Characterization of Tetracycline Hydrochloride Compounded in a Miracle Mouthwash Formulation.

Miracle mouthwash (MMW) is a commonly prescribed oral formulation compounded with varying active ingredients, depending on purpose of treatment. Due to patient-to-patient customization, the solubility, stability, and solid-state characteristics of the active ingredients may not be known after compounding. This study found that the common antibiotic, tetracycline hydrochloride (HCl), compounded in MMW formulations that contained dexamethasone elixir and diphenhydramine, underwent significant physical-chemical changes. Simulated patient conditions demonstrated appreciable fluctuations from the target content of 50 mg tetracycline HCl per teaspoon over 15 days. The lowest tetracycline content sampled was 32.5 mg, while the highest content sampled was 53.0 mg. Although tetracycline HCl went into solution after compounding, tetracycline did not remain in solution. In fact, the amount of tetracycline in solution declined exponentially, with over two-thirds of tetracycline precipitating out within the first day of compounding and 14% remaining in solution after 15 days. Crystals that formed within the MMW formulation were analyzed using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and powder X-ray diffraction (PXRD), which confirmed a solvent-mediated phase transformation of tetracycline HCl to tetracycline hexahydrate. For tetracycline in solution, pH had a significant effect on chemical degradation. Therefore, tetracycline HCl compounded in MMW formulations can have significant physical-chemical stability changes, possibly impacting patient dosing.

Preformulation and Evaluation of Tofacitinib as a Therapeutic Treatment for Asthma.

Preformulation studies on tofacitinib citrate, a small molecule JAK3 specific inhibitor, have not been previously reported in literature. We therefore conducted several preformulation studies on tofacitinib citrate, and its free base, to better understand factors that affect its solubility, stability, and solid-state characteristics. Further, the results of the preformulation studies helped facilitate the development of a nebulized formulation of tofacitinib citrate for inhalational delivery to house dust mite allergen-challenged, BALB/c mice as a potential treatment for eosinophilic asthma. The preformulation results indicated tofacitinib having a basic pKa of 5.2, with its stability dependent on pH, ionic strength, and temperature. Degradation of tofacitinib follows apparent first-order kinetics. In order to maximize stability of the drug, ionic strength and temperature should be minimized, with an optimal range pH between 2.0 and 5.0. Additionally, our findings demonstrate that tofacitinib citrate can successfully be nebulized at a suitable droplet size for inhalation (1.2 ± 0.2 µm MMAD) through a nose-only chamber. Animals dosed with tofacitinib citrate demonstrated marked reductions in BAL eosinophils and total protein concentrations following HDM challenge. These data suggest that tofacitinib citrate represents the potential to be an effective therapy for eosinophilic asthma.

The effect of a holding chamber on albuterol metered-dose inhaler product differences.

BACKGROUND: Three albuterol sulfate metered-dose inhaled (MDI) products (Ventolin HFA, Proventil HFA, and ProAir HFA) are marketed in the United States to provide the same total dose of albuterol sulfate. However, it is widely known that the fine particle dose (<5 µm) is the portion of the particle distribution that actually reaches the lungs and provides therapeutic benefit. OBJECTIVE: To examine the differences in particle size between products and how a valved holding chamber (VHC) can mitigate possible adverse effects. METHODS: Particle size distributions in each product were measured, with and without a VHC, and were analyzed by high-performance liquid chromatography. RESULTS: The only significant mean (SD) difference in total dose was between Proventil (75 [21] µg) and ProAir (107 [12] µg) (P < .01). The fine particle doses of all 3 products were significantly different: 21 (5) µg of albuterol sulfate for Ventolin, 40 (4) µg of albuterol sulfate for Proventil, and 64 (7) µg of albuterol sulfate for ProAir (P < .001 for all 3 cases). The VHC successfully removed the larger particle dose delivered by all 3 products (P ≤ .01) without reducing the fine particle dose (P > .05). CONCLUSION: Ventolin, Proventil, and ProAir should not be considered interchangeable products. In this study, the dose of albuterol sulfate likely to reach the lungs with Proventil or ProAir is 2 to 3 times that of Ventolin. As such, patients with asthma may require 3 additional puffs of Ventolin to achieve a clinical benefit similar to Proventil or ProAir. Because all 3 products contain 200 actuations, it also follows that Proventil or ProAir products may last a user 2 to 3 times longer than Ventolin.

