Efficient Tin-Based Perovskite Solar Cells Enabled by Precisely Synthesized Single-Isomer Fullerene Bisadducts with Regulated Molecular Packing.

Designing and synthesizing fullerene bisadducts with a higher-lying conduction band minimum is promising to further improve the device performance of tin-based perovskite solar cells (TPSCs). However, the commonly obtained fullerene bisadduct products are isomeric mixtures and require complicated separation. Moreover, the isomeric mixtures are prone to resulting in energy alignment disorders, interfacial charge loss, and limited device performance improvement. Herein, we synthesized single-isomer C60- and C70-based diethylmalonate functionalized bisadducts (C60BB and C70BB) by utilizing the steric-hindrance-assisted strategy and determined all molecular structures involved by single crystal diffraction. Meanwhile, we found that the different solvents used for processing the fullerene bisadducts can effectively regulate the molecular packing in their films. The dense and amorphous fullerene bisadduct films prepared by using anisole exhibited the highest electron mobility. Finally, C60BB- and C70BB-based TPSCs showed impressive efficiencies up to 14.51 and 14.28%, respectively. These devices also exhibited excellent long-term stability. This work highlights the importance of developing strategies to synthesize single-isomer fullerene bisadducts and regulate their molecular packing to improve TPSCs' performance.

What Elements Really Intercalate into Pd Lattice When Heated in Dimethylformamide?

Palladium hydrides (PdHx) are pivotal in both fundamental research and practical applications across a wide spectrum. PdHx nanocrystals, synthesized by heating in dimethylformamide (DMF), exhibit remarkable stability, granting them widespread applications in the field of electrocatalysis. However, this stability appears inconsistent with their metastable nature. The substantial challenges in characterizing nanoscale structures contribute to the limited understanding of this anomalous phenomenon. Here, through a series of well-conceived experimental designs and advanced characterization techniques, including aberration-corrected scanning transmission electron microscopy (AC-STEM), in situ X-ray diffraction (XRD), and time-of-flight secondary ion mass spectrometry (TOF-SIMS), we have uncovered evidence that indicates the presence of C and N within the lattice of Pd (PdCxNy), rather than H (PdHx). By combining theoretical calculations, we have thoroughly studied the potential configurations and thermodynamic stability of PdCxNy, demonstrating a 2.5:1 ratio of C to N infiltration into the Pd lattice. Furthermore, we successfully modulated the electronic structure of Pd nanocrystals through C and N doping, enhancing their catalytic activity in methanol oxidation reactions. This breakthrough provides a new perspective on the structure and composition of Pd-based nanocrystals infused with light elements, paving the way for the development of advanced catalytic materials in the future.

'Passivated Precursor' Approach to All-Alkynyl-Protected Gold Nanoclusters and Total Structure Determination of Au130.

A 'passivated precursor' approach is developed for the efficient synthesis and isolation of all-alkynyl-protected gold nanoclusters. Direct reduction of dpa-passivated precursor Au-dpa (Hdpa=2,2'-dipyridylamine) in one-pot under ambient conditions gives a series of clusters including Au22(C≡CR)18 (R=-C6H4-2-F), Au36(C≡CR)24, Au44(C≡CR)28, Au130(C≡CR)50, and Au144(C≡CR)60. These clusters can be well separated via column chromatography. The overall isolation yield of this series of clusters is 40 % (based on gold), which is much improved in comparison with previous approaches. It is notable that the molecular structure of the giant cluster Au130(C≡CR)50 is revealed, which presents important information for understanding the structure of the mysterious Au130 nanoclusters. Theoretical calculations indicated Au130(C≡CR)50 has a smaller HOMO-LUMO gap than Au130(S-C6H4-4-CH3)50. This facile and reliable synthetic approach will greatly accelerate further studies on all-alkynyl-protected gold nanoclusters.

Soaking the Rare-Earth Carbonates for a Change: An Alternative Approach to Explore Carbonate Nonlinear Optical Crystals.

Alkali-metal rare-earth carbonates (ARECs) find great potential in nonlinear optical applications. As the most common method, the hydrothermal reaction is widely used in synthesizing ARECs. The black-box nature of the hydrothermal reaction makes it difficult for understanding the formation processes and therefore may slow down the pace of structural discovery. Here, by simply soaking the rare-earth carbonates in Na2CO3 solutions, we successfully obtain a series of noncentrosymmetric Na3RE(CO3)3·6H2O (RE = Tb 1, Sm 2, Eu 3, Gd 4, Dy 5, Ho 6, and Er 7) compounds without using the high-temperature hydrothermal method. The transformation process, investigated by powder X-ray diffraction and scanning electron microscopy, is governed by the concentration of the soaking solutions. Na3Tb(CO3)3·6H2O, as an example, is studied structurally, and its physical properties are characterized. It exhibits a second harmonic generation effect of 0.5 × KDP and a short UV cutoff edge of 222 nm (5.8 eV). Our study provides insights for exploring new AREC structures, which may further advance the development of carbonate nonlinear optical crystals.

