On-chip silicon photonics based grating assisted vibration sensor.

We present a compact, highly sensitive and scalable on-chip photonic vibration measurement scheme for vibration sensing. The scheme uses a silicon photonic diffraction-grating based sensor integrated underneath a silicon cantilever. We demonstrate a static and dynamic measurement sensitivity (ΔT/Δgap) of 0.6 % change in intensity per nm displacement. The electrostatically driven dynamic response measurement of the grating based sensor shows an excellent agreement with commercial Laser Doppler Vibrometer (LDV) measurement. We demonstrate the thermo-mechanical noise measurement on the cantilever in ambience, which is verified using LDV. A minimum displacement of 1.9 pm is measured with a displacement sensitivity of 10 µW/nm for a measurement bandwidth of 16 Hz. The demonstrated sensitivity is 2 orders of magnitude better than that obtained from measurements of static displacement. We also present a detailed 2D-FDTD simulation and optimization of the grating-based sensor to achieve maximum displacement sensitivity.

Effect of single nanoparticle-nanopore interaction strength on ionic current modulation.

Solid-state nanopores are rapidly emerging as promising platforms for developing various single molecule sensing applications. The modulation of ionic current through the pore due to translocation of the target molecule has been the dominant measurement modality in nanopore sensors. Here, we focus on the dwell time, which is the duration taken by the target molecule or particle to traverse the pore and study its dependence on the strength of interaction of the target with the pore using single gold nanoparticles (NPs) as targets interacting with a silicon nitride (SiN) nanopore. The strength of interaction, which in our case is electrostatic in nature, can be controlled by coating the nanoparticles with charged polymers. We report on an operating regime of this nanopore sensor, characterized by attractive interactions between the nanoparticle and the pore, where the dwell time is exponentially sensitive to the target-pore interaction. We used negatively and positively charged gold nanoparticles to control the strength of their interaction with the Silicon Nitride pore which is negatively charged. Our experiments revealed how this modulation of the electrostatic force greatly affects the dwell time. Positively charged NPs with strong attractive interactions with the pore resulted in increase of dwell times by 2-3 orders of magnitude, from 0.4 ms to 75.3 ms. This extreme sensitivity of the dwell time on the strength of interaction between a target and nanopore can be exploited in emerging nanopore sensor applications.

?Trophic switch' by catfish community from predation to scavenging modulated by human food discard in an estuarine bay.

Benthic predatory catfishes are voracious and opportunistic predators and can easily shift their diet according to the availability of prey. In this study, feeding ecology of catfishes from two adjacent habitats of an estuarine bay is compared. The lower bay was relatively pristine as compared to the upper bay and was represented by two families of catfishes-Plotosidae and Ariidae, while the upper bay represented only ariid catfishes. Gut content analysis revealed that catfish predators from lower bay consumed conventional prey like teleosts and benthic invertebrates with a linear pattern of ontogenetic dietary shift. Plicofollis dussumieri and Plotosus canius occupied the position of top predators in the lower bay and were specialized feeders. Other predators like Plotosus lineatus, Arius arius, Arius jella, and Arius maculatus were generalist feeders occupying the position of mesopredators. However, in the upper bay, the catfish predators represented by Arius maculatus, Arius jella, and Arius arius predominantly fed on human discarded food. The easily available human food in the form of chicken, corn, and rice as noted from the investigated guts shows altered trophic guilds of ariid catfishes wherein only mid to large-sized catfish community was noted in this bay. A distinct "trophic switch" altered the trophic function from predation to scavenging which was observed in their feeding behavior. The anthropogenic impact in the form of unmanaged organic waste alters the role of predatory catfishes thereby restructuring the food web that may lead to unknown changes in the estuarine benthic ecosystems resulting in reduced ecosystem services.

Nanomechanical Resonators: Toward Atomic Scale.