Modeling and Understanding Combination pMDI Formulations with Both Dissolved and Suspended Drugs.

A simulation model has been established to predict the residual aerodynamic particle size distribution (APSD) of dual-component pressurized metered dose inhalers (pMDIs). More specifically, this model estimates the APSD of pMDI formulations containing dissolved and suspended compounds for various formulations, and has been verified experimentally. Simulated and experimental data illustrate that APSDs of the dissolved and suspended components of the pMDI are influenced by concentrations of the dissolved and micronized suspended drugs, along with suspended drug size. Atomized droplets from such combination formulations may contain varying number of suspended drug particles and a representative concentration of dissolved drug. These sub-populations of atomized droplets may explain the residual APSDs. The suspended drug follows a monomodal, lognormal distribution and is more greatly impacted by the size and concentration of the suspended drug in comparison to the concentration of dissolved drug. On the other hand, dissolved drug illustrates a bimodal, lognormal residual particle size distribution both theoretically and experimentally. The smaller mode consists of residual particles made of dissolved drug only, while the larger mode consists of residual particles that contain both dissolved and suspended drugs. The model effectively predicted the size distributions of both the dissolved and suspended components of combination formulations (r(2) value of 0.914 for the comparison of simulated versus experimental MMAD values for the formulations examined). The results demonstrate that this model is a useful tool that may be able to expedite the development of combination pMDI formulation.

Solid-State and Solution Characterization of Myricetin.

Myricetin (MYR) is a natural compound that has been investigated as a chemopreventative agent. MYR has been shown to suppresses ultraviolet B (UVB)-induced cyclooxygenase-2 (COX-2) protein expression and reduce the incidence of UVB-induced skin tumors in mice. Despite MYR's promise as a therapeutic agent, minimal information is available to guide the progression of formulations designed for future drug development. Here, data is presented describing the solid-state and solution characterization of MYR. Investigation into the solid-state properties of MYR identified four different crystal forms, two hydrates (MYR I and MYR II) and two metastable forms (MYR IA and MYR IIA). From solubility studies, it was evident that all forms are very insoluble (<5 µg/ml) in pure water. MYR I was found to be the most stable form at 23, 35, and 56°C. Stability determination indicated that MYR undergoes rapid apparent first-order degradation under basic pH conditions, and that degradation was influenced by buffer species. Apparent first-order degradation was also seen when MYR was introduced to an oxidizing solution. Improved stability was achieved after introducing 0.1% antioxidants to the solution. MYR was found to have good stability following exposure to ultraviolet radiation (UVR), which is a consideration for topical applications. Finally, a partitioning study indicated that MYR possess a log P of 2.94 which, along with its solid-state properties, contributes to its poor aqueous solubility. Both the solid-state properties and solution stability of MYR are important to consider when developing future formulations.

Factors influencing aerodynamic particle size distribution of suspension pressurized metered dose inhalers.

Pressurized metered dose inhalers (pMDIs) are frequently used for the treatment of asthma and chronic obstructive pulmonary disease. The aerodynamic particle size distribution (APSD) of the residual particles delivered from a pMDI plays a key role in determining the amount and region of drug deposition in the lung and thereby the efficacy of the inhaler. In this study, a simulation model that predicts the APSD of residual particles from suspension pMDIs was utilized to identify the primary determinants for APSD. These findings were then applied to better understand the effect of changing drug concentration and micronized drug size on experimentally observed APSDs determined through Andersen Cascade Impactor testing. The experimental formulations evaluated had micronized drug mass median aerodynamic diameters (MMAD) between 1.2 and 2.6 µm and drug concentrations ranging from 0.01 to 1% (w/w) with 8.5% (w/w) ethanol in 1,1,1,2-tetrafluoroethane (HFA-134a). It was determined that the drug concentration, micronized drug size, and initially atomized droplet distribution have a significant impact in modulating the proportion of atomized droplets that contain multiple suspended drug particles, which in turn increases the residual APSD. These factors were found to be predictive of the residual particle MMAD for experimental suspension HFA-134a formulations containing ethanol. The empirical algebraic model allows predicting the residual particle size for a variety of suspension formulations with an average error of 0.096 µm (standard deviation of 0.1 µm).