Utilization of charged microdroplets for the controlled rapid synthesis of hollow sodium chloride single crystals.

Charged microdroplets are favored in microfluidic control, biomedicine, chemistry and materials processing due to their unique physicochemical environment, including interface double layers, high electric fields, surface concentration enrichment, and more. Herein, we investigated the crystallization of charged sodium chloride microdroplets and achieved the formation of hollow single crystals in a single-step process lasting only a few seconds, without the use of templates. Additionally, we discussed the plausible crystal growth mechanism, which appears to be an unconventional outward-inward growth process.

Chiroptical Activity Amplification of Chiral Metal Nanoclusters via Surface/Interface Solidification.

It remains a grand challenge to amplify the chiroptical activity of chiral metal nanoclusters (NCs) although it is desirable for fundamental research and practical application. Herein, we report a strategy of surface/interface solidification (SIS) for enhancing the chiroptical activity of gold NCs. Structural analysis of [Au19(2R,4R/2S,4S-BDPP)6Cl2]3+ (BDPP is 2,4-bis(diphenylphosphino)pentane) clusters reveals that one of the interfacial gold atoms is flexible between two sites and large space is present on the surface, thus hampering chirality transfer from surface chiral ligands to metal core and leading to low chiroptical activity. Following SIS by filling the flexible sites and replacing chlorides with thiolate ligands affords another pair of [Au20(2R,4R/2S,4S-BDPP)6(4-F-C6H4S)2]4+, which shows a more compact and organized structure and thus an almost 40-fold enhancement of chiroptical activity. This work not only provides an efficient approach for amplifying the chiroptical activity of metal nanoclusters but also highlights the significance of achiral components in shaping chiral nanostructures.

Self-assembled hydrated copper coordination compounds as ionic conductors for room temperature solid-state batteries.

As the core component of solid-state batteries, neither current inorganic solid-state electrolytes nor solid polymer electrolytes can simultaneously possess satisfactory ionic conductivity, electrode compatibility and processability. By incorporating efficient Li+ diffusion channels found in inorganic solid-state electrolytes and polar functional groups present in solid polymer electrolytes, it is conceivable to design inorganic-organic hybrid solid-state electrolytes to achieve true fusion and synergy in performance. Herein, we demonstrate that traditional metal coordination compounds can serve as exceptional Li+ ion conductors at room temperature through rational structural design. Specifically, we synthesize copper maleate hydrate nanoflakes via bottom-up self-assembly featuring highly-ordered 1D channels that are interconnected by Cu2+/Cu+ nodes and maleic acid ligands, alongside rich COO- groups and structural water within the channels. Benefiting from the combination of ion-hopping and coupling-dissociation mechanisms, Li+ ions can preferably transport through these channels rapidly. Thus, the Li+-implanted copper maleate hydrate solid-state electrolytes shows remarkable ionic conductivity (1.17 × 10-4 S cm-1 at room temperature), high Li+ transference number (0.77), and a 4.7 V-wide operating window. More impressively, Li+-implanted copper maleate hydrate solid-state electrolytes are demonstrated to have exceptional compatibility with both cathode and Li anode, enabling long-term stability of more than 800 cycles. This work brings new insight on exploring superior room-temperature ionic conductors based on metal coordination compounds.

Temperature-Dependent Separation of CO2 from Light Hydrocarbons in a Porous Self-Assembly of Vertexes Sharing Octahedra.

Design of flexible porous materials where the diffusion of guest molecules is regulated by the dynamics of contracted pore aperture is challenging. Here, a flexible porous self-assembly consisting of 1D channels with dynamic bottleneck gates is reported. The dynamic pendant naphthimidazolylmethyl moieties at the channel necks provide kinetic gate function, that enables unusual adsorption for light hydrocarbons. The adsorption for CO2 is mainly dominated by thermodynamics with the uptakes decreasing with increasing temperature, whereas the adsorptions for larger hydrocarbons are controlled by both thermodynamics and kinetics resulting in an uptake maximum at a temperature threshold. Such an unusual adsorption enables temperature-dependent separation of CO2 from the corresponding hydrocarbons.