The quest for realizing and manipulating ever smaller man-made movable structures and dynamical machines has spurred tremendous endeavors, led to important discoveries, and inspired researchers to venture to previously unexplored grounds. Scientific feats and technological milestones of miniaturization of mechanical structures have been widely accomplished by advances in machining and sculpturing ever shrinking features out of bulk materials such as silicon. With the flourishing multidisciplinary field of low-dimensional nanomaterials, including one-dimensional (1D) nanowires/nanotubes and two-dimensional (2D) atomic layers such as graphene/phosphorene, growing interests and sustained effort have been devoted to creating mechanical devices toward the ultimate limit of miniaturization─genuinely down to the molecular or even atomic scale. These ultrasmall movable structures, particularly nanomechanical resonators that exploit the vibratory motion in these 1D and 2D nano-to-atomic-scale structures, offer exceptional device-level attributes, such as ultralow mass, ultrawide frequency tuning range, broad dynamic range, and ultralow power consumption, thus holding strong promises for both fundamental studies and engineering applications. In this Review, we offer a comprehensive overview and summary of this vibrant field, present the state-of-the-art devices and evaluate their specifications and performance, outline important achievements, and postulate future directions for studying these miniscule yet intriguing molecular-scale machines.

Quantitative probe for in-plane piezoelectric coupling in 2D materials.

Piezoelectric response in two-dimensional (2D) materials has evoked immense interest in using them for various applications involving electromechanical coupling. In most of the 2D materials, piezoelectricity is coupled along the in-plane direction. Here, we propose a technique to probe the in-plane piezoelectric coupling strength in layered nanomaterials quantitively. The method involves a novel approach for in-plane field excitation in lateral Piezoresponse force microscopy (PFM) for 2D materials. Operating near contact resonance has enabled the measurement of the piezoelectric coupling coefficients in the sub pm/V range. Detailed methodology for the signal calibration and the background subtraction when PFM is operated near the contact resonance of the cantilever is also provided. The technique is verified by estimating the in-plane piezoelectric coupling coefficients (d11) for freely suspended MoS2 of one to five atomic layers. For 2D-MoS2 with the odd number of atomic layers, which are non-centrosymmetric, finite d11 is measured. The measurements also indicate that the coupling strength decreases with an increase in the number of layers. The techniques presented would be an effective tool to study the in-plane piezoelectricity quantitatively in various materials along with emerging 2D-materials.

DNA Translocation through Vertically Stacked 2D Layers of Graphene and Hexagonal Boron Nitride Heterostructure Nanopore.

Cost-effective, fast, and reliable DNA sequencing can be enabled by advances in nanopore-based methods, such as the use of atomically thin graphene membranes. However, strong interaction of DNA bases with graphene leads to undesirable effects such as sticking of DNA strands to the membrane surface. While surface functionalization is one way to counter this problem, here, we present another solution based on a heterostructure nanopore system, consisting of a monolayer of graphene and hexagonal boron nitride (hBN) each. Molecular dynamics studies of DNA translocation through this heterostructure nanopore revealed a surprising and crucial influence of the heterostructure layer order in controlling the base specific signal variability. Specifically, the heterostructure with graphene on top of hBN had nearly 3-10× lower signal variability than the one with hBN on top of graphene. Simulations point to the role of differential underside sticking of DNA bases as a possible reason for the observed influence of the layer order. Our studies can guide the development of experimental systems to study and exploit DNA translocation through two-dimensional heterostructure nanopores for single molecule sequencing and sensing applications.

Laparoscopic modified lateral transabdominal preperitoneal approach for Spigelian hernia repair: An easier approach to a rare condition.

INTRODUCTION: Both laparoscopic and open approaches are well accepted for spigelian hernia (SH) repair. Several techniques for SH repair are described in literature. In our study, eight patients underwent laparoscopic SH repair. A modified lateral TAPP approach was used in four cases and then compared with the conventional TAPP approach. METHODS: From January 2015 to January 2017, eight cases of SH were treated using the laparoscopic TAPP approach. Four cases underwent surgery by the conventional laparoscopic TAPP approach (group I). For the other four, modified lateral approach transabdominal preperitoneal technique was used (group II). Postoperative pain, operative time, length of hospital stay, and complications were compared between the groups. Patients were followed up for a minimum period of 1 year. RESULT: Among the eight cases, the mean age was 52 years in group I and 50 years in group II, mean defect size was 23 mm in group I and 28 mm in group II, mean length of hospital stay was 1.50 days in group I and 1.25 days in group II, and operative time was 61 minutes in group I and 51 minutes in group II. There was no remarkable difference in complications or length of hospital stay between the groups. The groups were comparable in all other parameters, but the lateral approach was ergonomically better for the surgeon. CONCLUSION: Of the approaches described for laparoscopic SH repair, the modified lateral TAPP approach is more convenient because it provides better and more adequate lateral and inferior space access and is ergonomically better for surgeons.