In vitro evaluation of nonconventional accessory devices for pressurized metered-dose inhalers.

BACKGROUND: The selection of accessory devices for pressurized metered-dose inhalers (pMDIs) by health care professionals is typically cost driven without consideration of how the device modifies clinical outcomes. OBJECTIVE: To evaluate nonconventional accessory devices and the open-mouth technique with and without ideal coordination of actuation and inhalation to identify and understand the considerations for recommending potential inexpensive devices. METHODS: In vitro performance parameters of the beclomethasone dipropionate pMDI were evaluated with several devices (AeroChamber, toilet paper roll, paper towel roll, rolled paper, plastic bottle spacer, bottle-holding chamber, and nebulizer reservoir tubing). RESULTS: Compared with the pMDI alone, all the accessory devices evaluated have significantly lower drug exposure and throat deposition and higher respirable fractions, with the paper towel roll having the greatest effect of the devices evaluated (exposure decreased from a mean [SD] of 76.1 [4.8] µg to 49.2 [2.0] µg, throat deposition decreased from 32.0 [3.2] µg to 0.8 [0.3] µg, and respirable fraction increased from 49.8% [3.2%] to 96.4% [0.4%]). Introduction of a delay between actuation and inhalation resulted in greater variability in performance metrics for the devices evaluated, and the bottle-holding chamber and paper towel roll were most effective in mitigating the effect of the delay. The open-mouth technique was found to decrease throat deposition and respirable mass compared with the pMDI alone. CONCLUSION: In addition to cost, the amount of drug that deposits in the throat and the lungs and the effect of asynchronous actuation and inhalation can vary with the selection of an accessory device, which may affect the therapeutic benefits of the pMDI selected.

Stability of sulforaphane for topical formulation.

CONTEXT: Sulforaphane (SFN) is a natural compound that has been investigated as a chemopreventive agent. SFN has been shown to inhibit the activator-protein-1 (AP-1) transcription factor and may be effective for inhibition of ultraviolet (UV) induced skin carcinogenesis. This study was designed to investigate the stability of SFN as a function of pH, temperature and in various solvents and formulations. MATERIALS AND METHODS: Stability was analyzed using high-performance liquid chromatography. A potential lead formulation was identified and evaluated in vivo. RESULTS: SFN was determined to undergo apparent first-order degradation kinetics for the conditions explored. It was observed that SFN undergoes base catalyzed degradation. Buffer species and solvent type impacts stability as well. SFN was found to be very sensitive to temperature with degradation rate changing by a factor of nearly 3.1 for every 10 °C change in temperature (at pH 4.0). SFN completely degraded after 30 days in a conventional pharmaceutical cream formulation. Improved stability was observed in organic formulation components. Stability studies were conducted on two nonaqueous topical formulations: a polyethylene glycol (PEG) ointment base and an organic oleaginous base. CONCLUSION: Topically applied SFN in the PEG base formulation significantly reduced AP-1 activation after UV stimulation in the skin of a transgenic mouse model, indicating that SFN in this formulation retains efficacy in vivo.

Advances in metered dose inhaler technology: formulation development.

