymity, autonomy, beneficence, consent, context, justice, non-maleficence, proportionality, and transparency. It is suggested that these principles could be incorporated into adaptable guidelines going forward to support ethical practice. The findings also suggest that holistic ethics cognition training may have value in supporting forensic scientists in ethical decision-making, together with procedural and structural design that may promote best practice and reduce cognitive load.

Sex estimation from virtual models: exploring the potential of stereolithic 3D crania models for morphoscopic trait scoring.

Modern computed tomography (CT) databases are becoming an accepted resource for the practice and development of identification methods in forensic anthropology. However, the utility of 3D models created using free and open-source visualization software such as 3D Slicer has not yet been thoroughly assessed for morphoscopic biological profiling methods where virtual methods of analysis are becoming more common. This paper presents a study that builds on the initial findings from Robles et al. (2020) to determine the feasibility of estimating sex on stereolithic (STL) 3D cranial models produced from CT scans from a modern, living UK population (n = 80) using equation 2 from the Walker's (2008) morphoscopic method. Kendall's coefficients of concordance (KCC) indicated substantial agreement using cranial features scores in an inter-observer test and a video-inter-observer test. Fleiss' Kappa scores showed moderate agreement (0.50) overall between inter-observer sex estimations, and for observer sex estimations in comparison to recorded sexes (0.56). It was found that novice users could virtually employ morphoscopic sex estimation methods effectively on STL 3D cranial models from modern individuals. This study also highlights the potential that digital databases of modern living populations can offer forensic anthropology. Key points: First example of Walker's (2008) method applied to a living UK population.Open-source software is a valuable resource for crime reconstruction approaches.Male scoring bias was observed in method application.Forensic anthropologists would benefit from virtual anthropology training to use and interpret 3D models.Digital databases offer more ethical, diverse, modern populations for future research.

Regaining creativity in science: insights from conversation.

The 'early modern' (Renaissance) workshop was predicated on the idea that informal, open-ended cooperation enables participants to experience difference and develop new insights, which can lead to new ways of thinking and doing. This paper presents the insights that emerged from a conversation event that brought wide-ranging voices together from different domains in science, and across the arts and industry, to consider science leadership as we look to the future in a time of interlocking crises. The core theme identified was a need to regain creativity in science; in the methods of scientific endeavours, in the way science is produced and communicated, and in how science is experienced in society. Three key challenges for re-establishing a culture of creativity in science emerged: (i) how scientists communicate what science is and what it is for, (ii) what scientists value, and (iii) how scientists create and co-create science with and for society. Furthermore, the value of open-ended and ongoing conversation between different perspectives as a means of achieving this culture was identified and demonstrated.

Investigating the uses of mobile phone evidence in China criminal proceedings.

Data from mobile phones are regularly used in the investigation of crime and court proceedings. Previously published research has primarily addressed technical issues or provided operational manuals for using forensic science evidence, rather than analysing human factors and the implementation of forensic tools in investigation settings. Moreover, previous research has focused almost entirely on western countries, and there is a dearth of research into the uses of forensic evidence in China. In this study, a review was carried out of court sentencing documents referring to mobile phone evidence in China over the period 2013-2018. Automated content analysis was used to identify the specific evidence types utilised and the sentencing outcome for each case. Results show that mobile phone evidence was used in 3.3% of criminal proceedings. Among various data types mentioned in criminal proceedings, call records sustained as the most frequently used type of data. After which, instant messaging tools (e.g. WeChat) are an increasing proportion of all mobile phone evidence, from 1% in 2015 to 25% in 2018. For cases that utilised mobile phone data, the analysis of instant messaging and online transaction tools is routine, with little variation in the use of each application (WeChat, Alipay, QQ) for investigations of different types of crime. However, in the majority of criminal cases, mobile phone data function as subsidiary evidence and posed limited impacts on verdict reached. The current findings indicate that a large amount of mobile phone evidence was transformed into other evidence formats or filtered out directly before court proceedings.

3D forensic science: A new field integrating 3D imaging and 3D printing in crime reconstruction.

3D techniques are increasingly being used by forensic scientists in crime reconstruction. The proliferation of 3D techniques, such as 3D imaging and printing being employed across the various stages of the forensic science process, means that the use of 3D should be considered as a distinct field within forensic science. '3D Forensic Science' ('3DFS') is therefore presented in this paper as a field that brings together a range of 3D techniques and approaches that have been developed within different areas of forensic science for achieving crime reconstructions and interpreting and presenting evidence. It is argued that by establishing this distinct field, defining its boundaries, and developing expertise, best practice and standards, the contribution of 3DFS to the criminal justice system can be maximised and the accuracy and robustness of crime reconstruction endeavours can be enhanced.

A cultural change to enable improved decision-making in forensic science: A six phased approach.

There has been an increased engagement by researchers in understanding the decision-making processes that occur within forensic science. There is a rapidly growing evidence base underpinning our understanding of decision-making and human factors and this body of work is the foundation for achieving truly improved decision-making in forensic science. Such an endeavour is necessary to minimise the misinterpretation of scientific evidence and maximize the effectiveness of crime reconstruction approaches and their application within the criminal justice system. This paper proposes and outlines a novel six phased approach for how a broadening and deepening knowledge of decision-making in forensic science can be articulated and incorporated into the spheres of research, practice, education, and policy making within forensic science specifically, and the criminal justice system more generally. Phases 1 and 2 set out the importance of systematic examination of the decisions which play a role throughout forensic reconstruction and legal processes. Phase 3 focuses on how these decisions can, and should, be studied to understand the underlying mechanisms and contribute to reducing the occurrence of misleading decisions. Phase 4 highlights the ways in which the results and implications of this research should be communicated to the forensic community and wider criminal justice system. Lastly, the way in which the forensic science domain can move forwards in managing the challenges of human decision-making and create and embed a culture of acceptance and transparency in research, practice and education (learning and training) are presented in phases 5 and 6. A consideration of all 6 connected phases offers a pathway for a holistic approach to improving the transparency and reproducibility of decision making within forensic science.