An uncommon diagnosis of a common presentation of mass per rectum.

Introduction - In adults, protrusion of intussuscepted sigmoid growth through the anal canal is exceedingly rare, with only 9 cases being reported till date. Case Report - A 52-year old man presented to emergency department with what appeared to be an episode of rectal prolapse following straining while defaecating. On examination, he had a prolapsed 8 × 8 cm bowel, with a 2 × 2 cm friable villous growth as the lead point, with space between the mass and the perianal skin. Computed Tomography of the abdomen was done which was suggestive of telescoping of the sigmoid into the rectum protruding out through the anal canal with features of intestinal obstruction. He underwent exploratory laparotomy with sigmoidectomy with Hartman's Procedure. Post-operative period was uneventful. Histopathology was suggestive of moderately differentiated carcinoma. Discussion - In colo-anal intussusception, as was in our patient, the preferred approach is to reduce the intussusception before resection, to perform a sphincter saving operation as compared to an Abdominoperineal Resection (APR) otherwise. Conclusion -A high index of suspicion is important to diagnose and treat such cases early to avoid lethal outcomes by misdiagnosing it as simple rectal prolapse.

Automated Addressable Microfluidic Device for Minimally Disruptive Manipulation of Cells and Fluids within Living Cultures.

Cell culturing experiments are ubiquitous to the study of biology, development of new medical treatments, and the biomanufacturing industry. However, there are still major technological barriers limiting the advancement of knowledge and ballooning the experimental costs associated with these systems. For example, currently, it is difficult to perform nondisruptive monitoring and control of the cells in the cultured samples. This often necessitates the use of sacrificial assays and results in product inconsistency. To resolve these bottlenecks, we present a prototype "addressable" microfluidic technology capable of spatiotemporal fluid and cell manipulations within living cultures. As a proof-of-concept, we demonstrate its ability to perform additive manufacturing by seeding cells in spatial patterns (including co-culturing multiple cell types) and subtractive manufacturing by removing surface adherent cells via the focused flow of trypsin. Additionally, we show that the device can sample fluids and perform cell "biopsies" (which can be subsequently sent for ex situ analysis), from any location within its culture chamber. Finally, the on-chip plumbing is completely automated using external electronics. This opens the possibility of performing long-term computer-driven experiments, where the cell behavior is modulated in response to the minimally disruptive observations (e.g., fluid sampling and cell biopsies) throughout the entire duration of the cultures. A limitation of the presented α prototype is that it is only two-dimensional (2D). However, technology serves as a foundation for ultimately extending the concept to three-dimensional (3D). Another limitation of the device is that it is currently made from poly(dimethylsiloxane) (PDMS), while more work needs to be done to manufacture from a material that degrades away or allow the cells to lay down the tissue matrix. Unfortunately, the existing biodegradable materials are typically not strong enough for the fabrication of microfluidic valves. Hence, new ones need to be developed before this technology can become mainstream. Yet, it is the hope of the authors that this will be achieved soon, and the microfluidic plumbing technology will eventually be scaled up to 3D, to overcome the limitations of the conventional cell culturing platforms.

Combinatorial Large-Area MoS2/Anatase-TiO2 Interface: A Pathway to Emergent Optical and Optoelectronic Functionalities.