Pressurized metered dose inhalers (MDIs) are a long-standing method to treat diseases of the lung, such as asthma and chronic obstructive pulmonary disease. MDIs rely on the driving force of the propellant, which comprises the bulk of the MDI formulation, to atomize droplets containing drug and excipients, which ideally should deposit in the lungs. During the phase out of chlorofluorocarbon propellants and the introduction of more environmentally friendly hydrofluoroalkane propellants, many improvements were made to the methods of formulating for MDI drug delivery along with a greater understanding of formulation variables on product performance. This review presents a survey of challenges associated with formulating MDIs as solution or suspension products with one or more drugs, while considering the physicochemical properties of various excipients and how the addition of these excipients may impact overall product performance of the MDI. Propellants, volatile and nonvolatile cosolvents, surfactants, polymers, suspension stabilizers, and bulking agents are among the variety of excipients discussed in this review article. Furthermore, other formulation approaches, such as engineered excipient and drug-excipient particles, to deliver multiple drugs from a single MDI are also evaluated.

Advances in metered dose inhaler technology: hardware development.

Pressurized metered dose inhalers (MDIs) were first introduced in the 1950s and they are currently widely prescribed as portable systems to treat pulmonary conditions. MDIs consist of a formulation containing dissolved or suspended drug and hardware needed to contain the formulation and enable efficient and consistent dose delivery to the patient. The device hardware includes a canister that is appropriately sized to contain sufficient formulation for the required number of doses, a metering valve capable of delivering a consistent amount of drug with each dose delivered, an actuator mouthpiece that atomizes the formulation and serves as a conduit to deliver the aerosol to the patient, and often an indicating mechanism that provides information to the patient on the number of doses remaining. This review focuses on the current state-of-the-art of MDI hardware and includes discussion of enhancements made to the device's core subsystems. In addition, technologies that aid the correct use of MDIs will be discussed. These include spacers, valved holding chambers, and breath-actuated devices. Many of the improvements discussed in this article increase the ability of MDI systems to meet regulatory specifications. Innovations that enhance the functionality of MDIs continue to be balanced by the fact that a key advantage of MDI systems is their low cost per dose. The expansion of the health care market in developing countries and the increased focus on health care costs in many developed countries will ensure that MDIs remain a cost-effective crucial delivery system for treating pulmonary conditions for many years to come.

Comparative evaluation of pharmaceutical products obtained in Mexico: augmenting existing scientific data.

CONTEXT: The accessibility of pharmacies in neighboring countries has facilitated the trend of acquiring medications outside of local borders. However, scientific data assessing the drug content and quality of these medications has not increased in a corresponding fashion. OBJECTIVE: This study seeks to augment existing scientific data. MATERIALS AND METHODS: Seventeen products that were obtained from pharmacies in Mexico were evaluated for active ingredient content. The active pharmaceutical ingredients (API) assessed included amoxicillin, ampicillin, ciprofloxacin, levothyroxine, sildenafil citrate, sulfamethoxazole, trimethoprim, and warfarin. API content was analysed with high performance liquid chromatography assays and the resultant data interpreted by applying United States Pharmacopeia (USP) acceptability limits. RESULTS: All of the samples analyzed for the two ciprofloxacin products and the two ampicillin products were found to be within the USP limits. Of the four different sulfamethoxazole/trimethoprim products tested, all were within USP limits for sulfamethoxazole, but contained 2-3 individual units which were outside of USP limits for trimethoprim. Several of the remaining products (amoxicillin, levothyroxine, sildenafil citrate, and warfarin) had individual units that fell outside of the USP limits, although only one of the levothyroxine products (1 out of 20 tablets tested) and both sildenafil citrate products (all of the units tested) contained units outside of ±25% label claim.

Inhalation of an ethanol-based zileuton formulation provides a reduction of pulmonary adenomas in the A/J mouse model.

Potential efficacy of zileuton, a 5-LOX inhibitor, was evaluated for the reduction of pulmonary adenomas in the A/J murine model when administered via nose-only inhalation. Development of pulmonary adenomas was induced with benzo(a)pyrene. Animals were treated with a zileuton solution (5 mg/mL in 85:15 ethanol/water) either twice weekly or five times a week via nose-only inhalation; The placebo solution (85:15 EtOH/H2O, no active) was also evaluated. Dose delivered was calculated to be 1.2 mg/kg per exposure for each zileuton group. After 20 weeks of treatment, surface tumors were enumerated and histologically assessed. A significant reduction in tumor count was noted for both the twice weekly administration (40%) and the five times a week administration (59%). The data also showed a significant reduction for the group, which received the placebo (approximately 58%). The treatment groups were also found to have an impact on the histological stages of adenoma development.

Stability of 5-fluoro-2'-deoxycytidine and tetrahydrouridine in combination.

In vivo, the DNA methyltransferase inhibitor, 5-fluoro-2'-deoxycytidine (FdCyd, NSC-48006), is rapidly converted to its unwanted metabolites. Tetrahydrouridine (THU, NSC-112907), a cytidine deaminase inhibitor can block the first metabolic step in FdCyd catabolism. Clinical studies have shown that co-administration with THU can inhibit the metabolism of FdCyd. The National Cancer Institute is particularly interested in a 1:5 FdCyd/THU formulation. The purpose of this study was to investigate the in vitro pH stability of FdCyd and THU individually and in combination. A stability-indicating high-performance liquid chromatography method for the quantification of both compounds and their degradants was developed using a ZIC(R)-HILIC column. The effect of THU and FdCyd on the in vitro degradation of each other was studied as a function of pH from 1.0 to 7.4 in aqueous solutions at 37 degrees C. The degradation of FdCyd appears to be first-order and acid-catalyzed. THU equilibrates with at least one of its degradants. The combination of FdCyd and THU in solution does not affect the stability of either compound. The stability and compatibility of FdCyd and THU in the solid state at increased relative humidity and at various temperatures are also evaluated.

Analysis of drug content and weight uniformity for half-tablets of 6 commonly split medications.

BACKGROUND: Cost savings can be achieved with the practice of tablet splitting. Previous research has shown weight nonuniformity within tablet halves. However, limited research to date has found that the potential dose inaccuracy resulting from splitting tablets does not significantly affect clinical outcomes. OBJECTIVE: To determine the drug content and weight in split half-tablets of 6 commonly split medications using drug assay analysis. METHODS: This study was performed by 2 fourth-year pharmacy students using 30 randomly selected tablets of each of the following 6 medications: warfarin sodium 5 milligrams (mg), simvastatin 80 mg, metoprolol succinate 200 mg, metoprolol tartrate 25 mg, citalopram 40 mg, and lisinopril 40 mg. A randomly selected half of the tablets were split by a single pharmacy student using a tablet cutter, and the remaining tablets were kept whole. Drug content was analyzed for 15 whole tablets and 30 half-tablets for each of the 6 drugs using high performance liquid chromatography, an analytical tool used to identify and quantify substances in solution. Drug content uniformity was assessed by comparing drug content within half-tablets with one-half of the drug content mean found for all whole tablets in the sample. Weight uniformity was assessed by comparing half-tablet weights, as determined by a Mettler analytical balance, with one-half of the mean weight for whole tablets in the sample. The percentages by which each whole tablet's or half-tablet's drug content and weight differed from sample mean values were compared with proxy United States Pharmacopeia (USP) specification ranges for drug content (95%-105% for warfarin sodium and 90%-110% for the other 5 drugs). Additionally, these outcomes were compared for nonscored versus scored tablets. The percent relative standard deviation (%RSD, ratio of the standard deviation to the mean), a commonly used measure of the repeatability and precision of assays used to analyze drug content, was also calculated in order to determine whether the drugs met proxy USP specification for %RSD (less than 6% for all drugs studied). RESULTS: A total of 43 of 180 half-tablets (23.9%) differed from sample mean values by a percentage that fell outside of proxy USP specification for drug content; warfarin sodium (11 of 30 half-tablets, 36.7%), simvastatin (3 of 30 half-tablets, 10.0%) metoprolol succinate (10 of 30 half-tablets, 33.3%), metoprolol tartrate (4 of 30 half-tablets, 13.3%), citalopram (5 of 30 half-tablets, 16.7%), and lisinopril (10 of 30 half-tablets, 33.3%). Half-tablets outside of proxy USP specification for weight included warfarin sodium (10 of 30 half-tablets, 33.3%), metoprolol succinate (6 of 30 half-tablets, 20%), and lisinopril (7 of 30 half-tablets, 23.3%). The %RSDs for drug content and weight fell outside of the proxy USP specification for %RSD for metoprolol succinate (drug content = 8.98%, weight = 7.70%) and lisinopril (drug content = 10.41%, weight = 8.13%). Mean percent weight loss after splitting was less than 1% for all drugs except lisinopril, which had an average weight loss of 1.25%. The total numbers of scored (nonscored) tablet halves that fell outside of proxy USP specification were 20 (23) for drug content and 10 (13) for weight. When measuring drug content, the numbers of out-of-range half-tablets for scored (nonscored) drugs were 36 (44) at 95%-105%, 9 (23) at 90%-110%, 0 (10) at 85%-115%, and 0 (1) at 75%-125%. When measuring weight, the numbers of out-of-range half-tablets for scored (nonscored) drugs were 28 (38) at 95%-105%, 0 (14) at 90%-110%, 0 (3) at 85%-115%, and 0 (0) at 75%-125%. CONCLUSION: Dose variation exceeded a proxy USP specification for more than one-third of sampled half-tablets of warfarin sodium, metoprolol succinate, and lisinopril and appeared to be greater for nonscored tablets as compared with scored tablets. Drug content variation in half-tablets appeared to be attributable primarily to weight variation occurring when tablets powder or fragment during the splitting process. Therefore, equal daily doses will be determined by the ability of patients to split tablets perfectly in half.