The interface of transition-metal dichalcogenides (TMDCs) and high-k dielectric transition-metal oxides (TMOs) had triggered umpteen discourses because of the indubitable impact of TMOs in reducing the contact resistances and restraining the Fermi-level pinning for the metal-TMDC contacts. In the present work, we focus on the unresolved tumults of large-area TMDC/TMO interfaces, grown by adopting different techniques. Here, on a pulsed laser-deposited MoS2 thin film, a layer of TiO2 is grown by atomic layer deposition (ALD) and pulsed laser deposition (PLD). These two different techniques emanate the layer of TiO2 with different crystallinities, thicknesses, and interfacial morphologies, subsequently influencing the electronic and optical properties of the interfaces. Contrasting the earlier reports of n-type doping at the exfoliated MoS2/TiO2 interfaces, the large-area MoS2/anatase-TiO2 films had realized a p-type doping of the underneath MoS2, manifesting a boost in the extent of p-type doping with increasing thickness of TiO2, as emerged from the X-ray photoelectron spectra. Density functional analysis of the MoS2/anatase-TiO2 interfaces, with pristine and interfacial defect configurations, could correlate the interdependence of doping and the terminating atomic surface of TiO2 on MoS2. The optical properties of the interface, encompassing photoluminescence, transient absorption and z-scan two-photon absorption, indicate the presence of defect-induced localized midgap levels in MoS2/TiO2 (PLD) and a relatively defect-free interface in MoS2/TiO2 (ALD), corroborating nicely with the corresponding theoretical analysis. From the investigation of optical properties, we indicate that the MoS2/TiO2 (PLD) interface may act as a promising saturable absorber, having a significant nonlinear response for the sub-band-gap excitations. Moreover, the MoS2/TiO2 (PLD) interface had exemplified better phototransport properties. A potential application of MoS2/TiO2 (PLD) is demonstrated by the fabrication of a p-type phototransistor with the ionic-gel top gate. This endeavor to analyze and perceive the MoS2/TiO2 interface establishes the prospectives of large-area interfaces in the field of optics and optoelectronics.

DNA Translocation through Hybrid Bilayer Nanopores.

Pore functionalization has been explored by several groups as a strategy to control DNA translocation through solid-state nanopores. Here we present a hybrid nanopore system consisting of single-layer graphene and a DNA origami layer to achieve base-selective control of DNA translocation rate through aligned nanopores of the two layers. This is achieved by incorporating unpaired dangling bases called overhangs to the origami near the pore region. Molecular dynamics simulations were used to optimize the design of the origami nanopore and the overhangs. Specifically, we considered the influence of the number and spatial distribution of overhangs on translocation times. The simulations revealed that specific interactions between the overhangs and the translocating single-stranded DNA resulted in base-specific residence times.

Single-particle mass spectrometry with arrays of frequency-addressed nanomechanical resonators.

One of the main challenges to overcome to perform nanomechanical mass spectrometry analysis in a practical time frame stems from the size mismatch between the analyte beam and the small nanomechanical detector area. We report here the demonstration of mass spectrometry with arrays of 20 multiplexed nanomechanical resonators; each resonator is designed with a distinct resonance frequency which becomes its individual address. Mass spectra of metallic aggregates in the MDa range are acquired with more than one order of magnitude improvement in analysis time compared to individual resonators. A 20 NEMS array is probed in 150 ms with the same mass limit of detection as a single resonator. Spectra acquired with a conventional time-of-flight mass spectrometer in the same system show excellent agreement. We also demonstrate how mass spectrometry imaging at the single-particle level becomes possible by mapping a 4-cm-particle beam in the MDa range and above.

Frequency fluctuations in silicon nanoresonators.

Frequency stability is key to the performance of nanoresonators. This stability is thought to reach a limit with the resonator's ability to resolve thermally induced vibrations. Although measurements and predictions of resonator stability usually disregard fluctuations in the mechanical frequency response, these fluctuations have recently attracted considerable theoretical interest. However, their existence is very difficult to demonstrate experimentally. Here, through a literature review, we show that all studies of frequency stability report values several orders of magnitude larger than the limit imposed by thermomechanical noise. We studied a monocrystalline silicon nanoresonator at room temperature and found a similar discrepancy. We propose a new method to show that this was due to the presence of frequency fluctuations, of unexpected level. The fluctuations were not due to the instrumentation system, or to any other of the known sources investigated. These results challenge our current understanding of frequency fluctuations and call for a change in practices.