Solubility of solid solutes in HFA-134a with a correlation to physico-chemical properties.

The reformulation of pressurized metered dose inhalers with HFAs from CFCs has given rise to many solubility challenges. Compounds and excipients previously used in CFCs were observed to have significantly different solubility values in HFA-134a. In this investigation, the solubility values of 36 solid organic solutes in HFA-134a were determined. The set of compounds display diverse physico-chemical properties and yielded solubility values that ranged over 4 orders of magnitude. The experimental solubilities were compared to calculated values obtained from ideal solubility theory as well as from regular solution theory. While the theoretical models did not offer absolute solubility estimations, a clear correlation with the ideal solubility (melting point) was noted. Further consideration utilizing multiple linear regression models afforded correlations based on molecular properties. Regression models, containing melting point and log P (or molar volume) resulted in promising correlations having average absolute errors of 0.43 log units, or a factor of 2.69.

Pharmacological TLR4 Antagonism Using Topical Resatorvid Blocks Solar UV-Induced Skin Tumorigenesis in SKH-1 Mice.

An urgent need exists for the development of more efficacious molecular strategies targeting nonmelanoma skin cancer (NMSC), the most common malignancy worldwide. Inflammatory signaling downstream of Toll-like receptor 4 (TLR4) has been implicated in several forms of tumorigenesis, yet its role in solar UV-induced skin carcinogenesis remains undefined. We have previously shown in keratinocyte cell culture and SKH-1 mouse epidermis that topical application of the specific TLR4 antagonist resatorvid (TAK-242) blocks acute UV-induced AP-1 and NF-κB signaling, associated with downregulation of inflammatory mediators and MAP kinase phosphorylation. We therefore explored TLR4 as a novel target for chemoprevention of UV-induced NMSC. We selected the clinical TLR4 antagonist resatorvid based upon target specificity, potency, and physicochemical properties. Here, we confirm using ex vivo permeability assays that topical resatorvid can be effectively delivered to skin, and using in vivo studies that topical resatorvid can block UV-induced AP-1 activation in mouse epidermis. We also report that in a UV-induced skin tumorigenesis model, topical resatorvid displays potent photochemopreventive activity, significantly suppressing tumor area and multiplicity. Tumors harvested from resatorvid-treated mice display reduced activity of UV-associated signaling pathways and a corresponding increase in apoptosis compared with tumors from control animals. Further mechanistic insight on resatorvid-based photochemoprevention was obtained from unsupervised hierarchical clustering analysis of protein readouts via reverse-phase protein microarray revealing a significant attenuation of key UV-induced proteomic changes by resatorvid in chronically treated high-risk SKH-1 skin prior to tumorigenesis. Taken together, our data identify TLR4 as a novel molecular target for topical photochemoprevention of NMSC. Cancer Prev Res; 11(5); 265-78. ©2018 AACRSee related editorial by Sfanos, p. 251.

New analytical techniques to facilitate preformulation screening in propellant systems.

The objective of these studies was to investigate the applicability of an online direct inject HPLC method for the preformulation screening of pharmaceutical agents in pressurized metered dose inhalers (MDIs). The technique was initially utilized for the solubility determination of solid solutes. This study explores the extension of the online direct inject method for the evaluation of drug stability in propellant systems as well as for the analysis of MDI vials crimped with metered valves. Through-life content analysis confirmed that a single vial may be repeatedly sampled, thus facilitating the stability evaluation of a single unit over time. The method was successfully used for evaluating the stability of a model drug, as a function of several different formulation configurations, with minimal sample numbers. Additionally, studies determined that after modifications were made to the injection coupler, the technique was also feasible for use with 50 and 100 microL metered valves, however further modifications are necessary for 25 microL valves.

Impact of droplet evaporation rate on resulting in vitro performance parameters of pressurized metered dose inhalers.

Pressurized metered dose inhalers (pMDIs) are widely used for the treatment of pulmonary diseases. The overall efficiency of pMDI drug delivery may be defined by in vitro parameters such as the amount of drug that deposits on the model throat and the proportion of the emitted dose that has particles that are sufficiently small to deposit in the lung (i.e., fine particle fraction, FPF). The study presented examines product performance of ten solution pMDI formulations containing a variety of cosolvents with diverse chemical characteristics by cascade impaction with three inlets (USP induction port, Alberta Idealized Throat, and a large volume chamber). Through the data generated in support of this study, it was demonstrated that throat deposition, cascade impactor deposition, FPF, and mass median aerodynamic diameter of solution pMDIs depend on the concentration and vapor pressure of the cosolvent, and the selection of model throat. Theoretical droplet lifetimes were calculated for each formulation using a discrete two-stage evaporation process model and it was determined that the droplet lifetime is highly correlated to throat deposition and FPF indicating that evaporation kinetics significantly influences pMDI drug delivery.

Chiral separation of lipoxygenase metabolites utilizing high-performance liquid chromatography.

An isocratic, reversed-phase HPLC assay has been developed for the separation of the enantiomers of four lipoxygenase metabolites, without the need for a derivatization step. Separation of the enantiomers was studied on a polysaccharide type chiral stationary phase column. Upon determination of suitable mobile phase composition, the assay was evaluated at various temperatures. In all cases the R enantiomer eluted before the S enantiomer. The best separations were observed at 0 degrees C.

Development of an HPLC method for the analysis of Apomine in a topical cream formulation.

A stability indicating, reversed-phase high performance liquid chromatographic method was developed for the quantification of Apomine, tetraisopropyl 2-(3,5-di-tert-butyl-4-hydroxyphenyl)-ethyl-1, 1-bisphosphonate, in a topical cream formulation. Analysis of Apomine in the cream formulation was performed through a dilution of the cream base with tetrahydrofuran. This allowed the current method to bypass extraction and/or centrifugation for direct injection and analysis. Separation was achieved using an Alltima C18 5 microm, 150 mm x 2.1 mm column and employed a gradient procedure, beginning with acetonitrile-water (65:35, v/v), at 0.6 mL/min for 9 min, followed by a rinse with isopropyl alcohol for 9 min. The complete gradient method has been optimized to separate Apomine from the nonpolar cream components, wash and equilibrate the column in a 30-min assay. This report demonstrates that this method is effective for quantification of Apomine in a cream formulation.